From nithya at vtiger.com  Wed Nov  1 22:27:08 2006
From: nithya at vtiger.com (Nithya)
Date: Wed, 01 Nov 2006 22:27:08 -0800
Subject: [Vtigercrm-developers] Forum Moderation
Message-ID: <10ea7597a25.-7019041752458725766.5893219660014322383@@vtiger.com>

Hi Ken,

Thank you for your mail and valuable input.

We have been off late taking the operation of moving some of  our posts(issues) from forums to bugtrac as far as possible so that it is ticketed for developers' attention as soon as possible. Once we move it there, we lock these posts, so that the status of the issue can be seen in the trac itself. 

We have successfully completed moving all code contributions  and most of the other posts into HOw to's section of our WiKi Documentation  and locked it in forums.We are trying to maintain only general discussions in the main forums so that the forums are not flooded ,making our job simpler.

To lock a forum post, it can be done only by those with moderator priviliges.However, we will try and put a message as the last post , as you have rightly suggested.

And terribly sorry for the spam posts which you have had to cut off. We are trying desperately to do away with these unwarranted posts!

Please keep in touch with us.

Best Regards
Nithya

_______________________________________________________________________________________

Subject: 
[Vtigercrm-developers] Forum Moderation 
From: 
Ken Lyle <kenlyle at yahoo.com> 
Date: 
Mon, 30 Oct 2006 11:08:14 -0800 (PST) 
To: 
vTiger List <vtigercrm-developers at lists.vtigercrm.com> 

I've been moderating a bit, mainly deleting "girlie"
and "pharma" posts...I have seen a couple of minor
gripes about threads being locked.  I wonder whether
the board can be enhanced to show other moderators who
locked the thread, when and why?

Is it possible that threads can get locked by
accident?

Is this one locked, for example, because it's
superseded by another:
http://forums.vtiger.com/viewtopic.php?t=8932&postdays=0&postorder=asc&highlight=email&start=10

If so, it would be good to put a redirect message as
the last post before the thread is locked.

Just trying to get procedures down...

Thanks,
Ken

484-948-5706
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061101/c9ae9beb/attachment.htm

From fp at crm-now.de  Fri Nov  3 02:32:15 2006
From: fp at crm-now.de (Frank Piepiorra)
Date: Fri, 3 Nov 2006 11:32:15 +0100
Subject: [Vtigercrm-developers] Bugtracker needs configuration
In-Reply-To: <mailman.642.1161957249.4976.vtigercrm-developers@lists.vtigercrm.com>
Message-ID: <200611031027.kA3ARZD8005280@doko.im-netz.de>

If you use the bugtracker to report bugs you can choose 4.2 or 5.0.0 but not
5.0.1 or 5.0.2 as the vtiger version. Please add the new version so that
bugs can be assigned to the proper version.

Regards,


From allan.bush+vtiger_dev at gmail.com  Fri Nov  3 08:29:58 2006
From: allan.bush+vtiger_dev at gmail.com (Allan Bush)
Date: Fri, 3 Nov 2006 08:29:58 -0800
Subject: [Vtigercrm-developers] Bugtracker needs configuration
In-Reply-To: <200611031027.kA3ARZD8005280@doko.im-netz.de>
References: <mailman.642.1161957249.4976.vtigercrm-developers@lists.vtigercrm.com>
	<200611031027.kA3ARZD8005280@doko.im-netz.de>
Message-ID: <3bec26390611030829t48726a12qe6f032776ab16bdd@mail.gmail.com>

Thanks for the heads up.

The version/milestone options should be up to date now.  I'd be temped
to remove 5.0.0 and 5.0.1 as version options when creating new tickets
(as the issue may have been fixed with 5.0.2) but I'll leave that up
to the people working on 5.x.

On 11/3/06, Frank Piepiorra <fp at crm-now.de> wrote:
> If you use the bugtracker to report bugs you can choose 4.2 or 5.0.0 but not
> 5.0.1 or 5.0.2 as the vtiger version. Please add the new version so that
> bugs can be assigned to the proper version.
>
> Regards,
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com
>

From joe at tsolucio.com  Fri Nov  3 09:31:15 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Fri, 03 Nov 2006 18:31:15 +0100
Subject: [Vtigercrm-developers] new vtiger_entityname table
Message-ID: <1162575075.11542.23.camel@joesunix.int>

Hi,

What is the new vtiger_entityname table for?
Do we have to add entries to this table for our own modules (timecards,
projects,...)?
Do we have to update the wiki with this info?

Thanks, Joe
TSolucio


From dimitar.peev at gmail.com  Sat Nov  4 02:37:23 2006
From: dimitar.peev at gmail.com (Dimitar Peev)
Date: Sat, 4 Nov 2006 12:37:23 +0200
Subject: [Vtigercrm-developers] no authentication on soap
Message-ID: <3b0e87e10611040237s34d73f8cxdb40a94ceace157a@mail.gmail.com>

I see that it is possible to flood every installation of vtiger with
leads and contacts through the soap RPC, am I right? There is no
password whatsoever.

From kenlyle at yahoo.com  Sun Nov  5 06:45:59 2006
From: kenlyle at yahoo.com (Ken Lyle)
Date: Sun, 5 Nov 2006 06:45:59 -0800 (PST)
Subject: [Vtigercrm-developers] MySQL Migration Tool
Message-ID: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>

I just discovered on my computer the MySQL Migration
Tool, 1.1.4 rc.

This looks like a framework for doing database
transforms, like vTiger 4.2.3 to 5, or Sugar 4.x to
4.2.3 or 5.

This might be a more supportable way to deliver the
data migrations we need.

Ken

484-948-5706
866-OUT OF BOX
(866-688-6326)

-- 
"He who reads nothing is more educated than he who reads nothing but newspapers."  - Thomas Jefferson

From Dirk.Gorny at genion.de  Sun Nov  5 07:04:25 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Sun, 5 Nov 2006 16:04:25 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
Message-ID: <200611051604.25302.Dirk.Gorny@genion.de>

Am Sonntag, 5. November 2006 15:45 schrieb Ken Lyle:
> I just discovered on my computer the MySQL Migration
> Tool, 1.1.4 rc.

Why another tool? The more code, the more errors. The basic thing is to put 
one database struktur to annother. Our ancestry therfor developed SQL. Long 
time ago with applications which where more complex in database structure all 
things were done in SQL. This prevents of running out of memory or on 
timeouts by the *.php or whatever you use. And, the great benefit; you will 
get meaningful error messages which are not dumped by the overlying script.
So my recommendation:
Pure SQJ, as few as possible Loops and complex strukture.
Not referencing by attribute order. Ever referencing by attribute.
I know it is a boring idea, but for me it worked the last 20 Jears.

Best regards,

Dirk

From remco at artoge.nl  Sun Nov  5 07:24:38 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Sun, 5 Nov 2006 16:24:38 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <200611051604.25302.Dirk.Gorny@genion.de>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
Message-ID: <4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>

Hi all,

Well I agree partly, as MYSQL isn't the only database in place! As  
their are some who work with postgrssql instead, not to mention the  
possibility for Oracle or anything else.
If it's a tool to be used by many other sql databases fine, but as  
far as I know it's not.

Refering to Dirk question why another tool, I've been developing with  
another tool: see www.radicore.org because I prefer a even stronger  
splitup: in using 3-tier design architecture.
Although until now it's only been for customisation of VtigerCRM, I  
would love to see the base of 3-tier which is allready within  
VtigerCRM taken a few steps futher.

Ton introduce it futher with a
[quote from radicore website:]
3-Tier Architecture

An architectural pattern of software development in which the  
application logic is separated into different tiers or layers:

The Presentation Layer or User Interface, which all handles all  
communication with the user.
The Business Layer, which has a separate object for each business  
entity.
The Data Access Layer which communicates with the database.
This allows individual layers to be enhanced, or even replaced, with  
minimal impact on the other layers. For example it should be possible  
to change nothing but the contents of the presentation layer in order  
to switch from XHTML output to PDF output, or to change nothing but  
the contents of the data access layer in order to switch from one  
database engine to another.

[end quote]

Best regards, Remco




Op 5-nov-2006, om 16:04 heeft Dirk Gorny het volgende geschreven:

> Am Sonntag, 5. November 2006 15:45 schrieb Ken Lyle:
>> I just discovered on my computer the MySQL Migration
>> Tool, 1.1.4 rc.
>
> Why another tool? The more code, the more errors. The basic thing  
> is to put
> one database struktur to annother. Our ancestry therfor developed  
> SQL. Long
> time ago with applications which where more complex in database  
> structure all
> things were done in SQL. This prevents of running out of memory or on
> timeouts by the *.php or whatever you use. And, the great benefit;  
> you will
> get meaningful error messages which are not dumped by the overlying  
> script.
> So my recommendation:
> Pure SQJ, as few as possible Loops and complex strukture.
> Not referencing by attribute order. Ever referencing by attribute.
> I know it is a boring idea, but for me it worked the last 20 Jears.
>
> Best regards,
>
> Dirk
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061105/4d7844fb/attachment.html

From acc at anthonychavez.org  Sun Nov  5 13:42:43 2006
From: acc at anthonychavez.org (Anthony Chavez)
Date: Sun, 05 Nov 2006 14:42:43 -0700
Subject: [Vtigercrm-developers] Customer portal sending wrong URL
Message-ID: <87mz75d0z0.fsf@hephaistos.aegaeum.anthonychavez.org>

vtigercrm-developers:

It would appear that version 5.0.0 of the Customer Portal (on FreeBSD
6.1-RELEASE-p3, Apache 2.2.3, and PHP 5.1.6) is not sending the
correct URL in emails.  Here is an example, which results in 404:

https://mydomain.com/vtiger/customerportal/general.php?action=UserTickets&ticketid=236&fun=detail

general.php does not exist anywhere in my vtiger tree.  Did I neglect
to install it, or has it been removed since version 4.x?

Thanks.

-- 
Anthony Chavez                                 http://anthonychavez.org/
mailto:acc at anthonychavez.org         jabber:acc at jabber.anthonychavez.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 480 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061105/b6da2111/attachment.pgp

From Dirk.Gorny at genion.de  Sun Nov  5 23:22:15 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Mon, 6 Nov 2006 08:22:15 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
Message-ID: <200611060822.15947.Dirk.Gorny@genion.de>

Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:

> Refering to Dirk question why another tool, I've been developing with
> another tool: see www.radicore.org because I prefer a even stronger
> splitup: in using 3-tier design architecture.
> Although until now it's only been for customisation of VtigerCRM, I
> would love to see the base of 3-tier which is allready within
> VtigerCRM taken a few steps futher.

Hello Remco,

Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier architecture not 
the same thing than putting a new 300HP engine in an old Volkswagen Beetle?
There are better things to deal with a 3-tier architecture.
For exaple using a application server like Jboss and you get rid of much 
security issuees by having all those connectors and process encapsulation 
allready there.
I had worked a little with openCRX (http://www.opencrx.org/) wich has to my 
mind the best architecture (MDA) but must become user-friendly which 
vtigercrm is. In my opinion vtigercrm has to do a stronger encapsulating of 
the modules and building a crm-core as an interface for the Modules. But I am 
not shure if this is actually possible with php. At the end you have another 
application server.

Best regards,

Dirk

From remco at artoge.nl  Sun Nov  5 23:42:40 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 6 Nov 2006 08:42:40 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <200611060822.15947.Dirk.Gorny@genion.de>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
	<200611060822.15947.Dirk.Gorny@genion.de>
Message-ID: <07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>

Hi Dirk,


Well to use your metafor:
If you would use php 3 it would be: an old beetle with a new engine.
But as we're using php 5 it's the new beetle with a new engine.
Indeed it's possible but not easy to build, and I agree again partly:
As I'm using a hosted service for vtigercrm: it's only used for crm,  
in that way it's in my mind all ready an application server.
I will have to look into openCRX before I respond to the rest aswell.

Best regards and learning :-)

Remco



Op 6-nov-2006, om 8:22 heeft Dirk Gorny het volgende geschreven:

> Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:
>> Refering to Dirk question why another tool, I've been developing with
>> another tool: see www.radicore.org because I prefer a even stronger
>> splitup: in using 3-tier design architecture.
>> Although until now it's only been for customisation of VtigerCRM, I
>> would love to see the base of 3-tier which is allready within
>> VtigerCRM taken a few steps futher.
>
> Hello Remco,
>
> Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier  
> architecture not
> the same thing than putting a new 300HP engine in an old Volkswagen  
> Beetle?
> There are better things to deal with a 3-tier architecture.
> For exaple using a application server like Jboss and you get rid of  
> much
> security issuees by having all those connectors and process  
> encapsulation
> allready there.
> I had worked a little with openCRX (http://www.opencrx.org/) wich  
> has to my
> mind the best architecture (MDA) but must become user-friendly which
> vtigercrm is. In my opinion vtigercrm has to do a stronger  
> encapsulating of
> the modules and building a crm-core as an interface for the  
> Modules. But I am
> not shure if this is actually possible with php. At the end you  
> have another
> application server.
>
> Best regards,
>
> Dirk
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com


From lists.vtigercrm.com at callum-macdonald.com  Mon Nov  6 04:19:12 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Mon, 06 Nov 2006 19:19:12 +0700
Subject: [Vtigercrm-developers] Field cascade from Account to Contact
Message-ID: <454F2840.6030907@callum-macdonald.com>

Hey Guys,

Does anyone know if it's possible to have Account Type available as a 
field in a contact's record? So you could filter contacts according to 
Account Type, etc. If not, any suggestions on how we'd best achieve 
this? I can see a couple of options...

1) Create a custom field in Contacts and hack vtiger to automatically 
update the field every time an account field is changed. Potentially nasty.

2) Hack the sql to join the field in and add it to the result set. Again 
potentially nasty.

Suggestions most welcome on a postcard... :)

Cheers,


Callum.


From remco at artoge.nl  Mon Nov  6 08:57:02 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 6 Nov 2006 17:57:02 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
	<200611060822.15947.Dirk.Gorny@genion.de>
	<07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
Message-ID: <F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>

Well,

Reading a bit more:
http://www-128.ibm.com/developerworks/rational/library/may05/brown/ 
index.html

It makes sence: radicore.org is a usefull part for an MDA approche.  
Read for example, in the above url: Using MDA to customize a solution  
framework

And yes with a stronger encapsulating of the modules and building a  
crm-core as an interface for the Modules.
You can have another application server with php.

But I must state aswell that I do hope to see that's we'll still  
provide php only as wamp/lamp solution.
As said before, that's all I need :-)
If all this could help to improve the product let's then use it.


@Dirk, could you give us your idea's on more specific improvements,  
compared with openCRX?



Best regards,

Remco




Op 6-nov-2006, om 8:42 heeft Dhr. R.R. Gerbrands het volgende  
geschreven:

> Hi Dirk,
>
>
> Well to use your metafor:
> If you would use php 3 it would be: an old beetle with a new engine.
> But as we're using php 5 it's the new beetle with a new engine.
> Indeed it's possible but not easy to build, and I agree again partly:
> As I'm using a hosted service for vtigercrm: it's only used for crm,
> in that way it's in my mind all ready an application server.
> I will have to look into openCRX before I respond to the rest aswell.
>
> Best regards and learning :-)
>
> Remco
>
>
>
> Op 6-nov-2006, om 8:22 heeft Dirk Gorny het volgende geschreven:
>
>> Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:
>>> Refering to Dirk question why another tool, I've been developing  
>>> with
>>> another tool: see www.radicore.org because I prefer a even stronger
>>> splitup: in using 3-tier design architecture.
>>> Although until now it's only been for customisation of VtigerCRM, I
>>> would love to see the base of 3-tier which is allready within
>>> VtigerCRM taken a few steps futher.
>>
>> Hello Remco,
>>
>> Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier
>> architecture not
>> the same thing than putting a new 300HP engine in an old Volkswagen
>> Beetle?
>> There are better things to deal with a 3-tier architecture.
>> For exaple using a application server like Jboss and you get rid of
>> much
>> security issuees by having all those connectors and process
>> encapsulation
>> allready there.
>> I had worked a little with openCRX (http://www.opencrx.org/) wich
>> has to my
>> mind the best architecture (MDA) but must become user-friendly which
>> vtigercrm is. In my opinion vtigercrm has to do a stronger
>> encapsulating of
>> the modules and building a crm-core as an interface for the
>> Modules. But I am
>> not shure if this is actually possible with php. At the end you
>> have another
>> application server.
>>
>> Best regards,
>>
>> Dirk
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061106/d2e0f462/attachment.html

From joel.rydbeck at nubrek.com  Mon Nov  6 21:08:12 2006
From: joel.rydbeck at nubrek.com (Joel Rydbeck)
Date: Mon, 6 Nov 2006 23:08:12 -0600
Subject: [Vtigercrm-developers] 4.2 development
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com><200611051604.25302.Dirk.Gorny@genion.de><4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl><200611060822.15947.Dirk.Gorny@genion.de><07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
Message-ID: <64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>

Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
 
- Joel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 3212 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061106/2b038104/attachment-0001.bin

From nolan at peaceworks.ca  Mon Nov  6 21:19:27 2006
From: nolan at peaceworks.ca (Nolan Andres)
Date: Tue, 07 Nov 2006 00:19:27 -0500
Subject: [Vtigercrm-developers] 4.2 development
In-Reply-To: <64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com><200611051604.25302.Dirk.Gorny@genion.de><4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl><200611060822.15947.Dirk.Gorny@genion.de><07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
	<64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>
Message-ID: <4550175F.30105@peaceworks.ca>

I'm interested, but can't be counted on for a lot of contributions. I'd 
be willing to take on issue 1507 (partial matches in searches), though, 
if that would be useful.

peace,
Nokes

Joel Rydbeck wrote:
> Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
>  
> - Joel
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 

From grahama at add-ons.co.uk  Mon Nov  6 23:58:35 2006
From: grahama at add-ons.co.uk (grahama@add-ons.co.uk)
Date: Tue, 7 Nov 2006 07:58:35 +0000 (GMT)
Subject: [Vtigercrm-developers] 4.2 development
Message-ID: <865798.1162886315797.JavaMail.wibapp@vuk1120.visto-mgmt.com>

Joel

We are still on 4.x and because of the many custom requirements we have, we will remain for sometime.

We are also using mysql, would you say that a move to postgres would be beneficial ? What benefits have you seen?

Many thanks....any comments welcome.

Graham 

-----Original Message-----
From: "Joel Rydbeck" <joel.rydbeck at nubrek.com>
To: "vtigercrm-developers at lists.vtigercrm.com" <vtigercrm-developers at lists.vtigercrm.com>
Sent: 07/11/06 05:07
Subject: 4.2 development

Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
 
- Joel


From dgrant at accuratetechnologies.com  Tue Nov  7 09:02:45 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 7 Nov 2006 12:02:45 -0500
Subject: [Vtigercrm-developers] profileGlobalPermission
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4D88@exch.accuratetechnologies.com>

OK gang, I've been beating my head against this for a while and I'm
starting to get frustrated.

 

Here is the issue: 

 

1)         in the ListView for TroubleTickets, some users can see
TicketID and some cannot (the requirement is that all users can see
them)

 

2)         There is no place in the field permissions editor for Ticket
ID (or crmid, for that matter)

 

3)         Certain profiles CAN see TicketID; some cannot.

 

4)         The difference between those profiles that can see ticketID
is that they have $profileGlobalPermission[1] set to 0, where those that
cannot see TicketID have $profileGlobalPermission[1] set to 1;

 

5)         I think I've found where in the code the test is made - if
you have $is_admin true OR $profileGlobalPermission[1]==0, then you get
the full field list for that module/tab. Otherwise, there's a
complicated query that pulls down allowed fields.

 

6)         I have not (yet) found where $profileGlobalPermission[1] is
set

 

7)         I have not (yet) found how to add TicketID to a list of
permissions where $profileGlobalPermission[1] == 0;

 

I think being able to do #7 - and being to do it via the security
interface - is the ultimate goal here.

 

Can somebody PLEASE explain how this all interacts, before I go crazy?

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061107/980beb25/attachment.html

From joe at tsolucio.com  Tue Nov  7 12:59:04 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 07 Nov 2006 21:59:04 +0100
Subject: [Vtigercrm-developers]  profileGlobalPermissions
Message-ID: <1162933144.8036.11.camel@joeshome.int>

Hi Dennis,

I have seen that the $profileGlobalPermissions array is set in the users
corresponding user_privileges_id.php file (in the corresponding
directory). This file is created in the CreateUserPrivilegeFile function
in a script of the same name in modules/Users directory. I don't know
when the function is called but I suppose that it is when you create a
user.

This function calls getCombinedUserGlobalPermission and this one calls
getProfileGlobalPermission which accesses the table
vtiger_profile2globalpermissions where the profiles Global Access
Privileges are assigned.

So I think that those profiles that are working must have the Global
Privileges set to ALL and the others don't.

I suppose that if you change the values in the database, which is
equivalent to changing the profiles value you may get VT working in a
way that you don't want. I think you will have to look at another way of
adding the ticketid to the view. Probably playing with the SQL command.

What I did was create my own ticketid field which autoincrements with
code based on that available in the forums (I can send you my version if
you want) and I use this field instead of VT's ticketid.

Sorry I couldn't be of more help.

Regards, Joe
TSolucio


From dfar2008 at gmail.com  Tue Nov  7 20:27:26 2006
From: dfar2008 at gmail.com (ding jianting)
Date: Wed, 8 Nov 2006 12:27:26 +0800
Subject: [Vtigercrm-developers] dashboard bug
Message-ID: <fb148e2a0611072027v4c54a095q575306bf3c23bc89@mail.gmail.com>

Hi,all
I found error msg "No data available with the specified time period"  in
Dashboard module. I cracked code and found $this->module_id,module_name are
invoked by process_full_list_query function of CRMEntity Bean. But there are
no module_id,module_name fields in Potentails bean. Two fields exists in
5.0.1. So I added module_id,module_name field in Potentials.php.
Dashboard module works properly again.

another bug about report module:
AdvancedFilter.php getSecondaryColumns_AdvFilterHTML function:
from:
if(isset($mod_strings[$fieldlable]))
to:
if(isset($mod_strings[$fieldlabel]))

If any problem, pls let me know.

Thanks and regards

-- 
DingJianting
________________________________________
中国开源客户关系管理系统: http://www.c3crm.com
-----------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061108/2bd6b40e/attachment.htm

From lists.vtigercrm.com at callum-macdonald.com  Tue Nov  7 20:46:31 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Wed, 08 Nov 2006 11:46:31 +0700
Subject: [Vtigercrm-developers] Release naming
Message-ID: <45516127.4030306@callum-macdonald.com>

Hi Guys,

I think the naming of releases should be simplified. I suggest Joomla 
provides a good template to use (with one or two improvements):
http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11

vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
from what version you can apply patch 2, and so on. I suggest we use the 
same method as Joomla. When a new version is released (5.0.2) then the 
following files are released:
vtigercrm-5.0.0-to-5.0.2-patch.zip
vtigercrm-5.0.1-to-5.0.2-patch.zip
vtigercrm-5.0.2-full-windows.exe
vtigercrm-5.0.2-full-linux.bin
vtigercrm-5.0.2-full-lamp.tgz

<http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
think it's important to include the windows/linux/lamp in the file name. 
I know it's obvious from the extension to MOST people, but not to everyone.

I also think these files should all be released in the same package in 
sourceforge. In my opinion, splitting the full and patch releases is 
confusing.

I think this is a HUGELY important issue, as important as the recent 
heated debate over the naming of the GA release.

Comments on a postcard...


Callum.

From ncknight at pacific.net.sg  Tue Nov  7 21:41:07 2006
From: ncknight at pacific.net.sg (Nicholas Chan)
Date: Wed, 08 Nov 2006 13:41:07 +0800
Subject: [Vtigercrm-developers] Release naming
In-Reply-To: <45516127.4030306@callum-macdonald.com>
References: <45516127.4030306@callum-macdonald.com>
Message-ID: <45516DF3.20809@pacific.net.sg>

I just found it odd that the naming issue is still being discussed till
today. Why isn't the standard set and enforced already?

Callum Macdonald wrote:
> Hi Guys,
>
> I think the naming of releases should be simplified. I suggest Joomla 
> provides a good template to use (with one or two improvements):
> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11
>
> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
> from what version you can apply patch 2, and so on. I suggest we use the 
> same method as Joomla. When a new version is released (5.0.2) then the 
> following files are released:
> vtigercrm-5.0.0-to-5.0.2-patch.zip
> vtigercrm-5.0.1-to-5.0.2-patch.zip
> vtigercrm-5.0.2-full-windows.exe
> vtigercrm-5.0.2-full-linux.bin
> vtigercrm-5.0.2-full-lamp.tgz
>
> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
> think it's important to include the windows/linux/lamp in the file name. 
> I know it's obvious from the extension to MOST people, but not to everyone.
>
> I also think these files should all be released in the same package in 
> sourceforge. In my opinion, splitting the full and patch releases is 
> confusing.
>
> I think this is a HUGELY important issue, as important as the recent 
> heated debate over the naming of the GA release.
>
> Comments on a postcard...
>
>
> Callum.
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
>   


From jtk at yahoo.com  Tue Nov  7 22:38:26 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Wed, 08 Nov 2006 01:38:26 -0500
Subject: [Vtigercrm-developers] Release naming
References: <45516127.4030306@callum-macdonald.com>
Message-ID: <pan.2006.11.08.06.38.24.169176@yahoo.com>

Callum Macdonald wrote:
> I think the naming of releases should be simplified. vtiger 5 patch 2
> and vtiger 5.0.2 are confusing names. It is not clear from what version
> you can apply patch 2, and so on. I suggest we use the same method as
> Joomla. When a new version is released (5.0.2) then the following files
> are released:
>
> I also think these files should all be released in the same package in
> sourceforge. In my opinion, splitting the full and patch releases is
> confusing.

Just an opinion, but I don't think vtigercrm should concern itself with
(or release) anything except pure-source, verbatim-to-the-svn-tag tar.gz
and .zip releases.

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseNaming
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseProcedure

Binary installers, patch-overlay releases, these are all the things
that third-party packagers do according to their own standards. We don't
want those problems. Packagers have the expertise and the ultimate
responsibility to do final-installation correctly for their security
strategy. What they need from the vtigercrm team is a rock-solid tarball
with a predictable layout, at a predictable unique URL, happening the same
way with every major, minor and bugfix release.

vtigercrm releases should be tailored for a primary consumer audience of
system packagers, and a secondary audience of expert manual install
aficionados who are willing to obsessively merge the unpacked source tree
to their own customized installation, and additionally set file
permissions, etc, according to a well-documented INSTALL.txt.


From remco at artoge.nl  Wed Nov  8 03:30:17 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Wed, 8 Nov 2006 12:30:17 +0100
Subject: [Vtigercrm-developers] Release naming
In-Reply-To: <45516DF3.20809@pacific.net.sg>
References: <45516127.4030306@callum-macdonald.com>
	<45516DF3.20809@pacific.net.sg>
Message-ID: <B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>

@ Nicholas,

If you find it odd, you might want to wait using vtigercrm as we're  
in the process of becoming mature.

@ Callum,

What you are refering to is not release naming to my idea.
But package naming.
I think that's a bit confusing for more people,
The release naming is still the same, in you example 5.0.2,
depending on the target platform is you're suggested packet naming.

I can agree with it, yet as our user are no newbee's the naming as  
stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
ReleaseNaming
is enough, I would suggest adding a wiki page for the newbee's who  
doesn't know what to download instead.

Best regards,

Remco




Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:

> I just found it odd that the naming issue is still being discussed  
> till
> today. Why isn't the standard set and enforced already?
>
> Callum Macdonald wrote:
>> Hi Guys,
>>
>> I think the naming of releases should be simplified. I suggest Joomla
>> provides a good template to use (with one or two improvements):
>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/ 
>> frs.joomla_1_0.1_0_11
>>
>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not  
>> clear
>> from what version you can apply patch 2, and so on. I suggest we  
>> use the
>> same method as Joomla. When a new version is released (5.0.2) then  
>> the
>> following files are released:
>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>> vtigercrm-5.0.2-full-windows.exe
>> vtigercrm-5.0.2-full-linux.bin
>> vtigercrm-5.0.2-full-lamp.tgz
>>
>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0- 
>> patch2.zip?download>I
>> think it's important to include the windows/linux/lamp in the file  
>> name.
>> I know it's obvious from the extension to MOST people, but not to  
>> everyone.
>>
>> I also think these files should all be released in the same  
>> package in
>> sourceforge. In my opinion, splitting the full and patch releases is
>> confusing.
>>
>> I think this is a HUGELY important issue, as important as the recent
>> heated debate over the naming of the GA release.
>>
>> Comments on a postcard...
>>
>>
>> Callum.
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>
>>
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061108/b9c3bc42/attachment.html

From joe at tsolucio.com  Wed Nov  8 15:50:30 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Thu, 09 Nov 2006 00:50:30 +0100
Subject: [Vtigercrm-developers] vtiger popup calendar start day of the week
Message-ID: <1163029830.28710.8.camel@joeshome.int>

Hi,

I tried to get the VT calendar start on monday instead of sunday. I
found the code very hard to follow and, to my surprise, there was no
variable whose value I could change to get the calendar start on monday.
As I did for the javascript calendar changing the variable firstDay.

I finaly add a bit of code to the modules/Calendar/Calendar.php

I changed line 111
   $num_of_prev_days = $firstday_of_month->dayofweek;

to
   $num_of_prev_days = ($firstday_of_month->dayofweek==0 ? 6 :
$firstday_of_month->dayofweek-1);

And the same for year. I changed line 127
  $noof_prevdays = $firstday_of_month->dayofweek;

to
  $noof_prevdays = ($firstday_of_month->dayofweek==0 ? 6 :
$firstday_of_month->dayofweek-1);

This seems to be working fine but I really don't know what I am doing.
 Does this break other things?
 Will I start getting activities and notifications on the wrong dates?
 Is there really no global variable I can change to get the calendar
start on monday?

Any comments would be greatly appreciated.

Thanks, Joe
TSolucio



From leandro at oriontek.org  Wed Nov  8 19:12:01 2006
From: leandro at oriontek.org (Leandro Rache Sanchez)
Date: Wed, 8 Nov 2006 22:12:01 -0500
Subject: [Vtigercrm-developers] vtiger 5.0.0 to vtiger 5.0.2
Message-ID: <200611082212.01724.leandro@oriontek.org>

Hi developers,
I tried to install vtiger 5.0.2 from SVN and this ok, but i need to update 
vtiger 5.0.0 to vtiger 5.0.2, some simply copy paste from SVN soesn't work, 
please help me with some script for this update.

Thanks, 
-- 

   ~     Leandro Rache Sanchez
 (. .)   leandro at oriontek.org
  \V/      
 //"\\   Corporacion Tecnol?gica ORION.
/( ' )\  info at oriontek.org
 ^*-*^   http://www.oriontek.org/orion/
---------------------------------------



From gopals at vtiger.com  Thu Nov  9 05:32:58 2006
From: gopals at vtiger.com (Gopal)
Date: Thu, 09 Nov 2006 19:02:58 +0530
Subject: [Vtigercrm-developers] Announcement: Richie's Europe Trip Schedule..
Message-ID: <45532E0A.4050709@vtiger.com>

Dear Team,

I am pleased to inform you all that Richie's Europe trip has been 
finalized.

He will be reaching *UK* before 11th Nov and start visiting our user 
community and partners from 12th of Nov. In UK he will stay for about 10 
days time. Based on the community needs he will extend his stay for 3 to 
4 days.

Next, he will be going to *Germany* or *France* for around 20 days stay 
where he will visit our community & business partners in various cities. 
In *France* he will be attending an Open Source Competition as a Jury 
member (Nov 30th and 31st).

http://www.tropheesdulibre.org/index.php?module=4&action=3

His stay in France for 10 to 15 days period in depending up on the 
community requirements. He will also visit other *Schengen* countries 
depending on the community demand.

*/I would like to request you all to let us know your convenient place & 
time to meet Richie. In each country he would like meet most of our 
community members.

/*Please drop a mail directly to *richie at vtiger.com* (and CC to 
gopals at vtiger.com) with the following information:

    * Place
    * Convenient Time
    * Address & Phone No

Looking forward for your kind cooperation for making vtiger's first trip 
to Europe a successful one!

Best Regards,
*Gopal
vtiger Team*
---
S.S.G.Gopal
+1 925 965 6387
Skype: sripadag
blog: http://blogs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061109/69cf1fb5/attachment.htm

From kenlyle at yahoo.com  Thu Nov  9 07:15:20 2006
From: kenlyle at yahoo.com (Ken Lyle)
Date: Thu, 9 Nov 2006 07:15:20 -0800 (PST)
Subject: [Vtigercrm-developers] Being Good Tool Users
Message-ID: <20061109151520.49889.qmail@web37312.mail.mud.yahoo.com>

Community Engagement and Bug Fix Case Study:

http://forums.vtiger.com/viewtopic.php?t=10811

I submitted a simple one file patch on October 31.
That fix is stuck in the middle of the forum thread at
the bottom of page 3.

**Can I make a post within a thread Starred, Featured,
Sticky?  That would seem like a good thing in this
case.

***Some people have reported that it works, some
people have other issues.  It appears that we have NO
STRUCTURED mechanism for capturing the fact that there
is a candidate fix, and what versions and operating
systems on which the fix was successful or
unsuccessful.

Furthermore, we don't seem to have a way of tracking
the 'credibility' of each report.  Ideally, we could
score these like so:

Senior Users: 90% fix rate
Intermediate Users: 60% fix rate
Noob Users: 50% fix rate

>From this example, I would assume that the fix is
good, for the versions where the Senior Users report a
fix rate over 80%, and the rest is user error.

Back to the story....Today, 10 days later (Is that
good? It gives time to get feedback, but wastes time
of people who have a hard time finding the
fix)...Nithya moved this to TRAC,
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/ticket/2578
, and posted a link to the 
thread above, but it's not obvious that you have to go
to page 3 to find the patch.  There's no way in the
forum to filter just posts with attachments....see **

SO, I posted the patch to the TRAC ticket.  But not
everyone has access to TRAC, I think.  FURTHER, when I
go to the TRAC page,
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report ,
not logged in (public), I can't SEARCH

How can I determine whether the bug that I am
considering posting has already been posted?  Even if
I click Active Tickets, 
there is No Search.  I don't believe that everyone
knows about Ctrl+F (Firefox).

IF we had ***, either in PHPBB or TRAC, then we could
confidently LOCK the forum thread with a single
redirect to the TRAC ticket.

SO, here is an idea...

SEARCH in the Forums seems broken...why, when I search
for "Incoming Email" is the thread above 6th, behind
less relevant threads?

Assuming that THAT can be fixed...perhaps, when there
is a candidate fix for a bug, there should be a POLL
created that runs for a certain period...after which,
if more than X% report success, the thread is locked,
and  
a Starred, Featured, Sticky redirect to the TRAC
ticket placed atop the thread.  This would save
everyone time...

I am a Moderator, where is the ability to create a
Poll?  I would like to try this concept...

Second, maybe TRAC is a better place to collect
Operating System and version information for each bug
and candidate fix.  Who can add these 
fields?

This would also provide us usage data, right?  I know
Sugar has that thing that collects usage data, which I
would guess includes O/S, # of records,
etc.  If we know what configurations people are using,
we can better isolate bugs...In fact, I can't really
imagine trying to do it without that info.

How can we even set priorities without knowing, for
example, "There are 10 users with Bug #XXXX, but they
are all running Red Hat 7".  Then we can issue
a statement that Red Hat 7 is not an officially
supported platform, but Good Luck anyway....

I think it's important to realize that if we can save
120 people 30 seconds every day, we can get an extra
hour that can be 
used to improve vTiger.

I offer a challenge to all of you.....to select tools
and use them in a way that accurately reflects the
talent and intelligence of this group, because, right
now, it does not, IMNSHO (In My Not So Humble
Opinion).  

AND, of course, the Core Team should avoid shipping
critical modules in a broken state.

I want to help this effort, but become disheartened
when it looks like nobody is thinking systematically,
and there is no documentation sufficient
to guide a reasonably bright person in how to
contribute...I'll contribute some of that next, partly
based on feedback to this thread.

I've put hours into composing this, and would like to
see something come of it...

Thanks,
Ken

484-948-5706
866-OUT OF BOX
(866-688-6326)

-- 
"He who reads nothing is more educated than he who reads nothing but newspapers."  - Thomas Jefferson

From jens at Strawberry.COM  Thu Nov  9 11:43:48 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Thu, 9 Nov 2006 20:43:48 +0100
Subject: [Vtigercrm-developers] Announcement: Richie's Europe Trip
	Schedule..
In-Reply-To: <45532E0A.4050709@vtiger.com>;
	from Gopal on Thu, Nov 09, 2006 at 07:02:58PM +0530
References: <45532E0A.4050709@vtiger.com>
Message-ID: <20061109204348.A13058@Strawberry.COM>

Hi,

End of November/Beginnig of December would be fine for me all the
time. My location is Munich/Germany. I'd may pick up Richie at the
munich airport and arrange a hotel room for him here in my town.


My address is

    Strawberry EDV Systeme GmbH
    Jens Hamisch - CEO
    Am Flosskanal 9a
    D-82515 Wolfratshausen
    Tel.: +49 8171 41805-0


You may contact me or our my colleque Mrs. Westermann to clarify the
details.


Jens




On Thu, Nov 09, 2006 at 07:02:58PM +0530, Gopal wrote:
> Dear Team,
> 
> I am pleased to inform you all that Richie's Europe trip has been 
> finalized.
> 
> He will be reaching *UK* before 11th Nov and start visiting our user 
> community and partners from 12th of Nov. In UK he will stay for about 10 
> days time. Based on the community needs he will extend his stay for 3 to 
> 4 days.
> 
> Next, he will be going to *Germany* or *France* for around 20 days stay 
> where he will visit our community & business partners in various cities. 
> In *France* he will be attending an Open Source Competition as a Jury 
> member (Nov 30th and 31st).
> 
> http://www.tropheesdulibre.org/index.php?module=4&action=3
> 
> His stay in France for 10 to 15 days period in depending up on the 
> community requirements. He will also visit other *Schengen* countries 
> depending on the community demand.
> 
> */I would like to request you all to let us know your convenient place & 
> time to meet Richie. In each country he would like meet most of our 
> community members.
> 
> /*Please drop a mail directly to *richie at vtiger.com* (and CC to 
> gopals at vtiger.com) with the following information:
> 
>     * Place
>     * Convenient Time
>     * Address & Phone No
> 
> Looking forward for your kind cooperation for making vtiger's first trip 
> to Europe a successful one!
> 
> Best Regards,
> *Gopal
> vtiger Team*
> ---
> S.S.G.Gopal
> +1 925 965 6387
> Skype: sripadag
> blog: http://blogs.vtiger.com

> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      


From natan.pereira at fator9.com  Fri Nov 10 09:26:28 2006
From: natan.pereira at fator9.com (natan.pereira@fator9.com)
Date: Fri, 10 Nov 2006 15:26:28 -0200
Subject: [Vtigercrm-developers] Adding a new field with radio button
Message-ID: <20061110152628.uw0gorykx0g088wk@webmail.fator9.com>

I am having some problems with a new field, what I want is:

Add two radios buttons (when I am registring a new Lead), that when  
one is selected  appers a especific field and when the other is  
selected appers other especific field.

I know how to do a field in database, but I dont know how to do the  
radio button and where I will put de progamming (if clause).

I will be glad with somebody could help me...


From neil.temperley at exemail.com.au  Mon Nov 13 02:27:24 2006
From: neil.temperley at exemail.com.au (Neil Temperley)
Date: Mon, 13 Nov 2006 21:27:24 +1100
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items and
	general column layout
In-Reply-To: <45532E0A.4050709@vtiger.com>
Message-ID: <000901c7070e$4fc70c90$6401a8c0@Nemrut>

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtiger-Neil.tar.gz
Type: application/x-gzip
Size: 88018 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061113/b242a0d8/vtiger-Neil.tar-0001.bin

From lists.vtigercrm.com at callum-macdonald.com  Mon Nov 13 04:24:00 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Mon, 13 Nov 2006 19:24:00 +0700
Subject: [Vtigercrm-developers] Release naming (package naming)
In-Reply-To: <B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
References: <45516127.4030306@callum-macdonald.com>	<45516DF3.20809@pacific.net.sg>
	<B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
Message-ID: <455863E0.30509@callum-macdonald.com>

Remco, you're right, I'm confusing package naming with release naming.

The release naming documentation states "The vtigercrm project no longer 
produces Patches 
<http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/PatchSubmission> for 
distribution..." but there is a patch available here:
http://www.vtiger.com/index.php?option=com_content&task=view&id=30&Itemid=57

Who releases that patch? It's really the name of the patches that I 
think should be simplified, not the naming of the main releases.

Cheers - Callum.

Dhr. R.R. Gerbrands wrote:
> @ Nicholas,
>
> If you find it odd, you might want to wait using vtigercrm as we're in 
> the process of becoming mature. 
>
> @ Callum,
>
> What you are refering to is not release naming to my idea.
> But package naming.
> I think that's a bit confusing for more people,
> The release naming is still the same, in you example 5.0.2,
> depending on the target platform is you're suggested packet naming.
>
> I can agree with it, yet as our user are no newbee's the naming as 
> stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseNaming
> is enough, I would suggest adding a wiki page for the newbee's who 
> doesn't know what to download instead.
>
> Best regards,
>
> Remco
>
>
>
>
> Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:
>
>> I just found it odd that the naming issue is still being discussed till
>> today. Why isn't the standard set and enforced already?
>>
>> Callum Macdonald wrote:
>>> Hi Guys,
>>>
>>> I think the naming of releases should be simplified. I suggest Joomla 
>>> provides a good template to use (with one or two improvements):
>>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11
>>>
>>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
>>> from what version you can apply patch 2, and so on. I suggest we use 
>>> the 
>>> same method as Joomla. When a new version is released (5.0.2) then the 
>>> following files are released:
>>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>>> vtigercrm-5.0.2-full-windows.exe
>>> vtigercrm-5.0.2-full-linux.bin
>>> vtigercrm-5.0.2-full-lamp.tgz
>>>
>>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
>>> think it's important to include the windows/linux/lamp in the file 
>>> name. 
>>> I know it's obvious from the extension to MOST people, but not to 
>>> everyone.
>>>
>>> I also think these files should all be released in the same package in 
>>> sourceforge. In my opinion, splitting the full and patch releases is 
>>> confusing.
>>>
>>> I think this is a HUGELY important issue, as important as the recent 
>>> heated debate over the naming of the GA release.
>>>
>>> Comments on a postcard...
>>>
>>>
>>> Callum.
>>> _______________________________________________
>>> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>>>
>>>
>>
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
> Dhr. R.R. Gerbrands
>
> Artoge 
>
> ICT Security & Administration
> Jachthoornstraat 59
> 6219 BN  Maastricht
>
> kvk 14083961
> btw 155595106B01
>
> t:    +31 43 325 0316 
> m:  +31 6 2127 8082
> e:   remco at artoge.nl <mailto:remco at artoge.nl>
> i:    www.artoge.nl
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


From remco at artoge.nl  Mon Nov 13 09:33:15 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 13 Nov 2006 18:33:15 +0100
Subject: [Vtigercrm-developers] Release naming (package naming)
In-Reply-To: <455863E0.30509@callum-macdonald.com>
References: <45516127.4030306@callum-macdonald.com>	<45516DF3.20809@pacific.net.sg>
	<B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
	<455863E0.30509@callum-macdonald.com>
Message-ID: <AFD411F9-259C-45D4-AE90-C46863E8ECFB@artoge.nl>

Hi Callum,

I see what you mean:

LAMP/WAMP download (6.1 MB/tar.gz)
v5.0 Patch 2  download  (0.65 MB/tar.gz)

I agree, that's not a propere release naming, reading blog: http:// 
www.vtiger.com/blogs/page/7/  that was handle by Philip and Mickie.
Looking at: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
ReleaseNaming and seeing tar.gz I think they should name this: "LAMP/ 
WAMP update from 5.0.1 to 5.0.2"

Cheers, Remco




Op 13-nov-2006, om 13:24 heeft Callum Macdonald het volgende geschreven:
> Remco, you're right, I'm confusing package naming with release naming.
>
> The release naming documentation states "The vtigercrm project no  
> longer
> produces Patches
> <http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/PatchSubmission> for
> distribution..." but there is a patch available here:
> http://www.vtiger.com/index.php? 
> option=com_content&task=view&id=30&Itemid=57
>
> Who releases that patch? It's really the name of the patches that I
> think should be simplified, not the naming of the main releases.
>
> Cheers - Callum.
>
> Dhr. R.R. Gerbrands wrote:
>> @ Nicholas,
>>
>> If you find it odd, you might want to wait using vtigercrm as  
>> we're in
>> the process of becoming mature.
>>
>> @ Callum,
>>
>> What you are refering to is not release naming to my idea.
>> But package naming.
>> I think that's a bit confusing for more people,
>> The release naming is still the same, in you example 5.0.2,
>> depending on the target platform is you're suggested packet naming.
>>
>> I can agree with it, yet as our user are no newbee's the naming as
>> stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
>> ReleaseNaming
>> is enough, I would suggest adding a wiki page for the newbee's who
>> doesn't know what to download instead.
>>
>> Best regards,
>>
>> Remco
>>
>>
>>
>>
>> Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:
>>
>>> I just found it odd that the naming issue is still being  
>>> discussed till
>>> today. Why isn't the standard set and enforced already?
>>>
>>> Callum Macdonald wrote:
>>>> Hi Guys,
>>>>
>>>> I think the naming of releases should be simplified. I suggest  
>>>> Joomla
>>>> provides a good template to use (with one or two improvements):
>>>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/ 
>>>> frs.joomla_1_0.1_0_11
>>>>
>>>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not  
>>>> clear
>>>> from what version you can apply patch 2, and so on. I suggest we  
>>>> use
>>>> the
>>>> same method as Joomla. When a new version is released (5.0.2)  
>>>> then the
>>>> following files are released:
>>>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>>>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>>>> vtigercrm-5.0.2-full-windows.exe
>>>> vtigercrm-5.0.2-full-linux.bin
>>>> vtigercrm-5.0.2-full-lamp.tgz
>>>>
>>>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0- 
>>>> patch2.zip?download>I
>>>> think it's important to include the windows/linux/lamp in the file
>>>> name.
>>>> I know it's obvious from the extension to MOST people, but not to
>>>> everyone.
>>>>
>>>> I also think these files should all be released in the same  
>>>> package in
>>>> sourceforge. In my opinion, splitting the full and patch  
>>>> releases is
>>>> confusing.
>>>>
>>>> I think this is a HUGELY important issue, as important as the  
>>>> recent
>>>> heated debate over the naming of the GA release.
>>>>
>>>> Comments on a postcard...
>>>>
>>>>
>>>> Callum.
>>>> _______________________________________________
>>>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>
>> Dhr. R.R. Gerbrands
>>
>> Artoge
>>
>> ICT Security & Administration
>> Jachthoornstraat 59
>> 6219 BN  Maastricht
>>
>> kvk 14083961
>> btw 155595106B01
>>
>> t:    +31 43 325 0316
>> m:  +31 6 2127 8082
>> e:   remco at artoge.nl <mailto:remco at artoge.nl>
>> i:    www.artoge.nl
>>
>>
>> --------------------------------------------------------------------- 
>> ---
>>
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061113/a73c5675/attachment.htm

From jamestillman at sevatechnologies.com  Tue Nov 14 06:20:08 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 06:20:08 -0800
Subject: [Vtigercrm-developers] Bug in soap/vtigerolservice.php
Message-ID: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>

The vtiger forums are down, and there is no immediately obvious way to
log bugs for vtiger, so I'm resorting to subscribing to your mailing to
report a bug.
 
Using version 502.
 
On line 754 in soap/vtigerolservice.php, there is this code:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.$account_name."'";

Besides being an invite to a sql-injection attack, this also creates
problems for the Outlook plugin when a contact in Outlook has a company
name with an apostrophe in it, and that contact does not yet exist in
vtiger.  The contact John Smith, with Bob's Pool Hall in the company
name, for example, will create the very unhelpful "Invalid return value
from vtigerCRM" error message when you attempt to sync using the Outlook
plugin.
 
Modifying line 754 to read:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.addslashes($account_name)."'";

while not the best option for a fix, does cause the contact sync to
begin working even with apostrophes in the company name.
 
jpt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/e0d8863f/attachment.html

From jamestillman at sevatechnologies.com  Tue Nov 14 06:44:32 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 06:44:32 -0800
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
Message-ID: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>

((If someone would fix the forums registration, I'll gladly start
posting these issues on the forums if this is not the correct venue.
Until then, I assume reporting in some way is better than not reporting
at all.))
 
modules/Emails/Emails.php seems to be lacking some key class-level
fields.  Namely, these:
 
var $rel_users_table = "vtiger_salesmanactivityrel";
var $rel_contacts_table = "vtiger_cntactivityrel";
var $rel_serel_table = "vtiger_seactivityrel";

It makes use of these fields in its code, as in the function
set_emails_contact_invitee_relationship(), but they are not set anywhere
in the class.
 
This problem comes to light when you attempt to use the Outlook plugin
to link emails to a vtiger contact.  You get the typical "Invalid return
value from vtigerCRM" error message.
 
I inserted the lines mentioned above at line 38 in Emails.php and
Outlook email linking started to work.
 
Most of the Outlook interaction with vtiger in v502 seems to be sadly
broken out of the box.
 
