[Vtigercrm-developers] Fwd: Re: Asterisk Connector & Asterisk 11

[Vic Cekvenich]

-------- Original Message --------
Subject: 	Re: [Vtigercrm-developers] Asterisk Connector & Asterisk 11
Date: 	Sat, 2 Aug 2014 11:55:59 +0000
From: 	Zebra Hosting <support at zebrahosting.eu>
Reply-To: 	vtigercrm-developers at lists.vtigercrm.com
To: 	vtigercrm-developers at lists.vtigercrm.com 
<vtigercrm-developers at lists.vtigercrm.com>



Could you please post your setups/snapshots  and possible solutions also 
here (without the PW of course)

I am still struggling with the exact same setup and did not even get it 
working as far as you did.


Bastiaan Houtkooper
Zebra Hosting



> On 2 aug. 2014, at 07:31, Rishab K <rishab.k at vtiger.com 
> <mailto:rishab.k at vtiger.com>> wrote:
>
> Hi,
>
> Can we have the following information,so that we can track down the 
> issue you are facing:
>
> 1. Vtiger Connector log files .
> 2. *VtigerAsteriskConnector.properties* file snapshot.
> 3. Asterisk *manager.conf* snapshot.
> 4. Asterisk *extension.conf* snapshot.
>
> Along with this can we have access to your Asterisk Server.
>
>
> On Sat, Aug 2, 2014 at 1:44 AM, vtiger at camden.net 
> <mailto:vtiger at camden.net> <vtiger at camden.net 
> <mailto:vtiger at camden.net>> wrote:
>
>
>     hello, thanks in advance for your help, is the Asterisk Connector
>     for 6.1 compatible with Asterisk 11
>
>     I have
>
>     PhP 5.4
>     Asterisk 11
>     AMI 1.3
>     FreePBX 2.11
>     Vtiger 6.1
>
>
>     when I click to call out of Vtiger my extension rings, when I pick
>     up it tries to connect the call to its self (am am sent to my own
>     busy VM, rather than number clicked on)
>
>     when I watch data from webapp.sh its says
>
>     unsupported Asterisk Call Manager/1.3 use at own risk
>     No event class registered for event type 'fullybooted'
>     Successfully logged in
>     Determined Asterisk version: Asterisk 1.6
>     Sending call originate request to asterisk
>     Context:from-internal
>     From: 101 -> To: XXXXXXXXXX  //where XXXXXXXXXX = the number
>     clicked in vtiger
>     Outgoing Call Response: Success
>     Asterisk Response: Originate successfully queued
>
>     then I get a lot of
>
>     Unable to set property 'connectedlinenum'
>
>
>     I have Activa for Asterisk install and click to call from outlook
>     works fine, so I know its not a calling commands from the AMI that
>     is a probelm... yes I have shut this down to make sure it was not
>     interfering with the vtiger connector
>
>
>     I get absolutely nothing in vtiger on a inbound attempt, no
>     pop-up, I dont see any data viewing the webapp.sh
>
>     I have seen in post the connector is for 1.8, but also seen it
>     should work with 11, no info on what AMI version
>
>
>     any help would be appreciated
>
>
>
>
>
>
>     _______________________________________________
>     http://www.vtiger.com/
>
>
> _______________________________________________
> http://www.vtiger.com/

-------------- next part --------------
_______________________________________________
http://www.vtiger.com/