By the way, anyone thought of improving the Outlook plugin to do
something other than stupidly report that vtiger returned an invalid
response?  Having to use Fiddler or some other HTTP inspection utility
to just to find the PHP error message from vtiger is time-consuming.
 
jpt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/ae70ce49/attachment.htm

From remco at artoge.nl  Tue Nov 14 06:58:53 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 15:58:53 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
Message-ID: <86206992-3704-444F-8FB0-96CF3A4437FB@artoge.nl>

James,

Even the forums, aren't the place to report a bug, instead that  
should be done within Track

First see: community tab.
Gives http://www.vtiger.com/index.php? 
option=com_content&task=view&id=86&Itemid=133

Then bug tracker, you will need a track login.
Gopal is your man to provide you with a login, ask him:  
gopals at vtiger.com

Thanks for reporting any issues,

Best regards, Remco



Op 14-nov-2006, om 15:44 heeft James Tillman het volgende geschreven:

> ((If someone would fix the forums registration, I'll gladly start  
> posting these issues on the forums if this is not the correct  
> venue.  Until then, I assume reporting in some way is better than  
> not reporting at all.))
>
> modules/Emails/Emails.php seems to be lacking some key class-level  
> fields.  Namely, these:
>
> var $rel_users_table = "vtiger_salesmanactivityrel";
> var $rel_contacts_table = "vtiger_cntactivityrel";
> var $rel_serel_table = "vtiger_seactivityrel";
> It makes use of these fields in its code, as in the function  
> set_emails_contact_invitee_relationship(), but they are not set  
> anywhere in the class.
>
> This problem comes to light when you attempt to use the Outlook  
> plugin to link emails to a vtiger contact.  You get the typical  
> "Invalid return value from vtigerCRM" error message.
>
> I inserted the lines mentioned above at line 38 in Emails.php and  
> Outlook email linking started to work.
>
> Most of the Outlook interaction with vtiger in v502 seems to be  
> sadly broken out of the box.
>
> By the way, anyone thought of improving the Outlook plugin to do  
> something other than stupidly report that vtiger returned an  
> invalid response?  Having to use Fiddler or some other HTTP  
> inspection utility to just to find the PHP error message from  
> vtiger is time-consuming.
>
> jpt
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/564d4cad/attachment.html

From jamestillman at sevatechnologies.com  Tue Nov 14 07:25:50 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 07:25:50 -0800
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <86206992-3704-444F-8FB0-96CF3A4437FB@artoge.nl>
Message-ID: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>

Thanks, Remco.  I had assumed that the bug tracker was the way to go,
but saw no way to sign up for vTiger's Trac.
 
I clicked on "Bug Tracker" in the Community section and got this page:
 
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report
 
which has no information on signing up.  Clicking "vTiger Trac" in the
community section is also a dead end for bug reporters, it seems.
 
Did I miss something obvious?
 
By the way, is there any way to search by keyword in Trac?  Not easy to
determine if a bug exists if you have to scan the whole bug database.
 
jpt


________________________________

	From: vtigercrm-developers-bounces at lists.vtigercrm.com
[mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf Of
Dhr. R.R. Gerbrands
	Sent: Tuesday, November 14, 2006 9:59 AM
	To: vtigercrm-developers at lists.vtigercrm.com
	Subject: Re: [Vtigercrm-developers] A bug in
modules/Emails/Emails.php
	
	
	James, 

	Even the forums, aren't the place to report a bug, instead that
should be done within Track

	First see: community tab.
	Gives
http://www.vtiger.com/index.php?option=com_content&task=view&id=86&Itemi
d=133

	Then bug tracker, you will need a track login.
	Gopal is your man to provide you with a login, ask him:
gopals at vtiger.com

	Thanks for reporting any issues,

	Best regards, Remco



	Op 14-nov-2006, om 15:44 heeft James Tillman het volgende
geschreven:


		((If someone would fix the forums registration, I'll
gladly start posting these issues on the forums if this is not the
correct venue.  Until then, I assume reporting in some way is better
than not reporting at all.))
		 
		modules/Emails/Emails.php seems to be lacking some key
class-level fields.  Namely, these:
		 
		var $rel_users_table = "vtiger_salesmanactivityrel";
		var $rel_contacts_table = "vtiger_cntactivityrel";
		var $rel_serel_table = "vtiger_seactivityrel";
		
		It makes use of these fields in its code, as in the
function set_emails_contact_invitee_relationship(), but they are not set
anywhere in the class.
		 
		This problem comes to light when you attempt to use the
Outlook plugin to link emails to a vtiger contact.  You get the typical
"Invalid return value from vtigerCRM" error message.
		 
		I inserted the lines mentioned above at line 38 in
Emails.php and Outlook email linking started to work.
		 
		Most of the Outlook interaction with vtiger in v502
seems to be sadly broken out of the box.
		 
		By the way, anyone thought of improving the Outlook
plugin to do something other than stupidly report that vtiger returned
an invalid response?  Having to use Fiddler or some other HTTP
inspection utility to just to find the PHP error message from vtiger is
time-consuming.
		 
		jpt
		
		_______________________________________________
		Reach hundreds of potential candidates -
http://jobs.vtiger.com 


	
	Dhr. R.R. Gerbrands

	Artoge 

	ICT Security & Administration
	Jachthoornstraat 59
	6219 BN  Maastricht

	kvk 14083961
	btw 155595106B01

	t:    +31 43 325 0316 
	m:  +31 6 2127 8082
	e:   remco at artoge.nl
	i:    www.artoge.nl



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/79c869d9/attachment.htm

From remco at artoge.nl  Tue Nov 14 08:33:25 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 17:33:25 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
Message-ID: <6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>

Hi James,

No, you didn't miss something. Your right, it's not easy to see how  
to report a bug, theseday's something more to-do, if I only had the  
time :-(


Yes you can search within track:
1) on the upper right use: Custom Query
After clicking it:
2) use [Add filter] and
3) select a filter option (includes also Keywords)

Best Regards,

Remco



Op 14-nov-2006, om 16:25 heeft James Tillman het volgende geschreven:

> Thanks, Remco.  I had assumed that the bug tracker was the way to  
> go, but saw no way to sign up for vTiger's Trac.
>
> I clicked on "Bug Tracker" in the Community section and got this page:
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report
>
> which has no information on signing up.  Clicking "vTiger Trac" in  
> the community section is also a dead end for bug reporters, it seems.
>
> Did I miss something obvious?
>
> By the way, is there any way to search by keyword in Trac?  Not  
> easy to determine if a bug exists if you have to scan the whole bug  
> database.
>
> jpt
>
> From: vtigercrm-developers-bounces at lists.vtigercrm.com  
> [mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf  
> Of Dhr. R.R. Gerbrands
> Sent: Tuesday, November 14, 2006 9:59 AM
> To: vtigercrm-developers at lists.vtigercrm.com
> Subject: Re: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
>
> James,
>
> Even the forums, aren't the place to report a bug, instead that  
> should be done within Track
>
> First see: community tab.
> Gives http://www.vtiger.com/index.php? 
> option=com_content&task=view&id=86&Itemid=133
>
> Then bug tracker, you will need a track login.
> Gopal is your man to provide you with a login, ask him:  
> gopals at vtiger.com
>
> Thanks for reporting any issues,
>
> Best regards, Remco
>
>
>
> Op 14-nov-2006, om 15:44 heeft James Tillman het volgende geschreven:
>
>> ((If someone would fix the forums registration, I'll gladly start  
>> posting these issues on the forums if this is not the correct  
>> venue.  Until then, I assume reporting in some way is better than  
>> not reporting at all.))
>>
>> modules/Emails/Emails.php seems to be lacking some key class-level  
>> fields.  Namely, these:
>>
>> var $rel_users_table = "vtiger_salesmanactivityrel";
>> var $rel_contacts_table = "vtiger_cntactivityrel";
>> var $rel_serel_table = "vtiger_seactivityrel";
>> It makes use of these fields in its code, as in the function  
>> set_emails_contact_invitee_relationship(), but they are not set  
>> anywhere in the class.
>>
>> This problem comes to light when you attempt to use the Outlook  
>> plugin to link emails to a vtiger contact.  You get the typical  
>> "Invalid return value from vtigerCRM" error message.
>>
>> I inserted the lines mentioned above at line 38 in Emails.php and  
>> Outlook email linking started to work.
>>
>> Most of the Outlook interaction with vtiger in v502 seems to be  
>> sadly broken out of the box.
>>
>> By the way, anyone thought of improving the Outlook plugin to do  
>> something other than stupidly report that vtiger returned an  
>> invalid response?  Having to use Fiddler or some other HTTP  
>> inspection utility to just to find the PHP error message from  
>> vtiger is time-consuming.
>>
>> jpt
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/ef6bad09/attachment.html

From jtk at yahoo.com  Tue Nov 14 10:49:47 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Tue, 14 Nov 2006 13:49:47 -0500
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
Message-ID: <pan.2006.11.14.18.49.47.164625@yahoo.com>

Dhr. R.R. Gerbrands wrote:
> Your right, it's not easy to see how to report a bug, theseday's
> something more to-do, if I only had the time :-(

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart

now links to

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets

which links to

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess


From joestewart at users.sourceforge.net  Tue Nov 14 11:09:57 2006
From: joestewart at users.sourceforge.net (Joe Stewart)
Date: Tue, 14 Nov 2006 13:09:57 -0600
Subject: [Vtigercrm-developers] trac Account Manager Plugin
In-Reply-To: <pan.2006.11.14.18.49.47.164625@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
Message-ID: <455A1485.3090109@users.sourceforge.net>

on 11/14/2006 12:49 PM Jeff Kowalczyk said the following:
> Dhr. R.R. Gerbrands wrote:
>   
>> Your right, it's not easy to see how to report a bug, theseday's
>> something more to-do, if I only had the time :-(
>>     
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart
>
> now links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets
>
> which links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess
>
>   

Just a side note.  There is now an Account Manager Plugin for trac that 
allows users to register for an account:

http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin

Joe

From remco at artoge.nl  Tue Nov 14 11:26:49 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 20:26:49 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <pan.2006.11.14.18.49.47.164625@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
Message-ID: <314E9A1B-3A8C-4EE8-8B59-E2749627A2D8@artoge.nl>

Thanks, Jeff :-)

remco

Op 14-nov-2006, om 19:49 heeft Jeff Kowalczyk het volgende geschreven:

> Dhr. R.R. Gerbrands wrote:
>> Your right, it's not easy to see how to report a bug, theseday's
>> something more to-do, if I only had the time :-(
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart
>
> now links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets
>
> which links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/e739431f/attachment.htm

From jtk at yahoo.com  Tue Nov 14 12:38:16 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Tue, 14 Nov 2006 15:38:16 -0500
Subject: [Vtigercrm-developers] trac Account Manager Plugin
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
	<455A1485.3090109@users.sourceforge.net>
Message-ID: <pan.2006.11.14.20.38.15.301337@yahoo.com>

Joe Stewart wrote:
> Just a side note.  There is now an Account Manager Plugin for trac that
> allows users to register for an account:
> 
> http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin

That, and the WebAdmin plugin, which will eventually be part of Trac core:
http://trac.edgewall.org/wiki/WebAdmin

Trac is currently at release trac-0.10.2, BTW. We're running trac.0.9.5.


From jeri at vtiger.com  Tue Nov 14 22:28:51 2006
From: jeri at vtiger.com (Jeri John)
Date: Wed, 15 Nov 2006 11:58:51 +0530
Subject: [Vtigercrm-developers] Bug in soap/vtigerolservice.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
Message-ID: <10eea4db828.-8020503555403603074.-7158338222294584874@@vtiger.com>


Dear James,
              Thanks for your fix.We have integrated this and checked in to SVN.
The revision is 9840.

Thanks & Regards,
Jerry.


---- On Tue, 14 Nov 2006 James Tillman <jamestillman at sevatechnologies.com> wrote ---- 

The vtiger forums are down, and there is no immediately obvious way to log bugs for vtiger, so I'm resorting to subscribing to your mailing to report a bug.
 
Using version 502.
 
On line 754 in soap/vtigerolservice.php, there is this code:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.$account_name."'";

Besides being an invite to a sql-injection attack, this also creates problems for the Outlook plugin when a contact in Outlook has a company name with an apostrophe in it, and that contact does not yet exist in vtiger.  The contact John Smith, with Bob's Pool Hall in the company name, for example, will create the very unhelpful "Invalid return value from vtigerCRM" error message when you attempt to sync using the Outlook plugin.
 
Modifying line 754 to read:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.addslashes($account_name)."'";

while not the best option for a fix, does cause the contact sync to begin working even with apostrophes in the company name.
 
jpt

_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061115/32ed6281/attachment.html

From fboudra at gmail.com  Wed Nov 15 02:14:40 2006
From: fboudra at gmail.com (Fathi Boudra)
Date: Wed, 15 Nov 2006 11:14:40 +0100
Subject: [Vtigercrm-developers] trac Account Manager Plugin
In-Reply-To: <pan.2006.11.14.20.38.15.301337@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<455A1485.3090109@users.sourceforge.net>
	<pan.2006.11.14.20.38.15.301337@yahoo.com>
Message-ID: <200611151114.40395.fboudra@gmail.com>

Le mardi 14 novembre 2006 21:38, Jeff Kowalczyk a ?crit :
> Joe Stewart wrote:
> > Just a side note.  There is now an Account Manager Plugin for trac that
> > allows users to register for an account:
> >
> > http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin
>
> That, and the WebAdmin plugin, which will eventually be part of Trac core:
> http://trac.edgewall.org/wiki/WebAdmin

Web admin plugin is already installed. are you interested by adding 
AccountManagerPlugin if it isn't a duplication of webadmin in terms of 
functionnality ?

> Trac is currently at release trac-0.10.2, BTW. We're running trac.0.9.5.

in TODO list concerning infrastructure:
* update gforge
* update trac

just, i lack of time atm. We'll do asap.

cheers,

Fathi


From jens at Strawberry.COM  Wed Nov 15 03:40:42 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Wed, 15 Nov 2006 12:40:42 +0100
Subject: [Vtigercrm-developers] [FEATURE REQUEST] Support Multiple
	SalesOffices
In-Reply-To: <20060825232016.F13092@Strawberry.COM>;
	from Jens Hamisch on Fri, Aug 25, 2006 at 11:20:17PM +0200
References: <3E26E7A199CABA49822B3E6B741434F97D0914@exch.accuratetechnologies.com>
	<20060817165659.B21264@Strawberry.COM>
	<20060818091439.U2464@Strawberry.COM>
	<20060825232016.F13092@Strawberry.COM>
Message-ID: <20061115124042.D4158@Strawberry.COM>



Hi Dennis,
hi *,


it took a while to check everything out and finally to upload
my changes to the SVN, but now I finally managed to do it.
The feature branch 5.1_jens now contains a copy of 5.0.2 plus
the following changes:

    FCR 2035 - Multi Organization and Organization Units support
    Postgres 8.1 support (5.0.2 does not contain all required
	patches)
    FormLetter support (Campaign reports may utilize the contacts
	as secondry table to generate a list of addresses to be
	used as form letter database in openoffice/staroffice/etc)
    Some bugfixes regarding vtiger 5.0.2 
    Account-Contacts filter on SalesOrder-, PurchaseOrder-, Quote-
	and Invoice-Popups): If an account is specified, the popup
	shows only tho contacts related to that account. May be over-
	ridden in the popup).

This version is based on vtiger 5.0.2.
It is almost a snapshot of my working vtiger copy.
It runs stable in the following environment:

    Solaris 10 (Sparc 64 bit)
    Apache 2.2.2
    PHP 5.1.4
    Postgres 8.1.2 (with perl 5.8.7 backend)

It is currently available on SVN only

    svn checkout http://vtiger.fosslabs.com/svn/vtiger/vtigercrm/branches/5.1_jens


The branch also consists of a SQL-Script to migrate an existing database
from 5.0.2 to 5.1_jens:  schema/502To51Jens.sql
This script offers the opportunity to use 5.1_jens on an existing database.
However, I strongly advise to produce and save a backup before doing so.

You may also start on an empty database using the usual installation
prodcedure.

If you start from scratch and populate the database with your entities
(e.g. using a SQL dump from your productive database), you'll have to
adjust the organization assignment before using the database as follows:

    INSERT INTO vtiger_entity2org
	SELECT 'vtiger', crmid, '1' FROM vtiger_crmentity;

Replace 'vtiger' by your organizationname in this case.


I'd appreciate any comments on my addons.

Kind regards,
Jens




On Fri, Aug 25, 2006 at 11:20:17PM +0200, Jens Hamisch wrote:
> Hi Dennis,
> hi *,
> 
> I've opened a feature change request in trac on this: #2035.
> Attached please find a proposal describing the required database
> and GUI changes.
> 
> I'm on vacation for the next 2 weeks, so IMHO I could start
> working on this enhancement based on the GA aftar my return.
> 
> 
> Kind regards
> Jens
> 
> 
> 
> On Fri, Aug 18, 2006 at 09:14:39AM +0200, Jens Hamisch wrote:
> > 
> > Hi Dennis,
> > hi *,
> > 
> > 
> > I'd like to post a proposal for an implementation of this feature.
> > In advance there's one item unclear to me:
> > 
> >     What is the "official" procedure to add items to the
> >     vtiger_tab and vtiger_field tables?
> > 
> > As I'd  suggest the introduction of new tables, there should be a
> > new table identifier on those. I'd like to ensure not to get into
> > conflict with other addons and the ongoing process from RC to GA.
> > So how do I "reserve" unique table ids? And is there a space for
> > private tables (if someone adds private stuff)?
> > 
> > 
> > Jens
> > On Thu, Aug 17, 2006 at 04:56:59PM +0200, Jens Hamisch wrote:
> > > Hi,
> > > 
> > > > I also agree that there may be a default sales office for
> > > > sub-organizations, but I don't thing that sub-organizations is a
> > > > prerequisite for having multiple sales offices.
> > > 
> > > yes ...
> > > 
> > > The problem I have, that I need support for more than one entire
> > > organization. So my point of introducing organizational units was
> > > to split this off the organization table. The wording doesn't matter
> > > at a first glance. A 'sales office' or 'location' would just be
> > > some abstract part of an organization.
> > > 
> > > > Jens, are you going to work on this?
> > > 
> > > Yeah.
> > > 
> > > > I'm going to be offline for a week (military exercise) so I won't be
> > > > able to work on it for a little bit.
> > > 
> > > Have fun!
> > > I hope to able to present something to you ehen you'll be online again.
> > > 
> > > -- Jens
> > > 
> > > --------------------------------------------------------------------------------
> > >      /
> > >  +##+|##+   STRAWBERRY                     Jens Hamisch
> > > +v#+v v##+  EDV-Systeme GmbH               Managing director
> > > / v    v\v
> > > | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> > > |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
> > >  | .     |                                 Fax:          (+49 8171) 41805-59
> > >  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
> > >   \____/    Strawberry at Strawberry.COM      
> > > 
> > > _______________________________________________
> > > Get started with creating presentations online - http://zohoshow.com?vt 
> > 
> > -- 
> > 
> > --------------------------------------------------------------------------------
> >      /
> >  +##+|##+   STRAWBERRY                     Jens Hamisch
> > +v#+v v##+  EDV-Systeme GmbH               Managing director
> > / v    v\v
> > | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> > |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
> >  | .     |                                 Fax:          (+49 8171) 41805-59
> >  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
> >   \____/    Strawberry at Strawberry.COM      
> > 
> > _______________________________________________
> > Get started with creating presentations online - http://zohoshow.com?vt 
> 
> -- 
> 
> --------------------------------------------------------------------------------
>      /
>  +##+|##+   STRAWBERRY                     Jens Hamisch
> +v#+v v##+  EDV-Systeme GmbH               Managing director
> / v    v\v
> | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
>  | .     |                                 Fax:          (+49 8171) 41805-59
>  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
>   \____/    Strawberry at Strawberry.COM      
> 

> %PDF-1.4
> %????
> 1 0 obj
> << /Length 2 0 R
>    /Filter /FlateDecode
> >>
> stream
> x??Y??\'?_i???\L??#E?v??^?]?/??U5S?????g&?V???V????m??H????_B
> y?"Zu??m??U??F?Y~??O???=???ya%`^~??WB)??Q??J?????wJ
~|+???I_?7?)??<?O??<O?f?<N?f
??v
> U?|$?*??|???*???gX???????'????BSb??k?a????/+?mO???u?????
?x??(
?
???????B??0?W\??g?
1J
?h?T?iH?gZ?g???5y?,1d?o???"?dP???????eR5+?*1W~????3?C?X?Y?\S?G??lWft??$}k????L????M?${?
??9?????6P?
?
?WK???Z{?6???F
??
??pC?E
K?y
t???}|C~???C?`1F?S?QF?A?? ???r?56?L???F?
> ?_A?m`D?
???v|?u|P????_???F0??Kl\??8F?o??zV;k??$?(?m_?qC*??????)
XJ??)??@?=?$?????????5?y?M?w?pWv
?/|?Jy???[???$??W?O??#%??x?):??eU?????T??H0?Zxx??JKOu???C?mJ"???????H???`X}11?.E??g??X??w ?
???j???Y??"!?Tkh?.???	FVNxV:?uge??ov*]?'?L)JR???P???????Y?d
???pX??l??s???oB=Pf?RV4&??d
??[JH??K@????X?u?)????y????K?S????9??
??j?
\?F`s
8?46&
??S???????2?Ru???Ba/#???F11b???{?????!2<?s????n????????iP
??d????
z6=0)??z?xdW?[.Il??b???iu????????O???#?<??M?|
N??r???\???9H???????T?????????d3?]??U
?-????+??2I?<???.?u?5??-j??????Z?I@?|?~M????Z$?"??&S??a=?q,?Zc???R0?\j?e????_]??ia??-??|?CQ?>?wR??????J?/?BB}???phOe?????<3?R??????^?*Fn? ?`??I?4??X???)U?5?un>??1?cY
b???,?D>??	?????`=B/U??o??1/?d<}?5???T3?w^??
?n2c?-???x?;?
|0y=
o???zt?wC?
?????_>?kx?Mcl?y??
Y&3_???:????i?????9???I(j??1?????o
?Mo?e???t?2??ve?G??{?l-?Du????r?????HS
LJ?h?sF??&S+????P?F5CK?:?;???8nT-4???6?WP??z?X?????9mh8??s????
V?J?}??5????P?w?=%??7{J??T???????.=^%J??'??????I[??(?>wIR?p
> ?r?W:J[??5?
??<v&??P
3Y???:???????E&??l?+Q???????TFK?9f?6k??L?s??*???w????l??cT?????/1???Do???f?r1?
?W?B?K????????no??
1??;?9[ZFv??^???2*?9?e??U?-??*?2QV???g??J?&????lb????}??????.?_}
{?>????????8??T????????x??
endstream
> endobj
> 
> 2 0 obj
>   1713
> endobj
> 
> 4 0 obj
> << /Length 5 0 R
>    /Filter /FlateDecode
>    /Length1 9796
> >>
> stream
> x??z{|T???Z{???={?{&?d?0&<?0I?0	?C#??@F'O????p?"	???9
j-z????p?`??z?h=???U???Xs????:???=CDk?????????;?^?z?{/?????E;A???5mO?
>??)B?X??KJ????_????a??
??!r!??aSO??A?&??/!d???PSo?~?U?2v?s??A??X
?SP??is??;?T?
?;P???????P=??&?/?\s???
????fs????!??????????f???????u4??????m1oB??>Z at yZg??
> ?J?????h0?????Hs?gd?$??????O??u#?7???d???_~??????e
> ????.?J???2?
?i??h???h???|??[
o?h??<????d1z?@???It
???:?6t?`z?=t<f?S?	u1G?
Z?j?m??^F????ss
> f???r}?rfzgL?65;?6?????Hw?9?6??l2DA??j?*???X?`4???*?9^?????I???Z??,?Sw?2???I?_?g|??9Y?3???2???t?c???2??9??.??vJM*?o??6?
???a???#J????)???4?E?E
?????Z?0?v?-?2????;? ?.gf???1Y?Zb??0 ???????95q~??]???LI??E1
???
????tl???=?DT?j?=?5?????"Y?Mk(K)?????'?H?M??????)_?b??????ZT9?>???,???%0b????d???,?????{???[{??[UUe?K=? ,V?RG??rf&??b@}?
??RC?,m??dZ??4?CK?@05??Q?????????????b?5r??????[\?jJ
?
V?	/?r'??|U?"J??f?3)???p?JovJ??;`??T'???J?K?
s?`?\Yy?Uf?9+?e?
i??(???????R?j????#??y????e
?l0<XsjbG?G=???/l+
????0????!g?lOUL7?y?{?
e?*??nC??j??*?????
.??
????T?%`???*'????kO?T?@q???Sl?<j?;??E)????9t*?j??qwe?.?Z?q?yA
a?s?f?e-??q?grz???(?TKL?=?'?VSi?????
???iQ%q2UI?q???`?E1??i?A??????q???EU?h@??????u?R???$[?'E?Z? ?(???6d?C??;8?gZ"@ ??&??z??zdj??
> '"*?????}??x</??7???3????q?????=`????X_?u??N??gf?
AZ3?)&?!v:Q}P#f
> B?Z,

?
?W?1??-?cd?a??1??H??-kI???F?f??K	???????????*?????7?#>???????m?????L??.?m??-Y??l???{??{ql?3?c/???????G?k????~i??m???~??=o`?z?b???4K???p#?
t?QA????J?	!?QP??~?3?
?M@]???8*.*.??J??2??o?Z
?l?A
%l??????DEC??3d?{??o??e?{{????g`??u?"??AW?bzZ?E???????N??q6???w?8?=??e?r?J<5?YP?? ?JO??";?6????9`
> ?
??dE
????!:??MA?
z?F???0DE??g~/??L?8??
??2???
??x:??;???|?!????n?zQ?\)
7?
> 
	y??Y^}D???(?????=?J?b?P?X?V
?TbkV~7P???2???
~zC?????????U;J.?Y4w??????U-?V?X??%???????a??~?????jP~0??'?{??Z??J?(???2't*?W?C?,?D??J?HV??????l???_|r?21?.1??S\w? ?r`?:YRq#/?/O[??1m{?Pgry\?L?HX!T,??#?3?b?ff???????L?x???S??L??t??)???9.??]?=?`,:
S?w?????wDV?Q????)????????o?(?T???e???B!l0????????@?`6(]
?u&C
> ?r???\??e?O??tE?;"???
???????\??
V?1?
fz????:-?z]o?????????J?N???	6????-\
> \?
?'GP&?,?bq????R?_?W8?Q?2"V?Q???K?E,?Z??o?b?~?12?????F??4????v??
@@q?x!???	??
6qQQ^.?S&-??????e?v??H??U?
?-8qb??h???????{+??'??z?gvI????={??????;??\?A}VpN?

t?????`?Q+?^?JE?(H?U???!!(0BR?)e????S??&?G???93???'8???????3nOD?h?Zz'??t?????,?l
 j?zCm??]Pg?t*?1	#*q
???d/5?5??=?n?3F??6????C???P	?? [c^n??B??N????wG?51??O???
???????o??????jg??*??k???~?????L?e?Y+??VT???~????7?6'-Jv{?b1??/G?J&??"??????[r??????	0??C?O???6l_?4??????9?????r?p??4???6c??.?N?L?????6#?4????z?H????d23I
????K??:S?
??d?<^?U???O???m?G?1??jN????C???H+?%?5??}\?9?b>?.?????B?B_?12?????H?????????????c*??R?????}?G_???H??j%?	?<?^???{????-?$q??_={v[?????_~?s?#???v??????????m55???4??k??M?Pv???~?3?a"!??|??p??p?6??{?q!?????I?=?#???G	?%?PmUN?@|??e??`?z???0?C+??????1??BX30?0&v,?bR
???"???r??|! '?3R???0?E.?(?O??z?P|?8??????/g?y?r
? {
?????sq?8?Z?-Sp^?%???0o?
#?	?6?(????u??? b?U
U??:????'??????x?@Va?Aa1???`6?(??????|?xU?9???kW7????I?G????
??s?>?c?C?????VO?
&?
??w?9?p?+?1???:S???(???,\)??[ko?r??t???1=???@I/?8jI?P?P>?8N?'D?9?Jnds?
?+??j??UIJ??
> ?t?{?z??u?3??,???"?yB?{c8??y?z?G????~t??
l?z???????c?5D?$????v?mh~p?xl^s??R*,?T?*U#iV)-+???C?8??'?????Dh<?|?L	D????d1#?????,??????????!??z?
> ?s?#\?x
??hL\?w#
?y?h??%~v?????????>??{?5??????m?:#p]5??????????2?	*p?G?9?-

?A??k?z??
m?????;I???jzj?????.????{
?By?=l-s5?6?m?n?2?7?i??f?l?b??F???h?
??Z7?<?jsd0?|2?%?u?M?8_T??E6l?e?

?u???? ???`zTB?(??????????C??O:#?

> !?Cv%?0ZvJ~??XT?e???x?T7x
?NY??????l<?K}!w???????g??X??o????j??\???o~]}??+?bYS??+74?TwC??????????u??-?
> s????SK??O????s??????7??-	??di???s??Kn?M?g?.?*P ???	\?x3X	3??,0<?CA
?c>?M?1>???m?-^b????_?
?*?G??????
d???
> dA??fn??j???????j????M?	6ee
??2??x???r
??2)H?f1?+?'????????N?b{????????%???a
TE??`+&??n?_????m???g?#H4???a?lLk
u?%/9???,?XP??dwE?F???v????7?5??????;~=td`??????o_}%?'????;x???=?3z?RW?E??j??????0?).T6)YV?R5??`???1????P??}
> dV(?/y?
> bCx
?
?T?$
B,Ks???!????vSN??r!
\*?
???!n?
'?T?e?_=!?*???????Q| Q????<P??????S?Ieb
?????:?`%FaT%"???3h?Cy?y|2???&	??
??
8?m?????db?O7???Mk?y??e3??F?
f??
> ???m????^9K]?
?/??)A?J?D?D?B??	B??????x?!??A?F^&BD??Z???c.???e?(e??k?g?,<??Om{??Om?l?<????3??&??N???Y?0?????????s
> ??At\?n???~?0z?(L1?????Uf?
?7^?1B???C????I?*N??P273?z?=?d?"='??:?n??V?<?D????G:!g???"????M?);??N????>'u?I?r?'U????'?<??3'
?V??~??G
> =?????9???6W?????Jx/a^2?.?Y?Y?/?y??_?s??%o??	vp?????B at uj???R@??????0~?`2&d?Vaw:3??F?Z??
#>@??,acI??	?j???A?eOz????%?Y?B??J?~??K+??????????ujA?{???#=?<???/?~?z?????????fY?=?my??j5?~I???ucz?7?j?]4
??u/?????sU??a?F?4?C??8?3 ?????A?&??+??6?Q????4+??x???t????+???H?YqQ?H???[???-
???????Yx??iW<xb'??s?q????????q0??K?????j??J?R?b?]h??&
?B?C0?T?458???^?{Q??U*H<??*
a#?? )??
,	5?"?(|6???CrK
??U??P)??b?????????_?G??c??k?~<z-?^??p4???c???
?,q??_N\JF??K??=8????'2[5[??%
kd%T????ZD??E??Y8?vUj8??W)?<
?g??0???
> 
1?h?j???
> V?h??"\???*??!?!??
?W??,?X????O P???2??9???C
????7?s???:s?Z?kr???$_?&???&.&Z
> ?$n?O4^??G????L_??
??????A?P?
??????X?#HfA??#`?$???Y?1???	??1?????rp???
> ?????7???"?z?? ??$?M??????@n??k$c??c?3o??$?#????c?	E?G??oe?????7X??v)?+'B?????
Ekb?-?Ea?????&f?????F??a
> !??
?????_@???I?
J?b???(??GQ5???0?
> dc???\?f???gFQ??@???v
k#K????'?cA????_p??e??^???&??	????>???{?a~!?????X?Q?@qU9MY???JS?R???)=h
?l? "??Q@
???F{E??I^????8???
?S8A.???????p????p
??!
+???;?*X????1?37R8??D??	ZH?R8???2
sh6iK?<?????N-n???????^??????Z?z:?74uIk????[Z?z??E?
m?
5]??[?????
???n??I?GwJ

?

[?gIK??uu???CRs?T#uu??7l???(?6??U???\?$m???j`?
??]

@U??????????????::?s??6??5?6to???\8G??WJu??V???I?????W??y???hs?(:h????????m???P=?j?^X
jEm?u?????Ze?+?o@???-???
8???+???
> ??C9)??????&x?[???k
P6@?U???\#?cW??[????????.y?z????ZQ??????p?&??j=P??3(e?]?d???j?g??-?g?z????	c?j7??????i(}k?*y?n??g?K?s??????f??q2?????zrSk?L?6??I???\??Jt
??Kh??????|???w\???)~?????w????????{??B?"????m?????w?%??x?N?N2???}????a<2Z??????%?|W???H??{?]???{????|W???|W?7?%??z????^?y?5?[???Vg?5??????YO)Q?????jK??jsnjul?bun?????b????fKzc?????hh2;?????X???q?}?{
?v?D
?z
"?OT+]?????}???G??
0P?t?D
???
??Q?j
?C???j??
> ??
???JW =|*?
?}??R`1??~?6?????????Y??9??~?t!{???,a?G/?
L??????;?t?Mg4?u?h?juz-??C?L^????B??u?W??yJ)T??\????c??h????	C??$??.????{???????0~?
> Zc?C??c:?@a\?n}?)?????O???????TYU????/_]k????S???*H???{Q?H?I=?4?Z???6%??1=@?????/Gt????????n????Q
> endstream
> endobj
> 
> 5 0 obj
> 6721
> endobj
> 
> 6 0 obj
> << /Type /FontDescriptor
>    /FontName /CAAAAA+GillSansMT
>    /Flags 4
>    /FontBBox [ -161 -229 1040 916 ]
>    /ItalicAngle 0
>    /Ascent 929
>    /Descent -230
>    /CapHeight 916
>    /StemV 80
>    /FontFile2 4 0 R
> >>
> endobj
> 
> 7 0 obj
> << /Length 383
>    /Filter /FlateDecode >>
> stream
> x?]??n?0E?H??????)BJ?F????LR?? ?,??
{iUu:??x?=?f????W??o?Bzul\???^}%? ??
?6?n?????e??_?.???????*?????K?oj?????a????wR??M????u_r??8?\?r
k>??sy!?~_M?????:Q???Um-??????$a???\?v?<???w??Y?c?Y?1Z?q??? ??# ?0????`??
??$,
k?=X`H[??<r??w;??	hG?'??IQ@??}2???
h??0??}Rt?'?M>}4}2
:??4}??M?]?X0??h???.????8?3F?w?????a?18??4N~??k;?M?oP??endstream
> endobj
> 
> 8 0 obj
> << /Type /Font
>    /Subtype /TrueType
>    /BaseFont /CAAAAA+GillSansMT
>    /FirstChar 0
>    /LastChar 34
>    /Widths [ 1000 250 479 500 384 277 729 426
>      770 219 437 500 500 280 500 500
>      500 500 823 395 426 416 333 551
>      666 509 219 323 500 323 458 250
>      500 719 437 ]
>    /FontDescriptor 6 0 R
>    /ToUnicode 7 0 R
> >>
> endobj
> 
> 9 0 obj
> << /Length 10 0 R
>    /Filter /FlateDecode
>    /Length1 9292
> >>
> stream
> x??:{|?U??~?$????N??|i(CI???j5?/???R?E?I???<Z??K?L????*?:??
?t??@??3?"??:+???(?3B???_Buw~???????{????9?:???H?6"VE??}w???_!?

?w????A??x??m????\0!D?!??|???9ew?!?L d??
?4
> g6+r??

???h?@?
hOm^?y??VM?C{?????????D(#???"w??k?e??mqudUt?R???1?m?
?1???kok??=?????A??
?0|?G(G????B?JSk?:^??&??j??;22?8EW???a?R???F?g??]?/M???@????^????5?????#4??yY?/??>?~?????i???a??????????~'??V???K???_
??y?
????F???8
E?VlD?P?P?????
> f?}?y???3<WN?"gZ?Tw?KtN??p??mV??d4?^????TJ?24
?????
?+<??U??j?_?N?????2\6???E_kg~?=e?}C????r??!T?N??@?l\'?U4??+b	{Yc8+????????"E???:??]M?????
Us???k??P?W
??R?;#a?$??
> -??@w9?#?/G?'?m???e?0c?	?,???c?`$??C3??o
P}??it7F???"@?!DgW4?9V7?	6????b?????9??
V}k?t??j?\?
	?	?'q
????????I???OL??????.R???????
> 7l?U??+6o??$O)
4?[??-BgE????i?*? O?h?D??????FwEc??4?{Y"X#W?fI?? ???.???#?<.?s%
=???????;?j??	?z?????H(?
6H?
bU??a?lRDg????????0???rU???b??(?????.???z?l?sD?Jwe????-V???#???????4~[EN??
U?G
???u	!???????
8\??K??KM&????
)????
> ??jj]"???:????5?'kbH`??A?)?EgO??,
?\?:???
??7?&?"?w<??^?#LF?]1?LF6^?\
v?)??0jN(?M????X?|U[???hr<a,??
T]?
4??<p?KV?Wx?A	/??'??
s????
<??"????????V??Ir?(r?Ap??B.?K?
??/6??F?F??\M|?
/????0?q'6???e??4e?i?e
l6KY?b??8??N??0???
A"??V?a??
O?n?{h????v?7d(.??@I?P(??	??3=}??????*?O
???????;w?/???????b
?w?-:??i???v1g _

?Z??z?4???<O
?x%?P? ????;^????~??K?>/
> ????<lv?M????????????]??
?KW|/~?X
???K?+o*:}???x?*|D:
?Zd?}H?x47??
> Z,E???P??????V??????\??j??N???h??A
????W{?????
> gQ y<?y?Y
~D)BzZ.+?????X:??%???'???f?4??P?@
?H0??`???????
??E??VW???ZmRc?Z?C?TZ?(gH?sI?Z?Cz?+?k??lN??ly?:
????af??&?`?d?,R?"?`?l???B?????d2???b???74???(?;?cc????t?b?g????C!?7????&???Z0?h
(
> ??,2??A??F??M:?k??JO{f?M?????:?.???1??????????H?m????N??Z????i?;]????oh???Yu?9???[^L4?????+???????k??D?&>ffB??GT?[???????AH???
?`P	???L?j
T	????k??J???Q?p~?? ???0|d??????<???P?,??!
?la?4wc:p?o?+?v????_?z??G?x???'p??
X??W?Ez???~??(??^0?}@#?2??B?3??ax???u#?p
N?|???~??g????Q???MWwT?.]?M:M'?O?k????	??L?
> ?0x?G??-? ?T)?-???F?F?]???<uP???S???VA??w?Vd??KDz
?D??p????J_H??J???????k??7?????+O????}8???N????#?M??\?<?
?????4?BqR?f?h???+8?q?d?k??F?7v ?????q4g????i?TX?r

?c???b?V?q?0?v?P%}:??X???.r??5?????1??
??Pm?K??<U+m?????F?A?t?v?	????????
???W??b???/Zx??(p??.4hs?F?WO%??i4??
> ?R	Z?P3i?Q???XR?ME??????d{?t?F?M?BBs4??IK{L+?????p?B?R@6p??`???MK?xY(]?>????R_???x?V??b?n????/??[?k???<8??}???6???v+M?!???V?????=^f?&???????%?t??
?|?s
> R??????{?9ob?4???}??%????y7?]???E????>?/-i?	??'c@?????&
?q?[e???????W?7Z?~^,6?????c?67?M-????}?y??????????|/=l7????*J??M8?1?J`_??????????B=!??B???O?tv
???,???7???IwI??O???\
k?????????%?????w??8??,?4??PT`??nf????|????S'??i:N??4?n?G??????O??o?????AT??????6????g'F??I??m?D:r??d??)?Z?????????K?U??C4?5?0??*M?^??6#C??`???GN?I9{??N?B$???M?^pq%B???q,?x?
9??*?.??E????epIW?v??5??=?w????v?????????6
??????.niX?~???????Fui??Y??????Ga??|?????
?*?m??
?????{??M\;"_???Ia??&?e?X?i?xo???
> ??8?u?tO_??e]O?M Xn????g????e??+?yUl?2V????t3???`)?X??A(,S??"???????xI???M%3C???Z??*_T2?B???b?Z-8h?Y%???,M?"A@c??ac?0?5?C?</???$???`M? ?M?????f??)I?!??DZk?lIz??g???MJ??
???,???h?A?H??n(g?
?}4s`??\<c?????||?=??m?????|?1{????????t????[6?	????p?\?7h????T??????t;????Z#?:(2?W
> ????Fz???+?*F???F???v#???4?n?;??,?????i????)?i??'\??
g???*?f
> &H??O?I?f??YS?0+?~???
> 
????E?xn???^??N<?Y???:??wf]1????-???.[?i?
m?G????j???`f??o????
=!O@??'??&?Z?????k??????<??J{????? ??????????Y???????k?????^8?!&_????N|LOSi^%?4Q0?<b?|\1?kA.2???R@???n|?,???^?g6<??????z?4?}?????D9F?
H???e???n????*JT(l???4?1e2y?P?5?????7?pfl??2F?<Cg??J%????$%TX')??$?R??:?Y?'??uT:????f??????$?Y????_>0??????w?A????;?	
????V???+?;?FC???? ?,?Bc?'??o?$?jJ"8????bFX?gqhmp????4?z????x|;?@?K3?+,gbY??
> F&??!<?(?3
?(??,???h{SO'???N??u

> ?d??.v????kO>???n0???+??x-????	?h&????=???1?w?w<?O?2?4???{??RphV
o???Y3?
!$??z????{UG?I'?et????k??b?U?:.?~y?C?e????/7u??H?{a??_?????9??o????z?_/?)???h0????7????J??+??.??????10a?O?\_??{;~!??k"6????G??S?????
a?9?'?)Pqp
> ?AI?P????<??X

> P`?!?
Q??pJ?$6c?
???n)??X??????q????????T??y???;(???*?4?
> ?@?K?`???? ??Td??P? +?M???+????????<?N?$?n!9??;??RIb?&=?/?n???(????ts[??????z`?2l????P????
?S?g?]??????A???) N?_???QD???4E?2$?{<???????dS?O?Q???A?mw?
N(}??3??U3q??p???@?
????&?????
H?`^?h?c at d? ??8t???????m(??Cm??Z)?(??kBr??"W?1?o???f?n|??????m?Er`YK?A?^?Vo
Q_J3<X??W??	?PW???#F???s?y?????A?y???y????L$????z?>????[?????????uRK.V?????A\4?`p?i;e?7??1Q?_Q??KH?k?4yT??J?(?ZC?19?_?
IC*(D?????????h?n??
?>????1)?3??r????\V}?A?
id\?????L=?;bu???T2?k
:?77s??N?y/?t????)???????d????????????R5?+{?Z??DuT????????
y?9??k???7$??m
~u_?9R'9p?Uo^??`??4]???<U?w+y??U????P|?w????p??Ny?f1*fZ?z?R???<(???=
> ???0?
?%\??P9s??a>?2???v???$?3!xaN?c???
????
???\??????Z?&?.?Q
@?{???
??????^Ao???'?f? `?`?q??F?q
B???QlS<?xYiW^????y?????t?"b(??
y? ????EF??IY?L??+t$
Sp!??i??N?p???)?
????!

UW???	?06???wR8F6??)?BJZH?4?M?R8??????Yt{
> ???????-?-?u???6??????????=???S?i??[W?v?k??e??m????X?j1??8???????+Eyv??
????
m?)^??E??
??X?;?#??U??bk?????XC??*?N???f?c
??v?*?Zl??wF?n?j?u4????????kJ[W6N??+~uH$c??X
m? ??f???
pj~??Y!?Jf.???l??.3?
,v9@'??(???v??emh
j?g5C??j??B??Vt?x??S?v?I?w$3D??????rSX
?	?s?J??_??CnE??B}?L
?y
?H?]???????????N??F??
> ?v??ZQ??D?ZX??
'????^^A([.??)???UL^? ??%?-?
?????n???~??
??????0????~?????u?b???I^}@M^j?
)^??????Y?????$;?N??R>
> A???m?=m'0:!???<????(F#??8?7??????-CS?/?M?S?>?+?
??=???-W???s??s???
t9??Z???x??dO?38?rGm???^??7^???????????)t??-N?'?gc??????o??
??sS??d??d?nqtY?;-?K?eX??????k??V?ce?}?j?c?????????????3;?b?h??m??I????.?
?
?
|? ??	???w?R?sWH?
?
?v?m?(????U:??????
?Q:?
|?[???????["7+?a??P, O?2?|
A??"???l.0f?y?Y?3???\?????L??\?J??????
??l>??]??????????f?Uk0?????h?:
??#?B??V?0?q\?t?W)?t???f+?U~?0?G?kJF?????3Y??y?'?U??
??{u????cT?`?SP???Z;??d8.??{???xc|?6?$VW??L4?_T?h??K?rOf
?????d??	??|?j??F?FN*M6????
?????????
v??w{?d
> endstream
> endobj
> 
> 10 0 obj
> 6200
> endobj
> 
> 11 0 obj
> << /Type /FontDescriptor
>    /FontName /BAAAAA+GillSansMT-Bold
>    /Flags 4
>    /FontBBox [ -176 -229 1165 929 ]
>    /ItalicAngle 0
>    /Ascent 929
>    /Descent -230
>    /CapHeight 929
>    /StemV 80
>    /FontFile2 9 0 R
> >>
> endobj
> 
> 12 0 obj
> << /Length 383
>    /Filter /FlateDecode >>
> stream
> x?]?Mo?@??$??=???
M?EM<?#??
?%)Y???/?/????;3;??x?a{0u??w?????T??????R?Q??q

??.?;?W6E?:????.?4sj?z?:JyC???75?T?Q???f+??9??W?s)?v??4bz??N??JNc???{-Q
???j????|H??y?D\???l+?tE)?0gq????j????#???.?u<??

????Q??? ?+???"B??@???EX?
?m??<BV?X`?r??v?ao{v?G?>
?5}
??&???L>hG?'????v4}?=?>1?>1???IX`?ai??P???3}?u@??'?\0????????????Wk?
?cp????<??k;?M?_,???endstream
> endobj
> 
> 13 0 obj
> << /Type /Font
>    /Subtype /TrueType
>    /BaseFont /BAAAAA+GillSansMT-Bold
>    /FirstChar 0
>    /LastChar 34
>    /Widths [ 1000 719 405 270 541 551 448 277
>      770 676 884 551 270 551 801 530
>      583 426 604 500 583 958 270 509
>      500 594 583 520 333 583 270 509
>      583 551 583 ]
>    /FontDescriptor 11 0 R
>    /ToUnicode 12 0 R
> >>
> endobj
> 
> 14 0 obj
> << /F1 13 0 R
>    /F2 8 0 R
>    >>
> endobj
> 
> 15 0 obj
> <<
>    /Font 14 0 R
>    /ProcSet [ /PDF ]
> >>
> endobj
> 
> 16 0 obj
> << /Type /Page
>    /Parent 3 0 R
>    /Resources 15 0 R
>    /MediaBox [ 0 0 842 595 ]
>    /Contents 1 0 R
> >>
> endobj
> 
> 3 0 obj
> << /Type /Pages
>    /Resources 15 0 R
>    /MediaBox [ 0 0 595 842 ]
>    /Kids [ 16 0 R
>            ]
>    /Count 1
> >>
> endobj
> 
> 17 0 obj
> << /Type /Catalog
>    /Pages 3 0 R
> >>
> endobj
> 
> 18 0 obj
> << /Author <FEFF004A0065006E0073002000480061006D0069007300630068>
> /Creator <FEFF0044007200610077>
> /Producer <FEFF0053007400610072004F0066006600690063006500200037>
> /CreationDate (D:20060817201019+02'00')
> >>
> endobj
> 
> xref
> 0 19
> 0000000000 65535 f
> 0000000017 00000 n
> 0000001815 00000 n
> 0000017415 00000 n
> 0000001842 00000 n
> 0000008668 00000 n
> 0000008693 00000 n
> 0000008932 00000 n
> 0000009397 00000 n
> 0000009754 00000 n
> 0000016060 00000 n
> 0000016086 00000 n
> 0000016331 00000 n
> 0000016797 00000 n
> 0000017162 00000 n
> 0000017218 00000 n
> 0000017285 00000 n
> 0000017553 00000 n
> 0000017613 00000 n
> trailer
> << /Size 19
>    /Root 17 0 R
>    /Info 18 0 R
> >>
> startxref
> 17844
> %%EOF

> Database Tables
> ===============
> 
> New tables
> ----------
>     vtiger_orgunit
> 
> 	Description:
> 	    Defines a oranizational unit
> 
> 	Columns
> 	    orgunitid		serial NOT NULL
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    type		character varying(30)
> 	    name		character varying(60) NOT NULL
> 	    address		character varying(150)
> 	    city   		character varying(100)
> 	    state  		character varying(100)
> 	    country		character varying(100)
> 	    code   		character varying(30)
> 	    phone  		character varying(30)
> 	    fax    		character varying(30)
> 	    website		character varying(100)
> 
> 	Constraints:
> 	    vtiger_orgunit_pkey
> 		PRIMARY KEY (orgunitid)
> 
> 	    fk_1_vtiger_orgunit
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_orgunit_name_idx
> 		ON vtiger_orgunit
> 		USING btree (orgid, name)
> 
> 	    vtiger_orgunit_type_idx
> 		ON vtiger_orgunit
> 		USING btree (orgid, type)
> 
> 
>     vtiger_orgunittype
> 
> 	Description:
> 	    Defines the values to be entered into vtiger_orgunit.type
> 
> 	Columns:
> 	    orgunittypeid	serial NOT NULL
> 	    orgunittype		character varying(30)
> 	    sortorderid		integer DEFAULT 0 NOT NULL
> 	    presence		integer DEFAULT 1 NOT NULL
> 
> 	Constraints:
> 	    vtiger_orgunittype_pkey
> 		PRIMARY KEY (orgunittypeid)
> 	
> 	Indices:
> 	    vtiger_orgunittype_type_idx
> 		ON vtiger_orgunittype
> 		USING btree (type)
> 
> 
>     vtiger_user2org
> 
> 	Description:
> 	    Defines a list of organizations a user may work for
> 
> 	Columns:
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    userid		integer	NOT NULL DEFAULT 0
> 	    primary		boolean DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_user2org
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_user2org
> 		FOREIGN KEY (userid)
> 		REFERENCES vtiger_users(userid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_user2org_orgid_idx
> 		ON vtiger_user2org
> 		USING btree (orgid)
> 
> 	    vtiger_user2org_userid_idx
> 		ON vtiger_user2org
> 		USING btree (userid)
> 
> 
>     vtiger_user2orgunit
> 
> 	Description:
> 	    Defines a list of organizational units a user is
> 	    assigned to
> 
> 	Columns:
> 	    orgunitid		integer	NOT NULL DEFAULT 0
> 	    userid		integer	NOT NULL DEFAULT 0
> 	    primary		boolean DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_user2orgunit
> 		FOREIGN KEY (orgunitid)
> 		REFERENCES vtiger_orgunit(orgunitid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_user2orgunit
> 		FOREIGN KEY (userid)
> 		REFERENCES vtiger_users(userid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_user2orgunit_orgid_idx
> 		ON vtiger_user2orgunit
> 		USING btree (orgunitid)
> 
> 	    vtiger_user2orgunit_userid_idx
> 		ON vtiger_user2orgunit
> 		USING btree (userid)
> 
> 
>     vtiger_entity2org
> 
> 	Description:
> 	    Assignes entities to particular organizations
> 
> 	Columns:
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    crmid		integer	NOT NULL DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_entity2org
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_entity2org
> 		FOREIGN KEY (crmid)
> 		REFERENCES vtiger_crmentity(crmid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_entity2org_crmid_idx
> 		ON vtiger_entity2org
> 		USING btree (crmid)
> 
> 	    vtiger_entity2org_userid_idx
> 		ON vtiger_entity2org
> 		USING btree (userid)
> 
> 
> Changes
> -------
>     1.  vtiger_campaing should be a vtiger_crmentity
> 	-> Add the following constraint to the database
> 
> 	    fk_r_vtiger_campaign
> 		FOREIGN KEY (campaignid)
> 		REFERENCES vtiger_crmentity(crmid)
> 		ON DELETE CASCADE
> 
> 	-> Provide a migration script for already stored campaigns
> 	
> 
> PHP changes
> ===========
> Administrators Role
> -------------------
>     1.  Settings -> Company Details
> 	- ListView
> 	- Add
> 	- Delete
> 	- Change
> 
>     2.  Settings -> Users
> 	- User is a member of one or more companies
> 	  (implement like the group membership assignement)
> 	- Assign one main company to the user (out of the 
> 	  membership list).
> 
> CEO Role
> --------
>     1.  Settings -> Company Details
> 	- Change deatils only for the companies, the user has a 
> 	  CEO role for
> 
>     2.  Settings -> Company Unit
> 	- ListView
> 	- Add
> 	- Delete
> 	- Change
> 	
>     3.  Settings -> Users
> 	- User is a member of one or more organization units
> 	  (take care to provide only those units of organizations/
> 	   companies to which the user already is assigned).
> 	- Assign one main orgunit to the user (out of the 
> 	  membership list).
> 
> Standard user role
> ------------------
>     1.  login scheme
> 	After the login the authenticated user gets another 
> 	window which lets him select the organization/company
> 	he's going to act for in the new session.
> 
> 	Open item: Skip this second login step if there's only
> 	one organization assigned to that user?
> 
> 	My proposal:
> 	    For the time being: yes. 
> 	    This would be subject of further FCRs (like book-
> 	    keeping - booking date selection on login).
> 
> 	Open item: Display the organization selection somewhere
> 	during the entire session?
> 
> 	My proposal: yes, upper right corner with the user name
> 
>     2.  Assignment of entities to exactly one company/organization
> 	This affects:
> 	- Quotes
> 	- Sales orders
> 	- Invoices
> 	- Price Books
> 	The company assignement is taken from the selection, the
> 	user did during login.
> 
>     3.  Assignment of entities to more than one company/organization
> 	This affects
> 	- Leads
> 	- Accounts
> 	- Contacts
> 	- Potentials
> 	- Products
> 	- Campaigns
> 	To the modification/add forms another list entity is to
> 	be added. This list fills the crmentity2org table. Users
> 	may add/delete entries to/from this table.
> 
> 	Open item: May this table be empty?
> 
>     4.  Assignment of entities to orgunits
> 	This affects:
> 	- Quotes
> 	- Sales orders
> 	- Invoices
> 	- Price Books
> 	The company assignement is taken from the selection, the
> 	user did during login.
> 
>     5.  PDF generation
> 	Addresses to be takenout of the organization table according
> 	to the organization reference of the affected entity.
> 	Addresses may be overridden by orgunit references.
> 
> General
> -------
>     1.  The role assignments shown above results in permissions
> 	to be maintained.
> 
>     2.  Do we use the term 'company' as in the GUI or 'organization'
> 	as in the database? (No preferences from my side ... only
> 	that there should be a common understanding).
> 
>     3.  Should there be a more sophisticated relationship between
> 	entities and organizations (also orgunits)? May like
> 
> 	    If a product is assigned to company A and B:
> 	    May both companies change product details or should
> 	    there still be an ownership assigned to one of the
> 	    companies?
> 
> 	This could be done using flags in the entity2org table
> 	but would result in more sophisticated GUI operations.

> _______________________________________________
> Get started with creating presentations online - http://zohoshow.com?vt 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      



From jeri at vtiger.com  Wed Nov 15 04:24:21 2006
From: jeri at vtiger.com (Jeri John)
Date: Wed, 15 Nov 2006 17:54:21 +0530
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
Message-ID: <10eeb932d91.-1068791366129115790.2050524429825132071@@vtiger.com>

Dear James, 
 Thanks for your fix.We have integrated it and it is available in the SVN. 
 
Thanks & Regards, 
Jerry.




---- James Tillman&lt;jamestillman at sevatechnologies.com&gt; wrote ---- 

 ((If someone would fix the forums registration, I'll gladly start posting these issues on the forums if this is not the correct venue.&nbsp; Until then, I assume reporting in some way is better than not reporting at all.)) &nbsp; modules/Emails/Emails.php seems to be lacking some key class-level fields.&nbsp; Namely, these: &nbsp; var $rel_users_table = "vtiger_salesmanactivityrel";var $rel_contacts_table = "vtiger_cntactivityrel";var $rel_serel_table = "vtiger_seactivityrel"; It makes use of these fields in its code, as in the function set_emails_contact_invitee_relationship(), but they are not set anywhere in the class. &nbsp; This problem comes to light when you attempt to use the Outlook plugin to link emails to a vtiger contact.&nbsp; You get the typical "Invalid return value from vtigerCRM" error message. &nbsp; I inserted the lines mentioned above at line 38 in Emails.php and Outlook email linking started to work. &nbsp; Most of the Outlook interaction with vtiger in&nbsp;v502&nbsp;seems to be sadly broken out of the box. &nbsp; By the way, anyone thought of improving the Outlook plugin to do something other than stupidly report that vtiger returned an invalid response?&nbsp; Having to use Fiddler or some other HTTP inspection utility to just to find the PHP error message from vtiger is time-consuming. &nbsp; jpt _______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061115/5a0a92eb/attachment.htm

From philip at vtiger.com  Thu Nov 16 07:30:25 2006
From: philip at vtiger.com (Philip)
Date: Thu, 16 Nov 2006 21:00:25 +0530
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
 and general column layout
In-Reply-To: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
References: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
Message-ID: <10ef163e45a.3319490668445686029.-7775633052489133351@@vtiger.com>


Hi Niel,

Thanks for your effort in resolving the UI issue we'll test your filesin out test bed and check-in into the 5.0.3 repo if everything is fine,else we'll get back to you if we face any issue.

Regards,
Philip



---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au> wrote ---- 

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061116/92aed265/attachment.html

From dgrant at accuratetechnologies.com  Thu Nov 16 07:41:34 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Thu, 16 Nov 2006 10:41:34 -0500
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
	and general column layout
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.com>

I actually "solved" this problem a different way:

 

I have now explicitly wordwrapped all multi-line textareas to 80 chars,
both with WRAP=HARD and with a counting/wrapping function on the backend
(AJAX doesn't seem to support WRAP=HARD)

 

This way, the text entered in the textarea and the text returned from
the database wrap the same - what you see is how it is stored.

 

It's a lot simpler, and it works with AJAX.

 

DG 

 

  _____  

From: Philip [mailto:philip at vtiger.com] 
Sent: Thursday, November 16, 2006 10:30 AM
To: vtigercrm-developers at lists.vtigercrm.com
Cc: vtigercrm-developers at lists.vtigercrm.com
Subject: Re: [Vtigercrm-developers] Files to fix word wrapping of long
items and general column layout

 


Hi Niel,

Thanks for your effort in resolving the UI issue we'll test your files
in out test bed and check-in into the 5.0.3 repo if everything is fine,
else we'll get back to you if we face any issue.

Regards,
Philip



---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au>
wrote ---- 

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems
do
not wrap correctly and resizing the browser window doesn't help. See
ticket my #2564 and others. I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well;
wrapping
correctly when the user chooses to alter the width of his or her browser
window. In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's
and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo". Both of these now have a width
setting
that you can play with. You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected
because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in
lots
of places such as Change Password and Data Migration. This means that
I've
ended up tweaking (and fixing some bugs in) lots of tables. Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views". A Detail View shows the details for one item,
e.g.
a Contact, a Quote etc. Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory
tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting. These
now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View)
such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of
course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of
a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***. I've only
giving
you a new style.css for Blue Lagoon (any other theme will look a mess
with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you
can!

4) Now resize your browser window and check that everything wraps
neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css. This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these
files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been
used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View. This is causing confusion. For example there are multiple
styles defining the same heading of different tables both using Detail
View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having
four
columns: Label, Data, Label, Data. The headings for many different types
of tables are substantially identical. Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell
level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align". The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout. Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored
with
the link information for the image. Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells. In the
past
they used to be required to ensure a cell would display properly. If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left
aligned),
e.g. <td>{$data}&nbsp;</td> NOT <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of
these
changes. I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful. I spent a reasonable time
reformatting. (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061116/84365744/attachment.htm

From neil.temperley at exemail.com.au  Thu Nov 16 15:59:38 2006
From: neil.temperley at exemail.com.au (neil.temperley@exemail.com.au)
Date: Fri, 17 Nov 2006 10:59:38 +1100 (EST)
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
 and general column layout
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.co
	m>
References: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.com>
Message-ID: <4257.203.143.170.20.1163721578.squirrel@webmail.exetel.com.au>

Hi Dennis,

Basically what I did was reduce the number of hard wired overrides to the
default style to a minimum and I also eliminated nowraps.  A nowrap on one
cell will often affect a whole column.

Since a 4 column "Detail View" is a standard table layout, I was able to
move the column width info into style.css.  This gives a knowledgable user
nice control over the relative column widths of a "Detail View" by
tweaking column width settings.

But the biggest gain is that all columns resize correctly to the window
width of the user's browser.  This is really nice.  Any user can resize
the window to suit their preference and the columns self adjust and wrap
accordingly.

Since the browser does the wrapping work it works with AJAX (and
multibyte) without additional coding.

Finally I was able to maximise the space for Notes and Descriptions etc by
getting them to span the full row.


BTW, several months back I helped implement code to force a wrap of
Multi-select combo box lists in Smarty, but this (as you know) required a
matching JavaScript fix for AJAX as well.  I always felt this was a
kludge; a hardwired column width that ignores the users browser window
should be avoided if possible.  With the new files I removed the 'kludge'.

regards,
Neil

> I actually "solved" this problem a different way:
>
>
>
> I have now explicitly wordwrapped all multi-line textareas to 80 chars,
> both with WRAP=HARD and with a counting/wrapping function on the backend
> (AJAX doesn't seem to support WRAP=HARD)
>
>
>
> This way, the text entered in the textarea and the text returned from
> the database wrap the same - what you see is how it is stored.
>
>
>
> It's a lot simpler, and it works with AJAX.
>
>
>
> DG
>
>
>
>   _____
>
> From: Philip [mailto:philip at vtiger.com]
> Sent: Thursday, November 16, 2006 10:30 AM
> To: vtigercrm-developers at lists.vtigercrm.com
> Cc: vtigercrm-developers at lists.vtigercrm.com
> Subject: Re: [Vtigercrm-developers] Files to fix word wrapping of long
> items and general column layout
>
>
>
>
> Hi Niel,
>
> Thanks for your effort in resolving the UI issue we'll test your files
> in out test bed and check-in into the 5.0.3 repo if everything is fine,
> else we'll get back to you if we face any issue.
>
> Regards,
> Philip
>
>
>
> ---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au>
> wrote ----
>
> Dear vtiger developers,
>
> please find attached a gzipped tar file of changes I'm suggesting to the
> vtiger user interface to cope with the problem that long item problems
> do
> not wrap correctly and resizing the browser window doesn't help. See
> ticket my #2564 and others. I've made these corrections to SVN 9765.
>
> In particular my aim was to make all "Detail Views" format well;
> wrapping
> correctly when the user chooses to alter the width of his or her browser
> window. In particular I wanted to ensure that fields such as Comments,
> Notes, Description, Terms & Conditions, Mailing Street and Multi-select
> Combo Boxes worked correctly with long items regardless of window width.
> Also, I've ensured that these wide items (including Contact Image (i.e.
> Photo)) now span multiple columns to provide a neater layout.
>
> With these changes, the user has significant control over column width's
> and
> layout in Detail Views by altering the two classes in the style.css file
> ".dvtCellLabel" and ".dvtCellInfo". Both of these now have a width
> setting
> that you can play with. You can choose values that give you column
> proportions pretty similar to vtiger's existing proportions, or you can
> choose values that enable more data to be fitted to the screen.
>
> Unfortunately, to implement these changes many files were affected
> because
> these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in
> lots
> of places such as Change Password and Data Migration. This means that
> I've
> ended up tweaking (and fixing some bugs in) lots of tables. Where
> reasonable I've tried to replace the use of these with the more generic
> .cellLabel and .cellInfo.
>
> Some of the "tables" affected are as follows.
>
> 1) All "Detail Views". A Detail View shows the details for one item,
> e.g.
> a Contact, a Quote etc. Detail Views are found in Contacts, Leads,
> Potentials, Accounts, Notes, User and all the items under the Inventory
> tab,
> e.g. Quotes and Invoices.
>
> 2) The Advance Filter tables used in Custom View and Reporting. These
> now
> resize well and can accept long "OR" combinations of search strings.
>
> 3) Odd places (which in my mind do not really constitute a Detail View)
> such
> as Change Password, Convert Lead, Calendar and Data Migration.
>
> Files most affected are:
> DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of
> course.
>
>
> How to proceed.
>
> 1) Untar the archive files into your vtigercrm root directory on top of
> a
> SVN 9765 version.
>
> 2) Log-on to vtiger using the *** Blue Lagoon Theme ***. I've only
> giving
> you a new style.css for Blue Lagoon (any other theme will look a mess
> with
> no word wrapping)!!!!
>
> 3) Edit a Contact and create lots of long entries in every field you
> can!
>
> 4) Now resize your browser window and check that everything wraps
> neatly.
>
> 5) If you want to play with the layout: in themes, open
> bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
> For experts, you may want to copy bluelagoon/style-developer.css to
> bluelagoon/style.css. This will give you a fairly ugly colour scheme but
> will clearly show the places that have been affected by my changes.
>
> 6) Note I reformatted the indentation of portions of the code in these
> files
> where I thought indentation was poor or hard to follow.
>
>
> Some of the things that I have learnt through this process.
>
> 1) There are multiple style classes used in vtiger and some have been
> used
> inconsistently.
> One problem is that there is no clear definition of what constitutes a
> Detail View. This is causing confusion. For example there are multiple
> styles defining the same heading of different tables both using Detail
> View
> style classes, e.g. .detailedViewHeader and .dvInnerHeader.
>
> I'd like to suggest that we restrict Detail View tables to those having
> four
> columns: Label, Data, Label, Data. The headings for many different types
> of tables are substantially identical. Rather than create new style for
> every situation or table, it is probably best to minimise the number of
> styles and use generic names such as .headingLevel2 or .selectBox where
> possible.
>
> 2) Note that HTML statements such as <table class='small'> or <tr
> class='small'> don't seem to propagate the font style down to cell
> level.
> I'm not sure why not.
>
> 3) Note also that an HTML statement like:
> <td align="left" class="txtBox">
> may not do what you want since the class setting always takes precedence
> over the "align". The better choice is this
> <td style="text-align:left;" class="txtBox">
> which will always work.
>
> 4) One nowrap type item in a table cell can turn off wrapping for the
> **whole column** of data and ruin the layout. Avoid using nowrap!
>
> 5) I couldn't resize images since the HTML sizing seems to be stored
> with
> the link information for the image. Photos are too large by default.
>
> 6) I don't think &nbsp; codes are required in empty data cells. In the
> past
> they used to be required to ensure a cell would display properly. If you
> need to include one, put it **after** the data not in front so that the
> alignment of the data is not disturbed (assuming the data is left
> aligned),
> e.g. <td>{$data}&nbsp;</td> NOT <td>&nbsp;{$data}</td>.
>
>
> Please let me know if you find any formatting disasters as a result of
> these
> changes. I've tried this with Firefox 1.5 and IE 6.0.
>
> I tried hard to be neat and careful. I spent a reasonable time
> reformatting. (Yes, I spent way way too long on this :-))
>
> Best regards,
> Neil
>
> Neil Temperley
> Skype: neil.temperley
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com



From Dirk.Gorny at genion.de  Fri Nov 17 01:48:57 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Fri, 17 Nov 2006 10:48:57 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
Message-ID: <200611171048.58005.Dirk.Gorny@genion.de>

Am Montag, 6. November 2006 17:57 schrieb Dhr. R.R. Gerbrands:

> @Dirk, could you give us your idea's on more specific improvements,
> compared with openCRX?

For sure, at first it is supports high class DBMS like DB2, Oracle, and 
MS-SQL.
- openCRX is a completely i18n application with many supportet languages. 
English, German, Spanisch, Chinese, French, Polish , Portuguese, Russian, 
Swedish, Turkish, and Farsi are included.
- For integration it supports RMI, CORBA, JMS, JCA.
- You need only one deployment and one set of tables to manage a hundred of 
different mandators.
- there is the possibility to export and import complex objects with their 
substructure in XML.
-You can sync Offline/Mobile Client and Server.

These are only a few things. The most you can see at 
http://www.opencrx.org/tour-features.htm.

Depending on the architecture (J2EE, OMG/MDA) they work with a core team 
consists of 3 people.

Best regards,

Dirk

From naterajj at hotmail.com  Mon Nov 20 11:00:47 2006
From: naterajj at hotmail.com (Juan Natera)
Date: Mon, 20 Nov 2006 11:00:47 -0800
Subject: [Vtigercrm-developers] Adding another asigned user's field to the
	Lead's Module
Message-ID: <BAY116-F30A4A860B57C70A6348D96C2ED0@phx.gbl>

Hi,

I need to have 2 users assigned per Lead, I was looking for recomendations 
on how to do this, Adding a regular custom field with users from the 
settings page won't acomplish what we want, since we need the 
notifications/reports and such to affect both users.

Thanks in advance,

Juan Natera

_________________________________________________________________
Get the latest Windows Live Messenger 8.1 Beta version.燡oin now. 
http://ideas.live.com


From joe at tsolucio.com  Mon Nov 20 11:25:28 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Mon, 20 Nov 2006 20:25:28 +0100
Subject: [Vtigercrm-developers] Is the list active?
Message-ID: <1164050728.2936.34.camel@joesunix.int>

Hi,

For some time now there is very little activity on this list. The last
4/5 emails I have sent haven't been answered, fixed or commented on.

The ones I would like to know about are:

-> vtiger popup calendar start day of the week
-> new vtiger_entityname table
-> Latest news section in vtigerforge isn't updating
-> DMS

Is there another place where we should ask these questions?

Regards, Joe
TSolucio


From neil.temperley at exemail.com.au  Mon Nov 20 14:27:02 2006
From: neil.temperley at exemail.com.au (Neil Temperley)
Date: Tue, 21 Nov 2006 09:27:02 +1100
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
	andgeneral column layout
In-Reply-To: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
Message-ID: <000001c70cf3$02f2eed0$6501a8c0@Nemrut>

Dear All,

This archive has some minor fixes to two files in the version I sent
previously.  Additional altered files fix a layout issue for "Edit" and
"Create" views... now the spacing/layout of the copy address radio buttons
is improved.  (As far as I can tell these files can be dropped on top of SVN
9848 and everything works OK.)

Regards,
Neil

-----Original Message-----
From: vtigercrm-developers-bounces at lists.vtigercrm.com
[mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf Of Neil
Temperley
Sent: Monday, 13 November 2006 21:27
To: vtigercrm-developers at lists.vtigercrm.com
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
andgeneral column layout

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox">
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this <td style="text-align:left;"
class="txtBox"> which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.14.3/530 - Release Date: 11/11/06
18:53
 
    
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtiger-Neil-20061121.tar.gz
Type: application/x-gzip
Size: 85673 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/e18da66b/vtiger-Neil-20061121.tar-0001.bin

From g.un at freemail.hu  Mon Nov 20 15:14:30 2006
From: g.un at freemail.hu (mikozod hozza)
Date: Tue, 21 Nov 2006 00:14:30 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
Message-ID: <freemail.20061021001430.78055@fm13.freemail.hu>

Hello,

 I would need help why the example at
http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
does not work for me.
I have installed vTiger 5.2.0 on Linux box.
I put this query:
"insert into vtiger_field values( 4, '',
'event_time','vtiger_login_hist', 2, 5, 'event_time',
'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
vtiger_login_hist is my prop table., event_time is one of
its field.
Then I got some error when visiting a certain Contact:
"Fatal error: Call to a member function Move() on a
non-object in
/var/www/vtigercrm/include/database/PearDatabase.php "
This error comes from query_result function.
When I switched on debugging info it was seen that result
parameter received here was empty.
Actually I don't know what I made wrong.
The whole purpose of my experiment would be to have a
proprietary field on Contacts/More information.
I hope some one can help me here.

br,

Gabor

______________________________________________________________________
KGFB-2007 az Els? Online Alkuszt?l! K?sse n?lunk ?jra k?telez? biztos?t?s?t! 
Az ?sszes biztos?t? egy helyen, Online kedvezm?nyek, egyszer? ?gymenet.
http://www.netrisk.hu




From dan.means at teamsrs.com  Mon Nov 20 18:45:07 2006
From: dan.means at teamsrs.com (Dan Means)
Date: Mon, 20 Nov 2006 18:45:07 -0800
Subject: [Vtigercrm-developers] Is the list active?
In-Reply-To: <1164050728.2936.34.camel@joesunix.int>
References: <1164050728.2936.34.camel@joesunix.int>
Message-ID: <45626833.2030901@teamsrs.com>

I think everybody's just exhausted and busy...

Joe Bordes wrote:

>Hi,
>
>For some time now there is very little activity on this list. The last
>4/5 emails I have sent haven't been answered, fixed or commented on.
>
>The ones I would like to know about are:
>
>-> vtiger popup calendar start day of the week
>-> new vtiger_entityname table
>-> Latest news section in vtigerforge isn't updating
>-> DMS
>
>Is there another place where we should ask these questions?
>
>Regards, Joe
>TSolucio
>
>_______________________________________________
>Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
>  
>

-- 
Dan Means
Mission Viejo, CA
www.dkmeansonline.com
www.teamsrs.com


From joe at tsolucio.com  Tue Nov 21 01:08:59 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 10:08:59 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021001430.78055@fm13.freemail.hu>
References: <freemail.20061021001430.78055@fm13.freemail.hu>
Message-ID: <1164100139.10220.3.camel@joesunix.int>

The second value of your insert is an empty string. It should be a
numeric value obtained from the function getUniqueID("vtiger_field").


El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> Hello,
> 
>  I would need help why the example at
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> does not work for me.
> I have installed vTiger 5.2.0 on Linux box.
> I put this query:
> "insert into vtiger_field values( 4, '',
> 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> vtiger_login_hist is my prop table., event_time is one of
> its field.
> Then I got some error when visiting a certain Contact:
> "Fatal error: Call to a member function Move() on a
> non-object in
> /var/www/vtigercrm/include/database/PearDatabase.php "
> This error comes from query_result function.
> When I switched on debugging info it was seen that result
> parameter received here was empty.
> Actually I don't know what I made wrong.
> The whole purpose of my experiment would be to have a
> proprietary field on Contacts/More information.
> I hope some one can help me here.
> 
> br,
> 
> Gabor
> 
> ______________________________________________________________________
> KGFB-2007 az Els? Online Alkuszt?l! K?sse n?lunk ?jra k?telez? biztos?t?s?t! 
> Az ?sszes biztos?t? egy helyen, Online kedvezm?nyek, egyszer? ?gymenet.
> http://www.netrisk.hu
> 
> 
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


From joe at tsolucio.com  Tue Nov 21 01:10:14 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 10:10:14 +0100
Subject: [Vtigercrm-developers] Is the list active?
In-Reply-To: <45626833.2030901@teamsrs.com>
References: <1164050728.2936.34.camel@joesunix.int>
	<45626833.2030901@teamsrs.com>
Message-ID: <1164100214.10220.4.camel@joesunix.int>

Ok, that's normal. At least I know I am on the right list :-)

Thanks, Joe
El lun, 20-11-2006 a las 18:45 -0800, Dan Means escribi?:
> I think everybody's just exhausted and busy...
> 
> Joe Bordes wrote:
> 
> >Hi,
> >
> >For some time now there is very little activity on this list. The last
> >4/5 emails I have sent haven't been answered, fixed or commented on.
> >
> >The ones I would like to know about are:
> >
> >-> vtiger popup calendar start day of the week
> >-> new vtiger_entityname table
> >-> Latest news section in vtigerforge isn't updating
> >-> DMS
> >
> >Is there another place where we should ask these questions?
> >
> >Regards, Joe
> >TSolucio
> >
> >_______________________________________________
> >Reach hundreds of potential candidates - http://jobs.vtiger.com 
> >
> >  
> >
> 


From alex.svetos at gmail.com  Tue Nov 21 01:41:56 2006
From: alex.svetos at gmail.com (alex svetos)
Date: Tue, 21 Nov 2006 10:41:56 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021001430.78055@fm13.freemail.hu>
References: <freemail.20061021001430.78055@fm13.freemail.hu>
Message-ID: <26debbf70611210141u4d62a48fw1a3c5f9ac3e75e68@mail.gmail.com>

> Hello,
>
> I would need help why the example at
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> does not work for me.
> I have installed vTiger 5.2.0 on Linux box.
> I put this query:
> "insert into vtiger_field values( 4, '',
> 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> vtiger_login_hist is my prop table., event_time is one of
> its field.
> Then I got some error when visiting a certain Contact:
> "Fatal error: Call to a member function Move() on a
> non-object in
> /var/www/vtigercrm/include/database/PearDatabase.php "
> This error comes from query_result function.
> When I switched on debugging info it was seen that result
> parameter received here was empty.
> Actually I don't know what I made wrong.
> The whole purpose of my experiment would be to have a
> proprietary field on Contacts/More information.
> I hope some one can help me here.
>
> br,
>
> Gabor


Hi,

I don't understand what you want to do. But if you want to add a new field
in a Contact you should do something like this :
if you want to add a new field on Contact, assuming your field ids called
'card_number' you should insert a new line in vtiger field with thoses
values :

insert into a vtiger_contact values (4, an_unused_field_id, 'card_number',
'card_number',
'vtiger_contactdetails',1,7,'card_number','card_number',1,0,0,15,0,4,1,'I~O',1,NULL,'ADV'
)

And add a the new column in vtiger_contactdetails.

(assuming your new field is called 'mobile_phone' and is used to store a
phone number.)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/a5221807/attachment.htm

From sergiokessler at gmail.com  Tue Nov 21 04:54:56 2006
From: sergiokessler at gmail.com (Sergio A. Kessler)
Date: Tue, 21 Nov 2006 09:54:56 -0300
Subject: [Vtigercrm-developers] separation in calendar
Message-ID: <49216030611210454q7739413cs7bccead9f47e0098@mail.gmail.com>

in the calendar screen there is a visual separation between events of types:

Call & Meetings (left tab)
To Dos (right tab)

but the button "Add" permit to add any type of event (Call, Meeting or
ToDo event)...

why there is two tabs ?

would'n it be better if the daily, weekly views show the three events
types without any tabs ??


salute,
/sergio

From g.un at freemail.hu  Tue Nov 21 06:19:02 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 15:19:02 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164100139.10220.3.camel@joesunix.int>
Message-ID: <freemail.20061021151902.54391@fm10.freemail.hu>

hi

> The second value of your insert is an empty string. It
should be a
> numeric value obtained from the function
getUniqueID("vtiger_field").
Actually it is enough if you issue this query in mysql. I
have used this query in mysql and it always assigns a unique
value there.

> 

> 
> El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> > Hello,
> > 
> >  I would need help why the example at
> >
http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> > does not work for me.
> > I have installed vTiger 5.2.0 on Linux box.
> > I put this query:
> > "insert into vtiger_field values( 4, '',
> > 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> > 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> > vtiger_login_hist is my prop table., event_time is one of
> > its field.


___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm




From g.un at freemail.hu  Tue Nov 21 06:25:58 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 15:25:58 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <26debbf70611210141u4d62a48fw1a3c5f9ac3e75e68@mail.gmail.com>
Message-ID: <freemail.20061021152558.6346@fm10.freemail.hu>



alex svetos <alex.svetos at gmail.com> ?rta:

> I don't understand what you want to do. But if you want to
add a new field

Actually I have defined a new table in vtiger database
(vtiger_login_hist). I wan to make the certain contact's
last login time to be displayed on Contacts/More Information
tab.
Technically I don't know for 100% sure how this should be
achieved. This is why I bother you here on this list:)
I have made some attempt based on online documentation on
vtiger page but those were failed. And I don't know where to
start to looking for my fault.  

> in a Contact you should do something like this :
> if you want to add a new field on Contact, assuming your
field ids called
> 'card_number' you should insert a new line in vtiger field
with thoses
> values :
> 
> insert into a vtiger_contact values (4,
an_unused_field_id, 'card_number',
> 'card_number',
>
'vtiger_contactdetails',1,7,'card_number','card_number',1,0,0,15,0,4,1,'I~O',1,NULL,'ADV'
> )
> 
> And add a the new column in vtiger_contactdetails.
> 
> (assuming your new field is called 'mobile_phone' and is
used to store a
> phone number.)
> 
Did I get it right that I have to update three tables in
database for this case? These table are: vtiger_field,
vtiger_contact and vtiger_contactdetails, aren't they?

thanks for help so far!

Gabor

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm




From joe at tsolucio.com  Tue Nov 21 06:56:24 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 15:56:24 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021151902.54391@fm10.freemail.hu>
References: <freemail.20061021151902.54391@fm10.freemail.hu>
Message-ID: <1164120984.10220.52.camel@joesunix.int>

HI,

El mar, 21-11-2006 a las 15:19 +0100, gabor escribi?:
> hi
> 
> > The second value of your insert is an empty string. It
> should be a
> > numeric value obtained from the function
> getUniqueID("vtiger_field").
> Actually it is enough if you issue this query in mysql. I
> have used this query in mysql and it always assigns a unique
> value there.

Yes, this is because the field is defined as an auto-increment. The
problem is that this procedure does NOT update the value in
vtiger_field_seq so any new module or maybe some patches are going to
get into trouble with overwritten field values. It's OK if your sure you
are never going to add anything somebody else has done.

The correct way to do this is launch the SQL insert and then modify the
value in vtiger_field_seq accordingly.

Joe
TSolucio
> 
> > 
> 
> > 
> > El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> > > Hello,
> > > 
> > >  I would need help why the example at
> > >
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> > > does not work for me.
> > > I have installed vTiger 5.2.0 on Linux box.
> > > I put this query:
> > > "insert into vtiger_field values( 4, '',
> > > 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> > > 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> > > vtiger_login_hist is my prop table., event_time is one of
> > > its field.
> 
> 
> ___________________________________________________________
> A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
> http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm
> 
> 
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


From oded at atelis.net  Tue Nov 21 07:24:22 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 17:24:22 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <1164122662.13078.56.camel@x-23.atelis.net>


Hi all.

I'm evaluating vTiger CRM for my company, and there are several issues
where either I don't understand how to do things using vTiger CRM or
vTiger CRM is missing important functionality (important to my company ,
anyway ;-).

If its ok, I'd like to raise these issues here - not all at once, of
course - and get some feedback, and possibly solutions to these.

I'll start with the first question then:
We've developed an in-house inventory management application to manager
our sales of hardware products - we are resellers for a company that
manufactures extension cards for PCs. Each such card has a name, model
number and a serial number, where the serial number in unique for each
item - not product.

In our own inventory application, there is a "product" entity which has
a model number, and each product has several serial number assigned to
it. Due to commercial issues with out supplier (tracking eligability of
customers for support) , we need to track each item that is shipped,
using the serial number. Whenever we receive a delivery, we go over the
boxed and add the serial number of every item under the product entity
for that type of product. When we sell a product, we remove the item
serial number from the inventory.

We are not trying to use vTiger CRM to track inventory instead, but
apparently in vTiger CRM, the product entity carries the serial number,
so each product can have only one serial number available in the
inventory. This forces us to either register each boxed item we receive
as a product or ignore the serial numbers. We can't do the latter, and
the former is problematic due to several reasons:
- Creating a product entry is complicated and time consuming - creating
500 product entries for a shipment of 500 boards takes considerably more
time then recording 500 serial numbers somewhere.
- Product views (such as "Search for product" in the invoice editor)
rarely list the serial number, so you basically get a list containing
several dozens (sometimes hundreds, depending on the item) of similar
entries and one has to guess which carries the correct serial number.
- Inventory reports listing item quantity become completely useless.

Is there a way to do what we need that I wasn't aware of ?

Thanks.

--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
Nobody takes a bribe.  Of course at Christmas if you happen to hold out
your hat and somebody happens to put a little something in it, well,
that's different.
    -- New York City Police Commissioner (Ret.) William P. O'Brien,
instructions to the force.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/062e9236/attachment.html

From dgrant at accuratetechnologies.com  Tue Nov 21 07:37:31 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 21 Nov 2006 10:37:31 -0500
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>

 

 

  _____  

From: Oded Arbel [mailto:oded at atelis.net] 
Sent: Tuesday, November 21, 2006 10:24 AM
To: vtigercrm-developers at lists.vtigercrm.com
Subject: [Vtigercrm-developers] Question about the inventory mechanism

 


Hi all.

I'm evaluating vTiger CRM for my company, and there are several issues
where either I don't understand how to do things using vTiger CRM or
vTiger CRM is missing important functionality (important to my company ,
anyway ;-).

We wrote a back-end process to update the CRM with information out of
our inventory system, including stock info, etc.

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/d414d269/attachment.htm

From oded at atelis.net  Tue Nov 21 07:52:42 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 17:52:42 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
Message-ID: <1164124362.13078.61.camel@x-23.atelis.net>

On Tue, 2006-11-21 at 10:37 -0500, Dennis Grant wrote:
> 
> We wrote a back-end process to update the CRM with information out of
> our inventory system, including stock info, etc.


But how did you solve the serial number issue with the CRM inventory
mechanism ? 
I can probably sync our local inventory system to vTiger CRM, but if the
vTiger CRM inventory reports will not be useful, and its not easy to use
the inventory information in other entities (such as sales and
invoices), then its kind of useless to me - we can just as easily
continue to use our inventory system w/o integration and scribble serial
numbers by hand on the invoices.

--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
You know what I did before I married?
Anything I wanted to.
    -- Henny Youngman

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/d95f406f/attachment.html

From dgrant at accuratetechnologies.com  Tue Nov 21 08:01:17 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 21 Nov 2006 11:01:17 -0500
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>

 

 


But how did you solve the serial number issue with the CRM inventory
mechanism ? 

 

We didn't - no need, as we don't track serial numbers like you do.

 

But the concept of coding back-end connectors to do your data entry is
valid.

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/5e68f763/attachment.htm

From oded at atelis.net  Tue Nov 21 08:24:45 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 18:24:45 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>
Message-ID: <1164126285.13078.65.camel@x-23.atelis.net>

On Tue, 2006-11-21 at 11:01 -0500, Dennis Grant wrote:
>  
> 
>  
> 
> 
> But how did you solve the serial number issue with the CRM inventory
> mechanism ? 
> 
>  
> 
> We didn?t ? no need, as we don?t track serial numbers like you do.
> 
>  
> 
> But the concept of coding back-end connectors to do your data entry is
> valid.


It is, and I will do that if I can figure out a way to map the entities
I need to what the CRM provides.


--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
In an essay about programming, Ellen Ullman tells a great anecdote about
a programmer who was so socially inept that they could only communicate
with him via email, even they all shared the same office. She also
writes: "Pretty graphical interfaces are commonly called user-friendly.
But they are not really your friends. Underlying every user-friendly
interface is terrific contempt for the humans who will use it. ...to
build a crash-proof system, the designer must be able to imagine--and
disallow--the dumbest action possible. He or she has to think of every
single stupid thing a human being could do. Gradually, over months and
years, the designer's mind creates a construct of the user as an
imbecile. This image is necessary. No crash-proof system can be built
unless it is made for an idiot." 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/a90fbeab/attachment.html

From dan.means at teamsrs.com  Tue Nov 21 08:26:57 2006
From: dan.means at teamsrs.com (Dan Means)
Date: Tue, 21 Nov 2006 08:26:57 -0800
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <1164124362.13078.61.camel@x-23.atelis.net>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
	<1164124362.13078.61.camel@x-23.atelis.net>
Message-ID: <456328D1.9070002@teamsrs.com>

An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/2d9213c2/attachment.htm

From g.un at freemail.hu  Tue Nov 21 12:15:43 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 21:15:43 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164120984.10220.52.camel@joesunix.int>
Message-ID: <freemail.20061021211543.19078@fm08.freemail.hu>


> > Actually it is enough if you issue this query in mysql. I
> > have used this query in mysql and it always assigns a unique
> > value there.
> 
> Yes, this is because the field is defined as an
auto-increment. The
> problem is that this procedure does NOT update the value in
> vtiger_field_seq so any new module or maybe some patches
are going to
> get into trouble with overwritten field values. It's OK if
your sure you
> are never going to add anything somebody else has done.
> 
> The correct way to do this is launch the SQL insert and
then modify the
> value in vtiger_field_seq accordingly.
So, for what purpose this vtiger_field table is there? I
have a custom field in contacts (besides my problem
described earlier) and this vtiger_field table is really empty

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm




From g.un at freemail.hu  Tue Nov 21 12:15:43 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 21:15:43 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164120984.10220.52.camel@joesunix.int>
Message-ID: <freemail.20061021211543.19078@fm08.freemail.hu>


> > Actually it is enough if you issue this query in mysql. I
> > have used this query in mysql and it always assigns a unique
> > value there.
> 
> Yes, this is because the field is defined as an
auto-increment. The
> problem is that this procedure does NOT update the value in
> vtiger_field_seq so any new module or maybe some patches
are going to
> get into trouble with overwritten field values. It's OK if
your sure you
> are never going to add anything somebody else has done.
> 
> The correct way to do this is launch the SQL insert and
then modify the
> value in vtiger_field_seq accordingly.
So, for what purpose this vtiger_field table is there? I
have a custom field in contacts (besides my problem
described earlier) and this vtiger_field table is really empty

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm




From philip at vtiger.com  Fri Nov 24 00:04:46 2006
From: philip at vtiger.com (Philip)
Date: Fri, 24 Nov 2006 13:34:46 +0530
Subject: [Vtigercrm-developers] Status update on vtiger CRM 5.0.3
Message-ID: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>

Team,

Iam very happy to inform you all we have crossed half way mark inversion 5.0.3 development.  As of today we have fixed about 60+issues and updated the bleeding-edge demo @ 

http://en.vtiger.com/wip/index.php

Trac status:

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/query?status=closed&group=owner&milestone=5.0.3&order=priority.


Based on the community feedback on quality of the product we areplanning to update the trac status on daily basis so that we canindentify any issues well in advance and avoid last minute glitches.This will also help us making the release hassle free.

We are looking forward for your help in validating the clossed issues.If there are any breakages kindly drop a mail to philip at vtiger.com sothat i can update the ticket status in trac. 

Regards,
Philip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061124/8c8a53f2/attachment.html

From jens at Strawberry.COM  Fri Nov 24 00:38:55 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Fri, 24 Nov 2006 09:38:55 +0100
Subject: [Vtigercrm-developers] Status update on vtiger CRM 5.0.3
In-Reply-To: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>;
	from Philip on Fri, Nov 24, 2006 at 01:34:46PM +0530
References: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>
Message-ID: <20061124093855.B779@Strawberry.COM>


Hi,


PostgreSQL support is still not complete in vtigercrm release 5.0.2.
I've already sent an patch to you when 5.0 was released, but you
said to incorporate this into 5.0.1 ...

In 5.1_jens the PostgreSQL support is fine. 5.1_jens is based on 5.0.2.
I may extract the PostgreSQL related diffs between 5.0.2 and 5.1_jens and
hand them over to you as a patch until sunday ...
Should I? 


Kind regards,
Jens
On Fri, Nov 24, 2006 at 01:34:46PM +0530, Philip wrote:
> Team,
> 
> Iam very happy to inform you all we have crossed half way mark inversion 5.0.3 development.  As of today we have fixed about 60+issues and updated the bleeding-edge demo @ 
> 
> http://en.vtiger.com/wip/index.php
> 
> Trac status:
> 
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/query?status=closed&group=owner&milestone=5.0.3&order=priority.
> 
> 
> Based on the community feedback on quality of the product we areplanning to update the trac status on daily basis so that we canindentify any issues well in advance and avoid last minute glitches.This will also help us making the release hassle free.
> 
> We are looking forward for your help in validating the clossed issues.If there are any breakages kindly drop a mail to philip at vtiger.com sothat i can update the ticket status in trac. 
> 
> Regards,
> Philip

> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      


From gregory.machin at gmail.com  Wed Nov 29 04:32:54 2006
From: gregory.machin at gmail.com (Gregory Machin)
Date: Wed, 29 Nov 2006 14:32:54 +0200
Subject: [Vtigercrm-developers] vtigercrm nubee
Message-ID: <30200a940611290432s3c146c22h2deecc7b74021ad3@mail.gmail.com>

Hi All.
I'm trying to install my, vtiger 5.0.2 from the tgz file..
and I get the following on the finish step ....

Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to
allocate 64 bytes) in
/var/www/html/vtigercrm/adodb/adodb-xmlschema.inc.php on line 1656

Im using Fedora Core 6 64_bit
AMD Turion 64 3Hz
1Gig Ram
apache 2.2.3
php 5.1.6

php.ini ...
<snip>
max_execution_time = 300     ; Maximum execution time of each script, in second
max_input_time = 60     ; Maximum amount of time each script may spend parsing
memory_limit = 512M      ; Maximum amount of memory a script may consume
</snip>

I started out memory_limit = 32M then 64M then 128M then got peeved
and set it to 512M
and still the same error..

I have played with all the setting I know and have used to resolve,
similar problems before ..
I'm stumped ...

please help

Many thanks


-- 
Gregory Machin
gregory.machin at gmail.com
www.linuxpro.co.za

From nithya at vtiger.com  Thu Nov  2 01:27:08 2006
From: nithya at vtiger.com (Nithya)
Date: Wed, 01 Nov 2006 22:27:08 -0800
Subject: [Vtigercrm-developers] Forum Moderation
Message-ID: <10ea7597a25.-7019041752458725766.5893219660014322383@@vtiger.com>

Hi Ken,

Thank you for your mail and valuable input.

We have been off late taking the operation of moving some of  our posts(issues) from forums to bugtrac as far as possible so that it is ticketed for developers' attention as soon as possible. Once we move it there, we lock these posts, so that the status of the issue can be seen in the trac itself. 

We have successfully completed moving all code contributions  and most of the other posts into HOw to's section of our WiKi Documentation  and locked it in forums.We are trying to maintain only general discussions in the main forums so that the forums are not flooded ,making our job simpler.

To lock a forum post, it can be done only by those with moderator priviliges.However, we will try and put a message as the last post , as you have rightly suggested.

And terribly sorry for the spam posts which you have had to cut off. We are trying desperately to do away with these unwarranted posts!

Please keep in touch with us.

Best Regards
Nithya

_______________________________________________________________________________________

Subject: 
[Vtigercrm-developers] Forum Moderation 
From: 
Ken Lyle <kenlyle at yahoo.com> 
Date: 
Mon, 30 Oct 2006 11:08:14 -0800 (PST) 
To: 
vTiger List <vtigercrm-developers at lists.vtigercrm.com> 

I've been moderating a bit, mainly deleting "girlie"
and "pharma" posts...I have seen a couple of minor
gripes about threads being locked.  I wonder whether
the board can be enhanced to show other moderators who
locked the thread, when and why?

Is it possible that threads can get locked by
accident?

Is this one locked, for example, because it's
superseded by another:
http://forums.vtiger.com/viewtopic.php?t=8932&postdays=0&postorder=asc&highlight=email&start=10

If so, it would be good to put a redirect message as
the last post before the thread is locked.

Just trying to get procedures down...

Thanks,
Ken

484-948-5706
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061101/c9ae9beb/attachment-0001.html 

From fp at crm-now.de  Fri Nov  3 05:32:15 2006
From: fp at crm-now.de (Frank Piepiorra)
Date: Fri, 3 Nov 2006 11:32:15 +0100
Subject: [Vtigercrm-developers] Bugtracker needs configuration
In-Reply-To: <mailman.642.1161957249.4976.vtigercrm-developers@lists.vtigercrm.com>
Message-ID: <200611031027.kA3ARZD8005280@doko.im-netz.de>

If you use the bugtracker to report bugs you can choose 4.2 or 5.0.0 but not
5.0.1 or 5.0.2 as the vtiger version. Please add the new version so that
bugs can be assigned to the proper version.

Regards,



From allan.bush+vtiger_dev at gmail.com  Fri Nov  3 11:29:58 2006
From: allan.bush+vtiger_dev at gmail.com (Allan Bush)
Date: Fri, 3 Nov 2006 08:29:58 -0800
Subject: [Vtigercrm-developers] Bugtracker needs configuration
In-Reply-To: <200611031027.kA3ARZD8005280@doko.im-netz.de>
References: <mailman.642.1161957249.4976.vtigercrm-developers@lists.vtigercrm.com>
	<200611031027.kA3ARZD8005280@doko.im-netz.de>
Message-ID: <3bec26390611030829t48726a12qe6f032776ab16bdd@mail.gmail.com>

Thanks for the heads up.

The version/milestone options should be up to date now.  I'd be temped
to remove 5.0.0 and 5.0.1 as version options when creating new tickets
(as the issue may have been fixed with 5.0.2) but I'll leave that up
to the people working on 5.x.

On 11/3/06, Frank Piepiorra <fp at crm-now.de> wrote:
> If you use the bugtracker to report bugs you can choose 4.2 or 5.0.0 but not
> 5.0.1 or 5.0.2 as the vtiger version. Please add the new version so that
> bugs can be assigned to the proper version.
>
> Regards,
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com
>


From joe at tsolucio.com  Fri Nov  3 12:31:15 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Fri, 03 Nov 2006 18:31:15 +0100
Subject: [Vtigercrm-developers] new vtiger_entityname table
Message-ID: <1162575075.11542.23.camel@joesunix.int>

Hi,

What is the new vtiger_entityname table for?
Do we have to add entries to this table for our own modules (timecards,
projects,...)?
Do we have to update the wiki with this info?

Thanks, Joe
TSolucio



From dimitar.peev at gmail.com  Sat Nov  4 05:37:23 2006
From: dimitar.peev at gmail.com (Dimitar Peev)
Date: Sat, 4 Nov 2006 12:37:23 +0200
Subject: [Vtigercrm-developers] no authentication on soap
Message-ID: <3b0e87e10611040237s34d73f8cxdb40a94ceace157a@mail.gmail.com>

I see that it is possible to flood every installation of vtiger with
leads and contacts through the soap RPC, am I right? There is no
password whatsoever.


From kenlyle at yahoo.com  Sun Nov  5 09:45:59 2006
From: kenlyle at yahoo.com (Ken Lyle)
Date: Sun, 5 Nov 2006 06:45:59 -0800 (PST)
Subject: [Vtigercrm-developers] MySQL Migration Tool
Message-ID: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>

I just discovered on my computer the MySQL Migration
Tool, 1.1.4 rc.

This looks like a framework for doing database
transforms, like vTiger 4.2.3 to 5, or Sugar 4.x to
4.2.3 or 5.

This might be a more supportable way to deliver the
data migrations we need.

Ken

484-948-5706
866-OUT OF BOX
(866-688-6326)

-- 
"He who reads nothing is more educated than he who reads nothing but newspapers."  - Thomas Jefferson


From Dirk.Gorny at genion.de  Sun Nov  5 10:04:25 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Sun, 5 Nov 2006 16:04:25 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
Message-ID: <200611051604.25302.Dirk.Gorny@genion.de>

Am Sonntag, 5. November 2006 15:45 schrieb Ken Lyle:
> I just discovered on my computer the MySQL Migration
> Tool, 1.1.4 rc.

Why another tool? The more code, the more errors. The basic thing is to put 
one database struktur to annother. Our ancestry therfor developed SQL. Long 
time ago with applications which where more complex in database structure all 
things were done in SQL. This prevents of running out of memory or on 
timeouts by the *.php or whatever you use. And, the great benefit; you will 
get meaningful error messages which are not dumped by the overlying script.
So my recommendation:
Pure SQJ, as few as possible Loops and complex strukture.
Not referencing by attribute order. Ever referencing by attribute.
I know it is a boring idea, but for me it worked the last 20 Jears.

Best regards,

Dirk


From remco at artoge.nl  Sun Nov  5 10:24:38 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Sun, 5 Nov 2006 16:24:38 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <200611051604.25302.Dirk.Gorny@genion.de>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
Message-ID: <4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>

Hi all,

Well I agree partly, as MYSQL isn't the only database in place! As  
their are some who work with postgrssql instead, not to mention the  
possibility for Oracle or anything else.
If it's a tool to be used by many other sql databases fine, but as  
far as I know it's not.

Refering to Dirk question why another tool, I've been developing with  
another tool: see www.radicore.org because I prefer a even stronger  
splitup: in using 3-tier design architecture.
Although until now it's only been for customisation of VtigerCRM, I  
would love to see the base of 3-tier which is allready within  
VtigerCRM taken a few steps futher.

Ton introduce it futher with a
[quote from radicore website:]
3-Tier Architecture

An architectural pattern of software development in which the  
application logic is separated into different tiers or layers:

The Presentation Layer or User Interface, which all handles all  
communication with the user.
The Business Layer, which has a separate object for each business  
entity.
The Data Access Layer which communicates with the database.
This allows individual layers to be enhanced, or even replaced, with  
minimal impact on the other layers. For example it should be possible  
to change nothing but the contents of the presentation layer in order  
to switch from XHTML output to PDF output, or to change nothing but  
the contents of the data access layer in order to switch from one  
database engine to another.

[end quote]

Best regards, Remco




Op 5-nov-2006, om 16:04 heeft Dirk Gorny het volgende geschreven:

> Am Sonntag, 5. November 2006 15:45 schrieb Ken Lyle:
>> I just discovered on my computer the MySQL Migration
>> Tool, 1.1.4 rc.
>
> Why another tool? The more code, the more errors. The basic thing  
> is to put
> one database struktur to annother. Our ancestry therfor developed  
> SQL. Long
> time ago with applications which where more complex in database  
> structure all
> things were done in SQL. This prevents of running out of memory or on
> timeouts by the *.php or whatever you use. And, the great benefit;  
> you will
> get meaningful error messages which are not dumped by the overlying  
> script.
> So my recommendation:
> Pure SQJ, as few as possible Loops and complex strukture.
> Not referencing by attribute order. Ever referencing by attribute.
> I know it is a boring idea, but for me it worked the last 20 Jears.
>
> Best regards,
>
> Dirk
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061105/4d7844fb/attachment-0001.html 

From acc at anthonychavez.org  Sun Nov  5 16:42:43 2006
From: acc at anthonychavez.org (Anthony Chavez)
Date: Sun, 05 Nov 2006 14:42:43 -0700
Subject: [Vtigercrm-developers] Customer portal sending wrong URL
Message-ID: <87mz75d0z0.fsf@hephaistos.aegaeum.anthonychavez.org>

vtigercrm-developers:

It would appear that version 5.0.0 of the Customer Portal (on FreeBSD
6.1-RELEASE-p3, Apache 2.2.3, and PHP 5.1.6) is not sending the
correct URL in emails.  Here is an example, which results in 404:

https://mydomain.com/vtiger/customerportal/general.php?action=UserTickets&ticketid=236&fun=detail

general.php does not exist anywhere in my vtiger tree.  Did I neglect
to install it, or has it been removed since version 4.x?

Thanks.

-- 
Anthony Chavez                                 http://anthonychavez.org/
mailto:acc at anthonychavez.org         jabber:acc at jabber.anthonychavez.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 480 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061105/b6da2111/attachment.bin 

From Dirk.Gorny at genion.de  Mon Nov  6 02:22:15 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Mon, 6 Nov 2006 08:22:15 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
Message-ID: <200611060822.15947.Dirk.Gorny@genion.de>

Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:

> Refering to Dirk question why another tool, I've been developing with
> another tool: see www.radicore.org because I prefer a even stronger
> splitup: in using 3-tier design architecture.
> Although until now it's only been for customisation of VtigerCRM, I
> would love to see the base of 3-tier which is allready within
> VtigerCRM taken a few steps futher.

Hello Remco,

Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier architecture not 
the same thing than putting a new 300HP engine in an old Volkswagen Beetle?
There are better things to deal with a 3-tier architecture.
For exaple using a application server like Jboss and you get rid of much 
security issuees by having all those connectors and process encapsulation 
allready there.
I had worked a little with openCRX (http://www.opencrx.org/) wich has to my 
mind the best architecture (MDA) but must become user-friendly which 
vtigercrm is. In my opinion vtigercrm has to do a stronger encapsulating of 
the modules and building a crm-core as an interface for the Modules. But I am 
not shure if this is actually possible with php. At the end you have another 
application server.

Best regards,

Dirk


From remco at artoge.nl  Mon Nov  6 02:42:40 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 6 Nov 2006 08:42:40 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <200611060822.15947.Dirk.Gorny@genion.de>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
	<200611060822.15947.Dirk.Gorny@genion.de>
Message-ID: <07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>

Hi Dirk,


Well to use your metafor:
If you would use php 3 it would be: an old beetle with a new engine.
But as we're using php 5 it's the new beetle with a new engine.
Indeed it's possible but not easy to build, and I agree again partly:
As I'm using a hosted service for vtigercrm: it's only used for crm,  
in that way it's in my mind all ready an application server.
I will have to look into openCRX before I respond to the rest aswell.

Best regards and learning :-)

Remco



Op 6-nov-2006, om 8:22 heeft Dirk Gorny het volgende geschreven:

> Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:
>> Refering to Dirk question why another tool, I've been developing with
>> another tool: see www.radicore.org because I prefer a even stronger
>> splitup: in using 3-tier design architecture.
>> Although until now it's only been for customisation of VtigerCRM, I
>> would love to see the base of 3-tier which is allready within
>> VtigerCRM taken a few steps futher.
>
> Hello Remco,
>
> Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier  
> architecture not
> the same thing than putting a new 300HP engine in an old Volkswagen  
> Beetle?
> There are better things to deal with a 3-tier architecture.
> For exaple using a application server like Jboss and you get rid of  
> much
> security issuees by having all those connectors and process  
> encapsulation
> allready there.
> I had worked a little with openCRX (http://www.opencrx.org/) wich  
> has to my
> mind the best architecture (MDA) but must become user-friendly which
> vtigercrm is. In my opinion vtigercrm has to do a stronger  
> encapsulating of
> the modules and building a crm-core as an interface for the  
> Modules. But I am
> not shure if this is actually possible with php. At the end you  
> have another
> application server.
>
> Best regards,
>
> Dirk
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com



From lists.vtigercrm.com at callum-macdonald.com  Mon Nov  6 07:19:12 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Mon, 06 Nov 2006 19:19:12 +0700
Subject: [Vtigercrm-developers] Field cascade from Account to Contact
Message-ID: <454F2840.6030907@callum-macdonald.com>

Hey Guys,

Does anyone know if it's possible to have Account Type available as a 
field in a contact's record? So you could filter contacts according to 
Account Type, etc. If not, any suggestions on how we'd best achieve 
this? I can see a couple of options...

1) Create a custom field in Contacts and hack vtiger to automatically 
update the field every time an account field is changed. Potentially nasty.

2) Hack the sql to join the field in and add it to the result set. Again 
potentially nasty.

Suggestions most welcome on a postcard... :)

Cheers,


Callum.



From remco at artoge.nl  Mon Nov  6 11:57:02 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 6 Nov 2006 17:57:02 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
	<200611060822.15947.Dirk.Gorny@genion.de>
	<07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
Message-ID: <F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>

Well,

Reading a bit more:
http://www-128.ibm.com/developerworks/rational/library/may05/brown/ 
index.html

It makes sence: radicore.org is a usefull part for an MDA approche.  
Read for example, in the above url: Using MDA to customize a solution  
framework

And yes with a stronger encapsulating of the modules and building a  
crm-core as an interface for the Modules.
You can have another application server with php.

But I must state aswell that I do hope to see that's we'll still  
provide php only as wamp/lamp solution.
As said before, that's all I need :-)
If all this could help to improve the product let's then use it.


@Dirk, could you give us your idea's on more specific improvements,  
compared with openCRX?



Best regards,

Remco




Op 6-nov-2006, om 8:42 heeft Dhr. R.R. Gerbrands het volgende  
geschreven:

> Hi Dirk,
>
>
> Well to use your metafor:
> If you would use php 3 it would be: an old beetle with a new engine.
> But as we're using php 5 it's the new beetle with a new engine.
> Indeed it's possible but not easy to build, and I agree again partly:
> As I'm using a hosted service for vtigercrm: it's only used for crm,
> in that way it's in my mind all ready an application server.
> I will have to look into openCRX before I respond to the rest aswell.
>
> Best regards and learning :-)
>
> Remco
>
>
>
> Op 6-nov-2006, om 8:22 heeft Dirk Gorny het volgende geschreven:
>
>> Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:
>>> Refering to Dirk question why another tool, I've been developing  
>>> with
>>> another tool: see www.radicore.org because I prefer a even stronger
>>> splitup: in using 3-tier design architecture.
>>> Although until now it's only been for customisation of VtigerCRM, I
>>> would love to see the base of 3-tier which is allready within
>>> VtigerCRM taken a few steps futher.
>>
>> Hello Remco,
>>
>> Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier
>> architecture not
>> the same thing than putting a new 300HP engine in an old Volkswagen
>> Beetle?
>> There are better things to deal with a 3-tier architecture.
>> For exaple using a application server like Jboss and you get rid of
>> much
>> security issuees by having all those connectors and process
>> encapsulation
>> allready there.
>> I had worked a little with openCRX (http://www.opencrx.org/) wich
>> has to my
>> mind the best architecture (MDA) but must become user-friendly which
>> vtigercrm is. In my opinion vtigercrm has to do a stronger
>> encapsulating of
>> the modules and building a crm-core as an interface for the
>> Modules. But I am
>> not shure if this is actually possible with php. At the end you
>> have another
>> application server.
>>
>> Best regards,
>>
>> Dirk
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061106/d2e0f462/attachment-0001.html 

From joel.rydbeck at nubrek.com  Tue Nov  7 00:08:12 2006
From: joel.rydbeck at nubrek.com (Joel Rydbeck)
Date: Mon, 6 Nov 2006 23:08:12 -0600
Subject: [Vtigercrm-developers] 4.2 development
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com><200611051604.25302.Dirk.Gorny@genion.de><4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl><200611060822.15947.Dirk.Gorny@genion.de><07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
Message-ID: <64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>

Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
 
- Joel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 3212 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061106/2b038104/attachment-0002.bin 

From nolan at peaceworks.ca  Tue Nov  7 00:19:27 2006
From: nolan at peaceworks.ca (Nolan Andres)
Date: Tue, 07 Nov 2006 00:19:27 -0500
Subject: [Vtigercrm-developers] 4.2 development
In-Reply-To: <64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com><200611051604.25302.Dirk.Gorny@genion.de><4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl><200611060822.15947.Dirk.Gorny@genion.de><07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
	<64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>
Message-ID: <4550175F.30105@peaceworks.ca>

I'm interested, but can't be counted on for a lot of contributions. I'd 
be willing to take on issue 1507 (partial matches in searches), though, 
if that would be useful.

peace,
Nokes

Joel Rydbeck wrote:
> Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
>  
> - Joel
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


From grahama at add-ons.co.uk  Tue Nov  7 02:58:35 2006
From: grahama at add-ons.co.uk (grahama at add-ons.co.uk)
Date: Tue, 7 Nov 2006 07:58:35 +0000 (GMT)
Subject: [Vtigercrm-developers] 4.2 development
Message-ID: <865798.1162886315797.JavaMail.wibapp@vuk1120.visto-mgmt.com>

Joel

We are still on 4.x and because of the many custom requirements we have, we will remain for sometime.

We are also using mysql, would you say that a move to postgres would be beneficial ? What benefits have you seen?

Many thanks....any comments welcome.

Graham 

-----Original Message-----
From: "Joel Rydbeck" <joel.rydbeck at nubrek.com>
To: "vtigercrm-developers at lists.vtigercrm.com" <vtigercrm-developers at lists.vtigercrm.com>
Sent: 07/11/06 05:07
Subject: 4.2 development

Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
 
- Joel



From dgrant at accuratetechnologies.com  Tue Nov  7 12:02:45 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 7 Nov 2006 12:02:45 -0500
Subject: [Vtigercrm-developers] profileGlobalPermission
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4D88@exch.accuratetechnologies.com>

OK gang, I've been beating my head against this for a while and I'm
starting to get frustrated.

 

Here is the issue: 

 

1)         in the ListView for TroubleTickets, some users can see
TicketID and some cannot (the requirement is that all users can see
them)

 

2)         There is no place in the field permissions editor for Ticket
ID (or crmid, for that matter)

 

3)         Certain profiles CAN see TicketID; some cannot.

 

4)         The difference between those profiles that can see ticketID
is that they have $profileGlobalPermission[1] set to 0, where those that
cannot see TicketID have $profileGlobalPermission[1] set to 1;

 

5)         I think I've found where in the code the test is made - if
you have $is_admin true OR $profileGlobalPermission[1]==0, then you get
the full field list for that module/tab. Otherwise, there's a
complicated query that pulls down allowed fields.

 

6)         I have not (yet) found where $profileGlobalPermission[1] is
set

 

7)         I have not (yet) found how to add TicketID to a list of
permissions where $profileGlobalPermission[1] == 0;

 

I think being able to do #7 - and being to do it via the security
interface - is the ultimate goal here.

 

Can somebody PLEASE explain how this all interacts, before I go crazy?

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061107/980beb25/attachment-0001.html 

From joe at tsolucio.com  Tue Nov  7 15:59:04 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 07 Nov 2006 21:59:04 +0100
Subject: [Vtigercrm-developers]  profileGlobalPermissions
Message-ID: <1162933144.8036.11.camel@joeshome.int>

Hi Dennis,

I have seen that the $profileGlobalPermissions array is set in the users
corresponding user_privileges_id.php file (in the corresponding
directory). This file is created in the CreateUserPrivilegeFile function
in a script of the same name in modules/Users directory. I don't know
when the function is called but I suppose that it is when you create a
user.

This function calls getCombinedUserGlobalPermission and this one calls
getProfileGlobalPermission which accesses the table
vtiger_profile2globalpermissions where the profiles Global Access
Privileges are assigned.

So I think that those profiles that are working must have the Global
Privileges set to ALL and the others don't.

I suppose that if you change the values in the database, which is
equivalent to changing the profiles value you may get VT working in a
way that you don't want. I think you will have to look at another way of
adding the ticketid to the view. Probably playing with the SQL command.

What I did was create my own ticketid field which autoincrements with
code based on that available in the forums (I can send you my version if
you want) and I use this field instead of VT's ticketid.

Sorry I couldn't be of more help.

Regards, Joe
TSolucio



From dfar2008 at gmail.com  Tue Nov  7 23:27:26 2006
From: dfar2008 at gmail.com (ding jianting)
Date: Wed, 8 Nov 2006 12:27:26 +0800
Subject: [Vtigercrm-developers] dashboard bug
Message-ID: <fb148e2a0611072027v4c54a095q575306bf3c23bc89@mail.gmail.com>

Hi,all
I found error msg "No data available with the specified time period"  in
Dashboard module. I cracked code and found $this->module_id,module_name are
invoked by process_full_list_query function of CRMEntity Bean. But there are
no module_id,module_name fields in Potentails bean. Two fields exists in
5.0.1. So I added module_id,module_name field in Potentials.php.
Dashboard module works properly again.

another bug about report module:
AdvancedFilter.php getSecondaryColumns_AdvFilterHTML function:
from:
if(isset($mod_strings[$fieldlable]))
to:
if(isset($mod_strings[$fieldlabel]))

If any problem, pls let me know.

Thanks and regards

-- 
DingJianting
________________________________________
????????????: http://www.c3crm.com
-----------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061108/2bd6b40e/attachment-0001.html 

From lists.vtigercrm.com at callum-macdonald.com  Tue Nov  7 23:46:31 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Wed, 08 Nov 2006 11:46:31 +0700
Subject: [Vtigercrm-developers] Release naming
Message-ID: <45516127.4030306@callum-macdonald.com>

Hi Guys,

I think the naming of releases should be simplified. I suggest Joomla 
provides a good template to use (with one or two improvements):
http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11

vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
from what version you can apply patch 2, and so on. I suggest we use the 
same method as Joomla. When a new version is released (5.0.2) then the 
following files are released:
vtigercrm-5.0.0-to-5.0.2-patch.zip
vtigercrm-5.0.1-to-5.0.2-patch.zip
vtigercrm-5.0.2-full-windows.exe
vtigercrm-5.0.2-full-linux.bin
vtigercrm-5.0.2-full-lamp.tgz

<http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
think it's important to include the windows/linux/lamp in the file name. 
I know it's obvious from the extension to MOST people, but not to everyone.

I also think these files should all be released in the same package in 
sourceforge. In my opinion, splitting the full and patch releases is 
confusing.

I think this is a HUGELY important issue, as important as the recent 
heated debate over the naming of the GA release.

Comments on a postcard...


Callum.


From ncknight at pacific.net.sg  Wed Nov  8 00:41:07 2006
From: ncknight at pacific.net.sg (Nicholas Chan)
Date: Wed, 08 Nov 2006 13:41:07 +0800
Subject: [Vtigercrm-developers] Release naming
In-Reply-To: <45516127.4030306@callum-macdonald.com>
References: <45516127.4030306@callum-macdonald.com>
Message-ID: <45516DF3.20809@pacific.net.sg>

I just found it odd that the naming issue is still being discussed till
today. Why isn't the standard set and enforced already?

Callum Macdonald wrote:
> Hi Guys,
>
> I think the naming of releases should be simplified. I suggest Joomla 
> provides a good template to use (with one or two improvements):
> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11
>
> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
> from what version you can apply patch 2, and so on. I suggest we use the 
> same method as Joomla. When a new version is released (5.0.2) then the 
> following files are released:
> vtigercrm-5.0.0-to-5.0.2-patch.zip
> vtigercrm-5.0.1-to-5.0.2-patch.zip
> vtigercrm-5.0.2-full-windows.exe
> vtigercrm-5.0.2-full-linux.bin
> vtigercrm-5.0.2-full-lamp.tgz
>
> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
> think it's important to include the windows/linux/lamp in the file name. 
> I know it's obvious from the extension to MOST people, but not to everyone.
>
> I also think these files should all be released in the same package in 
> sourceforge. In my opinion, splitting the full and patch releases is 
> confusing.
>
> I think this is a HUGELY important issue, as important as the recent 
> heated debate over the naming of the GA release.
>
> Comments on a postcard...
>
>
> Callum.
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
>   



From jtk at yahoo.com  Wed Nov  8 01:38:26 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Wed, 08 Nov 2006 01:38:26 -0500
Subject: [Vtigercrm-developers] Release naming
References: <45516127.4030306@callum-macdonald.com>
Message-ID: <pan.2006.11.08.06.38.24.169176@yahoo.com>

Callum Macdonald wrote:
> I think the naming of releases should be simplified. vtiger 5 patch 2
> and vtiger 5.0.2 are confusing names. It is not clear from what version
> you can apply patch 2, and so on. I suggest we use the same method as
> Joomla. When a new version is released (5.0.2) then the following files
> are released:
>
> I also think these files should all be released in the same package in
> sourceforge. In my opinion, splitting the full and patch releases is
> confusing.

Just an opinion, but I don't think vtigercrm should concern itself with
(or release) anything except pure-source, verbatim-to-the-svn-tag tar.gz
and .zip releases.

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseNaming
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseProcedure

Binary installers, patch-overlay releases, these are all the things
that third-party packagers do according to their own standards. We don't
want those problems. Packagers have the expertise and the ultimate
responsibility to do final-installation correctly for their security
strategy. What they need from the vtigercrm team is a rock-solid tarball
with a predictable layout, at a predictable unique URL, happening the same
way with every major, minor and bugfix release.

vtigercrm releases should be tailored for a primary consumer audience of
system packagers, and a secondary audience of expert manual install
aficionados who are willing to obsessively merge the unpacked source tree
to their own customized installation, and additionally set file
permissions, etc, according to a well-documented INSTALL.txt.



From remco at artoge.nl  Wed Nov  8 06:30:17 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Wed, 8 Nov 2006 12:30:17 +0100
Subject: [Vtigercrm-developers] Release naming
In-Reply-To: <45516DF3.20809@pacific.net.sg>
References: <45516127.4030306@callum-macdonald.com>
	<45516DF3.20809@pacific.net.sg>
Message-ID: <B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>

@ Nicholas,

If you find it odd, you might want to wait using vtigercrm as we're  
in the process of becoming mature.

@ Callum,

What you are refering to is not release naming to my idea.
But package naming.
I think that's a bit confusing for more people,
The release naming is still the same, in you example 5.0.2,
depending on the target platform is you're suggested packet naming.

I can agree with it, yet as our user are no newbee's the naming as  
stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
ReleaseNaming
is enough, I would suggest adding a wiki page for the newbee's who  
doesn't know what to download instead.

Best regards,

Remco




Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:

> I just found it odd that the naming issue is still being discussed  
> till
> today. Why isn't the standard set and enforced already?
>
> Callum Macdonald wrote:
>> Hi Guys,
>>
>> I think the naming of releases should be simplified. I suggest Joomla
>> provides a good template to use (with one or two improvements):
>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/ 
>> frs.joomla_1_0.1_0_11
>>
>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not  
>> clear
>> from what version you can apply patch 2, and so on. I suggest we  
>> use the
>> same method as Joomla. When a new version is released (5.0.2) then  
>> the
>> following files are released:
>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>> vtigercrm-5.0.2-full-windows.exe
>> vtigercrm-5.0.2-full-linux.bin
>> vtigercrm-5.0.2-full-lamp.tgz
>>
>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0- 
>> patch2.zip?download>I
>> think it's important to include the windows/linux/lamp in the file  
>> name.
>> I know it's obvious from the extension to MOST people, but not to  
>> everyone.
>>
>> I also think these files should all be released in the same  
>> package in
>> sourceforge. In my opinion, splitting the full and patch releases is
>> confusing.
>>
>> I think this is a HUGELY important issue, as important as the recent
>> heated debate over the naming of the GA release.
>>
>> Comments on a postcard...
>>
>>
>> Callum.
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>
>>
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061108/b9c3bc42/attachment-0001.html 

From joe at tsolucio.com  Wed Nov  8 18:50:30 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Thu, 09 Nov 2006 00:50:30 +0100
Subject: [Vtigercrm-developers] vtiger popup calendar start day of the week
Message-ID: <1163029830.28710.8.camel@joeshome.int>

Hi,

I tried to get the VT calendar start on monday instead of sunday. I
found the code very hard to follow and, to my surprise, there was no
variable whose value I could change to get the calendar start on monday.
As I did for the javascript calendar changing the variable firstDay.

I finaly add a bit of code to the modules/Calendar/Calendar.php

I changed line 111
   $num_of_prev_days = $firstday_of_month->dayofweek;

to
   $num_of_prev_days = ($firstday_of_month->dayofweek==0 ? 6 :
$firstday_of_month->dayofweek-1);

And the same for year. I changed line 127
  $noof_prevdays = $firstday_of_month->dayofweek;

to
  $noof_prevdays = ($firstday_of_month->dayofweek==0 ? 6 :
$firstday_of_month->dayofweek-1);

This seems to be working fine but I really don't know what I am doing.
 Does this break other things?
 Will I start getting activities and notifications on the wrong dates?
 Is there really no global variable I can change to get the calendar
start on monday?

Any comments would be greatly appreciated.

Thanks, Joe
TSolucio




From leandro at oriontek.org  Wed Nov  8 22:12:01 2006
From: leandro at oriontek.org (Leandro Rache Sanchez)
Date: Wed, 8 Nov 2006 22:12:01 -0500
Subject: [Vtigercrm-developers] vtiger 5.0.0 to vtiger 5.0.2
Message-ID: <200611082212.01724.leandro@oriontek.org>

Hi developers,
I tried to install vtiger 5.0.2 from SVN and this ok, but i need to update 
vtiger 5.0.0 to vtiger 5.0.2, some simply copy paste from SVN soesn't work, 
please help me with some script for this update.

Thanks, 
-- 

   ~     Leandro Rache Sanchez
 (. .)   leandro at oriontek.org
  \V/      
 //"\\   Corporacion Tecnol?gica ORION.
/( ' )\  info at oriontek.org
 ^*-*^   http://www.oriontek.org/orion/
---------------------------------------




From gopals at vtiger.com  Thu Nov  9 08:32:58 2006
From: gopals at vtiger.com (Gopal)
Date: Thu, 09 Nov 2006 19:02:58 +0530
Subject: [Vtigercrm-developers] Announcement: Richie's Europe Trip Schedule..
Message-ID: <45532E0A.4050709@vtiger.com>

Dear Team,

I am pleased to inform you all that Richie's Europe trip has been 
finalized.

He will be reaching *UK* before 11th Nov and start visiting our user 
community and partners from 12th of Nov. In UK he will stay for about 10 
days time. Based on the community needs he will extend his stay for 3 to 
4 days.

Next, he will be going to *Germany* or *France* for around 20 days stay 
where he will visit our community & business partners in various cities. 
In *France* he will be attending an Open Source Competition as a Jury 
member (Nov 30th and 31st).

http://www.tropheesdulibre.org/index.php?module=4&action=3

His stay in France for 10 to 15 days period in depending up on the 
community requirements. He will also visit other *Schengen* countries 
depending on the community demand.

*/I would like to request you all to let us know your convenient place & 
time to meet Richie. In each country he would like meet most of our 
community members.

/*Please drop a mail directly to *richie at vtiger.com* (and CC to 
gopals at vtiger.com) with the following information:

    * Place
    * Convenient Time
    * Address & Phone No

Looking forward for your kind cooperation for making vtiger's first trip 
to Europe a successful one!

Best Regards,
*Gopal
vtiger Team*
---
S.S.G.Gopal
+1 925 965 6387
Skype: sripadag
blog: http://blogs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061109/69cf1fb5/attachment-0001.html 

From kenlyle at yahoo.com  Thu Nov  9 10:15:20 2006
From: kenlyle at yahoo.com (Ken Lyle)
Date: Thu, 9 Nov 2006 07:15:20 -0800 (PST)
Subject: [Vtigercrm-developers] Being Good Tool Users
Message-ID: <20061109151520.49889.qmail@web37312.mail.mud.yahoo.com>

Community Engagement and Bug Fix Case Study:

http://forums.vtiger.com/viewtopic.php?t=10811

I submitted a simple one file patch on October 31.
That fix is stuck in the middle of the forum thread at
the bottom of page 3.

**Can I make a post within a thread Starred, Featured,
Sticky?  That would seem like a good thing in this
case.

***Some people have reported that it works, some
people have other issues.  It appears that we have NO
STRUCTURED mechanism for capturing the fact that there
is a candidate fix, and what versions and operating
systems on which the fix was successful or
unsuccessful.

Furthermore, we don't seem to have a way of tracking
the 'credibility' of each report.  Ideally, we could
score these like so:

Senior Users: 90% fix rate
Intermediate Users: 60% fix rate
Noob Users: 50% fix rate

>From this example, I would assume that the fix is
good, for the versions where the Senior Users report a
fix rate over 80%, and the rest is user error.

Back to the story....Today, 10 days later (Is that
good? It gives time to get feedback, but wastes time
of people who have a hard time finding the
fix)...Nithya moved this to TRAC,
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/ticket/2578
, and posted a link to the 
thread above, but it's not obvious that you have to go
to page 3 to find the patch.  There's no way in the
forum to filter just posts with attachments....see **

SO, I posted the patch to the TRAC ticket.  But not
everyone has access to TRAC, I think.  FURTHER, when I
go to the TRAC page,
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report ,
not logged in (public), I can't SEARCH

How can I determine whether the bug that I am
considering posting has already been posted?  Even if
I click Active Tickets, 
there is No Search.  I don't believe that everyone
knows about Ctrl+F (Firefox).

IF we had ***, either in PHPBB or TRAC, then we could
confidently LOCK the forum thread with a single
redirect to the TRAC ticket.

SO, here is an idea...

SEARCH in the Forums seems broken...why, when I search
for "Incoming Email" is the thread above 6th, behind
less relevant threads?

Assuming that THAT can be fixed...perhaps, when there
is a candidate fix for a bug, there should be a POLL
created that runs for a certain period...after which,
if more than X% report success, the thread is locked,
and  
a Starred, Featured, Sticky redirect to the TRAC
ticket placed atop the thread.  This would save
everyone time...

I am a Moderator, where is the ability to create a
Poll?  I would like to try this concept...

Second, maybe TRAC is a better place to collect
Operating System and version information for each bug
and candidate fix.  Who can add these 
fields?

This would also provide us usage data, right?  I know
Sugar has that thing that collects usage data, which I
would guess includes O/S, # of records,
etc.  If we know what configurations people are using,
we can better isolate bugs...In fact, I can't really
imagine trying to do it without that info.

How can we even set priorities without knowing, for
example, "There are 10 users with Bug #XXXX, but they
are all running Red Hat 7".  Then we can issue
a statement that Red Hat 7 is not an officially
supported platform, but Good Luck anyway....

I think it's important to realize that if we can save
120 people 30 seconds every day, we can get an extra
hour that can be 
used to improve vTiger.

I offer a challenge to all of you.....to select tools
and use them in a way that accurately reflects the
talent and intelligence of this group, because, right
now, it does not, IMNSHO (In My Not So Humble
Opinion).  

AND, of course, the Core Team should avoid shipping
critical modules in a broken state.

I want to help this effort, but become disheartened
when it looks like nobody is thinking systematically,
and there is no documentation sufficient
to guide a reasonably bright person in how to
contribute...I'll contribute some of that next, partly
based on feedback to this thread.

I've put hours into composing this, and would like to
see something come of it...

Thanks,
Ken

484-948-5706
866-OUT OF BOX
(866-688-6326)

-- 
"He who reads nothing is more educated than he who reads nothing but newspapers."  - Thomas Jefferson


From jens at Strawberry.COM  Thu Nov  9 14:43:48 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Thu, 9 Nov 2006 20:43:48 +0100
Subject: [Vtigercrm-developers] Announcement: Richie's Europe Trip
	Schedule..
In-Reply-To: <45532E0A.4050709@vtiger.com>;
	from Gopal on Thu, Nov 09, 2006 at 07:02:58PM +0530
References: <45532E0A.4050709@vtiger.com>
Message-ID: <20061109204348.A13058@Strawberry.COM>

Hi,

End of November/Beginnig of December would be fine for me all the
time. My location is Munich/Germany. I'd may pick up Richie at the
munich airport and arrange a hotel room for him here in my town.


My address is

    Strawberry EDV Systeme GmbH
    Jens Hamisch - CEO
    Am Flosskanal 9a
    D-82515 Wolfratshausen
    Tel.: +49 8171 41805-0


You may contact me or our my colleque Mrs. Westermann to clarify the
details.


Jens




On Thu, Nov 09, 2006 at 07:02:58PM +0530, Gopal wrote:
> Dear Team,
> 
> I am pleased to inform you all that Richie's Europe trip has been 
> finalized.
> 
> He will be reaching *UK* before 11th Nov and start visiting our user 
> community and partners from 12th of Nov. In UK he will stay for about 10 
> days time. Based on the community needs he will extend his stay for 3 to 
> 4 days.
> 
> Next, he will be going to *Germany* or *France* for around 20 days stay 
> where he will visit our community & business partners in various cities. 
> In *France* he will be attending an Open Source Competition as a Jury 
> member (Nov 30th and 31st).
> 
> http://www.tropheesdulibre.org/index.php?module=4&action=3
> 
> His stay in France for 10 to 15 days period in depending up on the 
> community requirements. He will also visit other *Schengen* countries 
> depending on the community demand.
> 
> */I would like to request you all to let us know your convenient place & 
> time to meet Richie. In each country he would like meet most of our 
> community members.
> 
> /*Please drop a mail directly to *richie at vtiger.com* (and CC to 
> gopals at vtiger.com) with the following information:
> 
>     * Place
>     * Convenient Time
>     * Address & Phone No
> 
> Looking forward for your kind cooperation for making vtiger's first trip 
> to Europe a successful one!
> 
> Best Regards,
> *Gopal
> vtiger Team*
> ---
> S.S.G.Gopal
> +1 925 965 6387
> Skype: sripadag
> blog: http://blogs.vtiger.com

> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      



From natan.pereira at fator9.com  Fri Nov 10 12:26:28 2006
From: natan.pereira at fator9.com (natan.pereira at fator9.com)
Date: Fri, 10 Nov 2006 15:26:28 -0200
Subject: [Vtigercrm-developers] Adding a new field with radio button
Message-ID: <20061110152628.uw0gorykx0g088wk@webmail.fator9.com>

I am having some problems with a new field, what I want is:

Add two radios buttons (when I am registring a new Lead), that when  
one is selected  appers a especific field and when the other is  
selected appers other especific field.

I know how to do a field in database, but I dont know how to do the  
radio button and where I will put de progamming (if clause).

I will be glad with somebody could help me...



From neil.temperley at exemail.com.au  Mon Nov 13 05:27:24 2006
From: neil.temperley at exemail.com.au (Neil Temperley)
Date: Mon, 13 Nov 2006 21:27:24 +1100
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items and
	general column layout
In-Reply-To: <45532E0A.4050709@vtiger.com>
Message-ID: <000901c7070e$4fc70c90$6401a8c0@Nemrut>

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtiger-Neil.tar.gz
Type: application/x-gzip
Size: 88018 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061113/b242a0d8/attachment.gz 

From lists.vtigercrm.com at callum-macdonald.com  Mon Nov 13 07:24:00 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Mon, 13 Nov 2006 19:24:00 +0700
Subject: [Vtigercrm-developers] Release naming (package naming)
In-Reply-To: <B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
References: <45516127.4030306@callum-macdonald.com>	<45516DF3.20809@pacific.net.sg>
	<B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
Message-ID: <455863E0.30509@callum-macdonald.com>

Remco, you're right, I'm confusing package naming with release naming.

The release naming documentation states "The vtigercrm project no longer 
produces Patches 
<http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/PatchSubmission> for 
distribution..." but there is a patch available here:
http://www.vtiger.com/index.php?option=com_content&task=view&id=30&Itemid=57

Who releases that patch? It's really the name of the patches that I 
think should be simplified, not the naming of the main releases.

Cheers - Callum.

Dhr. R.R. Gerbrands wrote:
> @ Nicholas,
>
> If you find it odd, you might want to wait using vtigercrm as we're in 
> the process of becoming mature. 
>
> @ Callum,
>
> What you are refering to is not release naming to my idea.
> But package naming.
> I think that's a bit confusing for more people,
> The release naming is still the same, in you example 5.0.2,
> depending on the target platform is you're suggested packet naming.
>
> I can agree with it, yet as our user are no newbee's the naming as 
> stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseNaming
> is enough, I would suggest adding a wiki page for the newbee's who 
> doesn't know what to download instead.
>
> Best regards,
>
> Remco
>
>
>
>
> Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:
>
>> I just found it odd that the naming issue is still being discussed till
>> today. Why isn't the standard set and enforced already?
>>
>> Callum Macdonald wrote:
>>> Hi Guys,
>>>
>>> I think the naming of releases should be simplified. I suggest Joomla 
>>> provides a good template to use (with one or two improvements):
>>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11
>>>
>>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
>>> from what version you can apply patch 2, and so on. I suggest we use 
>>> the 
>>> same method as Joomla. When a new version is released (5.0.2) then the 
>>> following files are released:
>>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>>> vtigercrm-5.0.2-full-windows.exe
>>> vtigercrm-5.0.2-full-linux.bin
>>> vtigercrm-5.0.2-full-lamp.tgz
>>>
>>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
>>> think it's important to include the windows/linux/lamp in the file 
>>> name. 
>>> I know it's obvious from the extension to MOST people, but not to 
>>> everyone.
>>>
>>> I also think these files should all be released in the same package in 
>>> sourceforge. In my opinion, splitting the full and patch releases is 
>>> confusing.
>>>
>>> I think this is a HUGELY important issue, as important as the recent 
>>> heated debate over the naming of the GA release.
>>>
>>> Comments on a postcard...
>>>
>>>
>>> Callum.
>>> _______________________________________________
>>> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>>>
>>>
>>
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
> Dhr. R.R. Gerbrands
>
> Artoge 
>
> ICT Security & Administration
> Jachthoornstraat 59
> 6219 BN  Maastricht
>
> kvk 14083961
> btw 155595106B01
>
> t:    +31 43 325 0316 
> m:  +31 6 2127 8082
> e:   remco at artoge.nl <mailto:remco at artoge.nl>
> i:    www.artoge.nl
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 



From remco at artoge.nl  Mon Nov 13 12:33:15 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 13 Nov 2006 18:33:15 +0100
Subject: [Vtigercrm-developers] Release naming (package naming)
In-Reply-To: <455863E0.30509@callum-macdonald.com>
References: <45516127.4030306@callum-macdonald.com>	<45516DF3.20809@pacific.net.sg>
	<B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
	<455863E0.30509@callum-macdonald.com>
Message-ID: <AFD411F9-259C-45D4-AE90-C46863E8ECFB@artoge.nl>

Hi Callum,

I see what you mean:

LAMP/WAMP download (6.1 MB/tar.gz)
v5.0 Patch 2  download  (0.65 MB/tar.gz)

I agree, that's not a propere release naming, reading blog: http:// 
www.vtiger.com/blogs/page/7/  that was handle by Philip and Mickie.
Looking at: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
ReleaseNaming and seeing tar.gz I think they should name this: "LAMP/ 
WAMP update from 5.0.1 to 5.0.2"

Cheers, Remco




Op 13-nov-2006, om 13:24 heeft Callum Macdonald het volgende geschreven:
> Remco, you're right, I'm confusing package naming with release naming.
>
> The release naming documentation states "The vtigercrm project no  
> longer
> produces Patches
> <http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/PatchSubmission> for
> distribution..." but there is a patch available here:
> http://www.vtiger.com/index.php? 
> option=com_content&task=view&id=30&Itemid=57
>
> Who releases that patch? It's really the name of the patches that I
> think should be simplified, not the naming of the main releases.
>
> Cheers - Callum.
>
> Dhr. R.R. Gerbrands wrote:
>> @ Nicholas,
>>
>> If you find it odd, you might want to wait using vtigercrm as  
>> we're in
>> the process of becoming mature.
>>
>> @ Callum,
>>
>> What you are refering to is not release naming to my idea.
>> But package naming.
>> I think that's a bit confusing for more people,
>> The release naming is still the same, in you example 5.0.2,
>> depending on the target platform is you're suggested packet naming.
>>
>> I can agree with it, yet as our user are no newbee's the naming as
>> stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
>> ReleaseNaming
>> is enough, I would suggest adding a wiki page for the newbee's who
>> doesn't know what to download instead.
>>
>> Best regards,
>>
>> Remco
>>
>>
>>
>>
>> Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:
>>
>>> I just found it odd that the naming issue is still being  
>>> discussed till
>>> today. Why isn't the standard set and enforced already?
>>>
>>> Callum Macdonald wrote:
>>>> Hi Guys,
>>>>
>>>> I think the naming of releases should be simplified. I suggest  
>>>> Joomla
>>>> provides a good template to use (with one or two improvements):
>>>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/ 
>>>> frs.joomla_1_0.1_0_11
>>>>
>>>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not  
>>>> clear
>>>> from what version you can apply patch 2, and so on. I suggest we  
>>>> use
>>>> the
>>>> same method as Joomla. When a new version is released (5.0.2)  
>>>> then the
>>>> following files are released:
>>>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>>>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>>>> vtigercrm-5.0.2-full-windows.exe
>>>> vtigercrm-5.0.2-full-linux.bin
>>>> vtigercrm-5.0.2-full-lamp.tgz
>>>>
>>>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0- 
>>>> patch2.zip?download>I
>>>> think it's important to include the windows/linux/lamp in the file
>>>> name.
>>>> I know it's obvious from the extension to MOST people, but not to
>>>> everyone.
>>>>
>>>> I also think these files should all be released in the same  
>>>> package in
>>>> sourceforge. In my opinion, splitting the full and patch  
>>>> releases is
>>>> confusing.
>>>>
>>>> I think this is a HUGELY important issue, as important as the  
>>>> recent
>>>> heated debate over the naming of the GA release.
>>>>
>>>> Comments on a postcard...
>>>>
>>>>
>>>> Callum.
>>>> _______________________________________________
>>>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>
>> Dhr. R.R. Gerbrands
>>
>> Artoge
>>
>> ICT Security & Administration
>> Jachthoornstraat 59
>> 6219 BN  Maastricht
>>
>> kvk 14083961
>> btw 155595106B01
>>
>> t:    +31 43 325 0316
>> m:  +31 6 2127 8082
>> e:   remco at artoge.nl <mailto:remco at artoge.nl>
>> i:    www.artoge.nl
>>
>>
>> --------------------------------------------------------------------- 
>> ---
>>
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061113/a73c5675/attachment-0001.html 

From jamestillman at sevatechnologies.com  Tue Nov 14 09:20:08 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 06:20:08 -0800
Subject: [Vtigercrm-developers] Bug in soap/vtigerolservice.php
Message-ID: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>

The vtiger forums are down, and there is no immediately obvious way to
log bugs for vtiger, so I'm resorting to subscribing to your mailing to
report a bug.
 
Using version 502.
 
On line 754 in soap/vtigerolservice.php, there is this code:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.$account_name."'";

Besides being an invite to a sql-injection attack, this also creates
problems for the Outlook plugin when a contact in Outlook has a company
name with an apostrophe in it, and that contact does not yet exist in
vtiger.  The contact John Smith, with Bob's Pool Hall in the company
name, for example, will create the very unhelpful "Invalid return value
from vtigerCRM" error message when you attempt to sync using the Outlook
plugin.
 
Modifying line 754 to read:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.addslashes($account_name)."'";

while not the best option for a fix, does cause the contact sync to
begin working even with apostrophes in the company name.
 
jpt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/e0d8863f/attachment-0001.html 

From jamestillman at sevatechnologies.com  Tue Nov 14 09:44:32 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 06:44:32 -0800
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
Message-ID: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>

((If someone would fix the forums registration, I'll gladly start
posting these issues on the forums if this is not the correct venue.
Until then, I assume reporting in some way is better than not reporting
at all.))
 
modules/Emails/Emails.php seems to be lacking some key class-level
fields.  Namely, these:
 
var $rel_users_table = "vtiger_salesmanactivityrel";
var $rel_contacts_table = "vtiger_cntactivityrel";
var $rel_serel_table = "vtiger_seactivityrel";

It makes use of these fields in its code, as in the function
set_emails_contact_invitee_relationship(), but they are not set anywhere
in the class.
 
This problem comes to light when you attempt to use the Outlook plugin
to link emails to a vtiger contact.  You get the typical "Invalid return
value from vtigerCRM" error message.
 
I inserted the lines mentioned above at line 38 in Emails.php and
Outlook email linking started to work.
 
Most of the Outlook interaction with vtiger in v502 seems to be sadly
broken out of the box.
 
By the way, anyone thought of improving the Outlook plugin to do
something other than stupidly report that vtiger returned an invalid
response?  Having to use Fiddler or some other HTTP inspection utility
to just to find the PHP error message from vtiger is time-consuming.
 
jpt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/ae70ce49/attachment-0001.html 

From remco at artoge.nl  Tue Nov 14 09:58:53 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 15:58:53 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
Message-ID: <86206992-3704-444F-8FB0-96CF3A4437FB@artoge.nl>

James,

Even the forums, aren't the place to report a bug, instead that  
should be done within Track

First see: community tab.
Gives http://www.vtiger.com/index.php? 
option=com_content&task=view&id=86&Itemid=133

Then bug tracker, you will need a track login.
Gopal is your man to provide you with a login, ask him:  
gopals at vtiger.com

Thanks for reporting any issues,

Best regards, Remco



Op 14-nov-2006, om 15:44 heeft James Tillman het volgende geschreven:

> ((If someone would fix the forums registration, I'll gladly start  
> posting these issues on the forums if this is not the correct  
> venue.  Until then, I assume reporting in some way is better than  
> not reporting at all.))
>
> modules/Emails/Emails.php seems to be lacking some key class-level  
> fields.  Namely, these:
>
> var $rel_users_table = "vtiger_salesmanactivityrel";
> var $rel_contacts_table = "vtiger_cntactivityrel";
> var $rel_serel_table = "vtiger_seactivityrel";
> It makes use of these fields in its code, as in the function  
> set_emails_contact_invitee_relationship(), but they are not set  
> anywhere in the class.
>
> This problem comes to light when you attempt to use the Outlook  
> plugin to link emails to a vtiger contact.  You get the typical  
> "Invalid return value from vtigerCRM" error message.
>
> I inserted the lines mentioned above at line 38 in Emails.php and  
> Outlook email linking started to work.
>
> Most of the Outlook interaction with vtiger in v502 seems to be  
> sadly broken out of the box.
>
> By the way, anyone thought of improving the Outlook plugin to do  
> something other than stupidly report that vtiger returned an  
> invalid response?  Having to use Fiddler or some other HTTP  
> inspection utility to just to find the PHP error message from  
> vtiger is time-consuming.
>
> jpt
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/564d4cad/attachment-0001.html 

From jamestillman at sevatechnologies.com  Tue Nov 14 10:25:50 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 07:25:50 -0800
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <86206992-3704-444F-8FB0-96CF3A4437FB@artoge.nl>
Message-ID: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>

Thanks, Remco.  I had assumed that the bug tracker was the way to go,
but saw no way to sign up for vTiger's Trac.
 
I clicked on "Bug Tracker" in the Community section and got this page:
 
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report
 
which has no information on signing up.  Clicking "vTiger Trac" in the
community section is also a dead end for bug reporters, it seems.
 
Did I miss something obvious?
 
By the way, is there any way to search by keyword in Trac?  Not easy to
determine if a bug exists if you have to scan the whole bug database.
 
jpt


________________________________

	From: vtigercrm-developers-bounces at lists.vtigercrm.com
[mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf Of
Dhr. R.R. Gerbrands
	Sent: Tuesday, November 14, 2006 9:59 AM
	To: vtigercrm-developers at lists.vtigercrm.com
	Subject: Re: [Vtigercrm-developers] A bug in
modules/Emails/Emails.php
	
	
	James, 

	Even the forums, aren't the place to report a bug, instead that
should be done within Track

	First see: community tab.
	Gives
http://www.vtiger.com/index.php?option=com_content&task=view&id=86&Itemi
d=133

	Then bug tracker, you will need a track login.
	Gopal is your man to provide you with a login, ask him:
gopals at vtiger.com

	Thanks for reporting any issues,

	Best regards, Remco



	Op 14-nov-2006, om 15:44 heeft James Tillman het volgende
geschreven:


		((If someone would fix the forums registration, I'll
gladly start posting these issues on the forums if this is not the
correct venue.  Until then, I assume reporting in some way is better
than not reporting at all.))
		 
		modules/Emails/Emails.php seems to be lacking some key
class-level fields.  Namely, these:
		 
		var $rel_users_table = "vtiger_salesmanactivityrel";
		var $rel_contacts_table = "vtiger_cntactivityrel";
		var $rel_serel_table = "vtiger_seactivityrel";
		
		It makes use of these fields in its code, as in the
function set_emails_contact_invitee_relationship(), but they are not set
anywhere in the class.
		 
		This problem comes to light when you attempt to use the
Outlook plugin to link emails to a vtiger contact.  You get the typical
"Invalid return value from vtigerCRM" error message.
		 
		I inserted the lines mentioned above at line 38 in
Emails.php and Outlook email linking started to work.
		 
		Most of the Outlook interaction with vtiger in v502
seems to be sadly broken out of the box.
		 
		By the way, anyone thought of improving the Outlook
plugin to do something other than stupidly report that vtiger returned
an invalid response?  Having to use Fiddler or some other HTTP
inspection utility to just to find the PHP error message from vtiger is
time-consuming.
		 
		jpt
		
		_______________________________________________
		Reach hundreds of potential candidates -
http://jobs.vtiger.com 


	
	Dhr. R.R. Gerbrands

	Artoge 

	ICT Security & Administration
	Jachthoornstraat 59
	6219 BN  Maastricht

	kvk 14083961
	btw 155595106B01

	t:    +31 43 325 0316 
	m:  +31 6 2127 8082
	e:   remco at artoge.nl
	i:    www.artoge.nl



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/79c869d9/attachment-0001.html 

From remco at artoge.nl  Tue Nov 14 11:33:25 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 17:33:25 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
Message-ID: <6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>

Hi James,

No, you didn't miss something. Your right, it's not easy to see how  
to report a bug, theseday's something more to-do, if I only had the  
time :-(


Yes you can search within track:
1) on the upper right use: Custom Query
After clicking it:
2) use [Add filter] and
3) select a filter option (includes also Keywords)

Best Regards,

Remco



Op 14-nov-2006, om 16:25 heeft James Tillman het volgende geschreven:

> Thanks, Remco.  I had assumed that the bug tracker was the way to  
> go, but saw no way to sign up for vTiger's Trac.
>
> I clicked on "Bug Tracker" in the Community section and got this page:
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report
>
> which has no information on signing up.  Clicking "vTiger Trac" in  
> the community section is also a dead end for bug reporters, it seems.
>
> Did I miss something obvious?
>
> By the way, is there any way to search by keyword in Trac?  Not  
> easy to determine if a bug exists if you have to scan the whole bug  
> database.
>
> jpt
>
> From: vtigercrm-developers-bounces at lists.vtigercrm.com  
> [mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf  
> Of Dhr. R.R. Gerbrands
> Sent: Tuesday, November 14, 2006 9:59 AM
> To: vtigercrm-developers at lists.vtigercrm.com
> Subject: Re: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
>
> James,
>
> Even the forums, aren't the place to report a bug, instead that  
> should be done within Track
>
> First see: community tab.
> Gives http://www.vtiger.com/index.php? 
> option=com_content&task=view&id=86&Itemid=133
>
> Then bug tracker, you will need a track login.
> Gopal is your man to provide you with a login, ask him:  
> gopals at vtiger.com
>
> Thanks for reporting any issues,
>
> Best regards, Remco
>
>
>
> Op 14-nov-2006, om 15:44 heeft James Tillman het volgende geschreven:
>
>> ((If someone would fix the forums registration, I'll gladly start  
>> posting these issues on the forums if this is not the correct  
>> venue.  Until then, I assume reporting in some way is better than  
>> not reporting at all.))
>>
>> modules/Emails/Emails.php seems to be lacking some key class-level  
>> fields.  Namely, these:
>>
>> var $rel_users_table = "vtiger_salesmanactivityrel";
>> var $rel_contacts_table = "vtiger_cntactivityrel";
>> var $rel_serel_table = "vtiger_seactivityrel";
>> It makes use of these fields in its code, as in the function  
>> set_emails_contact_invitee_relationship(), but they are not set  
>> anywhere in the class.
>>
>> This problem comes to light when you attempt to use the Outlook  
>> plugin to link emails to a vtiger contact.  You get the typical  
>> "Invalid return value from vtigerCRM" error message.
>>
>> I inserted the lines mentioned above at line 38 in Emails.php and  
>> Outlook email linking started to work.
>>
>> Most of the Outlook interaction with vtiger in v502 seems to be  
>> sadly broken out of the box.
>>
>> By the way, anyone thought of improving the Outlook plugin to do  
>> something other than stupidly report that vtiger returned an  
>> invalid response?  Having to use Fiddler or some other HTTP  
>> inspection utility to just to find the PHP error message from  
>> vtiger is time-consuming.
>>
>> jpt
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/ef6bad09/attachment-0001.html 

From jtk at yahoo.com  Tue Nov 14 13:49:47 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Tue, 14 Nov 2006 13:49:47 -0500
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
Message-ID: <pan.2006.11.14.18.49.47.164625@yahoo.com>

Dhr. R.R. Gerbrands wrote:
> Your right, it's not easy to see how to report a bug, theseday's
> something more to-do, if I only had the time :-(

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart

now links to

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets

which links to

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess



From joestewart at users.sourceforge.net  Tue Nov 14 14:09:57 2006
From: joestewart at users.sourceforge.net (Joe Stewart)
Date: Tue, 14 Nov 2006 13:09:57 -0600
Subject: [Vtigercrm-developers] trac Account Manager Plugin
In-Reply-To: <pan.2006.11.14.18.49.47.164625@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
Message-ID: <455A1485.3090109@users.sourceforge.net>

on 11/14/2006 12:49 PM Jeff Kowalczyk said the following:
> Dhr. R.R. Gerbrands wrote:
>   
>> Your right, it's not easy to see how to report a bug, theseday's
>> something more to-do, if I only had the time :-(
>>     
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart
>
> now links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets
>
> which links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess
>
>   

Just a side note.  There is now an Account Manager Plugin for trac that 
allows users to register for an account:

http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin

Joe


From remco at artoge.nl  Tue Nov 14 14:26:49 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 20:26:49 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <pan.2006.11.14.18.49.47.164625@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
Message-ID: <314E9A1B-3A8C-4EE8-8B59-E2749627A2D8@artoge.nl>

Thanks, Jeff :-)

remco

Op 14-nov-2006, om 19:49 heeft Jeff Kowalczyk het volgende geschreven:

> Dhr. R.R. Gerbrands wrote:
>> Your right, it's not easy to see how to report a bug, theseday's
>> something more to-do, if I only had the time :-(
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart
>
> now links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets
>
> which links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/e739431f/attachment-0001.html 

From jtk at yahoo.com  Tue Nov 14 15:38:16 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Tue, 14 Nov 2006 15:38:16 -0500
Subject: [Vtigercrm-developers] trac Account Manager Plugin
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
	<455A1485.3090109@users.sourceforge.net>
Message-ID: <pan.2006.11.14.20.38.15.301337@yahoo.com>

Joe Stewart wrote:
> Just a side note.  There is now an Account Manager Plugin for trac that
> allows users to register for an account:
> 
> http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin

That, and the WebAdmin plugin, which will eventually be part of Trac core:
http://trac.edgewall.org/wiki/WebAdmin

Trac is currently at release trac-0.10.2, BTW. We're running trac.0.9.5.



From jeri at vtiger.com  Wed Nov 15 01:28:51 2006
From: jeri at vtiger.com (Jeri John)
Date: Wed, 15 Nov 2006 11:58:51 +0530
Subject: [Vtigercrm-developers] Bug in soap/vtigerolservice.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
Message-ID: <10eea4db828.-8020503555403603074.-7158338222294584874@@vtiger.com>


Dear James,
              Thanks for your fix.We have integrated this and checked in to SVN.
The revision is 9840.

Thanks & Regards,
Jerry.


---- On Tue, 14 Nov 2006 James Tillman <jamestillman at sevatechnologies.com> wrote ---- 

The vtiger forums are down, and there is no immediately obvious way to log bugs for vtiger, so I'm resorting to subscribing to your mailing to report a bug.
 
Using version 502.
 
On line 754 in soap/vtigerolservice.php, there is this code:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.$account_name."'";

Besides being an invite to a sql-injection attack, this also creates problems for the Outlook plugin when a contact in Outlook has a company name with an apostrophe in it, and that contact does not yet exist in vtiger.  The contact John Smith, with Bob's Pool Hall in the company name, for example, will create the very unhelpful "Invalid return value from vtigerCRM" error message when you attempt to sync using the Outlook plugin.
 
Modifying line 754 to read:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.addslashes($account_name)."'";

while not the best option for a fix, does cause the contact sync to begin working even with apostrophes in the company name.
 
jpt

_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061115/32ed6281/attachment-0001.html 

From fboudra at gmail.com  Wed Nov 15 05:14:40 2006
From: fboudra at gmail.com (Fathi Boudra)
Date: Wed, 15 Nov 2006 11:14:40 +0100
Subject: [Vtigercrm-developers] trac Account Manager Plugin
In-Reply-To: <pan.2006.11.14.20.38.15.301337@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<455A1485.3090109@users.sourceforge.net>
	<pan.2006.11.14.20.38.15.301337@yahoo.com>
Message-ID: <200611151114.40395.fboudra@gmail.com>

Le mardi 14 novembre 2006 21:38, Jeff Kowalczyk a ?crit :
> Joe Stewart wrote:
> > Just a side note.  There is now an Account Manager Plugin for trac that
> > allows users to register for an account:
> >
> > http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin
>
> That, and the WebAdmin plugin, which will eventually be part of Trac core:
> http://trac.edgewall.org/wiki/WebAdmin

Web admin plugin is already installed. are you interested by adding 
AccountManagerPlugin if it isn't a duplication of webadmin in terms of 
functionnality ?

> Trac is currently at release trac-0.10.2, BTW. We're running trac.0.9.5.

in TODO list concerning infrastructure:
* update gforge
* update trac

just, i lack of time atm. We'll do asap.

cheers,

Fathi



From jens at Strawberry.COM  Wed Nov 15 06:40:42 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Wed, 15 Nov 2006 12:40:42 +0100
Subject: [Vtigercrm-developers] [FEATURE REQUEST] Support Multiple
	SalesOffices
In-Reply-To: <20060825232016.F13092@Strawberry.COM>;
	from Jens Hamisch on Fri, Aug 25, 2006 at 11:20:17PM +0200
References: <3E26E7A199CABA49822B3E6B741434F97D0914@exch.accuratetechnologies.com>
	<20060817165659.B21264@Strawberry.COM>
	<20060818091439.U2464@Strawberry.COM>
	<20060825232016.F13092@Strawberry.COM>
Message-ID: <20061115124042.D4158@Strawberry.COM>



Hi Dennis,
hi *,


it took a while to check everything out and finally to upload
my changes to the SVN, but now I finally managed to do it.
The feature branch 5.1_jens now contains a copy of 5.0.2 plus
the following changes:

    FCR 2035 - Multi Organization and Organization Units support
    Postgres 8.1 support (5.0.2 does not contain all required
	patches)
    FormLetter support (Campaign reports may utilize the contacts
	as secondry table to generate a list of addresses to be
	used as form letter database in openoffice/staroffice/etc)
    Some bugfixes regarding vtiger 5.0.2 
    Account-Contacts filter on SalesOrder-, PurchaseOrder-, Quote-
	and Invoice-Popups): If an account is specified, the popup
	shows only tho contacts related to that account. May be over-
	ridden in the popup).

This version is based on vtiger 5.0.2.
It is almost a snapshot of my working vtiger copy.
It runs stable in the following environment:

    Solaris 10 (Sparc 64 bit)
    Apache 2.2.2
    PHP 5.1.4
    Postgres 8.1.2 (with perl 5.8.7 backend)

It is currently available on SVN only

    svn checkout http://vtiger.fosslabs.com/svn/vtiger/vtigercrm/branches/5.1_jens


The branch also consists of a SQL-Script to migrate an existing database
from 5.0.2 to 5.1_jens:  schema/502To51Jens.sql
This script offers the opportunity to use 5.1_jens on an existing database.
However, I strongly advise to produce and save a backup before doing so.

You may also start on an empty database using the usual installation
prodcedure.

If you start from scratch and populate the database with your entities
(e.g. using a SQL dump from your productive database), you'll have to
adjust the organization assignment before using the database as follows:

    INSERT INTO vtiger_entity2org
	SELECT 'vtiger', crmid, '1' FROM vtiger_crmentity;

Replace 'vtiger' by your organizationname in this case.


I'd appreciate any comments on my addons.

Kind regards,
Jens




On Fri, Aug 25, 2006 at 11:20:17PM +0200, Jens Hamisch wrote:
> Hi Dennis,
> hi *,
> 
> I've opened a feature change request in trac on this: #2035.
> Attached please find a proposal describing the required database
> and GUI changes.
> 
> I'm on vacation for the next 2 weeks, so IMHO I could start
> working on this enhancement based on the GA aftar my return.
> 
> 
> Kind regards
> Jens
> 
> 
> 
> On Fri, Aug 18, 2006 at 09:14:39AM +0200, Jens Hamisch wrote:
> > 
> > Hi Dennis,
> > hi *,
> > 
> > 
> > I'd like to post a proposal for an implementation of this feature.
> > In advance there's one item unclear to me:
> > 
> >     What is the "official" procedure to add items to the
> >     vtiger_tab and vtiger_field tables?
> > 
> > As I'd  suggest the introduction of new tables, there should be a
> > new table identifier on those. I'd like to ensure not to get into
> > conflict with other addons and the ongoing process from RC to GA.
> > So how do I "reserve" unique table ids? And is there a space for
> > private tables (if someone adds private stuff)?
> > 
> > 
> > Jens
> > On Thu, Aug 17, 2006 at 04:56:59PM +0200, Jens Hamisch wrote:
> > > Hi,
> > > 
> > > > I also agree that there may be a default sales office for
> > > > sub-organizations, but I don't thing that sub-organizations is a
> > > > prerequisite for having multiple sales offices.
> > > 
> > > yes ...
> > > 
> > > The problem I have, that I need support for more than one entire
> > > organization. So my point of introducing organizational units was
> > > to split this off the organization table. The wording doesn't matter
> > > at a first glance. A 'sales office' or 'location' would just be
> > > some abstract part of an organization.
> > > 
> > > > Jens, are you going to work on this?
> > > 
> > > Yeah.
> > > 
> > > > I'm going to be offline for a week (military exercise) so I won't be
> > > > able to work on it for a little bit.
> > > 
> > > Have fun!
> > > I hope to able to present something to you ehen you'll be online again.
> > > 
> > > -- Jens
> > > 
> > > --------------------------------------------------------------------------------
> > >      /
> > >  +##+|##+   STRAWBERRY                     Jens Hamisch
> > > +v#+v v##+  EDV-Systeme GmbH               Managing director
> > > / v    v\v
> > > | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> > > |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
> > >  | .     |                                 Fax:          (+49 8171) 41805-59
> > >  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
> > >   \____/    Strawberry at Strawberry.COM      
> > > 
> > > _______________________________________________
> > > Get started with creating presentations online - http://zohoshow.com?vt 
> > 
> > -- 
> > 
> > --------------------------------------------------------------------------------
> >      /
> >  +##+|##+   STRAWBERRY                     Jens Hamisch
> > +v#+v v##+  EDV-Systeme GmbH               Managing director
> > / v    v\v
> > | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> > |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
> >  | .     |                                 Fax:          (+49 8171) 41805-59
> >  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
> >   \____/    Strawberry at Strawberry.COM      
> > 
> > _______________________________________________
> > Get started with creating presentations online - http://zohoshow.com?vt 
> 
> -- 
> 
> --------------------------------------------------------------------------------
>      /
>  +##+|##+   STRAWBERRY                     Jens Hamisch
> +v#+v v##+  EDV-Systeme GmbH               Managing director
> / v    v\v
> | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
>  | .     |                                 Fax:          (+49 8171) 41805-59
>  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
>   \____/    Strawberry at Strawberry.COM      
> 

> %PDF-1.4
> %????
> 1 0 obj
> << /Length 2 0 R
>    /Filter /FlateDecode
> >>
> stream
> x??Y??\'?_i???\L??#E?v??^?]?/??U5S?????g&?V???V????m??H????_B
> y?"Zu??m??U??F?Y~??O???=???ya%`^~??WB)??Q??J?????wJ
~|+???I_?7?)??<?O??<O?f?<N?f
??v
> U?|$?*??|???*???gX???????'????BSb??k?a????/+?mO???u?????
?x??(
?
???????B??0?W\??g?
1J
?h?T?iH?gZ?g???5y?,1d?o???"?dP???????eR5+?*1W~????3?C?X?Y?\S?G??lWft??$}k????L????M?${?
??9?????6P?
?
?WK???Z{?6???F
??
??pC?E
K?y
t???}|C~???C?`1F?S?QF?A?? ???r?56?L???F?
> ?_A?m`D?
???v|?u|P????_???F0??Kl\??8F?o??zV;k??$?(?m_?qC*??????)
XJ??)??@?=?$?????????5?y?M?w?pWv
?/|?Jy???[???$??W?O??#%??x?):??eU?????T??H0?Zxx??JKOu???C?mJ"???????H???`X}11?.E??g??X??w ?
???j???Y??"!?Tkh?.???	FVNxV:?uge??ov*]?'?L)JR???P???????Y?d
???pX??l??s???oB=Pf?RV4&??d
??[JH??K@????X?u?)????y????K?S????9??
??j?
\?F`s
8?46&
??S???????2?Ru???Ba/#???F11b???{?????!2<?s????n????????iP
??d????
z6=0)??z?xdW?[.Il??b???iu????????O???#?<??M?|
N??r???\???9H???????T?????????d3?]??U
?-????+??2I?<???.?u?5??-j??????Z?I@?|?~M????Z$?"??&S??a=?q,?Zc???R0?\j?e????_]??ia??-??|?CQ?>?wR??????J?/?BB}???phOe?????<3?R??????^?*Fn? ?`??I?4??X???)U?5?un>??1?cY
b???,?D>??	?????`=B/U??o??1/?d<}?5???T3?w^??
?n2c?-???x?;?
|0y=
o???zt?wC?
?????_>?kx?Mcl?y??
Y&3_???:????i?????9???I(j??1?????o
?Mo?e???t?2??ve?G??{?l-?Du????r?????HS
LJ?h?sF??&S+????P?F5CK?:?;???8nT-4???6?WP??z?X?????9mh8??s????
V?J?}??5????P?w?=%??7{J??T???????.=^%J??'??????I[??(?>wIR?p
> ?r?W:J[??5?
??<v&??P
3Y???:???????E&??l?+Q???????TFK?9f?6k??L?s??*???w????l??cT?????/1???Do???f?r1?
?W?B?K????????no??
1??;?9[ZFv??^???2*?9?e??U?-??*?2QV???g??J?&????lb????}??????.?_}
{?>????????8??T????????x??
endstream
> endobj
> 
> 2 0 obj
>   1713
> endobj
> 
> 4 0 obj
> << /Length 5 0 R
>    /Filter /FlateDecode
>    /Length1 9796
> >>
> stream
> x??z{|T???Z{???={?{&?d?0&<?0I?0	?C#??@F'O????p?"	???9
j-z????p?`??z?h=???U???Xs????:???=CDk?????????;?^?z?{/?????E;A???5mO?
>??)B?X??KJ????_????a??
??!r!??aSO??A?&??/!d???PSo?~?U?2v?s??A??X
?SP??is??;?T?
?;P???????P=??&?/?\s???
????fs????!??????????f???????u4??????m1oB??>Z at yZg??
> ?J?????h0?????Hs?gd?$??????O??u#?7???d???_~??????e
> ????.?J???2?
?i??h???h???|??[
o?h??<????d1z?@???It
???:?6t?`z?=t<f?S?	u1G?
Z?j?m??^F????ss
> f???r}?rfzgL?65;?6?????Hw?9?6??l2DA??j?*???X?`4???*?9^?????I???Z??,?Sw?2???I?_?g|??9Y?3???2???t?c???2??9??.??vJM*?o??6?
???a???#J????)???4?E?E
?????Z?0?v?-?2????;? ?.gf???1Y?Zb??0 ???????95q~??]???LI??E1
???
????tl???=?DT?j?=?5?????"Y?Mk(K)?????'?H?M??????)_?b??????ZT9?>???,???%0b????d???,?????{???[{??[UUe?K=? ,V?RG??rf&??b@}?
??RC?,m??dZ??4?CK?@05??Q?????????????b?5r??????[\?jJ
?
V?	/?r'??|U?"J??f?3)???p?JovJ??;`??T'???J?K?
s?`?\Yy?Uf?9+?e?
i??(???????R?j????#??y????e
?l0<XsjbG?G=???/l+
????0????!g?lOUL7?y?{?
e?*??nC??j??*?????
.??
????T?%`???*'????kO?T?@q???Sl?<j?;??E)????9t*?j??qwe?.?Z?q?yA
a?s?f?e-??q?grz???(?TKL?=?'?VSi?????
???iQ%q2UI?q???`?E1??i?A??????q???EU?h@??????u?R???$[?'E?Z? ?(???6d?C??;8?gZ"@ ??&??z??zdj??
> '"*?????}??x</??7???3????q?????=`????X_?u??N??gf?
AZ3?)&?!v:Q}P#f
> B?Z,

?
?W?1??-?cd?a??1??H??-kI???F?f??K	???????????*?????7?#>???????m?????L??.?m??-Y??l???{??{ql?3?c/???????G?k????~i??m???~??=o`?z?b???4K???p#?
t?QA????J?	!?QP??~?3?
?M@]???8*.*.??J??2??o?Z
?l?A
%l??????DEC??3d?{??o??e?{{????g`??u?"??AW?bzZ?E???????N??q6???w?8?=??e?r?J<5?YP?? ?JO??";?6????9`
> ?
??dE
????!:??MA?
z?F???0DE??g~/??L?8??
??2???
??x:??;???|?!????n?zQ?\)
7?
> 
	y??Y^}D???(?????=?J?b?P?X?V
?TbkV~7P???2???
~zC?????????U;J.?Y4w??????U-?V?X??%???????a??~?????jP~0??'?{??Z??J?(???2't*?W?C?,?D??J?HV??????l???_|r?21?.1??S\w? ?r`?:YRq#/?/O[??1m{?Pgry\?L?HX!T,??#?3?b?ff???????L?x???S??L??t??)???9.??]?=?`,:
S?w?????wDV?Q????)????????o?(?T???e???B!l0????????@?`6(]
?u&C
> ?r???\??e?O??tE?;"???
???????\??
V?1?
fz????:-?z]o?????????J?N???	6????-\
> \?
?'GP&?,?bq????R?_?W8?Q?2"V?Q???K?E,?Z??o?b?~?12?????F??4????v??
@@q?x!???	??
6qQQ^.?S&-??????e?v??H??U?
?-8qb??h???????{+??'??z?gvI????={??????;??\?A}VpN?

t?????`?Q+?^?JE?(H?U???!!(0BR?)e????S??&?G???93???'8???????3nOD?h?Zz'??t?????,?l
 j?zCm??]Pg?t*?1	#*q
???d/5?5??=?n?3F??6????C???P	?? [c^n??B??N????wG?51??O???
???????o??????jg??*??k???~?????L?e?Y+??VT???~????7?6'-Jv{?b1??/G?J&??"??????[r??????	0??C?O???6l_?4??????9?????r?p??4???6c??.?N?L?????6#?4????z?H????d23I
????K??:S?
??d?<^?U???O???m?G?1??jN????C???H+?%?5??}\?9?b>?.?????B?B_?12?????H?????????????c*??R?????}?G_???H??j%?	?<?^???{????-?$q??_={v[?????_~?s?#???v??????????m55???4??k??M?Pv???~?3?a"!??|??p??p?6??{?q!?????I?=?#???G	?%?PmUN?@|??e??`?z???0?C+??????1??BX30?0&v,?bR
???"???r??|! '?3R???0?E.?(?O??z?P|?8??????/g?y?r
? {
?????sq?8?Z?-Sp^?%???0o?
#?	?6?(????u??? b?U
U??:????'??????x?@Va?Aa1???`6?(??????|?xU?9???kW7????I?G????
??s?>?c?C?????VO?
&?
??w?9?p?+?1???:S???(???,\)??[ko?r??t???1=???@I/?8jI?P?P>?8N?'D?9?Jnds?
?+??j??UIJ??
> ?t?{?z??u?3??,???"?yB?{c8??y?z?G????~t??
l?z???????c?5D?$????v?mh~p?xl^s??R*,?T?*U#iV)-+???C?8??'?????Dh<?|?L	D????d1#?????,??????????!??z?
> ?s?#\?x
??hL\?w#
?y?h??%~v?????????>??{?5??????m?:#p]5??????????2?	*p?G?9?-

?A??k?z??
m?????;I???jzj?????.????{
?By?=l-s5?6?m?n?2?7?i??f?l?b??F???h?
??Z7?<?jsd0?|2?%?u?M?8_T??E6l?e?

?u???? ???`zTB?(??????????C??O:#?

> !?Cv%?0ZvJ~??XT?e???x?T7x
?NY??????l<?K}!w???????g??X??o????j??\???o~]}??+?bYS??+74?TwC??????????u??-?
> s????SK??O????s??????7??-	??di???s??Kn?M?g?.?*P ???	\?x3X	3??,0<?CA
?c>?M?1>???m?-^b????_?
?*?G??????
d???
> dA??fn??j???????j????M?	6ee
??2??x???r
??2)H?f1?+?'????????N?b{????????%???a
TE??`+&??n?_????m???g?#H4???a?lLk
u?%/9???,?XP??dwE?F???v????7?5??????;~=td`??????o_}%?'????;x???=?3z?RW?E??j??????0?).T6)YV?R5??`???1????P??}
> dV(?/y?
> bCx
?
?T?$
B,Ks???!????vSN??r!
\*?
???!n?
'?T?e?_=!?*???????Q| Q????<P??????S?Ieb
?????:?`%FaT%"???3h?Cy?y|2???&	??
??
8?m?????db?O7???Mk?y??e3??F?
f??
> ???m????^9K]?
?/??)A?J?D?D?B??	B??????x?!??A?F^&BD??Z???c.???e?(e??k?g?,<??Om{??Om?l?<????3??&??N???Y?0?????????s
> ??At\?n???~?0z?(L1?????Uf?
?7^?1B???C????I?*N??P273?z?=?d?"='??:?n??V?<?D????G:!g???"????M?);??N????>'u?I?r?'U????'?<??3'
?V??~??G
> =?????9???6W?????Jx/a^2?.?Y?Y?/?y??_?s??%o??	vp?????B at uj???R@??????0~?`2&d?Vaw:3??F?Z??
#>@??,acI??	?j???A?eOz????%?Y?B??J?~??K+??????????ujA?{???#=?<???/?~?z?????????fY?=?my??j5?~I???ucz?7?j?]4
??u/?????sU??a?F?4?C??8?3 ?????A?&??+??6?Q????4+??x???t????+???H?YqQ?H???[???-
???????Yx??iW<xb'??s?q????????q0??K?????j??J?R?b?]h??&
?B?C0?T?458???^?{Q??U*H<??*
a#?? )??
,	5?"?(|6???CrK
??U??P)??b?????????_?G??c??k?~<z-?^??p4???c???
?,q??_N\JF??K??=8????'2[5[??%
kd%T????ZD??E??Y8?vUj8??W)?<
?g??0???
> 
1?h?j???
> V?h??"\???*??!?!??
?W??,?X????O P???2??9???C
????7?s???:s?Z?kr???$_?&???&.&Z
> ?$n?O4^??G????L_??
??????A?P?
??????X?#HfA??#`?$???Y?1???	??1?????rp???
> ?????7???"?z?? ??$?M??????@n??k$c??c?3o??$?#????c?	E?G??oe?????7X??v)?+'B?????
Ekb?-?Ea?????&f?????F??a
> !??
?????_@???I?
J?b???(??GQ5???0?
> dc???\?f???gFQ??@???v
k#K????'?cA????_p??e??^???&??	????>???{?a~!?????X?Q?@qU9MY???JS?R???)=h
?l? "??Q@
???F{E??I^????8???
?S8A.???????p????p
??!
+???;?*X????1?37R8??D??	ZH?R8???2
sh6iK?<?????N-n???????^??????Z?z:?74uIk????[Z?z??E?
m?
5]??[?????
???n??I?GwJ

?

[?gIK??uu???CRs?T#uu??7l???(?6??U???\?$m???j`?
??]

@U??????????????::?s??6??5?6to???\8G??WJu??V???I?????W??y???hs?(:h????????m???P=?j?^X
jEm?u?????Ze?+?o@???-???
8???+???
> ??C9)??????&x?[???k
P6@?U???\#?cW??[????????.y?z????ZQ??????p?&??j=P??3(e?]?d???j?g??-?g?z????	c?j7??????i(}k?*y?n??g?K?s??????f??q2?????zrSk?L?6??I???\??Jt
??Kh??????|???w\???)~?????w????????{??B?"????m?????w?%??x?N?N2???}????a<2Z??????%?|W???H??{?]???{????|W???|W?7?%??z????^?y?5?[???Vg?5??????YO)Q?????jK??jsnjul?bun?????b????fKzc?????hh2;?????X???q?}?{
?v?D
?z
"?OT+]?????}???G??
0P?t?D
???
??Q?j
?C???j??
> ??
???JW =|*?
?}??R`1??~?6?????????Y??9??~?t!{???,a?G/?
L??????;?t?Mg4?u?h?juz-??C?L^????B??u?W??yJ)T??\????c??h????	C??$??.????{???????0~?
> Zc?C??c:?@a\?n}?)?????O???????TYU????/_]k????S???*H???{Q?H?I=?4?Z???6%??1=@?????/Gt????????n????Q
> endstream
> endobj
> 
> 5 0 obj
> 6721
> endobj
> 
> 6 0 obj
> << /Type /FontDescriptor
>    /FontName /CAAAAA+GillSansMT
>    /Flags 4
>    /FontBBox [ -161 -229 1040 916 ]
>    /ItalicAngle 0
>    /Ascent 929
>    /Descent -230
>    /CapHeight 916
>    /StemV 80
>    /FontFile2 4 0 R
> >>
> endobj
> 
> 7 0 obj
> << /Length 383
>    /Filter /FlateDecode >>
> stream
> x?]??n?0E?H??????)BJ?F????LR?? ?,??
{iUu:??x?=?f????W??o?Bzul\???^}%? ??
?6?n?????e??_?.???????*?????K?oj?????a????wR??M????u_r??8?\?r
k>??sy!?~_M?????:Q???Um-??????$a???\?v?<???w??Y?c?Y?1Z?q??? ??# ?0????`??
??$,
k?=X`H[??<r??w;??	hG?'??IQ@??}2???
h??0??}Rt?'?M>}4}2
:??4}??M?]?X0??h???.????8?3F?w?????a?18??4N~??k;?M?oP??endstream
> endobj
> 
> 8 0 obj
> << /Type /Font
>    /Subtype /TrueType
>    /BaseFont /CAAAAA+GillSansMT
>    /FirstChar 0
>    /LastChar 34
>    /Widths [ 1000 250 479 500 384 277 729 426
>      770 219 437 500 500 280 500 500
>      500 500 823 395 426 416 333 551
>      666 509 219 323 500 323 458 250
>      500 719 437 ]
>    /FontDescriptor 6 0 R
>    /ToUnicode 7 0 R
> >>
> endobj
> 
> 9 0 obj
> << /Length 10 0 R
>    /Filter /FlateDecode
>    /Length1 9292
> >>
> stream
> x??:{|?U??~?$????N??|i(CI???j5?/???R?E?I???<Z??K?L????*?:??
?t??@??3?"??:+???(?3B???_Buw~???????{????9?:???H?6"VE??}w???_!?

?w????A??x??m????\0!D?!??|???9ew?!?L d??
?4
> g6+r??

???h?@?
hOm^?y??VM?C{?????????D(#???"w??k?e??mqudUt?R???1?m?
?1???kok??=?????A??
?0|?G(G????B?JSk?:^??&??j??;22?8EW???a?R???F?g??]?/M???@????^????5?????#4??yY?/??>?~?????i???a??????????~'??V???K???_
??y?
????F???8
E?VlD?P?P?????
> f?}?y???3<WN?"gZ?Tw?KtN??p??mV??d4?^????TJ?24
?????
?+<??U??j?_?N?????2\6???E_kg~?=e?}C????r??!T?N??@?l\'?U4??+b	{Yc8+????????"E???:??]M?????
Us???k??P?W
??R?;#a?$??
> -??@w9?#?/G?'?m???e?0c?	?,???c?`$??C3??o
P}??it7F???"@?!DgW4?9V7?	6????b?????9??
V}k?t??j?\?
	?	?'q
????????I???OL??????.R???????
> 7l?U??+6o??$O)
4?[??-BgE????i?*? O?h?D??????FwEc??4?{Y"X#W?fI?? ???.???#?<.?s%
=???????;?j??	?z?????H(?
6H?
bU??a?lRDg????????0???rU???b??(?????.???z?l?sD?Jwe????-V???#???????4~[EN??
U?G
???u	!???????
8\??K??KM&????
)????
> ??jj]"???:????5?'kbH`??A?)?EgO??,
?\?:???
??7?&?"?w<??^?#LF?]1?LF6^?\
v?)??0jN(?M????X?|U[???hr<a,??
T]?
4??<p?KV?Wx?A	/??'??
s????
<??"????????V??Ir?(r?Ap??B.?K?
??/6??F?F??\M|?
/????0?q'6???e??4e?i?e
l6KY?b??8??N??0???
A"??V?a??
O?n?{h????v?7d(.??@I?P(??	??3=}??????*?O
???????;w?/???????b
?w?-:??i???v1g _

?Z??z?4???<O
?x%?P? ????;^????~??K?>/
> ????<lv?M????????????]??
?KW|/~?X
???K?+o*:}???x?*|D:
?Zd?}H?x47??
> Z,E???P??????V??????\??j??N???h??A
????W{?????
> gQ y<?y?Y
~D)BzZ.+?????X:??%???'???f?4??P?@
?H0??`???????
??E??VW???ZmRc?Z?C?TZ?(gH?sI?Z?Cz?+?k??lN??ly?:
????af??&?`?d?,R?"?`?l???B?????d2???b???74???(?;?cc????t?b?g????C!?7????&???Z0?h
(
> ??,2??A??F??M:?k??JO{f?M?????:?.???1??????????H?m????N??Z????i?;]????oh???Yu?9???[^L4?????+???????k??D?&>ffB??GT?[???????AH???
?`P	???L?j
T	????k??J???Q?p~?? ???0|d??????<???P?,??!
?la?4wc:p?o?+?v????_?z??G?x???'p??
X??W?Ez???~??(??^0?}@#?2??B?3??ax???u#?p
N?|???~??g????Q???MWwT?.]?M:M'?O?k????	??L?
> ?0x?G??-? ?T)?-???F?F?]???<uP???S???VA??w?Vd??KDz
?D??p????J_H??J???????k??7?????+O????}8???N????#?M??\?<?
?????4?BqR?f?h???+8?q?d?k??F?7v ?????q4g????i?TX?r

?c???b?V?q?0?v?P%}:??X???.r??5?????1??
??Pm?K??<U+m?????F?A?t?v?	????????
???W??b???/Zx??(p??.4hs?F?WO%??i4??
> ?R	Z?P3i?Q???XR?ME??????d{?t?F?M?BBs4??IK{L+?????p?B?R@6p??`???MK?xY(]?>????R_???x?V??b?n????/??[?k???<8??}???6???v+M?!???V?????=^f?&???????%?t??
?|?s
> R??????{?9ob?4???}??%????y7?]???E????>?/-i?	??'c@?????&
?q?[e???????W?7Z?~^,6?????c?67?M-????}?y??????????|/=l7????*J??M8?1?J`_??????????B=!??B???O?tv
???,???7???IwI??O???\
k?????????%?????w??8??,?4??PT`??nf????|????S'??i:N??4?n?G??????O??o?????AT??????6????g'F??I??m?D:r??d??)?Z?????????K?U??C4?5?0??*M?^??6#C??`???GN?I9{??N?B$???M?^pq%B???q,?x?
9??*?.??E????epIW?v??5??=?w????v?????????6
??????.niX?~???????Fui??Y??????Ga??|?????
?*?m??
?????{??M\;"_???Ia??&?e?X?i?xo???
> ??8?u?tO_??e]O?M Xn????g????e??+?yUl?2V????t3???`)?X??A(,S??"???????xI???M%3C???Z??*_T2?B???b?Z-8h?Y%???,M?"A@c??ac?0?5?C?</???$???`M? ?M?????f??)I?!??DZk?lIz??g???MJ??
???,???h?A?H??n(g?
?}4s`??\<c?????||?=??m?????|?1{????????t????[6?	????p?\?7h????T??????t;????Z#?:(2?W
> ????Fz???+?*F???F???v#???4?n?;??,?????i????)?i??'\??
g???*?f
> &H??O?I?f??YS?0+?~???
> 
????E?xn???^??N<?Y???:??wf]1????-???.[?i?
m?G????j???`f??o????
=!O@??'??&?Z?????k??????<??J{????? ??????????Y???????k?????^8?!&_????N|LOSi^%?4Q0?<b?|\1?kA.2???R@???n|?,???^?g6<??????z?4?}?????D9F?
H???e???n????*JT(l???4?1e2y?P?5?????7?pfl??2F?<Cg??J%????$%TX')??$?R??:?Y?'??uT:????f??????$?Y????_>0??????w?A????;?	
????V???+?;?FC???? ?,?Bc?'??o?$?jJ"8????bFX?gqhmp????4?z????x|;?@?K3?+,gbY??
> F&??!<?(?3
?(??,???h{SO'???N??u

> ?d??.v????kO>???n0???+??x-????	?h&????=???1?w?w<?O?2?4???{??RphV
o???Y3?
!$??z????{UG?I'?et????k??b?U?:.?~y?C?e????/7u??H?{a??_?????9??o????z?_/?)???h0????7????J??+??.??????10a?O?\_??{;~!??k"6????G??S?????
a?9?'?)Pqp
> ?AI?P????<??X

> P`?!?
Q??pJ?$6c?
???n)??X??????q????????T??y???;(???*?4?
> ?@?K?`???? ??Td??P? +?M???+????????<?N?$?n!9??;??RIb?&=?/?n???(????ts[??????z`?2l????P????
?S?g?]??????A???) N?_???QD???4E?2$?{<???????dS?O?Q???A?mw?
N(}??3??U3q??p???@?
????&?????
H?`^?h?c at d? ??8t???????m(??Cm??Z)?(??kBr??"W?1?o???f?n|??????m?Er`YK?A?^?Vo
Q_J3<X??W??	?PW???#F???s?y?????A?y???y????L$????z?>????[?????????uRK.V?????A\4?`p?i;e?7??1Q?_Q??KH?k?4yT??J?(?ZC?19?_?
IC*(D?????????h?n??
?>????1)?3??r????\V}?A?
id\?????L=?;bu???T2?k
:?77s??N?y/?t????)???????d????????????R5?+{?Z??DuT????????
y?9??k???7$??m
~u_?9R'9p?Uo^??`??4]???<U?w+y??U????P|?w????p??Ny?f1*fZ?z?R???<(???=
> ???0?
?%\??P9s??a>?2???v???$?3!xaN?c???
????
???\??????Z?&?.?Q
@?{???
??????^Ao???'?f? `?`?q??F?q
B???QlS<?xYiW^????y?????t?"b(??
y? ????EF??IY?L??+t$
Sp!??i??N?p???)?
????!

UW???	?06???wR8F6??)?BJZH?4?M?R8??????Yt{
> ???????-?-?u???6??????????=???S?i??[W?v?k??e??m????X?j1??8???????+Eyv??
????
m?)^??E??
??X?;?#??U??bk?????XC??*?N???f?c
??v?*?Zl??wF?n?j?u4????????kJ[W6N??+~uH$c??X
m? ??f???
pj~??Y!?Jf.???l??.3?
,v9@'??(???v??emh
j?g5C??j??B??Vt?x??S?v?I?w$3D??????rSX
?	?s?J??_??CnE??B}?L
?y
?H?]???????????N??F??
> ?v??ZQ??D?ZX??
'????^^A([.??)???UL^? ??%?-?
?????n???~??
??????0????~?????u?b???I^}@M^j?
)^??????Y?????$;?N??R>
> A???m?=m'0:!???<????(F#??8?7??????-CS?/?M?S?>?+?
??=???-W???s??s???
t9??Z???x??dO?38?rGm???^??7^???????????)t??-N?'?gc??????o??
??sS??d??d?nqtY?;-?K?eX??????k??V?ce?}?j?c?????????????3;?b?h??m??I????.?
?
?
|? ??	???w?R?sWH?
?
?v?m?(????U:??????
?Q:?
|?[???????["7+?a??P, O?2?|
A??"???l.0f?y?Y?3???\?????L??\?J??????
??l>??]??????????f?Uk0?????h?:
??#?B??V?0?q\?t?W)?t???f+?U~?0?G?kJF?????3Y??y?'?U??
??{u????cT?`?SP???Z;??d8.??{???xc|?6?$VW??L4?_T?h??K?rOf
?????d??	??|?j??F?FN*M6????
?????????
v??w{?d
> endstream
> endobj
> 
> 10 0 obj
> 6200
> endobj
> 
> 11 0 obj
> << /Type /FontDescriptor
>    /FontName /BAAAAA+GillSansMT-Bold
>    /Flags 4
>    /FontBBox [ -176 -229 1165 929 ]
>    /ItalicAngle 0
>    /Ascent 929
>    /Descent -230
>    /CapHeight 929
>    /StemV 80
>    /FontFile2 9 0 R
> >>
> endobj
> 
> 12 0 obj
> << /Length 383
>    /Filter /FlateDecode >>
> stream
> x?]?Mo?@??$??=???
M?EM<?#??
?%)Y???/?/????;3;??x?a{0u??w?????T??????R?Q??q

??.?;?W6E?:????.?4sj?z?:JyC???75?T?Q???f+??9??W?s)?v??4bz??N??JNc???{-Q
???j????|H??y?D\???l+?tE)?0gq????j????#???.?u<??

????Q??? ?+???"B??@???EX?
?m??<BV?X`?r??v?ao{v?G?>
?5}
??&???L>hG?'????v4}?=?>1?>1???IX`?ai??P???3}?u@??'?\0????????????Wk?
?cp????<??k;?M?_,???endstream
> endobj
> 
> 13 0 obj
> << /Type /Font
>    /Subtype /TrueType
>    /BaseFont /BAAAAA+GillSansMT-Bold
>    /FirstChar 0
>    /LastChar 34
>    /Widths [ 1000 719 405 270 541 551 448 277
>      770 676 884 551 270 551 801 530
>      583 426 604 500 583 958 270 509
>      500 594 583 520 333 583 270 509
>      583 551 583 ]
>    /FontDescriptor 11 0 R
>    /ToUnicode 12 0 R
> >>
> endobj
> 
> 14 0 obj
> << /F1 13 0 R
>    /F2 8 0 R
>    >>
> endobj
> 
> 15 0 obj
> <<
>    /Font 14 0 R
>    /ProcSet [ /PDF ]
> >>
> endobj
> 
> 16 0 obj
> << /Type /Page
>    /Parent 3 0 R
>    /Resources 15 0 R
>    /MediaBox [ 0 0 842 595 ]
>    /Contents 1 0 R
> >>
> endobj
> 
> 3 0 obj
> << /Type /Pages
>    /Resources 15 0 R
>    /MediaBox [ 0 0 595 842 ]
>    /Kids [ 16 0 R
>            ]
>    /Count 1
> >>
> endobj
> 
> 17 0 obj
> << /Type /Catalog
>    /Pages 3 0 R
> >>
> endobj
> 
> 18 0 obj
> << /Author <FEFF004A0065006E0073002000480061006D0069007300630068>
> /Creator <FEFF0044007200610077>
> /Producer <FEFF0053007400610072004F0066006600690063006500200037>
> /CreationDate (D:20060817201019+02'00')
> >>
> endobj
> 
> xref
> 0 19
> 0000000000 65535 f
> 0000000017 00000 n
> 0000001815 00000 n
> 0000017415 00000 n
> 0000001842 00000 n
> 0000008668 00000 n
> 0000008693 00000 n
> 0000008932 00000 n
> 0000009397 00000 n
> 0000009754 00000 n
> 0000016060 00000 n
> 0000016086 00000 n
> 0000016331 00000 n
> 0000016797 00000 n
> 0000017162 00000 n
> 0000017218 00000 n
> 0000017285 00000 n
> 0000017553 00000 n
> 0000017613 00000 n
> trailer
> << /Size 19
>    /Root 17 0 R
>    /Info 18 0 R
> >>
> startxref
> 17844
> %%EOF

> Database Tables
> ===============
> 
> New tables
> ----------
>     vtiger_orgunit
> 
> 	Description:
> 	    Defines a oranizational unit
> 
> 	Columns
> 	    orgunitid		serial NOT NULL
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    type		character varying(30)
> 	    name		character varying(60) NOT NULL
> 	    address		character varying(150)
> 	    city   		character varying(100)
> 	    state  		character varying(100)
> 	    country		character varying(100)
> 	    code   		character varying(30)
> 	    phone  		character varying(30)
> 	    fax    		character varying(30)
> 	    website		character varying(100)
> 
> 	Constraints:
> 	    vtiger_orgunit_pkey
> 		PRIMARY KEY (orgunitid)
> 
> 	    fk_1_vtiger_orgunit
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_orgunit_name_idx
> 		ON vtiger_orgunit
> 		USING btree (orgid, name)
> 
> 	    vtiger_orgunit_type_idx
> 		ON vtiger_orgunit
> 		USING btree (orgid, type)
> 
> 
>     vtiger_orgunittype
> 
> 	Description:
> 	    Defines the values to be entered into vtiger_orgunit.type
> 
> 	Columns:
> 	    orgunittypeid	serial NOT NULL
> 	    orgunittype		character varying(30)
> 	    sortorderid		integer DEFAULT 0 NOT NULL
> 	    presence		integer DEFAULT 1 NOT NULL
> 
> 	Constraints:
> 	    vtiger_orgunittype_pkey
> 		PRIMARY KEY (orgunittypeid)
> 	
> 	Indices:
> 	    vtiger_orgunittype_type_idx
> 		ON vtiger_orgunittype
> 		USING btree (type)
> 
> 
>     vtiger_user2org
> 
> 	Description:
> 	    Defines a list of organizations a user may work for
> 
> 	Columns:
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    userid		integer	NOT NULL DEFAULT 0
> 	    primary		boolean DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_user2org
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_user2org
> 		FOREIGN KEY (userid)
> 		REFERENCES vtiger_users(userid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_user2org_orgid_idx
> 		ON vtiger_user2org
> 		USING btree (orgid)
> 
> 	    vtiger_user2org_userid_idx
> 		ON vtiger_user2org
> 		USING btree (userid)
> 
> 
>     vtiger_user2orgunit
> 
> 	Description:
> 	    Defines a list of organizational units a user is
> 	    assigned to
> 
> 	Columns:
> 	    orgunitid		integer	NOT NULL DEFAULT 0
> 	    userid		integer	NOT NULL DEFAULT 0
> 	    primary		boolean DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_user2orgunit
> 		FOREIGN KEY (orgunitid)
> 		REFERENCES vtiger_orgunit(orgunitid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_user2orgunit
> 		FOREIGN KEY (userid)
> 		REFERENCES vtiger_users(userid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_user2orgunit_orgid_idx
> 		ON vtiger_user2orgunit
> 		USING btree (orgunitid)
> 
> 	    vtiger_user2orgunit_userid_idx
> 		ON vtiger_user2orgunit
> 		USING btree (userid)
> 
> 
>     vtiger_entity2org
> 
> 	Description:
> 	    Assignes entities to particular organizations
> 
> 	Columns:
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    crmid		integer	NOT NULL DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_entity2org
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_entity2org
> 		FOREIGN KEY (crmid)
> 		REFERENCES vtiger_crmentity(crmid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_entity2org_crmid_idx
> 		ON vtiger_entity2org
> 		USING btree (crmid)
> 
> 	    vtiger_entity2org_userid_idx
> 		ON vtiger_entity2org
> 		USING btree (userid)
> 
> 
> Changes
> -------
>     1.  vtiger_campaing should be a vtiger_crmentity
> 	-> Add the following constraint to the database
> 
> 	    fk_r_vtiger_campaign
> 		FOREIGN KEY (campaignid)
> 		REFERENCES vtiger_crmentity(crmid)
> 		ON DELETE CASCADE
> 
> 	-> Provide a migration script for already stored campaigns
> 	
> 
> PHP changes
> ===========
> Administrators Role
> -------------------
>     1.  Settings -> Company Details
> 	- ListView
> 	- Add
> 	- Delete
> 	- Change
> 
>     2.  Settings -> Users
> 	- User is a member of one or more companies
> 	  (implement like the group membership assignement)
> 	- Assign one main company to the user (out of the 
> 	  membership list).
> 
> CEO Role
> --------
>     1.  Settings -> Company Details
> 	- Change deatils only for the companies, the user has a 
> 	  CEO role for
> 
>     2.  Settings -> Company Unit
> 	- ListView
> 	- Add
> 	- Delete
> 	- Change
> 	
>     3.  Settings -> Users
> 	- User is a member of one or more organization units
> 	  (take care to provide only those units of organizations/
> 	   companies to which the user already is assigned).
> 	- Assign one main orgunit to the user (out of the 
> 	  membership list).
> 
> Standard user role
> ------------------
>     1.  login scheme
> 	After the login the authenticated user gets another 
> 	window which lets him select the organization/company
> 	he's going to act for in the new session.
> 
> 	Open item: Skip this second login step if there's only
> 	one organization assigned to that user?
> 
> 	My proposal:
> 	    For the time being: yes. 
> 	    This would be subject of further FCRs (like book-
> 	    keeping - booking date selection on login).
> 
> 	Open item: Display the organization selection somewhere
> 	during the entire session?
> 
> 	My proposal: yes, upper right corner with the user name
> 
>     2.  Assignment of entities to exactly one company/organization
> 	This affects:
> 	- Quotes
> 	- Sales orders
> 	- Invoices
> 	- Price Books
> 	The company assignement is taken from the selection, the
> 	user did during login.
> 
>     3.  Assignment of entities to more than one company/organization
> 	This affects
> 	- Leads
> 	- Accounts
> 	- Contacts
> 	- Potentials
> 	- Products
> 	- Campaigns
> 	To the modification/add forms another list entity is to
> 	be added. This list fills the crmentity2org table. Users
> 	may add/delete entries to/from this table.
> 
> 	Open item: May this table be empty?
> 
>     4.  Assignment of entities to orgunits
> 	This affects:
> 	- Quotes
> 	- Sales orders
> 	- Invoices
> 	- Price Books
> 	The company assignement is taken from the selection, the
> 	user did during login.
> 
>     5.  PDF generation
> 	Addresses to be takenout of the organization table according
> 	to the organization reference of the affected entity.
> 	Addresses may be overridden by orgunit references.
> 
> General
> -------
>     1.  The role assignments shown above results in permissions
> 	to be maintained.
> 
>     2.  Do we use the term 'company' as in the GUI or 'organization'
> 	as in the database? (No preferences from my side ... only
> 	that there should be a common understanding).
> 
>     3.  Should there be a more sophisticated relationship between
> 	entities and organizations (also orgunits)? May like
> 
> 	    If a product is assigned to company A and B:
> 	    May both companies change product details or should
> 	    there still be an ownership assigned to one of the
> 	    companies?
> 
> 	This could be done using flags in the entity2org table
> 	but would result in more sophisticated GUI operations.

> _______________________________________________
> Get started with creating presentations online - http://zohoshow.com?vt 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      




From jeri at vtiger.com  Wed Nov 15 07:24:21 2006
From: jeri at vtiger.com (Jeri John)
Date: Wed, 15 Nov 2006 17:54:21 +0530
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
Message-ID: <10eeb932d91.-1068791366129115790.2050524429825132071@@vtiger.com>

Dear James, 
 Thanks for your fix.We have integrated it and it is available in the SVN. 
 
Thanks & Regards, 
Jerry.




---- James Tillman&lt;jamestillman at sevatechnologies.com&gt; wrote ---- 

 ((If someone would fix the forums registration, I'll gladly start posting these issues on the forums if this is not the correct venue.&nbsp; Until then, I assume reporting in some way is better than not reporting at all.)) &nbsp; modules/Emails/Emails.php seems to be lacking some key class-level fields.&nbsp; Namely, these: &nbsp; var $rel_users_table = "vtiger_salesmanactivityrel";var $rel_contacts_table = "vtiger_cntactivityrel";var $rel_serel_table = "vtiger_seactivityrel"; It makes use of these fields in its code, as in the function set_emails_contact_invitee_relationship(), but they are not set anywhere in the class. &nbsp; This problem comes to light when you attempt to use the Outlook plugin to link emails to a vtiger contact.&nbsp; You get the typical "Invalid return value from vtigerCRM" error message. &nbsp; I inserted the lines mentioned above at line 38 in Emails.php and Outlook email linking started to work. &nbsp; Most of the Outlook interaction with vtiger in&nbsp;v502&nbsp;seems to be sadly broken out of the box. &nbsp; By the way, anyone thought of improving the Outlook plugin to do something other than stupidly report that vtiger returned an invalid response?&nbsp; Having to use Fiddler or some other HTTP inspection utility to just to find the PHP error message from vtiger is time-consuming. &nbsp; jpt _______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061115/5a0a92eb/attachment-0001.html 

From philip at vtiger.com  Thu Nov 16 10:30:25 2006
From: philip at vtiger.com (Philip)
Date: Thu, 16 Nov 2006 21:00:25 +0530
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
 and general column layout
In-Reply-To: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
References: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
Message-ID: <10ef163e45a.3319490668445686029.-7775633052489133351@@vtiger.com>


Hi Niel,

Thanks for your effort in resolving the UI issue we'll test your filesin out test bed and check-in into the 5.0.3 repo if everything is fine,else we'll get back to you if we face any issue.

Regards,
Philip



---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au> wrote ---- 

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061116/92aed265/attachment-0001.html 

From dgrant at accuratetechnologies.com  Thu Nov 16 10:41:34 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Thu, 16 Nov 2006 10:41:34 -0500
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
	and general column layout
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.com>

I actually "solved" this problem a different way:

 

I have now explicitly wordwrapped all multi-line textareas to 80 chars,
both with WRAP=HARD and with a counting/wrapping function on the backend
(AJAX doesn't seem to support WRAP=HARD)

 

This way, the text entered in the textarea and the text returned from
the database wrap the same - what you see is how it is stored.

 

It's a lot simpler, and it works with AJAX.

 

DG 

 

  _____  

From: Philip [mailto:philip at vtiger.com] 
Sent: Thursday, November 16, 2006 10:30 AM
To: vtigercrm-developers at lists.vtigercrm.com
Cc: vtigercrm-developers at lists.vtigercrm.com
Subject: Re: [Vtigercrm-developers] Files to fix word wrapping of long
items and general column layout

 


Hi Niel,

Thanks for your effort in resolving the UI issue we'll test your files
in out test bed and check-in into the 5.0.3 repo if everything is fine,
else we'll get back to you if we face any issue.

Regards,
Philip



---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au>
wrote ---- 

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems
do
not wrap correctly and resizing the browser window doesn't help. See
ticket my #2564 and others. I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well;
wrapping
correctly when the user chooses to alter the width of his or her browser
window. In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's
and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo". Both of these now have a width
setting
that you can play with. You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected
because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in
lots
of places such as Change Password and Data Migration. This means that
I've
ended up tweaking (and fixing some bugs in) lots of tables. Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views". A Detail View shows the details for one item,
e.g.
a Contact, a Quote etc. Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory
tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting. These
now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View)
such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of
course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of
a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***. I've only
giving
you a new style.css for Blue Lagoon (any other theme will look a mess
with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you
can!

4) Now resize your browser window and check that everything wraps
neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css. This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these
files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been
used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View. This is causing confusion. For example there are multiple
styles defining the same heading of different tables both using Detail
View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having
four
columns: Label, Data, Label, Data. The headings for many different types
of tables are substantially identical. Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell
level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align". The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout. Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored
with
the link information for the image. Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells. In the
past
they used to be required to ensure a cell would display properly. If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left
aligned),
e.g. <td>{$data}&nbsp;</td> NOT <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of
these
changes. I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful. I spent a reasonable time
reformatting. (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061116/84365744/attachment-0001.html 

From neil.temperley at exemail.com.au  Thu Nov 16 18:59:38 2006
From: neil.temperley at exemail.com.au (neil.temperley at exemail.com.au)
Date: Fri, 17 Nov 2006 10:59:38 +1100 (EST)
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
 and general column layout
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.co
	m>
References: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.com>
Message-ID: <4257.203.143.170.20.1163721578.squirrel@webmail.exetel.com.au>

Hi Dennis,

Basically what I did was reduce the number of hard wired overrides to the
default style to a minimum and I also eliminated nowraps.  A nowrap on one
cell will often affect a whole column.

Since a 4 column "Detail View" is a standard table layout, I was able to
move the column width info into style.css.  This gives a knowledgable user
nice control over the relative column widths of a "Detail View" by
tweaking column width settings.

But the biggest gain is that all columns resize correctly to the window
width of the user's browser.  This is really nice.  Any user can resize
the window to suit their preference and the columns self adjust and wrap
accordingly.

Since the browser does the wrapping work it works with AJAX (and
multibyte) without additional coding.

Finally I was able to maximise the space for Notes and Descriptions etc by
getting them to span the full row.


BTW, several months back I helped implement code to force a wrap of
Multi-select combo box lists in Smarty, but this (as you know) required a
matching JavaScript fix for AJAX as well.  I always felt this was a
kludge; a hardwired column width that ignores the users browser window
should be avoided if possible.  With the new files I removed the 'kludge'.

regards,
Neil

> I actually "solved" this problem a different way:
>
>
>
> I have now explicitly wordwrapped all multi-line textareas to 80 chars,
> both with WRAP=HARD and with a counting/wrapping function on the backend
> (AJAX doesn't seem to support WRAP=HARD)
>
>
>
> This way, the text entered in the textarea and the text returned from
> the database wrap the same - what you see is how it is stored.
>
>
>
> It's a lot simpler, and it works with AJAX.
>
>
>
> DG
>
>
>
>   _____
>
> From: Philip [mailto:philip at vtiger.com]
> Sent: Thursday, November 16, 2006 10:30 AM
> To: vtigercrm-developers at lists.vtigercrm.com
> Cc: vtigercrm-developers at lists.vtigercrm.com
> Subject: Re: [Vtigercrm-developers] Files to fix word wrapping of long
> items and general column layout
>
>
>
>
> Hi Niel,
>
> Thanks for your effort in resolving the UI issue we'll test your files
> in out test bed and check-in into the 5.0.3 repo if everything is fine,
> else we'll get back to you if we face any issue.
>
> Regards,
> Philip
>
>
>
> ---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au>
> wrote ----
>
> Dear vtiger developers,
>
> please find attached a gzipped tar file of changes I'm suggesting to the
> vtiger user interface to cope with the problem that long item problems
> do
> not wrap correctly and resizing the browser window doesn't help. See
> ticket my #2564 and others. I've made these corrections to SVN 9765.
>
> In particular my aim was to make all "Detail Views" format well;
> wrapping
> correctly when the user chooses to alter the width of his or her browser
> window. In particular I wanted to ensure that fields such as Comments,
> Notes, Description, Terms & Conditions, Mailing Street and Multi-select
> Combo Boxes worked correctly with long items regardless of window width.
> Also, I've ensured that these wide items (including Contact Image (i.e.
> Photo)) now span multiple columns to provide a neater layout.
>
> With these changes, the user has significant control over column width's
> and
> layout in Detail Views by altering the two classes in the style.css file
> ".dvtCellLabel" and ".dvtCellInfo". Both of these now have a width
> setting
> that you can play with. You can choose values that give you column
> proportions pretty similar to vtiger's existing proportions, or you can
> choose values that enable more data to be fitted to the screen.
>
> Unfortunately, to implement these changes many files were affected
> because
> these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in
> lots
> of places such as Change Password and Data Migration. This means that
> I've
> ended up tweaking (and fixing some bugs in) lots of tables. Where
> reasonable I've tried to replace the use of these with the more generic
> .cellLabel and .cellInfo.
>
> Some of the "tables" affected are as follows.
>
> 1) All "Detail Views". A Detail View shows the details for one item,
> e.g.
> a Contact, a Quote etc. Detail Views are found in Contacts, Leads,
> Potentials, Accounts, Notes, User and all the items under the Inventory
> tab,
> e.g. Quotes and Invoices.
>
> 2) The Advance Filter tables used in Custom View and Reporting. These
> now
> resize well and can accept long "OR" combinations of search strings.
>
> 3) Odd places (which in my mind do not really constitute a Detail View)
> such
> as Change Password, Convert Lead, Calendar and Data Migration.
>
> Files most affected are:
> DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of
> course.
>
>
> How to proceed.
>
> 1) Untar the archive files into your vtigercrm root directory on top of
> a
> SVN 9765 version.
>
> 2) Log-on to vtiger using the *** Blue Lagoon Theme ***. I've only
> giving
> you a new style.css for Blue Lagoon (any other theme will look a mess
> with
> no word wrapping)!!!!
>
> 3) Edit a Contact and create lots of long entries in every field you
> can!
>
> 4) Now resize your browser window and check that everything wraps
> neatly.
>
> 5) If you want to play with the layout: in themes, open
> bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
> For experts, you may want to copy bluelagoon/style-developer.css to
> bluelagoon/style.css. This will give you a fairly ugly colour scheme but
> will clearly show the places that have been affected by my changes.
>
> 6) Note I reformatted the indentation of portions of the code in these
> files
> where I thought indentation was poor or hard to follow.
>
>
> Some of the things that I have learnt through this process.
>
> 1) There are multiple style classes used in vtiger and some have been
> used
> inconsistently.
> One problem is that there is no clear definition of what constitutes a
> Detail View. This is causing confusion. For example there are multiple
> styles defining the same heading of different tables both using Detail
> View
> style classes, e.g. .detailedViewHeader and .dvInnerHeader.
>
> I'd like to suggest that we restrict Detail View tables to those having
> four
> columns: Label, Data, Label, Data. The headings for many different types
> of tables are substantially identical. Rather than create new style for
> every situation or table, it is probably best to minimise the number of
> styles and use generic names such as .headingLevel2 or .selectBox where
> possible.
>
> 2) Note that HTML statements such as <table class='small'> or <tr
> class='small'> don't seem to propagate the font style down to cell
> level.
> I'm not sure why not.
>
> 3) Note also that an HTML statement like:
> <td align="left" class="txtBox">
> may not do what you want since the class setting always takes precedence
> over the "align". The better choice is this
> <td style="text-align:left;" class="txtBox">
> which will always work.
>
> 4) One nowrap type item in a table cell can turn off wrapping for the
> **whole column** of data and ruin the layout. Avoid using nowrap!
>
> 5) I couldn't resize images since the HTML sizing seems to be stored
> with
> the link information for the image. Photos are too large by default.
>
> 6) I don't think &nbsp; codes are required in empty data cells. In the
> past
> they used to be required to ensure a cell would display properly. If you
> need to include one, put it **after** the data not in front so that the
> alignment of the data is not disturbed (assuming the data is left
> aligned),
> e.g. <td>{$data}&nbsp;</td> NOT <td>&nbsp;{$data}</td>.
>
>
> Please let me know if you find any formatting disasters as a result of
> these
> changes. I've tried this with Firefox 1.5 and IE 6.0.
>
> I tried hard to be neat and careful. I spent a reasonable time
> reformatting. (Yes, I spent way way too long on this :-))
>
> Best regards,
> Neil
>
> Neil Temperley
> Skype: neil.temperley
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com




From Dirk.Gorny at genion.de  Fri Nov 17 04:48:57 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Fri, 17 Nov 2006 10:48:57 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
Message-ID: <200611171048.58005.Dirk.Gorny@genion.de>

Am Montag, 6. November 2006 17:57 schrieb Dhr. R.R. Gerbrands:

> @Dirk, could you give us your idea's on more specific improvements,
> compared with openCRX?

For sure, at first it is supports high class DBMS like DB2, Oracle, and 
MS-SQL.
- openCRX is a completely i18n application with many supportet languages. 
English, German, Spanisch, Chinese, French, Polish , Portuguese, Russian, 
Swedish, Turkish, and Farsi are included.
- For integration it supports RMI, CORBA, JMS, JCA.
- You need only one deployment and one set of tables to manage a hundred of 
different mandators.
- there is the possibility to export and import complex objects with their 
substructure in XML.
-You can sync Offline/Mobile Client and Server.

These are only a few things. The most you can see at 
http://www.opencrx.org/tour-features.htm.

Depending on the architecture (J2EE, OMG/MDA) they work with a core team 
consists of 3 people.

Best regards,

Dirk


From naterajj at hotmail.com  Mon Nov 20 14:00:47 2006
From: naterajj at hotmail.com (Juan Natera)
Date: Mon, 20 Nov 2006 11:00:47 -0800
Subject: [Vtigercrm-developers] Adding another asigned user's field to the
	Lead's Module
Message-ID: <BAY116-F30A4A860B57C70A6348D96C2ED0@phx.gbl>

Hi,

I need to have 2 users assigned per Lead, I was looking for recomendations 
on how to do this, Adding a regular custom field with users from the 
settings page won't acomplish what we want, since we need the 
notifications/reports and such to affect both users.

Thanks in advance,

Juan Natera

_________________________________________________________________
Get the latest Windows Live Messenger 8.1 Beta version.?Join now. 
http://ideas.live.com



From joe at tsolucio.com  Mon Nov 20 14:25:28 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Mon, 20 Nov 2006 20:25:28 +0100
Subject: [Vtigercrm-developers] Is the list active?
Message-ID: <1164050728.2936.34.camel@joesunix.int>

Hi,

For some time now there is very little activity on this list. The last
4/5 emails I have sent haven't been answered, fixed or commented on.

The ones I would like to know about are:

-> vtiger popup calendar start day of the week
-> new vtiger_entityname table
-> Latest news section in vtigerforge isn't updating
-> DMS

Is there another place where we should ask these questions?

Regards, Joe
TSolucio



From neil.temperley at exemail.com.au  Mon Nov 20 17:27:02 2006
From: neil.temperley at exemail.com.au (Neil Temperley)
Date: Tue, 21 Nov 2006 09:27:02 +1100
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
	andgeneral column layout
In-Reply-To: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
Message-ID: <000001c70cf3$02f2eed0$6501a8c0@Nemrut>

Dear All,

This archive has some minor fixes to two files in the version I sent
previously.  Additional altered files fix a layout issue for "Edit" and
"Create" views... now the spacing/layout of the copy address radio buttons
is improved.  (As far as I can tell these files can be dropped on top of SVN
9848 and everything works OK.)

Regards,
Neil

-----Original Message-----
From: vtigercrm-developers-bounces at lists.vtigercrm.com
[mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf Of Neil
Temperley
Sent: Monday, 13 November 2006 21:27
To: vtigercrm-developers at lists.vtigercrm.com
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
andgeneral column layout

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox">
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this <td style="text-align:left;"
class="txtBox"> which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.14.3/530 - Release Date: 11/11/06
18:53
 
    
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtiger-Neil-20061121.tar.gz
Type: application/x-gzip
Size: 85673 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/e18da66b/attachment.gz 

From g.un at freemail.hu  Mon Nov 20 18:14:30 2006
From: g.un at freemail.hu (mikozod hozza)
Date: Tue, 21 Nov 2006 00:14:30 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
Message-ID: <freemail.20061021001430.78055@fm13.freemail.hu>

Hello,

 I would need help why the example at
http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
does not work for me.
I have installed vTiger 5.2.0 on Linux box.
I put this query:
"insert into vtiger_field values( 4, '',
'event_time','vtiger_login_hist', 2, 5, 'event_time',
'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
vtiger_login_hist is my prop table., event_time is one of
its field.
Then I got some error when visiting a certain Contact:
"Fatal error: Call to a member function Move() on a
non-object in
/var/www/vtigercrm/include/database/PearDatabase.php "
This error comes from query_result function.
When I switched on debugging info it was seen that result
parameter received here was empty.
Actually I don't know what I made wrong.
The whole purpose of my experiment would be to have a
proprietary field on Contacts/More information.
I hope some one can help me here.

br,

Gabor

______________________________________________________________________
KGFB-2007 az Els? Online Alkuszt?l! K?sse n?lunk ?jra k?telez? biztos?t?s?t! 
Az ?sszes biztos?t? egy helyen, Online kedvezm?nyek, egyszer? ?gymenet.
http://www.netrisk.hu





From dan.means at teamsrs.com  Mon Nov 20 21:45:07 2006
From: dan.means at teamsrs.com (Dan Means)
Date: Mon, 20 Nov 2006 18:45:07 -0800
Subject: [Vtigercrm-developers] Is the list active?
In-Reply-To: <1164050728.2936.34.camel@joesunix.int>
References: <1164050728.2936.34.camel@joesunix.int>
Message-ID: <45626833.2030901@teamsrs.com>

I think everybody's just exhausted and busy...

Joe Bordes wrote:

>Hi,
>
>For some time now there is very little activity on this list. The last
>4/5 emails I have sent haven't been answered, fixed or commented on.
>
>The ones I would like to know about are:
>
>-> vtiger popup calendar start day of the week
>-> new vtiger_entityname table
>-> Latest news section in vtigerforge isn't updating
>-> DMS
>
>Is there another place where we should ask these questions?
>
>Regards, Joe
>TSolucio
>
>_______________________________________________
>Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
>  
>

-- 
Dan Means
Mission Viejo, CA
www.dkmeansonline.com
www.teamsrs.com



From joe at tsolucio.com  Tue Nov 21 04:08:59 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 10:08:59 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021001430.78055@fm13.freemail.hu>
References: <freemail.20061021001430.78055@fm13.freemail.hu>
Message-ID: <1164100139.10220.3.camel@joesunix.int>

The second value of your insert is an empty string. It should be a
numeric value obtained from the function getUniqueID("vtiger_field").


El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> Hello,
> 
>  I would need help why the example at
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> does not work for me.
> I have installed vTiger 5.2.0 on Linux box.
> I put this query:
> "insert into vtiger_field values( 4, '',
> 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> vtiger_login_hist is my prop table., event_time is one of
> its field.
> Then I got some error when visiting a certain Contact:
> "Fatal error: Call to a member function Move() on a
> non-object in
> /var/www/vtigercrm/include/database/PearDatabase.php "
> This error comes from query_result function.
> When I switched on debugging info it was seen that result
> parameter received here was empty.
> Actually I don't know what I made wrong.
> The whole purpose of my experiment would be to have a
> proprietary field on Contacts/More information.
> I hope some one can help me here.
> 
> br,
> 
> Gabor
> 
> ______________________________________________________________________
> KGFB-2007 az Els? Online Alkuszt?l! K?sse n?lunk ?jra k?telez? biztos?t?s?t! 
> Az ?sszes biztos?t? egy helyen, Online kedvezm?nyek, egyszer? ?gymenet.
> http://www.netrisk.hu
> 
> 
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 



From joe at tsolucio.com  Tue Nov 21 04:10:14 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 10:10:14 +0100
Subject: [Vtigercrm-developers] Is the list active?
In-Reply-To: <45626833.2030901@teamsrs.com>
References: <1164050728.2936.34.camel@joesunix.int>
	<45626833.2030901@teamsrs.com>
Message-ID: <1164100214.10220.4.camel@joesunix.int>

Ok, that's normal. At least I know I am on the right list :-)

Thanks, Joe
El lun, 20-11-2006 a las 18:45 -0800, Dan Means escribi?:
> I think everybody's just exhausted and busy...
> 
> Joe Bordes wrote:
> 
> >Hi,
> >
> >For some time now there is very little activity on this list. The last
> >4/5 emails I have sent haven't been answered, fixed or commented on.
> >
> >The ones I would like to know about are:
> >
> >-> vtiger popup calendar start day of the week
> >-> new vtiger_entityname table
> >-> Latest news section in vtigerforge isn't updating
> >-> DMS
> >
> >Is there another place where we should ask these questions?
> >
> >Regards, Joe
> >TSolucio
> >
> >_______________________________________________
> >Reach hundreds of potential candidates - http://jobs.vtiger.com 
> >
> >  
> >
> 



From alex.svetos at gmail.com  Tue Nov 21 04:41:56 2006
From: alex.svetos at gmail.com (alex svetos)
Date: Tue, 21 Nov 2006 10:41:56 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021001430.78055@fm13.freemail.hu>
References: <freemail.20061021001430.78055@fm13.freemail.hu>
Message-ID: <26debbf70611210141u4d62a48fw1a3c5f9ac3e75e68@mail.gmail.com>

> Hello,
>
> I would need help why the example at
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> does not work for me.
> I have installed vTiger 5.2.0 on Linux box.
> I put this query:
> "insert into vtiger_field values( 4, '',
> 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> vtiger_login_hist is my prop table., event_time is one of
> its field.
> Then I got some error when visiting a certain Contact:
> "Fatal error: Call to a member function Move() on a
> non-object in
> /var/www/vtigercrm/include/database/PearDatabase.php "
> This error comes from query_result function.
> When I switched on debugging info it was seen that result
> parameter received here was empty.
> Actually I don't know what I made wrong.
> The whole purpose of my experiment would be to have a
> proprietary field on Contacts/More information.
> I hope some one can help me here.
>
> br,
>
> Gabor


Hi,

I don't understand what you want to do. But if you want to add a new field
in a Contact you should do something like this :
if you want to add a new field on Contact, assuming your field ids called
'card_number' you should insert a new line in vtiger field with thoses
values :

insert into a vtiger_contact values (4, an_unused_field_id, 'card_number',
'card_number',
'vtiger_contactdetails',1,7,'card_number','card_number',1,0,0,15,0,4,1,'I~O',1,NULL,'ADV'
)

And add a the new column in vtiger_contactdetails.

(assuming your new field is called 'mobile_phone' and is used to store a
phone number.)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/a5221807/attachment-0001.html 

From sergiokessler at gmail.com  Tue Nov 21 07:54:56 2006
From: sergiokessler at gmail.com (Sergio A. Kessler)
Date: Tue, 21 Nov 2006 09:54:56 -0300
Subject: [Vtigercrm-developers] separation in calendar
Message-ID: <49216030611210454q7739413cs7bccead9f47e0098@mail.gmail.com>

in the calendar screen there is a visual separation between events of types:

Call & Meetings (left tab)
To Dos (right tab)

but the button "Add" permit to add any type of event (Call, Meeting or
ToDo event)...

why there is two tabs ?

would'n it be better if the daily, weekly views show the three events
types without any tabs ??


salute,
/sergio


From g.un at freemail.hu  Tue Nov 21 09:19:02 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 15:19:02 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164100139.10220.3.camel@joesunix.int>
Message-ID: <freemail.20061021151902.54391@fm10.freemail.hu>

hi

> The second value of your insert is an empty string. It
should be a
> numeric value obtained from the function
getUniqueID("vtiger_field").
Actually it is enough if you issue this query in mysql. I
have used this query in mysql and it always assigns a unique
value there.

> 

> 
> El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> > Hello,
> > 
> >  I would need help why the example at
> >
http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> > does not work for me.
> > I have installed vTiger 5.2.0 on Linux box.
> > I put this query:
> > "insert into vtiger_field values( 4, '',
> > 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> > 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> > vtiger_login_hist is my prop table., event_time is one of
> > its field.


___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From g.un at freemail.hu  Tue Nov 21 09:25:58 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 15:25:58 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <26debbf70611210141u4d62a48fw1a3c5f9ac3e75e68@mail.gmail.com>
Message-ID: <freemail.20061021152558.6346@fm10.freemail.hu>



alex svetos <alex.svetos at gmail.com> ?rta:

> I don't understand what you want to do. But if you want to
add a new field

Actually I have defined a new table in vtiger database
(vtiger_login_hist). I wan to make the certain contact's
last login time to be displayed on Contacts/More Information
tab.
Technically I don't know for 100% sure how this should be
achieved. This is why I bother you here on this list:)
I have made some attempt based on online documentation on
vtiger page but those were failed. And I don't know where to
start to looking for my fault.  

> in a Contact you should do something like this :
> if you want to add a new field on Contact, assuming your
field ids called
> 'card_number' you should insert a new line in vtiger field
with thoses
> values :
> 
> insert into a vtiger_contact values (4,
an_unused_field_id, 'card_number',
> 'card_number',
>
'vtiger_contactdetails',1,7,'card_number','card_number',1,0,0,15,0,4,1,'I~O',1,NULL,'ADV'
> )
> 
> And add a the new column in vtiger_contactdetails.
> 
> (assuming your new field is called 'mobile_phone' and is
used to store a
> phone number.)
> 
Did I get it right that I have to update three tables in
database for this case? These table are: vtiger_field,
vtiger_contact and vtiger_contactdetails, aren't they?

thanks for help so far!

Gabor

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From joe at tsolucio.com  Tue Nov 21 09:56:24 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 15:56:24 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021151902.54391@fm10.freemail.hu>
References: <freemail.20061021151902.54391@fm10.freemail.hu>
Message-ID: <1164120984.10220.52.camel@joesunix.int>

HI,

El mar, 21-11-2006 a las 15:19 +0100, gabor escribi?:
> hi
> 
> > The second value of your insert is an empty string. It
> should be a
> > numeric value obtained from the function
> getUniqueID("vtiger_field").
> Actually it is enough if you issue this query in mysql. I
> have used this query in mysql and it always assigns a unique
> value there.

Yes, this is because the field is defined as an auto-increment. The
problem is that this procedure does NOT update the value in
vtiger_field_seq so any new module or maybe some patches are going to
get into trouble with overwritten field values. It's OK if your sure you
are never going to add anything somebody else has done.

The correct way to do this is launch the SQL insert and then modify the
value in vtiger_field_seq accordingly.

Joe
TSolucio
> 
> > 
> 
> > 
> > El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> > > Hello,
> > > 
> > >  I would need help why the example at
> > >
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> > > does not work for me.
> > > I have installed vTiger 5.2.0 on Linux box.
> > > I put this query:
> > > "insert into vtiger_field values( 4, '',
> > > 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> > > 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> > > vtiger_login_hist is my prop table., event_time is one of
> > > its field.
> 
> 
> ___________________________________________________________
> A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
> http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm
> 
> 
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 



From oded at atelis.net  Tue Nov 21 10:24:22 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 17:24:22 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <1164122662.13078.56.camel@x-23.atelis.net>


Hi all.

I'm evaluating vTiger CRM for my company, and there are several issues
where either I don't understand how to do things using vTiger CRM or
vTiger CRM is missing important functionality (important to my company ,
anyway ;-).

If its ok, I'd like to raise these issues here - not all at once, of
course - and get some feedback, and possibly solutions to these.

I'll start with the first question then:
We've developed an in-house inventory management application to manager
our sales of hardware products - we are resellers for a company that
manufactures extension cards for PCs. Each such card has a name, model
number and a serial number, where the serial number in unique for each
item - not product.

In our own inventory application, there is a "product" entity which has
a model number, and each product has several serial number assigned to
it. Due to commercial issues with out supplier (tracking eligability of
customers for support) , we need to track each item that is shipped,
using the serial number. Whenever we receive a delivery, we go over the
boxed and add the serial number of every item under the product entity
for that type of product. When we sell a product, we remove the item
serial number from the inventory.

We are not trying to use vTiger CRM to track inventory instead, but
apparently in vTiger CRM, the product entity carries the serial number,
so each product can have only one serial number available in the
inventory. This forces us to either register each boxed item we receive
as a product or ignore the serial numbers. We can't do the latter, and
the former is problematic due to several reasons:
- Creating a product entry is complicated and time consuming - creating
500 product entries for a shipment of 500 boards takes considerably more
time then recording 500 serial numbers somewhere.
- Product views (such as "Search for product" in the invoice editor)
rarely list the serial number, so you basically get a list containing
several dozens (sometimes hundreds, depending on the item) of similar
entries and one has to guess which carries the correct serial number.
- Inventory reports listing item quantity become completely useless.

Is there a way to do what we need that I wasn't aware of ?

Thanks.

--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
Nobody takes a bribe.  Of course at Christmas if you happen to hold out
your hat and somebody happens to put a little something in it, well,
that's different.
    -- New York City Police Commissioner (Ret.) William P. O'Brien,
instructions to the force.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/062e9236/attachment-0001.html 

From dgrant at accuratetechnologies.com  Tue Nov 21 10:37:31 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 21 Nov 2006 10:37:31 -0500
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>

 

 

  _____  

From: Oded Arbel [mailto:oded at atelis.net] 
Sent: Tuesday, November 21, 2006 10:24 AM
To: vtigercrm-developers at lists.vtigercrm.com
Subject: [Vtigercrm-developers] Question about the inventory mechanism

 


Hi all.

I'm evaluating vTiger CRM for my company, and there are several issues
where either I don't understand how to do things using vTiger CRM or
vTiger CRM is missing important functionality (important to my company ,
anyway ;-).

We wrote a back-end process to update the CRM with information out of
our inventory system, including stock info, etc.

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/d414d269/attachment-0001.html 

From oded at atelis.net  Tue Nov 21 10:52:42 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 17:52:42 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
Message-ID: <1164124362.13078.61.camel@x-23.atelis.net>

On Tue, 2006-11-21 at 10:37 -0500, Dennis Grant wrote:
> 
> We wrote a back-end process to update the CRM with information out of
> our inventory system, including stock info, etc.


But how did you solve the serial number issue with the CRM inventory
mechanism ? 
I can probably sync our local inventory system to vTiger CRM, but if the
vTiger CRM inventory reports will not be useful, and its not easy to use
the inventory information in other entities (such as sales and
invoices), then its kind of useless to me - we can just as easily
continue to use our inventory system w/o integration and scribble serial
numbers by hand on the invoices.

--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
You know what I did before I married?
Anything I wanted to.
    -- Henny Youngman

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/d95f406f/attachment-0001.html 

From dgrant at accuratetechnologies.com  Tue Nov 21 11:01:17 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 21 Nov 2006 11:01:17 -0500
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>

 

 


But how did you solve the serial number issue with the CRM inventory
mechanism ? 

 

We didn't - no need, as we don't track serial numbers like you do.

 

But the concept of coding back-end connectors to do your data entry is
valid.

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/5e68f763/attachment-0001.html 

From oded at atelis.net  Tue Nov 21 11:24:45 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 18:24:45 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>
Message-ID: <1164126285.13078.65.camel@x-23.atelis.net>

On Tue, 2006-11-21 at 11:01 -0500, Dennis Grant wrote:
>  
> 
>  
> 
> 
> But how did you solve the serial number issue with the CRM inventory
> mechanism ? 
> 
>  
> 
> We didn?t ? no need, as we don?t track serial numbers like you do.
> 
>  
> 
> But the concept of coding back-end connectors to do your data entry is
> valid.


It is, and I will do that if I can figure out a way to map the entities
I need to what the CRM provides.


--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
In an essay about programming, Ellen Ullman tells a great anecdote about
a programmer who was so socially inept that they could only communicate
with him via email, even they all shared the same office. She also
writes: "Pretty graphical interfaces are commonly called user-friendly.
But they are not really your friends. Underlying every user-friendly
interface is terrific contempt for the humans who will use it. ...to
build a crash-proof system, the designer must be able to imagine--and
disallow--the dumbest action possible. He or she has to think of every
single stupid thing a human being could do. Gradually, over months and
years, the designer's mind creates a construct of the user as an
imbecile. This image is necessary. No crash-proof system can be built
unless it is made for an idiot." 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/a90fbeab/attachment-0001.html 

From dan.means at teamsrs.com  Tue Nov 21 11:26:57 2006
From: dan.means at teamsrs.com (Dan Means)
Date: Tue, 21 Nov 2006 08:26:57 -0800
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <1164124362.13078.61.camel@x-23.atelis.net>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
	<1164124362.13078.61.camel@x-23.atelis.net>
Message-ID: <456328D1.9070002@teamsrs.com>

An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/2d9213c2/attachment-0001.html 

From g.un at freemail.hu  Tue Nov 21 15:15:43 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 21:15:43 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164120984.10220.52.camel@joesunix.int>
Message-ID: <freemail.20061021211543.19078@fm08.freemail.hu>


> > Actually it is enough if you issue this query in mysql. I
> > have used this query in mysql and it always assigns a unique
> > value there.
> 
> Yes, this is because the field is defined as an
auto-increment. The
> problem is that this procedure does NOT update the value in
> vtiger_field_seq so any new module or maybe some patches
are going to
> get into trouble with overwritten field values. It's OK if
your sure you
> are never going to add anything somebody else has done.
> 
> The correct way to do this is launch the SQL insert and
then modify the
> value in vtiger_field_seq accordingly.
So, for what purpose this vtiger_field table is there? I
have a custom field in contacts (besides my problem
described earlier) and this vtiger_field table is really empty

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From g.un at freemail.hu  Tue Nov 21 15:15:43 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 21:15:43 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164120984.10220.52.camel@joesunix.int>
Message-ID: <freemail.20061021211543.19078@fm08.freemail.hu>


> > Actually it is enough if you issue this query in mysql. I
> > have used this query in mysql and it always assigns a unique
> > value there.
> 
> Yes, this is because the field is defined as an
auto-increment. The
> problem is that this procedure does NOT update the value in
> vtiger_field_seq so any new module or maybe some patches
are going to
> get into trouble with overwritten field values. It's OK if
your sure you
> are never going to add anything somebody else has done.
> 
> The correct way to do this is launch the SQL insert and
then modify the
> value in vtiger_field_seq accordingly.
So, for what purpose this vtiger_field table is there? I
have a custom field in contacts (besides my problem
described earlier) and this vtiger_field table is really empty

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From philip at vtiger.com  Fri Nov 24 03:04:46 2006
From: philip at vtiger.com (Philip)
Date: Fri, 24 Nov 2006 13:34:46 +0530
Subject: [Vtigercrm-developers] Status update on vtiger CRM 5.0.3
Message-ID: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>

Team,

Iam very happy to inform you all we have crossed half way mark inversion 5.0.3 development.  As of today we have fixed about 60+issues and updated the bleeding-edge demo @ 

http://en.vtiger.com/wip/index.php

Trac status:

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/query?status=closed&group=owner&milestone=5.0.3&order=priority.


Based on the community feedback on quality of the product we areplanning to update the trac status on daily basis so that we canindentify any issues well in advance and avoid last minute glitches.This will also help us making the release hassle free.

We are looking forward for your help in validating the clossed issues.If there are any breakages kindly drop a mail to philip at vtiger.com sothat i can update the ticket status in trac. 

Regards,
Philip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061124/8c8a53f2/attachment-0001.html 

From jens at Strawberry.COM  Fri Nov 24 03:38:55 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Fri, 24 Nov 2006 09:38:55 +0100
Subject: [Vtigercrm-developers] Status update on vtiger CRM 5.0.3
In-Reply-To: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>;
	from Philip on Fri, Nov 24, 2006 at 01:34:46PM +0530
References: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>
Message-ID: <20061124093855.B779@Strawberry.COM>


Hi,


PostgreSQL support is still not complete in vtigercrm release 5.0.2.
I've already sent an patch to you when 5.0 was released, but you
said to incorporate this into 5.0.1 ...

In 5.1_jens the PostgreSQL support is fine. 5.1_jens is based on 5.0.2.
I may extract the PostgreSQL related diffs between 5.0.2 and 5.1_jens and
hand them over to you as a patch until sunday ...
Should I? 


Kind regards,
Jens
On Fri, Nov 24, 2006 at 01:34:46PM +0530, Philip wrote:
> Team,
> 
> Iam very happy to inform you all we have crossed half way mark inversion 5.0.3 development.  As of today we have fixed about 60+issues and updated the bleeding-edge demo @ 
> 
> http://en.vtiger.com/wip/index.php
> 
> Trac status:
> 
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/query?status=closed&group=owner&milestone=5.0.3&order=priority.
> 
> 
> Based on the community feedback on quality of the product we areplanning to update the trac status on daily basis so that we canindentify any issues well in advance and avoid last minute glitches.This will also help us making the release hassle free.
> 
> We are looking forward for your help in validating the clossed issues.If there are any breakages kindly drop a mail to philip at vtiger.com sothat i can update the ticket status in trac. 
> 
> Regards,
> Philip

> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      



From gregory.machin at gmail.com  Wed Nov 29 07:32:54 2006
From: gregory.machin at gmail.com (Gregory Machin)
Date: Wed, 29 Nov 2006 14:32:54 +0200
Subject: [Vtigercrm-developers] vtigercrm nubee
Message-ID: <30200a940611290432s3c146c22h2deecc7b74021ad3@mail.gmail.com>

Hi All.
I'm trying to install my, vtiger 5.0.2 from the tgz file..
and I get the following on the finish step ....

Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to
allocate 64 bytes) in
/var/www/html/vtigercrm/adodb/adodb-xmlschema.inc.php on line 1656

Im using Fedora Core 6 64_bit
AMD Turion 64 3Hz
1Gig Ram
apache 2.2.3
php 5.1.6

php.ini ...
<snip>
max_execution_time = 300     ; Maximum execution time of each script, in second
max_input_time = 60     ; Maximum amount of time each script may spend parsing
memory_limit = 512M      ; Maximum amount of memory a script may consume
</snip>

I started out memory_limit = 32M then 64M then 128M then got peeved
and set it to 512M
and still the same error..

I have played with all the setting I know and have used to resolve,
similar problems before ..
I'm stumped ...

please help

Many thanks


-- 
Gregory Machin
gregory.machin at gmail.com
www.linuxpro.co.za


From nithya at vtiger.com  Thu Nov  2 01:27:08 2006
From: nithya at vtiger.com (Nithya)
Date: Wed, 01 Nov 2006 22:27:08 -0800
Subject: [Vtigercrm-developers] Forum Moderation
Message-ID: <10ea7597a25.-7019041752458725766.5893219660014322383@@vtiger.com>

Hi Ken,

Thank you for your mail and valuable input.

We have been off late taking the operation of moving some of  our posts(issues) from forums to bugtrac as far as possible so that it is ticketed for developers' attention as soon as possible. Once we move it there, we lock these posts, so that the status of the issue can be seen in the trac itself. 

We have successfully completed moving all code contributions  and most of the other posts into HOw to's section of our WiKi Documentation  and locked it in forums.We are trying to maintain only general discussions in the main forums so that the forums are not flooded ,making our job simpler.

To lock a forum post, it can be done only by those with moderator priviliges.However, we will try and put a message as the last post , as you have rightly suggested.

And terribly sorry for the spam posts which you have had to cut off. We are trying desperately to do away with these unwarranted posts!

Please keep in touch with us.

Best Regards
Nithya

_______________________________________________________________________________________

Subject: 
[Vtigercrm-developers] Forum Moderation 
From: 
Ken Lyle <kenlyle at yahoo.com> 
Date: 
Mon, 30 Oct 2006 11:08:14 -0800 (PST) 
To: 
vTiger List <vtigercrm-developers at lists.vtigercrm.com> 

I've been moderating a bit, mainly deleting "girlie"
and "pharma" posts...I have seen a couple of minor
gripes about threads being locked.  I wonder whether
the board can be enhanced to show other moderators who
locked the thread, when and why?

Is it possible that threads can get locked by
accident?

Is this one locked, for example, because it's
superseded by another:
http://forums.vtiger.com/viewtopic.php?t=8932&postdays=0&postorder=asc&highlight=email&start=10

If so, it would be good to put a redirect message as
the last post before the thread is locked.

Just trying to get procedures down...

Thanks,
Ken

484-948-5706
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061101/c9ae9beb/attachment-0002.html 

From fp at crm-now.de  Fri Nov  3 05:32:15 2006
From: fp at crm-now.de (Frank Piepiorra)
Date: Fri, 3 Nov 2006 11:32:15 +0100
Subject: [Vtigercrm-developers] Bugtracker needs configuration
In-Reply-To: <mailman.642.1161957249.4976.vtigercrm-developers@lists.vtigercrm.com>
Message-ID: <200611031027.kA3ARZD8005280@doko.im-netz.de>

If you use the bugtracker to report bugs you can choose 4.2 or 5.0.0 but not
5.0.1 or 5.0.2 as the vtiger version. Please add the new version so that
bugs can be assigned to the proper version.

Regards,



From allan.bush+vtiger_dev at gmail.com  Fri Nov  3 11:29:58 2006
From: allan.bush+vtiger_dev at gmail.com (Allan Bush)
Date: Fri, 3 Nov 2006 08:29:58 -0800
Subject: [Vtigercrm-developers] Bugtracker needs configuration
In-Reply-To: <200611031027.kA3ARZD8005280@doko.im-netz.de>
References: <mailman.642.1161957249.4976.vtigercrm-developers@lists.vtigercrm.com>
	<200611031027.kA3ARZD8005280@doko.im-netz.de>
Message-ID: <3bec26390611030829t48726a12qe6f032776ab16bdd@mail.gmail.com>

Thanks for the heads up.

The version/milestone options should be up to date now.  I'd be temped
to remove 5.0.0 and 5.0.1 as version options when creating new tickets
(as the issue may have been fixed with 5.0.2) but I'll leave that up
to the people working on 5.x.

On 11/3/06, Frank Piepiorra <fp at crm-now.de> wrote:
> If you use the bugtracker to report bugs you can choose 4.2 or 5.0.0 but not
> 5.0.1 or 5.0.2 as the vtiger version. Please add the new version so that
> bugs can be assigned to the proper version.
>
> Regards,
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com
>


From joe at tsolucio.com  Fri Nov  3 12:31:15 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Fri, 03 Nov 2006 18:31:15 +0100
Subject: [Vtigercrm-developers] new vtiger_entityname table
Message-ID: <1162575075.11542.23.camel@joesunix.int>

Hi,

What is the new vtiger_entityname table for?
Do we have to add entries to this table for our own modules (timecards,
projects,...)?
Do we have to update the wiki with this info?

Thanks, Joe
TSolucio



From dimitar.peev at gmail.com  Sat Nov  4 05:37:23 2006
From: dimitar.peev at gmail.com (Dimitar Peev)
Date: Sat, 4 Nov 2006 12:37:23 +0200
Subject: [Vtigercrm-developers] no authentication on soap
Message-ID: <3b0e87e10611040237s34d73f8cxdb40a94ceace157a@mail.gmail.com>

I see that it is possible to flood every installation of vtiger with
leads and contacts through the soap RPC, am I right? There is no
password whatsoever.


From kenlyle at yahoo.com  Sun Nov  5 09:45:59 2006
From: kenlyle at yahoo.com (Ken Lyle)
Date: Sun, 5 Nov 2006 06:45:59 -0800 (PST)
Subject: [Vtigercrm-developers] MySQL Migration Tool
Message-ID: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>

I just discovered on my computer the MySQL Migration
Tool, 1.1.4 rc.

This looks like a framework for doing database
transforms, like vTiger 4.2.3 to 5, or Sugar 4.x to
4.2.3 or 5.

This might be a more supportable way to deliver the
data migrations we need.

Ken

484-948-5706
866-OUT OF BOX
(866-688-6326)

-- 
"He who reads nothing is more educated than he who reads nothing but newspapers."  - Thomas Jefferson


From Dirk.Gorny at genion.de  Sun Nov  5 10:04:25 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Sun, 5 Nov 2006 16:04:25 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
Message-ID: <200611051604.25302.Dirk.Gorny@genion.de>

Am Sonntag, 5. November 2006 15:45 schrieb Ken Lyle:
> I just discovered on my computer the MySQL Migration
> Tool, 1.1.4 rc.

Why another tool? The more code, the more errors. The basic thing is to put 
one database struktur to annother. Our ancestry therfor developed SQL. Long 
time ago with applications which where more complex in database structure all 
things were done in SQL. This prevents of running out of memory or on 
timeouts by the *.php or whatever you use. And, the great benefit; you will 
get meaningful error messages which are not dumped by the overlying script.
So my recommendation:
Pure SQJ, as few as possible Loops and complex strukture.
Not referencing by attribute order. Ever referencing by attribute.
I know it is a boring idea, but for me it worked the last 20 Jears.

Best regards,

Dirk


From remco at artoge.nl  Sun Nov  5 10:24:38 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Sun, 5 Nov 2006 16:24:38 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <200611051604.25302.Dirk.Gorny@genion.de>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
Message-ID: <4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>

Hi all,

Well I agree partly, as MYSQL isn't the only database in place! As  
their are some who work with postgrssql instead, not to mention the  
possibility for Oracle or anything else.
If it's a tool to be used by many other sql databases fine, but as  
far as I know it's not.

Refering to Dirk question why another tool, I've been developing with  
another tool: see www.radicore.org because I prefer a even stronger  
splitup: in using 3-tier design architecture.
Although until now it's only been for customisation of VtigerCRM, I  
would love to see the base of 3-tier which is allready within  
VtigerCRM taken a few steps futher.

Ton introduce it futher with a
[quote from radicore website:]
3-Tier Architecture

An architectural pattern of software development in which the  
application logic is separated into different tiers or layers:

The Presentation Layer or User Interface, which all handles all  
communication with the user.
The Business Layer, which has a separate object for each business  
entity.
The Data Access Layer which communicates with the database.
This allows individual layers to be enhanced, or even replaced, with  
minimal impact on the other layers. For example it should be possible  
to change nothing but the contents of the presentation layer in order  
to switch from XHTML output to PDF output, or to change nothing but  
the contents of the data access layer in order to switch from one  
database engine to another.

[end quote]

Best regards, Remco




Op 5-nov-2006, om 16:04 heeft Dirk Gorny het volgende geschreven:

> Am Sonntag, 5. November 2006 15:45 schrieb Ken Lyle:
>> I just discovered on my computer the MySQL Migration
>> Tool, 1.1.4 rc.
>
> Why another tool? The more code, the more errors. The basic thing  
> is to put
> one database struktur to annother. Our ancestry therfor developed  
> SQL. Long
> time ago with applications which where more complex in database  
> structure all
> things were done in SQL. This prevents of running out of memory or on
> timeouts by the *.php or whatever you use. And, the great benefit;  
> you will
> get meaningful error messages which are not dumped by the overlying  
> script.
> So my recommendation:
> Pure SQJ, as few as possible Loops and complex strukture.
> Not referencing by attribute order. Ever referencing by attribute.
> I know it is a boring idea, but for me it worked the last 20 Jears.
>
> Best regards,
>
> Dirk
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061105/4d7844fb/attachment-0002.html 

From acc at anthonychavez.org  Sun Nov  5 16:42:43 2006
From: acc at anthonychavez.org (Anthony Chavez)
Date: Sun, 05 Nov 2006 14:42:43 -0700
Subject: [Vtigercrm-developers] Customer portal sending wrong URL
Message-ID: <87mz75d0z0.fsf@hephaistos.aegaeum.anthonychavez.org>

vtigercrm-developers:

It would appear that version 5.0.0 of the Customer Portal (on FreeBSD
6.1-RELEASE-p3, Apache 2.2.3, and PHP 5.1.6) is not sending the
correct URL in emails.  Here is an example, which results in 404:

https://mydomain.com/vtiger/customerportal/general.php?action=UserTickets&ticketid=236&fun=detail

general.php does not exist anywhere in my vtiger tree.  Did I neglect
to install it, or has it been removed since version 4.x?

Thanks.

-- 
Anthony Chavez                                 http://anthonychavez.org/
mailto:acc at anthonychavez.org         jabber:acc at jabber.anthonychavez.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 480 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061105/b6da2111/attachment-0001.bin 

From Dirk.Gorny at genion.de  Mon Nov  6 02:22:15 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Mon, 6 Nov 2006 08:22:15 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
Message-ID: <200611060822.15947.Dirk.Gorny@genion.de>

Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:

> Refering to Dirk question why another tool, I've been developing with
> another tool: see www.radicore.org because I prefer a even stronger
> splitup: in using 3-tier design architecture.
> Although until now it's only been for customisation of VtigerCRM, I
> would love to see the base of 3-tier which is allready within
> VtigerCRM taken a few steps futher.

Hello Remco,

Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier architecture not 
the same thing than putting a new 300HP engine in an old Volkswagen Beetle?
There are better things to deal with a 3-tier architecture.
For exaple using a application server like Jboss and you get rid of much 
security issuees by having all those connectors and process encapsulation 
allready there.
I had worked a little with openCRX (http://www.opencrx.org/) wich has to my 
mind the best architecture (MDA) but must become user-friendly which 
vtigercrm is. In my opinion vtigercrm has to do a stronger encapsulating of 
the modules and building a crm-core as an interface for the Modules. But I am 
not shure if this is actually possible with php. At the end you have another 
application server.

Best regards,

Dirk


From remco at artoge.nl  Mon Nov  6 02:42:40 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 6 Nov 2006 08:42:40 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <200611060822.15947.Dirk.Gorny@genion.de>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
	<200611060822.15947.Dirk.Gorny@genion.de>
Message-ID: <07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>

Hi Dirk,


Well to use your metafor:
If you would use php 3 it would be: an old beetle with a new engine.
But as we're using php 5 it's the new beetle with a new engine.
Indeed it's possible but not easy to build, and I agree again partly:
As I'm using a hosted service for vtigercrm: it's only used for crm,  
in that way it's in my mind all ready an application server.
I will have to look into openCRX before I respond to the rest aswell.

Best regards and learning :-)

Remco



Op 6-nov-2006, om 8:22 heeft Dirk Gorny het volgende geschreven:

> Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:
>> Refering to Dirk question why another tool, I've been developing with
>> another tool: see www.radicore.org because I prefer a even stronger
>> splitup: in using 3-tier design architecture.
>> Although until now it's only been for customisation of VtigerCRM, I
>> would love to see the base of 3-tier which is allready within
>> VtigerCRM taken a few steps futher.
>
> Hello Remco,
>
> Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier  
> architecture not
> the same thing than putting a new 300HP engine in an old Volkswagen  
> Beetle?
> There are better things to deal with a 3-tier architecture.
> For exaple using a application server like Jboss and you get rid of  
> much
> security issuees by having all those connectors and process  
> encapsulation
> allready there.
> I had worked a little with openCRX (http://www.opencrx.org/) wich  
> has to my
> mind the best architecture (MDA) but must become user-friendly which
> vtigercrm is. In my opinion vtigercrm has to do a stronger  
> encapsulating of
> the modules and building a crm-core as an interface for the  
> Modules. But I am
> not shure if this is actually possible with php. At the end you  
> have another
> application server.
>
> Best regards,
>
> Dirk
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com



From lists.vtigercrm.com at callum-macdonald.com  Mon Nov  6 07:19:12 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Mon, 06 Nov 2006 19:19:12 +0700
Subject: [Vtigercrm-developers] Field cascade from Account to Contact
Message-ID: <454F2840.6030907@callum-macdonald.com>

Hey Guys,

Does anyone know if it's possible to have Account Type available as a 
field in a contact's record? So you could filter contacts according to 
Account Type, etc. If not, any suggestions on how we'd best achieve 
this? I can see a couple of options...

1) Create a custom field in Contacts and hack vtiger to automatically 
update the field every time an account field is changed. Potentially nasty.

2) Hack the sql to join the field in and add it to the result set. Again 
potentially nasty.

Suggestions most welcome on a postcard... :)

Cheers,


Callum.



From remco at artoge.nl  Mon Nov  6 11:57:02 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 6 Nov 2006 17:57:02 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
	<200611060822.15947.Dirk.Gorny@genion.de>
	<07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
Message-ID: <F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>

Well,

Reading a bit more:
http://www-128.ibm.com/developerworks/rational/library/may05/brown/ 
index.html

It makes sence: radicore.org is a usefull part for an MDA approche.  
Read for example, in the above url: Using MDA to customize a solution  
framework

And yes with a stronger encapsulating of the modules and building a  
crm-core as an interface for the Modules.
You can have another application server with php.

But I must state aswell that I do hope to see that's we'll still  
provide php only as wamp/lamp solution.
As said before, that's all I need :-)
If all this could help to improve the product let's then use it.


@Dirk, could you give us your idea's on more specific improvements,  
compared with openCRX?



Best regards,

Remco




Op 6-nov-2006, om 8:42 heeft Dhr. R.R. Gerbrands het volgende  
geschreven:

> Hi Dirk,
>
>
> Well to use your metafor:
> If you would use php 3 it would be: an old beetle with a new engine.
> But as we're using php 5 it's the new beetle with a new engine.
> Indeed it's possible but not easy to build, and I agree again partly:
> As I'm using a hosted service for vtigercrm: it's only used for crm,
> in that way it's in my mind all ready an application server.
> I will have to look into openCRX before I respond to the rest aswell.
>
> Best regards and learning :-)
>
> Remco
>
>
>
> Op 6-nov-2006, om 8:22 heeft Dirk Gorny het volgende geschreven:
>
>> Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:
>>> Refering to Dirk question why another tool, I've been developing  
>>> with
>>> another tool: see www.radicore.org because I prefer a even stronger
>>> splitup: in using 3-tier design architecture.
>>> Although until now it's only been for customisation of VtigerCRM, I
>>> would love to see the base of 3-tier which is allready within
>>> VtigerCRM taken a few steps futher.
>>
>> Hello Remco,
>>
>> Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier
>> architecture not
>> the same thing than putting a new 300HP engine in an old Volkswagen
>> Beetle?
>> There are better things to deal with a 3-tier architecture.
>> For exaple using a application server like Jboss and you get rid of
>> much
>> security issuees by having all those connectors and process
>> encapsulation
>> allready there.
>> I had worked a little with openCRX (http://www.opencrx.org/) wich
>> has to my
>> mind the best architecture (MDA) but must become user-friendly which
>> vtigercrm is. In my opinion vtigercrm has to do a stronger
>> encapsulating of
>> the modules and building a crm-core as an interface for the
>> Modules. But I am
>> not shure if this is actually possible with php. At the end you
>> have another
>> application server.
>>
>> Best regards,
>>
>> Dirk
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061106/d2e0f462/attachment-0002.html 

From joel.rydbeck at nubrek.com  Tue Nov  7 00:08:12 2006
From: joel.rydbeck at nubrek.com (Joel Rydbeck)
Date: Mon, 6 Nov 2006 23:08:12 -0600
Subject: [Vtigercrm-developers] 4.2 development
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com><200611051604.25302.Dirk.Gorny@genion.de><4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl><200611060822.15947.Dirk.Gorny@genion.de><07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
Message-ID: <64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>

Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
 
- Joel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 3212 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061106/2b038104/attachment-0003.bin 

From nolan at peaceworks.ca  Tue Nov  7 00:19:27 2006
From: nolan at peaceworks.ca (Nolan Andres)
Date: Tue, 07 Nov 2006 00:19:27 -0500
Subject: [Vtigercrm-developers] 4.2 development
In-Reply-To: <64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com><200611051604.25302.Dirk.Gorny@genion.de><4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl><200611060822.15947.Dirk.Gorny@genion.de><07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
	<64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>
Message-ID: <4550175F.30105@peaceworks.ca>

I'm interested, but can't be counted on for a lot of contributions. I'd 
be willing to take on issue 1507 (partial matches in searches), though, 
if that would be useful.

peace,
Nokes

Joel Rydbeck wrote:
> Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
>  
> - Joel
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


From grahama at add-ons.co.uk  Tue Nov  7 02:58:35 2006
From: grahama at add-ons.co.uk (grahama at add-ons.co.uk)
Date: Tue, 7 Nov 2006 07:58:35 +0000 (GMT)
Subject: [Vtigercrm-developers] 4.2 development
Message-ID: <865798.1162886315797.JavaMail.wibapp@vuk1120.visto-mgmt.com>

Joel

We are still on 4.x and because of the many custom requirements we have, we will remain for sometime.

We are also using mysql, would you say that a move to postgres would be beneficial ? What benefits have you seen?

Many thanks....any comments welcome.

Graham 

-----Original Message-----
From: "Joel Rydbeck" <joel.rydbeck at nubrek.com>
To: "vtigercrm-developers at lists.vtigercrm.com" <vtigercrm-developers at lists.vtigercrm.com>
Sent: 07/11/06 05:07
Subject: 4.2 development

Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
 
- Joel



From dgrant at accuratetechnologies.com  Tue Nov  7 12:02:45 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 7 Nov 2006 12:02:45 -0500
Subject: [Vtigercrm-developers] profileGlobalPermission
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4D88@exch.accuratetechnologies.com>

OK gang, I've been beating my head against this for a while and I'm
starting to get frustrated.

 

Here is the issue: 

 

1)         in the ListView for TroubleTickets, some users can see
TicketID and some cannot (the requirement is that all users can see
them)

 

2)         There is no place in the field permissions editor for Ticket
ID (or crmid, for that matter)

 

3)         Certain profiles CAN see TicketID; some cannot.

 

4)         The difference between those profiles that can see ticketID
is that they have $profileGlobalPermission[1] set to 0, where those that
cannot see TicketID have $profileGlobalPermission[1] set to 1;

 

5)         I think I've found where in the code the test is made - if
you have $is_admin true OR $profileGlobalPermission[1]==0, then you get
the full field list for that module/tab. Otherwise, there's a
complicated query that pulls down allowed fields.

 

6)         I have not (yet) found where $profileGlobalPermission[1] is
set

 

7)         I have not (yet) found how to add TicketID to a list of
permissions where $profileGlobalPermission[1] == 0;

 

I think being able to do #7 - and being to do it via the security
interface - is the ultimate goal here.

 

Can somebody PLEASE explain how this all interacts, before I go crazy?

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061107/980beb25/attachment-0002.html 

From joe at tsolucio.com  Tue Nov  7 15:59:04 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 07 Nov 2006 21:59:04 +0100
Subject: [Vtigercrm-developers]  profileGlobalPermissions
Message-ID: <1162933144.8036.11.camel@joeshome.int>

Hi Dennis,

I have seen that the $profileGlobalPermissions array is set in the users
corresponding user_privileges_id.php file (in the corresponding
directory). This file is created in the CreateUserPrivilegeFile function
in a script of the same name in modules/Users directory. I don't know
when the function is called but I suppose that it is when you create a
user.

This function calls getCombinedUserGlobalPermission and this one calls
getProfileGlobalPermission which accesses the table
vtiger_profile2globalpermissions where the profiles Global Access
Privileges are assigned.

So I think that those profiles that are working must have the Global
Privileges set to ALL and the others don't.

I suppose that if you change the values in the database, which is
equivalent to changing the profiles value you may get VT working in a
way that you don't want. I think you will have to look at another way of
adding the ticketid to the view. Probably playing with the SQL command.

What I did was create my own ticketid field which autoincrements with
code based on that available in the forums (I can send you my version if
you want) and I use this field instead of VT's ticketid.

Sorry I couldn't be of more help.

Regards, Joe
TSolucio



From dfar2008 at gmail.com  Tue Nov  7 23:27:26 2006
From: dfar2008 at gmail.com (ding jianting)
Date: Wed, 8 Nov 2006 12:27:26 +0800
Subject: [Vtigercrm-developers] dashboard bug
Message-ID: <fb148e2a0611072027v4c54a095q575306bf3c23bc89@mail.gmail.com>

Hi,all
I found error msg "No data available with the specified time period"  in
Dashboard module. I cracked code and found $this->module_id,module_name are
invoked by process_full_list_query function of CRMEntity Bean. But there are
no module_id,module_name fields in Potentails bean. Two fields exists in
5.0.1. So I added module_id,module_name field in Potentials.php.
Dashboard module works properly again.

another bug about report module:
AdvancedFilter.php getSecondaryColumns_AdvFilterHTML function:
from:
if(isset($mod_strings[$fieldlable]))
to:
if(isset($mod_strings[$fieldlabel]))

If any problem, pls let me know.

Thanks and regards

-- 
DingJianting
________________________________________
????????????: http://www.c3crm.com
-----------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061108/2bd6b40e/attachment-0002.html 

From lists.vtigercrm.com at callum-macdonald.com  Tue Nov  7 23:46:31 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Wed, 08 Nov 2006 11:46:31 +0700
Subject: [Vtigercrm-developers] Release naming
Message-ID: <45516127.4030306@callum-macdonald.com>

Hi Guys,

I think the naming of releases should be simplified. I suggest Joomla 
provides a good template to use (with one or two improvements):
http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11

vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
from what version you can apply patch 2, and so on. I suggest we use the 
same method as Joomla. When a new version is released (5.0.2) then the 
following files are released:
vtigercrm-5.0.0-to-5.0.2-patch.zip
vtigercrm-5.0.1-to-5.0.2-patch.zip
vtigercrm-5.0.2-full-windows.exe
vtigercrm-5.0.2-full-linux.bin
vtigercrm-5.0.2-full-lamp.tgz

<http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
think it's important to include the windows/linux/lamp in the file name. 
I know it's obvious from the extension to MOST people, but not to everyone.

I also think these files should all be released in the same package in 
sourceforge. In my opinion, splitting the full and patch releases is 
confusing.

I think this is a HUGELY important issue, as important as the recent 
heated debate over the naming of the GA release.

Comments on a postcard...


Callum.


From ncknight at pacific.net.sg  Wed Nov  8 00:41:07 2006
From: ncknight at pacific.net.sg (Nicholas Chan)
Date: Wed, 08 Nov 2006 13:41:07 +0800
Subject: [Vtigercrm-developers] Release naming
In-Reply-To: <45516127.4030306@callum-macdonald.com>
References: <45516127.4030306@callum-macdonald.com>
Message-ID: <45516DF3.20809@pacific.net.sg>

I just found it odd that the naming issue is still being discussed till
today. Why isn't the standard set and enforced already?

Callum Macdonald wrote:
> Hi Guys,
>
> I think the naming of releases should be simplified. I suggest Joomla 
> provides a good template to use (with one or two improvements):
> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11
>
> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
> from what version you can apply patch 2, and so on. I suggest we use the 
> same method as Joomla. When a new version is released (5.0.2) then the 
> following files are released:
> vtigercrm-5.0.0-to-5.0.2-patch.zip
> vtigercrm-5.0.1-to-5.0.2-patch.zip
> vtigercrm-5.0.2-full-windows.exe
> vtigercrm-5.0.2-full-linux.bin
> vtigercrm-5.0.2-full-lamp.tgz
>
> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
> think it's important to include the windows/linux/lamp in the file name. 
> I know it's obvious from the extension to MOST people, but not to everyone.
>
> I also think these files should all be released in the same package in 
> sourceforge. In my opinion, splitting the full and patch releases is 
> confusing.
>
> I think this is a HUGELY important issue, as important as the recent 
> heated debate over the naming of the GA release.
>
> Comments on a postcard...
>
>
> Callum.
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
>   



From jtk at yahoo.com  Wed Nov  8 01:38:26 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Wed, 08 Nov 2006 01:38:26 -0500
Subject: [Vtigercrm-developers] Release naming
References: <45516127.4030306@callum-macdonald.com>
Message-ID: <pan.2006.11.08.06.38.24.169176@yahoo.com>

Callum Macdonald wrote:
> I think the naming of releases should be simplified. vtiger 5 patch 2
> and vtiger 5.0.2 are confusing names. It is not clear from what version
> you can apply patch 2, and so on. I suggest we use the same method as
> Joomla. When a new version is released (5.0.2) then the following files
> are released:
>
> I also think these files should all be released in the same package in
> sourceforge. In my opinion, splitting the full and patch releases is
> confusing.

Just an opinion, but I don't think vtigercrm should concern itself with
(or release) anything except pure-source, verbatim-to-the-svn-tag tar.gz
and .zip releases.

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseNaming
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseProcedure

Binary installers, patch-overlay releases, these are all the things
that third-party packagers do according to their own standards. We don't
want those problems. Packagers have the expertise and the ultimate
responsibility to do final-installation correctly for their security
strategy. What they need from the vtigercrm team is a rock-solid tarball
with a predictable layout, at a predictable unique URL, happening the same
way with every major, minor and bugfix release.

vtigercrm releases should be tailored for a primary consumer audience of
system packagers, and a secondary audience of expert manual install
aficionados who are willing to obsessively merge the unpacked source tree
to their own customized installation, and additionally set file
permissions, etc, according to a well-documented INSTALL.txt.



From remco at artoge.nl  Wed Nov  8 06:30:17 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Wed, 8 Nov 2006 12:30:17 +0100
Subject: [Vtigercrm-developers] Release naming
In-Reply-To: <45516DF3.20809@pacific.net.sg>
References: <45516127.4030306@callum-macdonald.com>
	<45516DF3.20809@pacific.net.sg>
Message-ID: <B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>

@ Nicholas,

If you find it odd, you might want to wait using vtigercrm as we're  
in the process of becoming mature.

@ Callum,

What you are refering to is not release naming to my idea.
But package naming.
I think that's a bit confusing for more people,
The release naming is still the same, in you example 5.0.2,
depending on the target platform is you're suggested packet naming.

I can agree with it, yet as our user are no newbee's the naming as  
stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
ReleaseNaming
is enough, I would suggest adding a wiki page for the newbee's who  
doesn't know what to download instead.

Best regards,

Remco




Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:

> I just found it odd that the naming issue is still being discussed  
> till
> today. Why isn't the standard set and enforced already?
>
> Callum Macdonald wrote:
>> Hi Guys,
>>
>> I think the naming of releases should be simplified. I suggest Joomla
>> provides a good template to use (with one or two improvements):
>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/ 
>> frs.joomla_1_0.1_0_11
>>
>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not  
>> clear
>> from what version you can apply patch 2, and so on. I suggest we  
>> use the
>> same method as Joomla. When a new version is released (5.0.2) then  
>> the
>> following files are released:
>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>> vtigercrm-5.0.2-full-windows.exe
>> vtigercrm-5.0.2-full-linux.bin
>> vtigercrm-5.0.2-full-lamp.tgz
>>
>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0- 
>> patch2.zip?download>I
>> think it's important to include the windows/linux/lamp in the file  
>> name.
>> I know it's obvious from the extension to MOST people, but not to  
>> everyone.
>>
>> I also think these files should all be released in the same  
>> package in
>> sourceforge. In my opinion, splitting the full and patch releases is
>> confusing.
>>
>> I think this is a HUGELY important issue, as important as the recent
>> heated debate over the naming of the GA release.
>>
>> Comments on a postcard...
>>
>>
>> Callum.
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>
>>
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061108/b9c3bc42/attachment-0002.html 

From joe at tsolucio.com  Wed Nov  8 18:50:30 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Thu, 09 Nov 2006 00:50:30 +0100
Subject: [Vtigercrm-developers] vtiger popup calendar start day of the week
Message-ID: <1163029830.28710.8.camel@joeshome.int>

Hi,

I tried to get the VT calendar start on monday instead of sunday. I
found the code very hard to follow and, to my surprise, there was no
variable whose value I could change to get the calendar start on monday.
As I did for the javascript calendar changing the variable firstDay.

I finaly add a bit of code to the modules/Calendar/Calendar.php

I changed line 111
   $num_of_prev_days = $firstday_of_month->dayofweek;

to
   $num_of_prev_days = ($firstday_of_month->dayofweek==0 ? 6 :
$firstday_of_month->dayofweek-1);

And the same for year. I changed line 127
  $noof_prevdays = $firstday_of_month->dayofweek;

to
  $noof_prevdays = ($firstday_of_month->dayofweek==0 ? 6 :
$firstday_of_month->dayofweek-1);

This seems to be working fine but I really don't know what I am doing.
 Does this break other things?
 Will I start getting activities and notifications on the wrong dates?
 Is there really no global variable I can change to get the calendar
start on monday?

Any comments would be greatly appreciated.

Thanks, Joe
TSolucio




From leandro at oriontek.org  Wed Nov  8 22:12:01 2006
From: leandro at oriontek.org (Leandro Rache Sanchez)
Date: Wed, 8 Nov 2006 22:12:01 -0500
Subject: [Vtigercrm-developers] vtiger 5.0.0 to vtiger 5.0.2
Message-ID: <200611082212.01724.leandro@oriontek.org>

Hi developers,
I tried to install vtiger 5.0.2 from SVN and this ok, but i need to update 
vtiger 5.0.0 to vtiger 5.0.2, some simply copy paste from SVN soesn't work, 
please help me with some script for this update.

Thanks, 
-- 

   ~     Leandro Rache Sanchez
 (. .)   leandro at oriontek.org
  \V/      
 //"\\   Corporacion Tecnol?gica ORION.
/( ' )\  info at oriontek.org
 ^*-*^   http://www.oriontek.org/orion/
---------------------------------------




From gopals at vtiger.com  Thu Nov  9 08:32:58 2006
From: gopals at vtiger.com (Gopal)
Date: Thu, 09 Nov 2006 19:02:58 +0530
Subject: [Vtigercrm-developers] Announcement: Richie's Europe Trip Schedule..
Message-ID: <45532E0A.4050709@vtiger.com>

Dear Team,

I am pleased to inform you all that Richie's Europe trip has been 
finalized.

He will be reaching *UK* before 11th Nov and start visiting our user 
community and partners from 12th of Nov. In UK he will stay for about 10 
days time. Based on the community needs he will extend his stay for 3 to 
4 days.

Next, he will be going to *Germany* or *France* for around 20 days stay 
where he will visit our community & business partners in various cities. 
In *France* he will be attending an Open Source Competition as a Jury 
member (Nov 30th and 31st).

http://www.tropheesdulibre.org/index.php?module=4&action=3

His stay in France for 10 to 15 days period in depending up on the 
community requirements. He will also visit other *Schengen* countries 
depending on the community demand.

*/I would like to request you all to let us know your convenient place & 
time to meet Richie. In each country he would like meet most of our 
community members.

/*Please drop a mail directly to *richie at vtiger.com* (and CC to 
gopals at vtiger.com) with the following information:

    * Place
    * Convenient Time
    * Address & Phone No

Looking forward for your kind cooperation for making vtiger's first trip 
to Europe a successful one!

Best Regards,
*Gopal
vtiger Team*
---
S.S.G.Gopal
+1 925 965 6387
Skype: sripadag
blog: http://blogs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061109/69cf1fb5/attachment-0002.html 

From kenlyle at yahoo.com  Thu Nov  9 10:15:20 2006
From: kenlyle at yahoo.com (Ken Lyle)
Date: Thu, 9 Nov 2006 07:15:20 -0800 (PST)
Subject: [Vtigercrm-developers] Being Good Tool Users
Message-ID: <20061109151520.49889.qmail@web37312.mail.mud.yahoo.com>

Community Engagement and Bug Fix Case Study:

http://forums.vtiger.com/viewtopic.php?t=10811

I submitted a simple one file patch on October 31.
That fix is stuck in the middle of the forum thread at
the bottom of page 3.

**Can I make a post within a thread Starred, Featured,
Sticky?  That would seem like a good thing in this
case.

***Some people have reported that it works, some
people have other issues.  It appears that we have NO
STRUCTURED mechanism for capturing the fact that there
is a candidate fix, and what versions and operating
systems on which the fix was successful or
unsuccessful.

Furthermore, we don't seem to have a way of tracking
the 'credibility' of each report.  Ideally, we could
score these like so:

Senior Users: 90% fix rate
Intermediate Users: 60% fix rate
Noob Users: 50% fix rate

>From this example, I would assume that the fix is
good, for the versions where the Senior Users report a
fix rate over 80%, and the rest is user error.

Back to the story....Today, 10 days later (Is that
good? It gives time to get feedback, but wastes time
of people who have a hard time finding the
fix)...Nithya moved this to TRAC,
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/ticket/2578
, and posted a link to the 
thread above, but it's not obvious that you have to go
to page 3 to find the patch.  There's no way in the
forum to filter just posts with attachments....see **

SO, I posted the patch to the TRAC ticket.  But not
everyone has access to TRAC, I think.  FURTHER, when I
go to the TRAC page,
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report ,
not logged in (public), I can't SEARCH

How can I determine whether the bug that I am
considering posting has already been posted?  Even if
I click Active Tickets, 
there is No Search.  I don't believe that everyone
knows about Ctrl+F (Firefox).

IF we had ***, either in PHPBB or TRAC, then we could
confidently LOCK the forum thread with a single
redirect to the TRAC ticket.

SO, here is an idea...

SEARCH in the Forums seems broken...why, when I search
for "Incoming Email" is the thread above 6th, behind
less relevant threads?

Assuming that THAT can be fixed...perhaps, when there
is a candidate fix for a bug, there should be a POLL
created that runs for a certain period...after which,
if more than X% report success, the thread is locked,
and  
a Starred, Featured, Sticky redirect to the TRAC
ticket placed atop the thread.  This would save
everyone time...

I am a Moderator, where is the ability to create a
Poll?  I would like to try this concept...

Second, maybe TRAC is a better place to collect
Operating System and version information for each bug
and candidate fix.  Who can add these 
fields?

This would also provide us usage data, right?  I know
Sugar has that thing that collects usage data, which I
would guess includes O/S, # of records,
etc.  If we know what configurations people are using,
we can better isolate bugs...In fact, I can't really
imagine trying to do it without that info.

How can we even set priorities without knowing, for
example, "There are 10 users with Bug #XXXX, but they
are all running Red Hat 7".  Then we can issue
a statement that Red Hat 7 is not an officially
supported platform, but Good Luck anyway....

I think it's important to realize that if we can save
120 people 30 seconds every day, we can get an extra
hour that can be 
used to improve vTiger.

I offer a challenge to all of you.....to select tools
and use them in a way that accurately reflects the
talent and intelligence of this group, because, right
now, it does not, IMNSHO (In My Not So Humble
Opinion).  

AND, of course, the Core Team should avoid shipping
critical modules in a broken state.

I want to help this effort, but become disheartened
when it looks like nobody is thinking systematically,
and there is no documentation sufficient
to guide a reasonably bright person in how to
contribute...I'll contribute some of that next, partly
based on feedback to this thread.

I've put hours into composing this, and would like to
see something come of it...

Thanks,
Ken

484-948-5706
866-OUT OF BOX
(866-688-6326)

-- 
"He who reads nothing is more educated than he who reads nothing but newspapers."  - Thomas Jefferson


From jens at Strawberry.COM  Thu Nov  9 14:43:48 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Thu, 9 Nov 2006 20:43:48 +0100
Subject: [Vtigercrm-developers] Announcement: Richie's Europe Trip
	Schedule..
In-Reply-To: <45532E0A.4050709@vtiger.com>;
	from Gopal on Thu, Nov 09, 2006 at 07:02:58PM +0530
References: <45532E0A.4050709@vtiger.com>
Message-ID: <20061109204348.A13058@Strawberry.COM>

Hi,

End of November/Beginnig of December would be fine for me all the
time. My location is Munich/Germany. I'd may pick up Richie at the
munich airport and arrange a hotel room for him here in my town.


My address is

    Strawberry EDV Systeme GmbH
    Jens Hamisch - CEO
    Am Flosskanal 9a
    D-82515 Wolfratshausen
    Tel.: +49 8171 41805-0


You may contact me or our my colleque Mrs. Westermann to clarify the
details.


Jens




On Thu, Nov 09, 2006 at 07:02:58PM +0530, Gopal wrote:
> Dear Team,
> 
> I am pleased to inform you all that Richie's Europe trip has been 
> finalized.
> 
> He will be reaching *UK* before 11th Nov and start visiting our user 
> community and partners from 12th of Nov. In UK he will stay for about 10 
> days time. Based on the community needs he will extend his stay for 3 to 
> 4 days.
> 
> Next, he will be going to *Germany* or *France* for around 20 days stay 
> where he will visit our community & business partners in various cities. 
> In *France* he will be attending an Open Source Competition as a Jury 
> member (Nov 30th and 31st).
> 
> http://www.tropheesdulibre.org/index.php?module=4&action=3
> 
> His stay in France for 10 to 15 days period in depending up on the 
> community requirements. He will also visit other *Schengen* countries 
> depending on the community demand.
> 
> */I would like to request you all to let us know your convenient place & 
> time to meet Richie. In each country he would like meet most of our 
> community members.
> 
> /*Please drop a mail directly to *richie at vtiger.com* (and CC to 
> gopals at vtiger.com) with the following information:
> 
>     * Place
>     * Convenient Time
>     * Address & Phone No
> 
> Looking forward for your kind cooperation for making vtiger's first trip 
> to Europe a successful one!
> 
> Best Regards,
> *Gopal
> vtiger Team*
> ---
> S.S.G.Gopal
> +1 925 965 6387
> Skype: sripadag
> blog: http://blogs.vtiger.com

> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      



From natan.pereira at fator9.com  Fri Nov 10 12:26:28 2006
From: natan.pereira at fator9.com (natan.pereira at fator9.com)
Date: Fri, 10 Nov 2006 15:26:28 -0200
Subject: [Vtigercrm-developers] Adding a new field with radio button
Message-ID: <20061110152628.uw0gorykx0g088wk@webmail.fator9.com>

I am having some problems with a new field, what I want is:

Add two radios buttons (when I am registring a new Lead), that when  
one is selected  appers a especific field and when the other is  
selected appers other especific field.

I know how to do a field in database, but I dont know how to do the  
radio button and where I will put de progamming (if clause).

I will be glad with somebody could help me...



From neil.temperley at exemail.com.au  Mon Nov 13 05:27:24 2006
From: neil.temperley at exemail.com.au (Neil Temperley)
Date: Mon, 13 Nov 2006 21:27:24 +1100
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items and
	general column layout
In-Reply-To: <45532E0A.4050709@vtiger.com>
Message-ID: <000901c7070e$4fc70c90$6401a8c0@Nemrut>

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtiger-Neil.tar.gz
Type: application/x-gzip
Size: 88018 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061113/b242a0d8/attachment-0001.gz 

From lists.vtigercrm.com at callum-macdonald.com  Mon Nov 13 07:24:00 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Mon, 13 Nov 2006 19:24:00 +0700
Subject: [Vtigercrm-developers] Release naming (package naming)
In-Reply-To: <B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
References: <45516127.4030306@callum-macdonald.com>	<45516DF3.20809@pacific.net.sg>
	<B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
Message-ID: <455863E0.30509@callum-macdonald.com>

Remco, you're right, I'm confusing package naming with release naming.

The release naming documentation states "The vtigercrm project no longer 
produces Patches 
<http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/PatchSubmission> for 
distribution..." but there is a patch available here:
http://www.vtiger.com/index.php?option=com_content&task=view&id=30&Itemid=57

Who releases that patch? It's really the name of the patches that I 
think should be simplified, not the naming of the main releases.

Cheers - Callum.

Dhr. R.R. Gerbrands wrote:
> @ Nicholas,
>
> If you find it odd, you might want to wait using vtigercrm as we're in 
> the process of becoming mature. 
>
> @ Callum,
>
> What you are refering to is not release naming to my idea.
> But package naming.
> I think that's a bit confusing for more people,
> The release naming is still the same, in you example 5.0.2,
> depending on the target platform is you're suggested packet naming.
>
> I can agree with it, yet as our user are no newbee's the naming as 
> stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseNaming
> is enough, I would suggest adding a wiki page for the newbee's who 
> doesn't know what to download instead.
>
> Best regards,
>
> Remco
>
>
>
>
> Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:
>
>> I just found it odd that the naming issue is still being discussed till
>> today. Why isn't the standard set and enforced already?
>>
>> Callum Macdonald wrote:
>>> Hi Guys,
>>>
>>> I think the naming of releases should be simplified. I suggest Joomla 
>>> provides a good template to use (with one or two improvements):
>>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11
>>>
>>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
>>> from what version you can apply patch 2, and so on. I suggest we use 
>>> the 
>>> same method as Joomla. When a new version is released (5.0.2) then the 
>>> following files are released:
>>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>>> vtigercrm-5.0.2-full-windows.exe
>>> vtigercrm-5.0.2-full-linux.bin
>>> vtigercrm-5.0.2-full-lamp.tgz
>>>
>>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
>>> think it's important to include the windows/linux/lamp in the file 
>>> name. 
>>> I know it's obvious from the extension to MOST people, but not to 
>>> everyone.
>>>
>>> I also think these files should all be released in the same package in 
>>> sourceforge. In my opinion, splitting the full and patch releases is 
>>> confusing.
>>>
>>> I think this is a HUGELY important issue, as important as the recent 
>>> heated debate over the naming of the GA release.
>>>
>>> Comments on a postcard...
>>>
>>>
>>> Callum.
>>> _______________________________________________
>>> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>>>
>>>
>>
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
> Dhr. R.R. Gerbrands
>
> Artoge 
>
> ICT Security & Administration
> Jachthoornstraat 59
> 6219 BN  Maastricht
>
> kvk 14083961
> btw 155595106B01
>
> t:    +31 43 325 0316 
> m:  +31 6 2127 8082
> e:   remco at artoge.nl <mailto:remco at artoge.nl>
> i:    www.artoge.nl
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 



From remco at artoge.nl  Mon Nov 13 12:33:15 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 13 Nov 2006 18:33:15 +0100
Subject: [Vtigercrm-developers] Release naming (package naming)
In-Reply-To: <455863E0.30509@callum-macdonald.com>
References: <45516127.4030306@callum-macdonald.com>	<45516DF3.20809@pacific.net.sg>
	<B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
	<455863E0.30509@callum-macdonald.com>
Message-ID: <AFD411F9-259C-45D4-AE90-C46863E8ECFB@artoge.nl>

Hi Callum,

I see what you mean:

LAMP/WAMP download (6.1 MB/tar.gz)
v5.0 Patch 2  download  (0.65 MB/tar.gz)

I agree, that's not a propere release naming, reading blog: http:// 
www.vtiger.com/blogs/page/7/  that was handle by Philip and Mickie.
Looking at: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
ReleaseNaming and seeing tar.gz I think they should name this: "LAMP/ 
WAMP update from 5.0.1 to 5.0.2"

Cheers, Remco




Op 13-nov-2006, om 13:24 heeft Callum Macdonald het volgende geschreven:
> Remco, you're right, I'm confusing package naming with release naming.
>
> The release naming documentation states "The vtigercrm project no  
> longer
> produces Patches
> <http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/PatchSubmission> for
> distribution..." but there is a patch available here:
> http://www.vtiger.com/index.php? 
> option=com_content&task=view&id=30&Itemid=57
>
> Who releases that patch? It's really the name of the patches that I
> think should be simplified, not the naming of the main releases.
>
> Cheers - Callum.
>
> Dhr. R.R. Gerbrands wrote:
>> @ Nicholas,
>>
>> If you find it odd, you might want to wait using vtigercrm as  
>> we're in
>> the process of becoming mature.
>>
>> @ Callum,
>>
>> What you are refering to is not release naming to my idea.
>> But package naming.
>> I think that's a bit confusing for more people,
>> The release naming is still the same, in you example 5.0.2,
>> depending on the target platform is you're suggested packet naming.
>>
>> I can agree with it, yet as our user are no newbee's the naming as
>> stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
>> ReleaseNaming
>> is enough, I would suggest adding a wiki page for the newbee's who
>> doesn't know what to download instead.
>>
>> Best regards,
>>
>> Remco
>>
>>
>>
>>
>> Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:
>>
>>> I just found it odd that the naming issue is still being  
>>> discussed till
>>> today. Why isn't the standard set and enforced already?
>>>
>>> Callum Macdonald wrote:
>>>> Hi Guys,
>>>>
>>>> I think the naming of releases should be simplified. I suggest  
>>>> Joomla
>>>> provides a good template to use (with one or two improvements):
>>>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/ 
>>>> frs.joomla_1_0.1_0_11
>>>>
>>>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not  
>>>> clear
>>>> from what version you can apply patch 2, and so on. I suggest we  
>>>> use
>>>> the
>>>> same method as Joomla. When a new version is released (5.0.2)  
>>>> then the
>>>> following files are released:
>>>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>>>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>>>> vtigercrm-5.0.2-full-windows.exe
>>>> vtigercrm-5.0.2-full-linux.bin
>>>> vtigercrm-5.0.2-full-lamp.tgz
>>>>
>>>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0- 
>>>> patch2.zip?download>I
>>>> think it's important to include the windows/linux/lamp in the file
>>>> name.
>>>> I know it's obvious from the extension to MOST people, but not to
>>>> everyone.
>>>>
>>>> I also think these files should all be released in the same  
>>>> package in
>>>> sourceforge. In my opinion, splitting the full and patch  
>>>> releases is
>>>> confusing.
>>>>
>>>> I think this is a HUGELY important issue, as important as the  
>>>> recent
>>>> heated debate over the naming of the GA release.
>>>>
>>>> Comments on a postcard...
>>>>
>>>>
>>>> Callum.
>>>> _______________________________________________
>>>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>
>> Dhr. R.R. Gerbrands
>>
>> Artoge
>>
>> ICT Security & Administration
>> Jachthoornstraat 59
>> 6219 BN  Maastricht
>>
>> kvk 14083961
>> btw 155595106B01
>>
>> t:    +31 43 325 0316
>> m:  +31 6 2127 8082
>> e:   remco at artoge.nl <mailto:remco at artoge.nl>
>> i:    www.artoge.nl
>>
>>
>> --------------------------------------------------------------------- 
>> ---
>>
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061113/a73c5675/attachment-0002.html 

From jamestillman at sevatechnologies.com  Tue Nov 14 09:20:08 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 06:20:08 -0800
Subject: [Vtigercrm-developers] Bug in soap/vtigerolservice.php
Message-ID: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>

The vtiger forums are down, and there is no immediately obvious way to
log bugs for vtiger, so I'm resorting to subscribing to your mailing to
report a bug.
 
Using version 502.
 
On line 754 in soap/vtigerolservice.php, there is this code:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.$account_name."'";

Besides being an invite to a sql-injection attack, this also creates
problems for the Outlook plugin when a contact in Outlook has a company
name with an apostrophe in it, and that contact does not yet exist in
vtiger.  The contact John Smith, with Bob's Pool Hall in the company
name, for example, will create the very unhelpful "Invalid return value
from vtigerCRM" error message when you attempt to sync using the Outlook
plugin.
 
Modifying line 754 to read:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.addslashes($account_name)."'";

while not the best option for a fix, does cause the contact sync to
begin working even with apostrophes in the company name.
 
jpt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/e0d8863f/attachment-0002.html 

From jamestillman at sevatechnologies.com  Tue Nov 14 09:44:32 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 06:44:32 -0800
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
Message-ID: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>

((If someone would fix the forums registration, I'll gladly start
posting these issues on the forums if this is not the correct venue.
Until then, I assume reporting in some way is better than not reporting
at all.))
 
modules/Emails/Emails.php seems to be lacking some key class-level
fields.  Namely, these:
 
var $rel_users_table = "vtiger_salesmanactivityrel";
var $rel_contacts_table = "vtiger_cntactivityrel";
var $rel_serel_table = "vtiger_seactivityrel";

It makes use of these fields in its code, as in the function
set_emails_contact_invitee_relationship(), but they are not set anywhere
in the class.
 
This problem comes to light when you attempt to use the Outlook plugin
to link emails to a vtiger contact.  You get the typical "Invalid return
value from vtigerCRM" error message.
 
I inserted the lines mentioned above at line 38 in Emails.php and
Outlook email linking started to work.
 
Most of the Outlook interaction with vtiger in v502 seems to be sadly
broken out of the box.
 
By the way, anyone thought of improving the Outlook plugin to do
something other than stupidly report that vtiger returned an invalid
response?  Having to use Fiddler or some other HTTP inspection utility
to just to find the PHP error message from vtiger is time-consuming.
 
jpt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/ae70ce49/attachment-0002.html 

From remco at artoge.nl  Tue Nov 14 09:58:53 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 15:58:53 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
Message-ID: <86206992-3704-444F-8FB0-96CF3A4437FB@artoge.nl>

James,

Even the forums, aren't the place to report a bug, instead that  
should be done within Track

First see: community tab.
Gives http://www.vtiger.com/index.php? 
option=com_content&task=view&id=86&Itemid=133

Then bug tracker, you will need a track login.
Gopal is your man to provide you with a login, ask him:  
gopals at vtiger.com

Thanks for reporting any issues,

Best regards, Remco



Op 14-nov-2006, om 15:44 heeft James Tillman het volgende geschreven:

> ((If someone would fix the forums registration, I'll gladly start  
> posting these issues on the forums if this is not the correct  
> venue.  Until then, I assume reporting in some way is better than  
> not reporting at all.))
>
> modules/Emails/Emails.php seems to be lacking some key class-level  
> fields.  Namely, these:
>
> var $rel_users_table = "vtiger_salesmanactivityrel";
> var $rel_contacts_table = "vtiger_cntactivityrel";
> var $rel_serel_table = "vtiger_seactivityrel";
> It makes use of these fields in its code, as in the function  
> set_emails_contact_invitee_relationship(), but they are not set  
> anywhere in the class.
>
> This problem comes to light when you attempt to use the Outlook  
> plugin to link emails to a vtiger contact.  You get the typical  
> "Invalid return value from vtigerCRM" error message.
>
> I inserted the lines mentioned above at line 38 in Emails.php and  
> Outlook email linking started to work.
>
> Most of the Outlook interaction with vtiger in v502 seems to be  
> sadly broken out of the box.
>
> By the way, anyone thought of improving the Outlook plugin to do  
> something other than stupidly report that vtiger returned an  
> invalid response?  Having to use Fiddler or some other HTTP  
> inspection utility to just to find the PHP error message from  
> vtiger is time-consuming.
>
> jpt
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/564d4cad/attachment-0002.html 

From jamestillman at sevatechnologies.com  Tue Nov 14 10:25:50 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 07:25:50 -0800
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <86206992-3704-444F-8FB0-96CF3A4437FB@artoge.nl>
Message-ID: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>

Thanks, Remco.  I had assumed that the bug tracker was the way to go,
but saw no way to sign up for vTiger's Trac.
 
I clicked on "Bug Tracker" in the Community section and got this page:
 
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report
 
which has no information on signing up.  Clicking "vTiger Trac" in the
community section is also a dead end for bug reporters, it seems.
 
Did I miss something obvious?
 
By the way, is there any way to search by keyword in Trac?  Not easy to
determine if a bug exists if you have to scan the whole bug database.
 
jpt


________________________________

	From: vtigercrm-developers-bounces at lists.vtigercrm.com
[mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf Of
Dhr. R.R. Gerbrands
	Sent: Tuesday, November 14, 2006 9:59 AM
	To: vtigercrm-developers at lists.vtigercrm.com
	Subject: Re: [Vtigercrm-developers] A bug in
modules/Emails/Emails.php
	
	
	James, 

	Even the forums, aren't the place to report a bug, instead that
should be done within Track

	First see: community tab.
	Gives
http://www.vtiger.com/index.php?option=com_content&task=view&id=86&Itemi
d=133

	Then bug tracker, you will need a track login.
	Gopal is your man to provide you with a login, ask him:
gopals at vtiger.com

	Thanks for reporting any issues,

	Best regards, Remco



	Op 14-nov-2006, om 15:44 heeft James Tillman het volgende
geschreven:


		((If someone would fix the forums registration, I'll
gladly start posting these issues on the forums if this is not the
correct venue.  Until then, I assume reporting in some way is better
than not reporting at all.))
		 
		modules/Emails/Emails.php seems to be lacking some key
class-level fields.  Namely, these:
		 
		var $rel_users_table = "vtiger_salesmanactivityrel";
		var $rel_contacts_table = "vtiger_cntactivityrel";
		var $rel_serel_table = "vtiger_seactivityrel";
		
		It makes use of these fields in its code, as in the
function set_emails_contact_invitee_relationship(), but they are not set
anywhere in the class.
		 
		This problem comes to light when you attempt to use the
Outlook plugin to link emails to a vtiger contact.  You get the typical
"Invalid return value from vtigerCRM" error message.
		 
		I inserted the lines mentioned above at line 38 in
Emails.php and Outlook email linking started to work.
		 
		Most of the Outlook interaction with vtiger in v502
seems to be sadly broken out of the box.
		 
		By the way, anyone thought of improving the Outlook
plugin to do something other than stupidly report that vtiger returned
an invalid response?  Having to use Fiddler or some other HTTP
inspection utility to just to find the PHP error message from vtiger is
time-consuming.
		 
		jpt
		
		_______________________________________________
		Reach hundreds of potential candidates -
http://jobs.vtiger.com 


	
	Dhr. R.R. Gerbrands

	Artoge 

	ICT Security & Administration
	Jachthoornstraat 59
	6219 BN  Maastricht

	kvk 14083961
	btw 155595106B01

	t:    +31 43 325 0316 
	m:  +31 6 2127 8082
	e:   remco at artoge.nl
	i:    www.artoge.nl



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/79c869d9/attachment-0002.html 

From remco at artoge.nl  Tue Nov 14 11:33:25 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 17:33:25 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
Message-ID: <6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>

Hi James,

No, you didn't miss something. Your right, it's not easy to see how  
to report a bug, theseday's something more to-do, if I only had the  
time :-(


Yes you can search within track:
1) on the upper right use: Custom Query
After clicking it:
2) use [Add filter] and
3) select a filter option (includes also Keywords)

Best Regards,

Remco



Op 14-nov-2006, om 16:25 heeft James Tillman het volgende geschreven:

> Thanks, Remco.  I had assumed that the bug tracker was the way to  
> go, but saw no way to sign up for vTiger's Trac.
>
> I clicked on "Bug Tracker" in the Community section and got this page:
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report
>
> which has no information on signing up.  Clicking "vTiger Trac" in  
> the community section is also a dead end for bug reporters, it seems.
>
> Did I miss something obvious?
>
> By the way, is there any way to search by keyword in Trac?  Not  
> easy to determine if a bug exists if you have to scan the whole bug  
> database.
>
> jpt
>
> From: vtigercrm-developers-bounces at lists.vtigercrm.com  
> [mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf  
> Of Dhr. R.R. Gerbrands
> Sent: Tuesday, November 14, 2006 9:59 AM
> To: vtigercrm-developers at lists.vtigercrm.com
> Subject: Re: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
>
> James,
>
> Even the forums, aren't the place to report a bug, instead that  
> should be done within Track
>
> First see: community tab.
> Gives http://www.vtiger.com/index.php? 
> option=com_content&task=view&id=86&Itemid=133
>
> Then bug tracker, you will need a track login.
> Gopal is your man to provide you with a login, ask him:  
> gopals at vtiger.com
>
> Thanks for reporting any issues,
>
> Best regards, Remco
>
>
>
> Op 14-nov-2006, om 15:44 heeft James Tillman het volgende geschreven:
>
>> ((If someone would fix the forums registration, I'll gladly start  
>> posting these issues on the forums if this is not the correct  
>> venue.  Until then, I assume reporting in some way is better than  
>> not reporting at all.))
>>
>> modules/Emails/Emails.php seems to be lacking some key class-level  
>> fields.  Namely, these:
>>
>> var $rel_users_table = "vtiger_salesmanactivityrel";
>> var $rel_contacts_table = "vtiger_cntactivityrel";
>> var $rel_serel_table = "vtiger_seactivityrel";
>> It makes use of these fields in its code, as in the function  
>> set_emails_contact_invitee_relationship(), but they are not set  
>> anywhere in the class.
>>
>> This problem comes to light when you attempt to use the Outlook  
>> plugin to link emails to a vtiger contact.  You get the typical  
>> "Invalid return value from vtigerCRM" error message.
>>
>> I inserted the lines mentioned above at line 38 in Emails.php and  
>> Outlook email linking started to work.
>>
>> Most of the Outlook interaction with vtiger in v502 seems to be  
>> sadly broken out of the box.
>>
>> By the way, anyone thought of improving the Outlook plugin to do  
>> something other than stupidly report that vtiger returned an  
>> invalid response?  Having to use Fiddler or some other HTTP  
>> inspection utility to just to find the PHP error message from  
>> vtiger is time-consuming.
>>
>> jpt
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/ef6bad09/attachment-0002.html 

From jtk at yahoo.com  Tue Nov 14 13:49:47 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Tue, 14 Nov 2006 13:49:47 -0500
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
Message-ID: <pan.2006.11.14.18.49.47.164625@yahoo.com>

Dhr. R.R. Gerbrands wrote:
> Your right, it's not easy to see how to report a bug, theseday's
> something more to-do, if I only had the time :-(

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart

now links to

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets

which links to

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess



From joestewart at users.sourceforge.net  Tue Nov 14 14:09:57 2006
From: joestewart at users.sourceforge.net (Joe Stewart)
Date: Tue, 14 Nov 2006 13:09:57 -0600
Subject: [Vtigercrm-developers] trac Account Manager Plugin
In-Reply-To: <pan.2006.11.14.18.49.47.164625@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
Message-ID: <455A1485.3090109@users.sourceforge.net>

on 11/14/2006 12:49 PM Jeff Kowalczyk said the following:
> Dhr. R.R. Gerbrands wrote:
>   
>> Your right, it's not easy to see how to report a bug, theseday's
>> something more to-do, if I only had the time :-(
>>     
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart
>
> now links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets
>
> which links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess
>
>   

Just a side note.  There is now an Account Manager Plugin for trac that 
allows users to register for an account:

http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin

Joe


From remco at artoge.nl  Tue Nov 14 14:26:49 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 20:26:49 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <pan.2006.11.14.18.49.47.164625@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
Message-ID: <314E9A1B-3A8C-4EE8-8B59-E2749627A2D8@artoge.nl>

Thanks, Jeff :-)

remco

Op 14-nov-2006, om 19:49 heeft Jeff Kowalczyk het volgende geschreven:

> Dhr. R.R. Gerbrands wrote:
>> Your right, it's not easy to see how to report a bug, theseday's
>> something more to-do, if I only had the time :-(
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart
>
> now links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets
>
> which links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/e739431f/attachment-0002.html 

From jtk at yahoo.com  Tue Nov 14 15:38:16 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Tue, 14 Nov 2006 15:38:16 -0500
Subject: [Vtigercrm-developers] trac Account Manager Plugin
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
	<455A1485.3090109@users.sourceforge.net>
Message-ID: <pan.2006.11.14.20.38.15.301337@yahoo.com>

Joe Stewart wrote:
> Just a side note.  There is now an Account Manager Plugin for trac that
> allows users to register for an account:
> 
> http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin

That, and the WebAdmin plugin, which will eventually be part of Trac core:
http://trac.edgewall.org/wiki/WebAdmin

Trac is currently at release trac-0.10.2, BTW. We're running trac.0.9.5.



From jeri at vtiger.com  Wed Nov 15 01:28:51 2006
From: jeri at vtiger.com (Jeri John)
Date: Wed, 15 Nov 2006 11:58:51 +0530
Subject: [Vtigercrm-developers] Bug in soap/vtigerolservice.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
Message-ID: <10eea4db828.-8020503555403603074.-7158338222294584874@@vtiger.com>


Dear James,
              Thanks for your fix.We have integrated this and checked in to SVN.
The revision is 9840.

Thanks & Regards,
Jerry.


---- On Tue, 14 Nov 2006 James Tillman <jamestillman at sevatechnologies.com> wrote ---- 

The vtiger forums are down, and there is no immediately obvious way to log bugs for vtiger, so I'm resorting to subscribing to your mailing to report a bug.
 
Using version 502.
 
On line 754 in soap/vtigerolservice.php, there is this code:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.$account_name."'";

Besides being an invite to a sql-injection attack, this also creates problems for the Outlook plugin when a contact in Outlook has a company name with an apostrophe in it, and that contact does not yet exist in vtiger.  The contact John Smith, with Bob's Pool Hall in the company name, for example, will create the very unhelpful "Invalid return value from vtigerCRM" error message when you attempt to sync using the Outlook plugin.
 
Modifying line 754 to read:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.addslashes($account_name)."'";

while not the best option for a fix, does cause the contact sync to begin working even with apostrophes in the company name.
 
jpt

_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061115/32ed6281/attachment-0002.html 

From fboudra at gmail.com  Wed Nov 15 05:14:40 2006
From: fboudra at gmail.com (Fathi Boudra)
Date: Wed, 15 Nov 2006 11:14:40 +0100
Subject: [Vtigercrm-developers] trac Account Manager Plugin
In-Reply-To: <pan.2006.11.14.20.38.15.301337@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<455A1485.3090109@users.sourceforge.net>
	<pan.2006.11.14.20.38.15.301337@yahoo.com>
Message-ID: <200611151114.40395.fboudra@gmail.com>

Le mardi 14 novembre 2006 21:38, Jeff Kowalczyk a ?crit :
> Joe Stewart wrote:
> > Just a side note.  There is now an Account Manager Plugin for trac that
> > allows users to register for an account:
> >
> > http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin
>
> That, and the WebAdmin plugin, which will eventually be part of Trac core:
> http://trac.edgewall.org/wiki/WebAdmin

Web admin plugin is already installed. are you interested by adding 
AccountManagerPlugin if it isn't a duplication of webadmin in terms of 
functionnality ?

> Trac is currently at release trac-0.10.2, BTW. We're running trac.0.9.5.

in TODO list concerning infrastructure:
* update gforge
* update trac

just, i lack of time atm. We'll do asap.

cheers,

Fathi



From jens at Strawberry.COM  Wed Nov 15 06:40:42 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Wed, 15 Nov 2006 12:40:42 +0100
Subject: [Vtigercrm-developers] [FEATURE REQUEST] Support Multiple
	SalesOffices
In-Reply-To: <20060825232016.F13092@Strawberry.COM>;
	from Jens Hamisch on Fri, Aug 25, 2006 at 11:20:17PM +0200
References: <3E26E7A199CABA49822B3E6B741434F97D0914@exch.accuratetechnologies.com>
	<20060817165659.B21264@Strawberry.COM>
	<20060818091439.U2464@Strawberry.COM>
	<20060825232016.F13092@Strawberry.COM>
Message-ID: <20061115124042.D4158@Strawberry.COM>



Hi Dennis,
hi *,


it took a while to check everything out and finally to upload
my changes to the SVN, but now I finally managed to do it.
The feature branch 5.1_jens now contains a copy of 5.0.2 plus
the following changes:

    FCR 2035 - Multi Organization and Organization Units support
    Postgres 8.1 support (5.0.2 does not contain all required
	patches)
    FormLetter support (Campaign reports may utilize the contacts
	as secondry table to generate a list of addresses to be
	used as form letter database in openoffice/staroffice/etc)
    Some bugfixes regarding vtiger 5.0.2 
    Account-Contacts filter on SalesOrder-, PurchaseOrder-, Quote-
	and Invoice-Popups): If an account is specified, the popup
	shows only tho contacts related to that account. May be over-
	ridden in the popup).

This version is based on vtiger 5.0.2.
It is almost a snapshot of my working vtiger copy.
It runs stable in the following environment:

    Solaris 10 (Sparc 64 bit)
    Apache 2.2.2
    PHP 5.1.4
    Postgres 8.1.2 (with perl 5.8.7 backend)

It is currently available on SVN only

    svn checkout http://vtiger.fosslabs.com/svn/vtiger/vtigercrm/branches/5.1_jens


The branch also consists of a SQL-Script to migrate an existing database
from 5.0.2 to 5.1_jens:  schema/502To51Jens.sql
This script offers the opportunity to use 5.1_jens on an existing database.
However, I strongly advise to produce and save a backup before doing so.

You may also start on an empty database using the usual installation
prodcedure.

If you start from scratch and populate the database with your entities
(e.g. using a SQL dump from your productive database), you'll have to
adjust the organization assignment before using the database as follows:

    INSERT INTO vtiger_entity2org
	SELECT 'vtiger', crmid, '1' FROM vtiger_crmentity;

Replace 'vtiger' by your organizationname in this case.


I'd appreciate any comments on my addons.

Kind regards,
Jens




On Fri, Aug 25, 2006 at 11:20:17PM +0200, Jens Hamisch wrote:
> Hi Dennis,
> hi *,
> 
> I've opened a feature change request in trac on this: #2035.
> Attached please find a proposal describing the required database
> and GUI changes.
> 
> I'm on vacation for the next 2 weeks, so IMHO I could start
> working on this enhancement based on the GA aftar my return.
> 
> 
> Kind regards
> Jens
> 
> 
> 
> On Fri, Aug 18, 2006 at 09:14:39AM +0200, Jens Hamisch wrote:
> > 
> > Hi Dennis,
> > hi *,
> > 
> > 
> > I'd like to post a proposal for an implementation of this feature.
> > In advance there's one item unclear to me:
> > 
> >     What is the "official" procedure to add items to the
> >     vtiger_tab and vtiger_field tables?
> > 
> > As I'd  suggest the introduction of new tables, there should be a
> > new table identifier on those. I'd like to ensure not to get into
> > conflict with other addons and the ongoing process from RC to GA.
> > So how do I "reserve" unique table ids? And is there a space for
> > private tables (if someone adds private stuff)?
> > 
> > 
> > Jens
> > On Thu, Aug 17, 2006 at 04:56:59PM +0200, Jens Hamisch wrote:
> > > Hi,
> > > 
> > > > I also agree that there may be a default sales office for
> > > > sub-organizations, but I don't thing that sub-organizations is a
> > > > prerequisite for having multiple sales offices.
> > > 
> > > yes ...
> > > 
> > > The problem I have, that I need support for more than one entire
> > > organization. So my point of introducing organizational units was
> > > to split this off the organization table. The wording doesn't matter
> > > at a first glance. A 'sales office' or 'location' would just be
> > > some abstract part of an organization.
> > > 
> > > > Jens, are you going to work on this?
> > > 
> > > Yeah.
> > > 
> > > > I'm going to be offline for a week (military exercise) so I won't be
> > > > able to work on it for a little bit.
> > > 
> > > Have fun!
> > > I hope to able to present something to you ehen you'll be online again.
> > > 
> > > -- Jens
> > > 
> > > --------------------------------------------------------------------------------
> > >      /
> > >  +##+|##+   STRAWBERRY                     Jens Hamisch
> > > +v#+v v##+  EDV-Systeme GmbH               Managing director
> > > / v    v\v
> > > | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> > > |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
> > >  | .     |                                 Fax:          (+49 8171) 41805-59
> > >  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
> > >   \____/    Strawberry at Strawberry.COM      
> > > 
> > > _______________________________________________
> > > Get started with creating presentations online - http://zohoshow.com?vt 
> > 
> > -- 
> > 
> > --------------------------------------------------------------------------------
> >      /
> >  +##+|##+   STRAWBERRY                     Jens Hamisch
> > +v#+v v##+  EDV-Systeme GmbH               Managing director
> > / v    v\v
> > | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> > |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
> >  | .     |                                 Fax:          (+49 8171) 41805-59
> >  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
> >   \____/    Strawberry at Strawberry.COM      
> > 
> > _______________________________________________
> > Get started with creating presentations online - http://zohoshow.com?vt 
> 
> -- 
> 
> --------------------------------------------------------------------------------
>      /
>  +##+|##+   STRAWBERRY                     Jens Hamisch
> +v#+v v##+  EDV-Systeme GmbH               Managing director
> / v    v\v
> | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
>  | .     |                                 Fax:          (+49 8171) 41805-59
>  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
>   \____/    Strawberry at Strawberry.COM      
> 

> %PDF-1.4
> %????
> 1 0 obj
> << /Length 2 0 R
>    /Filter /FlateDecode
> >>
> stream
> x??Y??\'?_i???\L??#E?v??^?]?/??U5S?????g&?V???V????m??H????_B
> y?"Zu??m??U??F?Y~??O???=???ya%`^~??WB)??Q??J?????wJ
~|+???I_?7?)??<?O??<O?f?<N?f
??v
> U?|$?*??|???*???gX???????'????BSb??k?a????/+?mO???u?????
?x??(
?
???????B??0?W\??g?
1J
?h?T?iH?gZ?g???5y?,1d?o???"?dP???????eR5+?*1W~????3?C?X?Y?\S?G??lWft??$}k????L????M?${?
??9?????6P?
?
?WK???Z{?6???F
??
??pC?E
K?y
t???}|C~???C?`1F?S?QF?A?? ???r?56?L???F?
> ?_A?m`D?
???v|?u|P????_???F0??Kl\??8F?o??zV;k??$?(?m_?qC*??????)
XJ??)??@?=?$?????????5?y?M?w?pWv
?/|?Jy???[???$??W?O??#%??x?):??eU?????T??H0?Zxx??JKOu???C?mJ"???????H???`X}11?.E??g??X??w ?
???j???Y??"!?Tkh?.???	FVNxV:?uge??ov*]?'?L)JR???P???????Y?d
???pX??l??s???oB=Pf?RV4&??d
??[JH??K@????X?u?)????y????K?S????9??
??j?
\?F`s
8?46&
??S???????2?Ru???Ba/#???F11b???{?????!2<?s????n????????iP
??d????
z6=0)??z?xdW?[.Il??b???iu????????O???#?<??M?|
N??r???\???9H???????T?????????d3?]??U
?-????+??2I?<???.?u?5??-j??????Z?I@?|?~M????Z$?"??&S??a=?q,?Zc???R0?\j?e????_]??ia??-??|?CQ?>?wR??????J?/?BB}???phOe?????<3?R??????^?*Fn? ?`??I?4??X???)U?5?un>??1?cY
b???,?D>??	?????`=B/U??o??1/?d<}?5???T3?w^??
?n2c?-???x?;?
|0y=
o???zt?wC?
?????_>?kx?Mcl?y??
Y&3_???:????i?????9???I(j??1?????o
?Mo?e???t?2??ve?G??{?l-?Du????r?????HS
LJ?h?sF??&S+????P?F5CK?:?;???8nT-4???6?WP??z?X?????9mh8??s????
V?J?}??5????P?w?=%??7{J??T???????.=^%J??'??????I[??(?>wIR?p
> ?r?W:J[??5?
??<v&??P
3Y???:???????E&??l?+Q???????TFK?9f?6k??L?s??*???w????l??cT?????/1???Do???f?r1?
?W?B?K????????no??
1??;?9[ZFv??^???2*?9?e??U?-??*?2QV???g??J?&????lb????}??????.?_}
{?>????????8??T????????x??
endstream
> endobj
> 
> 2 0 obj
>   1713
> endobj
> 
> 4 0 obj
> << /Length 5 0 R
>    /Filter /FlateDecode
>    /Length1 9796
> >>
> stream
> x??z{|T???Z{???={?{&?d?0&<?0I?0	?C#??@F'O????p?"	???9
j-z????p?`??z?h=???U???Xs????:???=CDk?????????;?^?z?{/?????E;A???5mO?
>??)B?X??KJ????_????a??
??!r!??aSO??A?&??/!d???PSo?~?U?2v?s??A??X
?SP??is??;?T?
?;P???????P=??&?/?\s???
????fs????!??????????f???????u4??????m1oB??>Z at yZg??
> ?J?????h0?????Hs?gd?$??????O??u#?7???d???_~??????e
> ????.?J???2?
?i??h???h???|??[
o?h??<????d1z?@???It
???:?6t?`z?=t<f?S?	u1G?
Z?j?m??^F????ss
> f???r}?rfzgL?65;?6?????Hw?9?6??l2DA??j?*???X?`4???*?9^?????I???Z??,?Sw?2???I?_?g|??9Y?3???2???t?c???2??9??.??vJM*?o??6?
???a???#J????)???4?E?E
?????Z?0?v?-?2????;? ?.gf???1Y?Zb??0 ???????95q~??]???LI??E1
???
????tl???=?DT?j?=?5?????"Y?Mk(K)?????'?H?M??????)_?b??????ZT9?>???,???%0b????d???,?????{???[{??[UUe?K=? ,V?RG??rf&??b@}?
??RC?,m??dZ??4?CK?@05??Q?????????????b?5r??????[\?jJ
?
V?	/?r'??|U?"J??f?3)???p?JovJ??;`??T'???J?K?
s?`?\Yy?Uf?9+?e?
i??(???????R?j????#??y????e
?l0<XsjbG?G=???/l+
????0????!g?lOUL7?y?{?
e?*??nC??j??*?????
.??
????T?%`???*'????kO?T?@q???Sl?<j?;??E)????9t*?j??qwe?.?Z?q?yA
a?s?f?e-??q?grz???(?TKL?=?'?VSi?????
???iQ%q2UI?q???`?E1??i?A??????q???EU?h@??????u?R???$[?'E?Z? ?(???6d?C??;8?gZ"@ ??&??z??zdj??
> '"*?????}??x</??7???3????q?????=`????X_?u??N??gf?
AZ3?)&?!v:Q}P#f
> B?Z,

?
?W?1??-?cd?a??1??H??-kI???F?f??K	???????????*?????7?#>???????m?????L??.?m??-Y??l???{??{ql?3?c/???????G?k????~i??m???~??=o`?z?b???4K???p#?
t?QA????J?	!?QP??~?3?
?M@]???8*.*.??J??2??o?Z
?l?A
%l??????DEC??3d?{??o??e?{{????g`??u?"??AW?bzZ?E???????N??q6???w?8?=??e?r?J<5?YP?? ?JO??";?6????9`
> ?
??dE
????!:??MA?
z?F???0DE??g~/??L?8??
??2???
??x:??;???|?!????n?zQ?\)
7?
> 
	y??Y^}D???(?????=?J?b?P?X?V
?TbkV~7P???2???
~zC?????????U;J.?Y4w??????U-?V?X??%???????a??~?????jP~0??'?{??Z??J?(???2't*?W?C?,?D??J?HV??????l???_|r?21?.1??S\w? ?r`?:YRq#/?/O[??1m{?Pgry\?L?HX!T,??#?3?b?ff???????L?x???S??L??t??)???9.??]?=?`,:
S?w?????wDV?Q????)????????o?(?T???e???B!l0????????@?`6(]
?u&C
> ?r???\??e?O??tE?;"???
???????\??
V?1?
fz????:-?z]o?????????J?N???	6????-\
> \?
?'GP&?,?bq????R?_?W8?Q?2"V?Q???K?E,?Z??o?b?~?12?????F??4????v??
@@q?x!???	??
6qQQ^.?S&-??????e?v??H??U?
?-8qb??h???????{+??'??z?gvI????={??????;??\?A}VpN?

t?????`?Q+?^?JE?(H?U???!!(0BR?)e????S??&?G???93???'8???????3nOD?h?Zz'??t?????,?l
 j?zCm??]Pg?t*?1	#*q
???d/5?5??=?n?3F??6????C???P	?? [c^n??B??N????wG?51??O???
???????o??????jg??*??k???~?????L?e?Y+??VT???~????7?6'-Jv{?b1??/G?J&??"??????[r??????	0??C?O???6l_?4??????9?????r?p??4???6c??.?N?L?????6#?4????z?H????d23I
????K??:S?
??d?<^?U???O???m?G?1??jN????C???H+?%?5??}\?9?b>?.?????B?B_?12?????H?????????????c*??R?????}?G_???H??j%?	?<?^???{????-?$q??_={v[?????_~?s?#???v??????????m55???4??k??M?Pv???~?3?a"!??|??p??p?6??{?q!?????I?=?#???G	?%?PmUN?@|??e??`?z???0?C+??????1??BX30?0&v,?bR
???"???r??|! '?3R???0?E.?(?O??z?P|?8??????/g?y?r
? {
?????sq?8?Z?-Sp^?%???0o?
#?	?6?(????u??? b?U
U??:????'??????x?@Va?Aa1???`6?(??????|?xU?9???kW7????I?G????
??s?>?c?C?????VO?
&?
??w?9?p?+?1???:S???(???,\)??[ko?r??t???1=???@I/?8jI?P?P>?8N?'D?9?Jnds?
?+??j??UIJ??
> ?t?{?z??u?3??,???"?yB?{c8??y?z?G????~t??
l?z???????c?5D?$????v?mh~p?xl^s??R*,?T?*U#iV)-+???C?8??'?????Dh<?|?L	D????d1#?????,??????????!??z?
> ?s?#\?x
??hL\?w#
?y?h??%~v?????????>??{?5??????m?:#p]5??????????2?	*p?G?9?-

?A??k?z??
m?????;I???jzj?????.????{
?By?=l-s5?6?m?n?2?7?i??f?l?b??F???h?
??Z7?<?jsd0?|2?%?u?M?8_T??E6l?e?

?u???? ???`zTB?(??????????C??O:#?

> !?Cv%?0ZvJ~??XT?e???x?T7x
?NY??????l<?K}!w???????g??X??o????j??\???o~]}??+?bYS??+74?TwC??????????u??-?
> s????SK??O????s??????7??-	??di???s??Kn?M?g?.?*P ???	\?x3X	3??,0<?CA
?c>?M?1>???m?-^b????_?
?*?G??????
d???
> dA??fn??j???????j????M?	6ee
??2??x???r
??2)H?f1?+?'????????N?b{????????%???a
TE??`+&??n?_????m???g?#H4???a?lLk
u?%/9???,?XP??dwE?F???v????7?5??????;~=td`??????o_}%?'????;x???=?3z?RW?E??j??????0?).T6)YV?R5??`???1????P??}
> dV(?/y?
> bCx
?
?T?$
B,Ks???!????vSN??r!
\*?
???!n?
'?T?e?_=!?*???????Q| Q????<P??????S?Ieb
?????:?`%FaT%"???3h?Cy?y|2???&	??
??
8?m?????db?O7???Mk?y??e3??F?
f??
> ???m????^9K]?
?/??)A?J?D?D?B??	B??????x?!??A?F^&BD??Z???c.???e?(e??k?g?,<??Om{??Om?l?<????3??&??N???Y?0?????????s
> ??At\?n???~?0z?(L1?????Uf?
?7^?1B???C????I?*N??P273?z?=?d?"='??:?n??V?<?D????G:!g???"????M?);??N????>'u?I?r?'U????'?<??3'
?V??~??G
> =?????9???6W?????Jx/a^2?.?Y?Y?/?y??_?s??%o??	vp?????B at uj???R@??????0~?`2&d?Vaw:3??F?Z??
#>@??,acI??	?j???A?eOz????%?Y?B??J?~??K+??????????ujA?{???#=?<???/?~?z?????????fY?=?my??j5?~I???ucz?7?j?]4
??u/?????sU??a?F?4?C??8?3 ?????A?&??+??6?Q????4+??x???t????+???H?YqQ?H???[???-
???????Yx??iW<xb'??s?q????????q0??K?????j??J?R?b?]h??&
?B?C0?T?458???^?{Q??U*H<??*
a#?? )??
,	5?"?(|6???CrK
??U??P)??b?????????_?G??c??k?~<z-?^??p4???c???
?,q??_N\JF??K??=8????'2[5[??%
kd%T????ZD??E??Y8?vUj8??W)?<
?g??0???
> 
1?h?j???
> V?h??"\???*??!?!??
?W??,?X????O P???2??9???C
????7?s???:s?Z?kr???$_?&???&.&Z
> ?$n?O4^??G????L_??
??????A?P?
??????X?#HfA??#`?$???Y?1???	??1?????rp???
> ?????7???"?z?? ??$?M??????@n??k$c??c?3o??$?#????c?	E?G??oe?????7X??v)?+'B?????
Ekb?-?Ea?????&f?????F??a
> !??
?????_@???I?
J?b???(??GQ5???0?
> dc???\?f???gFQ??@???v
k#K????'?cA????_p??e??^???&??	????>???{?a~!?????X?Q?@qU9MY???JS?R???)=h
?l? "??Q@
???F{E??I^????8???
?S8A.???????p????p
??!
+???;?*X????1?37R8??D??	ZH?R8???2
sh6iK?<?????N-n???????^??????Z?z:?74uIk????[Z?z??E?
m?
5]??[?????
???n??I?GwJ

?

[?gIK??uu???CRs?T#uu??7l???(?6??U???\?$m???j`?
??]

@U??????????????::?s??6??5?6to???\8G??WJu??V???I?????W??y???hs?(:h????????m???P=?j?^X
jEm?u?????Ze?+?o@???-???
8???+???
> ??C9)??????&x?[???k
P6@?U???\#?cW??[????????.y?z????ZQ??????p?&??j=P??3(e?]?d???j?g??-?g?z????	c?j7??????i(}k?*y?n??g?K?s??????f??q2?????zrSk?L?6??I???\??Jt
??Kh??????|???w\???)~?????w????????{??B?"????m?????w?%??x?N?N2???}????a<2Z??????%?|W???H??{?]???{????|W???|W?7?%??z????^?y?5?[???Vg?5??????YO)Q?????jK??jsnjul?bun?????b????fKzc?????hh2;?????X???q?}?{
?v?D
?z
"?OT+]?????}???G??
0P?t?D
???
??Q?j
?C???j??
> ??
???JW =|*?
?}??R`1??~?6?????????Y??9??~?t!{???,a?G/?
L??????;?t?Mg4?u?h?juz-??C?L^????B??u?W??yJ)T??\????c??h????	C??$??.????{???????0~?
> Zc?C??c:?@a\?n}?)?????O???????TYU????/_]k????S???*H???{Q?H?I=?4?Z???6%??1=@?????/Gt????????n????Q
> endstream
> endobj
> 
> 5 0 obj
> 6721
> endobj
> 
> 6 0 obj
> << /Type /FontDescriptor
>    /FontName /CAAAAA+GillSansMT
>    /Flags 4
>    /FontBBox [ -161 -229 1040 916 ]
>    /ItalicAngle 0
>    /Ascent 929
>    /Descent -230
>    /CapHeight 916
>    /StemV 80
>    /FontFile2 4 0 R
> >>
> endobj
> 
> 7 0 obj
> << /Length 383
>    /Filter /FlateDecode >>
> stream
> x?]??n?0E?H??????)BJ?F????LR?? ?,??
{iUu:??x?=?f????W??o?Bzul\???^}%? ??
?6?n?????e??_?.???????*?????K?oj?????a????wR??M????u_r??8?\?r
k>??sy!?~_M?????:Q???Um-??????$a???\?v?<???w??Y?c?Y?1Z?q??? ??# ?0????`??
??$,
k?=X`H[??<r??w;??	hG?'??IQ@??}2???
h??0??}Rt?'?M>}4}2
:??4}??M?]?X0??h???.????8?3F?w?????a?18??4N~??k;?M?oP??endstream
> endobj
> 
> 8 0 obj
> << /Type /Font
>    /Subtype /TrueType
>    /BaseFont /CAAAAA+GillSansMT
>    /FirstChar 0
>    /LastChar 34
>    /Widths [ 1000 250 479 500 384 277 729 426
>      770 219 437 500 500 280 500 500
>      500 500 823 395 426 416 333 551
>      666 509 219 323 500 323 458 250
>      500 719 437 ]
>    /FontDescriptor 6 0 R
>    /ToUnicode 7 0 R
> >>
> endobj
> 
> 9 0 obj
> << /Length 10 0 R
>    /Filter /FlateDecode
>    /Length1 9292
> >>
> stream
> x??:{|?U??~?$????N??|i(CI???j5?/???R?E?I???<Z??K?L????*?:??
?t??@??3?"??:+???(?3B???_Buw~???????{????9?:???H?6"VE??}w???_!?

?w????A??x??m????\0!D?!??|???9ew?!?L d??
?4
> g6+r??

???h?@?
hOm^?y??VM?C{?????????D(#???"w??k?e??mqudUt?R???1?m?
?1???kok??=?????A??
?0|?G(G????B?JSk?:^??&??j??;22?8EW???a?R???F?g??]?/M???@????^????5?????#4??yY?/??>?~?????i???a??????????~'??V???K???_
??y?
????F???8
E?VlD?P?P?????
> f?}?y???3<WN?"gZ?Tw?KtN??p??mV??d4?^????TJ?24
?????
?+<??U??j?_?N?????2\6???E_kg~?=e?}C????r??!T?N??@?l\'?U4??+b	{Yc8+????????"E???:??]M?????
Us???k??P?W
??R?;#a?$??
> -??@w9?#?/G?'?m???e?0c?	?,???c?`$??C3??o
P}??it7F???"@?!DgW4?9V7?	6????b?????9??
V}k?t??j?\?
	?	?'q
????????I???OL??????.R???????
> 7l?U??+6o??$O)
4?[??-BgE????i?*? O?h?D??????FwEc??4?{Y"X#W?fI?? ???.???#?<.?s%
=???????;?j??	?z?????H(?
6H?
bU??a?lRDg????????0???rU???b??(?????.???z?l?sD?Jwe????-V???#???????4~[EN??
U?G
???u	!???????
8\??K??KM&????
)????
> ??jj]"???:????5?'kbH`??A?)?EgO??,
?\?:???
??7?&?"?w<??^?#LF?]1?LF6^?\
v?)??0jN(?M????X?|U[???hr<a,??
T]?
4??<p?KV?Wx?A	/??'??
s????
<??"????????V??Ir?(r?Ap??B.?K?
??/6??F?F??\M|?
/????0?q'6???e??4e?i?e
l6KY?b??8??N??0???
A"??V?a??
O?n?{h????v?7d(.??@I?P(??	??3=}??????*?O
???????;w?/???????b
?w?-:??i???v1g _

?Z??z?4???<O
?x%?P? ????;^????~??K?>/
> ????<lv?M????????????]??
?KW|/~?X
???K?+o*:}???x?*|D:
?Zd?}H?x47??
> Z,E???P??????V??????\??j??N???h??A
????W{?????
> gQ y<?y?Y
~D)BzZ.+?????X:??%???'???f?4??P?@
?H0??`???????
??E??VW???ZmRc?Z?C?TZ?(gH?sI?Z?Cz?+?k??lN??ly?:
????af??&?`?d?,R?"?`?l???B?????d2???b???74???(?;?cc????t?b?g????C!?7????&???Z0?h
(
> ??,2??A??F??M:?k??JO{f?M?????:?.???1??????????H?m????N??Z????i?;]????oh???Yu?9???[^L4?????+???????k??D?&>ffB??GT?[???????AH???
?`P	???L?j
T	????k??J???Q?p~?? ???0|d??????<???P?,??!
?la?4wc:p?o?+?v????_?z??G?x???'p??
X??W?Ez???~??(??^0?}@#?2??B?3??ax???u#?p
N?|???~??g????Q???MWwT?.]?M:M'?O?k????	??L?
> ?0x?G??-? ?T)?-???F?F?]???<uP???S???VA??w?Vd??KDz
?D??p????J_H??J???????k??7?????+O????}8???N????#?M??\?<?
?????4?BqR?f?h???+8?q?d?k??F?7v ?????q4g????i?TX?r

?c???b?V?q?0?v?P%}:??X???.r??5?????1??
??Pm?K??<U+m?????F?A?t?v?	????????
???W??b???/Zx??(p??.4hs?F?WO%??i4??
> ?R	Z?P3i?Q???XR?ME??????d{?t?F?M?BBs4??IK{L+?????p?B?R@6p??`???MK?xY(]?>????R_???x?V??b?n????/??[?k???<8??}???6???v+M?!???V?????=^f?&???????%?t??
?|?s
> R??????{?9ob?4???}??%????y7?]???E????>?/-i?	??'c@?????&
?q?[e???????W?7Z?~^,6?????c?67?M-????}?y??????????|/=l7????*J??M8?1?J`_??????????B=!??B???O?tv
???,???7???IwI??O???\
k?????????%?????w??8??,?4??PT`??nf????|????S'??i:N??4?n?G??????O??o?????AT??????6????g'F??I??m?D:r??d??)?Z?????????K?U??C4?5?0??*M?^??6#C??`???GN?I9{??N?B$???M?^pq%B???q,?x?
9??*?.??E????epIW?v??5??=?w????v?????????6
??????.niX?~???????Fui??Y??????Ga??|?????
?*?m??
?????{??M\;"_???Ia??&?e?X?i?xo???
> ??8?u?tO_??e]O?M Xn????g????e??+?yUl?2V????t3???`)?X??A(,S??"???????xI???M%3C???Z??*_T2?B???b?Z-8h?Y%???,M?"A@c??ac?0?5?C?</???$???`M? ?M?????f??)I?!??DZk?lIz??g???MJ??
???,???h?A?H??n(g?
?}4s`??\<c?????||?=??m?????|?1{????????t????[6?	????p?\?7h????T??????t;????Z#?:(2?W
> ????Fz???+?*F???F???v#???4?n?;??,?????i????)?i??'\??
g???*?f
> &H??O?I?f??YS?0+?~???
> 
????E?xn???^??N<?Y???:??wf]1????-???.[?i?
m?G????j???`f??o????
=!O@??'??&?Z?????k??????<??J{????? ??????????Y???????k?????^8?!&_????N|LOSi^%?4Q0?<b?|\1?kA.2???R@???n|?,???^?g6<??????z?4?}?????D9F?
H???e???n????*JT(l???4?1e2y?P?5?????7?pfl??2F?<Cg??J%????$%TX')??$?R??:?Y?'??uT:????f??????$?Y????_>0??????w?A????;?	
????V???+?;?FC???? ?,?Bc?'??o?$?jJ"8????bFX?gqhmp????4?z????x|;?@?K3?+,gbY??
> F&??!<?(?3
?(??,???h{SO'???N??u

> ?d??.v????kO>???n0???+??x-????	?h&????=???1?w?w<?O?2?4???{??RphV
o???Y3?
!$??z????{UG?I'?et????k??b?U?:.?~y?C?e????/7u??H?{a??_?????9??o????z?_/?)???h0????7????J??+??.??????10a?O?\_??{;~!??k"6????G??S?????
a?9?'?)Pqp
> ?AI?P????<??X

> P`?!?
Q??pJ?$6c?
???n)??X??????q????????T??y???;(???*?4?
> ?@?K?`???? ??Td??P? +?M???+????????<?N?$?n!9??;??RIb?&=?/?n???(????ts[??????z`?2l????P????
?S?g?]??????A???) N?_???QD???4E?2$?{<???????dS?O?Q???A?mw?
N(}??3??U3q??p???@?
????&?????
H?`^?h?c at d? ??8t???????m(??Cm??Z)?(??kBr??"W?1?o???f?n|??????m?Er`YK?A?^?Vo
Q_J3<X??W??	?PW???#F???s?y?????A?y???y????L$????z?>????[?????????uRK.V?????A\4?`p?i;e?7??1Q?_Q??KH?k?4yT??J?(?ZC?19?_?
IC*(D?????????h?n??
?>????1)?3??r????\V}?A?
id\?????L=?;bu???T2?k
:?77s??N?y/?t????)???????d????????????R5?+{?Z??DuT????????
y?9??k???7$??m
~u_?9R'9p?Uo^??`??4]???<U?w+y??U????P|?w????p??Ny?f1*fZ?z?R???<(???=
> ???0?
?%\??P9s??a>?2???v???$?3!xaN?c???
????
???\??????Z?&?.?Q
@?{???
??????^Ao???'?f? `?`?q??F?q
B???QlS<?xYiW^????y?????t?"b(??
y? ????EF??IY?L??+t$
Sp!??i??N?p???)?
????!

UW???	?06???wR8F6??)?BJZH?4?M?R8??????Yt{
> ???????-?-?u???6??????????=???S?i??[W?v?k??e??m????X?j1??8???????+Eyv??
????
m?)^??E??
??X?;?#??U??bk?????XC??*?N???f?c
??v?*?Zl??wF?n?j?u4????????kJ[W6N??+~uH$c??X
m? ??f???
pj~??Y!?Jf.???l??.3?
,v9@'??(???v??emh
j?g5C??j??B??Vt?x??S?v?I?w$3D??????rSX
?	?s?J??_??CnE??B}?L
?y
?H?]???????????N??F??
> ?v??ZQ??D?ZX??
'????^^A([.??)???UL^? ??%?-?
?????n???~??
??????0????~?????u?b???I^}@M^j?
)^??????Y?????$;?N??R>
> A???m?=m'0:!???<????(F#??8?7??????-CS?/?M?S?>?+?
??=???-W???s??s???
t9??Z???x??dO?38?rGm???^??7^???????????)t??-N?'?gc??????o??
??sS??d??d?nqtY?;-?K?eX??????k??V?ce?}?j?c?????????????3;?b?h??m??I????.?
?
?
|? ??	???w?R?sWH?
?
?v?m?(????U:??????
?Q:?
|?[???????["7+?a??P, O?2?|
A??"???l.0f?y?Y?3???\?????L??\?J??????
??l>??]??????????f?Uk0?????h?:
??#?B??V?0?q\?t?W)?t???f+?U~?0?G?kJF?????3Y??y?'?U??
??{u????cT?`?SP???Z;??d8.??{???xc|?6?$VW??L4?_T?h??K?rOf
?????d??	??|?j??F?FN*M6????
?????????
v??w{?d
> endstream
> endobj
> 
> 10 0 obj
> 6200
> endobj
> 
> 11 0 obj
> << /Type /FontDescriptor
>    /FontName /BAAAAA+GillSansMT-Bold
>    /Flags 4
>    /FontBBox [ -176 -229 1165 929 ]
>    /ItalicAngle 0
>    /Ascent 929
>    /Descent -230
>    /CapHeight 929
>    /StemV 80
>    /FontFile2 9 0 R
> >>
> endobj
> 
> 12 0 obj
> << /Length 383
>    /Filter /FlateDecode >>
> stream
> x?]?Mo?@??$??=???
M?EM<?#??
?%)Y???/?/????;3;??x?a{0u??w?????T??????R?Q??q

??.?;?W6E?:????.?4sj?z?:JyC???75?T?Q???f+??9??W?s)?v??4bz??N??JNc???{-Q
???j????|H??y?D\???l+?tE)?0gq????j????#???.?u<??

????Q??? ?+???"B??@???EX?
?m??<BV?X`?r??v?ao{v?G?>
?5}
??&???L>hG?'????v4}?=?>1?>1???IX`?ai??P???3}?u@??'?\0????????????Wk?
?cp????<??k;?M?_,???endstream
> endobj
> 
> 13 0 obj
> << /Type /Font
>    /Subtype /TrueType
>    /BaseFont /BAAAAA+GillSansMT-Bold
>    /FirstChar 0
>    /LastChar 34
>    /Widths [ 1000 719 405 270 541 551 448 277
>      770 676 884 551 270 551 801 530
>      583 426 604 500 583 958 270 509
>      500 594 583 520 333 583 270 509
>      583 551 583 ]
>    /FontDescriptor 11 0 R
>    /ToUnicode 12 0 R
> >>
> endobj
> 
> 14 0 obj
> << /F1 13 0 R
>    /F2 8 0 R
>    >>
> endobj
> 
> 15 0 obj
> <<
>    /Font 14 0 R
>    /ProcSet [ /PDF ]
> >>
> endobj
> 
> 16 0 obj
> << /Type /Page
>    /Parent 3 0 R
>    /Resources 15 0 R
>    /MediaBox [ 0 0 842 595 ]
>    /Contents 1 0 R
> >>
> endobj
> 
> 3 0 obj
> << /Type /Pages
>    /Resources 15 0 R
>    /MediaBox [ 0 0 595 842 ]
>    /Kids [ 16 0 R
>            ]
>    /Count 1
> >>
> endobj
> 
> 17 0 obj
> << /Type /Catalog
>    /Pages 3 0 R
> >>
> endobj
> 
> 18 0 obj
> << /Author <FEFF004A0065006E0073002000480061006D0069007300630068>
> /Creator <FEFF0044007200610077>
> /Producer <FEFF0053007400610072004F0066006600690063006500200037>
> /CreationDate (D:20060817201019+02'00')
> >>
> endobj
> 
> xref
> 0 19
> 0000000000 65535 f
> 0000000017 00000 n
> 0000001815 00000 n
> 0000017415 00000 n
> 0000001842 00000 n
> 0000008668 00000 n
> 0000008693 00000 n
> 0000008932 00000 n
> 0000009397 00000 n
> 0000009754 00000 n
> 0000016060 00000 n
> 0000016086 00000 n
> 0000016331 00000 n
> 0000016797 00000 n
> 0000017162 00000 n
> 0000017218 00000 n
> 0000017285 00000 n
> 0000017553 00000 n
> 0000017613 00000 n
> trailer
> << /Size 19
>    /Root 17 0 R
>    /Info 18 0 R
> >>
> startxref
> 17844
> %%EOF

> Database Tables
> ===============
> 
> New tables
> ----------
>     vtiger_orgunit
> 
> 	Description:
> 	    Defines a oranizational unit
> 
> 	Columns
> 	    orgunitid		serial NOT NULL
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    type		character varying(30)
> 	    name		character varying(60) NOT NULL
> 	    address		character varying(150)
> 	    city   		character varying(100)
> 	    state  		character varying(100)
> 	    country		character varying(100)
> 	    code   		character varying(30)
> 	    phone  		character varying(30)
> 	    fax    		character varying(30)
> 	    website		character varying(100)
> 
> 	Constraints:
> 	    vtiger_orgunit_pkey
> 		PRIMARY KEY (orgunitid)
> 
> 	    fk_1_vtiger_orgunit
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_orgunit_name_idx
> 		ON vtiger_orgunit
> 		USING btree (orgid, name)
> 
> 	    vtiger_orgunit_type_idx
> 		ON vtiger_orgunit
> 		USING btree (orgid, type)
> 
> 
>     vtiger_orgunittype
> 
> 	Description:
> 	    Defines the values to be entered into vtiger_orgunit.type
> 
> 	Columns:
> 	    orgunittypeid	serial NOT NULL
> 	    orgunittype		character varying(30)
> 	    sortorderid		integer DEFAULT 0 NOT NULL
> 	    presence		integer DEFAULT 1 NOT NULL
> 
> 	Constraints:
> 	    vtiger_orgunittype_pkey
> 		PRIMARY KEY (orgunittypeid)
> 	
> 	Indices:
> 	    vtiger_orgunittype_type_idx
> 		ON vtiger_orgunittype
> 		USING btree (type)
> 
> 
>     vtiger_user2org
> 
> 	Description:
> 	    Defines a list of organizations a user may work for
> 
> 	Columns:
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    userid		integer	NOT NULL DEFAULT 0
> 	    primary		boolean DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_user2org
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_user2org
> 		FOREIGN KEY (userid)
> 		REFERENCES vtiger_users(userid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_user2org_orgid_idx
> 		ON vtiger_user2org
> 		USING btree (orgid)
> 
> 	    vtiger_user2org_userid_idx
> 		ON vtiger_user2org
> 		USING btree (userid)
> 
> 
>     vtiger_user2orgunit
> 
> 	Description:
> 	    Defines a list of organizational units a user is
> 	    assigned to
> 
> 	Columns:
> 	    orgunitid		integer	NOT NULL DEFAULT 0
> 	    userid		integer	NOT NULL DEFAULT 0
> 	    primary		boolean DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_user2orgunit
> 		FOREIGN KEY (orgunitid)
> 		REFERENCES vtiger_orgunit(orgunitid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_user2orgunit
> 		FOREIGN KEY (userid)
> 		REFERENCES vtiger_users(userid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_user2orgunit_orgid_idx
> 		ON vtiger_user2orgunit
> 		USING btree (orgunitid)
> 
> 	    vtiger_user2orgunit_userid_idx
> 		ON vtiger_user2orgunit
> 		USING btree (userid)
> 
> 
>     vtiger_entity2org
> 
> 	Description:
> 	    Assignes entities to particular organizations
> 
> 	Columns:
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    crmid		integer	NOT NULL DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_entity2org
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_entity2org
> 		FOREIGN KEY (crmid)
> 		REFERENCES vtiger_crmentity(crmid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_entity2org_crmid_idx
> 		ON vtiger_entity2org
> 		USING btree (crmid)
> 
> 	    vtiger_entity2org_userid_idx
> 		ON vtiger_entity2org
> 		USING btree (userid)
> 
> 
> Changes
> -------
>     1.  vtiger_campaing should be a vtiger_crmentity
> 	-> Add the following constraint to the database
> 
> 	    fk_r_vtiger_campaign
> 		FOREIGN KEY (campaignid)
> 		REFERENCES vtiger_crmentity(crmid)
> 		ON DELETE CASCADE
> 
> 	-> Provide a migration script for already stored campaigns
> 	
> 
> PHP changes
> ===========
> Administrators Role
> -------------------
>     1.  Settings -> Company Details
> 	- ListView
> 	- Add
> 	- Delete
> 	- Change
> 
>     2.  Settings -> Users
> 	- User is a member of one or more companies
> 	  (implement like the group membership assignement)
> 	- Assign one main company to the user (out of the 
> 	  membership list).
> 
> CEO Role
> --------
>     1.  Settings -> Company Details
> 	- Change deatils only for the companies, the user has a 
> 	  CEO role for
> 
>     2.  Settings -> Company Unit
> 	- ListView
> 	- Add
> 	- Delete
> 	- Change
> 	
>     3.  Settings -> Users
> 	- User is a member of one or more organization units
> 	  (take care to provide only those units of organizations/
> 	   companies to which the user already is assigned).
> 	- Assign one main orgunit to the user (out of the 
> 	  membership list).
> 
> Standard user role
> ------------------
>     1.  login scheme
> 	After the login the authenticated user gets another 
> 	window which lets him select the organization/company
> 	he's going to act for in the new session.
> 
> 	Open item: Skip this second login step if there's only
> 	one organization assigned to that user?
> 
> 	My proposal:
> 	    For the time being: yes. 
> 	    This would be subject of further FCRs (like book-
> 	    keeping - booking date selection on login).
> 
> 	Open item: Display the organization selection somewhere
> 	during the entire session?
> 
> 	My proposal: yes, upper right corner with the user name
> 
>     2.  Assignment of entities to exactly one company/organization
> 	This affects:
> 	- Quotes
> 	- Sales orders
> 	- Invoices
> 	- Price Books
> 	The company assignement is taken from the selection, the
> 	user did during login.
> 
>     3.  Assignment of entities to more than one company/organization
> 	This affects
> 	- Leads
> 	- Accounts
> 	- Contacts
> 	- Potentials
> 	- Products
> 	- Campaigns
> 	To the modification/add forms another list entity is to
> 	be added. This list fills the crmentity2org table. Users
> 	may add/delete entries to/from this table.
> 
> 	Open item: May this table be empty?
> 
>     4.  Assignment of entities to orgunits
> 	This affects:
> 	- Quotes
> 	- Sales orders
> 	- Invoices
> 	- Price Books
> 	The company assignement is taken from the selection, the
> 	user did during login.
> 
>     5.  PDF generation
> 	Addresses to be takenout of the organization table according
> 	to the organization reference of the affected entity.
> 	Addresses may be overridden by orgunit references.
> 
> General
> -------
>     1.  The role assignments shown above results in permissions
> 	to be maintained.
> 
>     2.  Do we use the term 'company' as in the GUI or 'organization'
> 	as in the database? (No preferences from my side ... only
> 	that there should be a common understanding).
> 
>     3.  Should there be a more sophisticated relationship between
> 	entities and organizations (also orgunits)? May like
> 
> 	    If a product is assigned to company A and B:
> 	    May both companies change product details or should
> 	    there still be an ownership assigned to one of the
> 	    companies?
> 
> 	This could be done using flags in the entity2org table
> 	but would result in more sophisticated GUI operations.

> _______________________________________________
> Get started with creating presentations online - http://zohoshow.com?vt 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      




From jeri at vtiger.com  Wed Nov 15 07:24:21 2006
From: jeri at vtiger.com (Jeri John)
Date: Wed, 15 Nov 2006 17:54:21 +0530
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
Message-ID: <10eeb932d91.-1068791366129115790.2050524429825132071@@vtiger.com>

Dear James, 
 Thanks for your fix.We have integrated it and it is available in the SVN. 
 
Thanks & Regards, 
Jerry.




---- James Tillman&lt;jamestillman at sevatechnologies.com&gt; wrote ---- 

 ((If someone would fix the forums registration, I'll gladly start posting these issues on the forums if this is not the correct venue.&nbsp; Until then, I assume reporting in some way is better than not reporting at all.)) &nbsp; modules/Emails/Emails.php seems to be lacking some key class-level fields.&nbsp; Namely, these: &nbsp; var $rel_users_table = "vtiger_salesmanactivityrel";var $rel_contacts_table = "vtiger_cntactivityrel";var $rel_serel_table = "vtiger_seactivityrel"; It makes use of these fields in its code, as in the function set_emails_contact_invitee_relationship(), but they are not set anywhere in the class. &nbsp; This problem comes to light when you attempt to use the Outlook plugin to link emails to a vtiger contact.&nbsp; You get the typical "Invalid return value from vtigerCRM" error message. &nbsp; I inserted the lines mentioned above at line 38 in Emails.php and Outlook email linking started to work. &nbsp; Most of the Outlook interaction with vtiger in&nbsp;v502&nbsp;seems to be sadly broken out of the box. &nbsp; By the way, anyone thought of improving the Outlook plugin to do something other than stupidly report that vtiger returned an invalid response?&nbsp; Having to use Fiddler or some other HTTP inspection utility to just to find the PHP error message from vtiger is time-consuming. &nbsp; jpt _______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061115/5a0a92eb/attachment-0002.html 

From philip at vtiger.com  Thu Nov 16 10:30:25 2006
From: philip at vtiger.com (Philip)
Date: Thu, 16 Nov 2006 21:00:25 +0530
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
 and general column layout
In-Reply-To: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
References: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
Message-ID: <10ef163e45a.3319490668445686029.-7775633052489133351@@vtiger.com>


Hi Niel,

Thanks for your effort in resolving the UI issue we'll test your filesin out test bed and check-in into the 5.0.3 repo if everything is fine,else we'll get back to you if we face any issue.

Regards,
Philip



---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au> wrote ---- 

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061116/92aed265/attachment-0002.html 

From dgrant at accuratetechnologies.com  Thu Nov 16 10:41:34 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Thu, 16 Nov 2006 10:41:34 -0500
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
	and general column layout
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.com>

I actually "solved" this problem a different way:

 

I have now explicitly wordwrapped all multi-line textareas to 80 chars,
both with WRAP=HARD and with a counting/wrapping function on the backend
(AJAX doesn't seem to support WRAP=HARD)

 

This way, the text entered in the textarea and the text returned from
the database wrap the same - what you see is how it is stored.

 

It's a lot simpler, and it works with AJAX.

 

DG 

 

  _____  

From: Philip [mailto:philip at vtiger.com] 
Sent: Thursday, November 16, 2006 10:30 AM
To: vtigercrm-developers at lists.vtigercrm.com
Cc: vtigercrm-developers at lists.vtigercrm.com
Subject: Re: [Vtigercrm-developers] Files to fix word wrapping of long
items and general column layout

 


Hi Niel,

Thanks for your effort in resolving the UI issue we'll test your files
in out test bed and check-in into the 5.0.3 repo if everything is fine,
else we'll get back to you if we face any issue.

Regards,
Philip



---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au>
wrote ---- 

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems
do
not wrap correctly and resizing the browser window doesn't help. See
ticket my #2564 and others. I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well;
wrapping
correctly when the user chooses to alter the width of his or her browser
window. In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's
and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo". Both of these now have a width
setting
that you can play with. You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected
because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in
lots
of places such as Change Password and Data Migration. This means that
I've
ended up tweaking (and fixing some bugs in) lots of tables. Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views". A Detail View shows the details for one item,
e.g.
a Contact, a Quote etc. Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory
tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting. These
now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View)
such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of
course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of
a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***. I've only
giving
you a new style.css for Blue Lagoon (any other theme will look a mess
with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you
can!

4) Now resize your browser window and check that everything wraps
neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css. This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these
files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been
used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View. This is causing confusion. For example there are multiple
styles defining the same heading of different tables both using Detail
View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having
four
columns: Label, Data, Label, Data. The headings for many different types
of tables are substantially identical. Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell
level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align". The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout. Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored
with
the link information for the image. Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells. In the
past
they used to be required to ensure a cell would display properly. If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left
aligned),
e.g. <td>{$data}&nbsp;</td> NOT <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of
these
changes. I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful. I spent a reasonable time
reformatting. (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061116/84365744/attachment-0002.html 

From neil.temperley at exemail.com.au  Thu Nov 16 18:59:38 2006
From: neil.temperley at exemail.com.au (neil.temperley at exemail.com.au)
Date: Fri, 17 Nov 2006 10:59:38 +1100 (EST)
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
 and general column layout
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.co
	m>
References: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.com>
Message-ID: <4257.203.143.170.20.1163721578.squirrel@webmail.exetel.com.au>

Hi Dennis,

Basically what I did was reduce the number of hard wired overrides to the
default style to a minimum and I also eliminated nowraps.  A nowrap on one
cell will often affect a whole column.

Since a 4 column "Detail View" is a standard table layout, I was able to
move the column width info into style.css.  This gives a knowledgable user
nice control over the relative column widths of a "Detail View" by
tweaking column width settings.

But the biggest gain is that all columns resize correctly to the window
width of the user's browser.  This is really nice.  Any user can resize
the window to suit their preference and the columns self adjust and wrap
accordingly.

Since the browser does the wrapping work it works with AJAX (and
multibyte) without additional coding.

Finally I was able to maximise the space for Notes and Descriptions etc by
getting them to span the full row.


BTW, several months back I helped implement code to force a wrap of
Multi-select combo box lists in Smarty, but this (as you know) required a
matching JavaScript fix for AJAX as well.  I always felt this was a
kludge; a hardwired column width that ignores the users browser window
should be avoided if possible.  With the new files I removed the 'kludge'.

regards,
Neil

> I actually "solved" this problem a different way:
>
>
>
> I have now explicitly wordwrapped all multi-line textareas to 80 chars,
> both with WRAP=HARD and with a counting/wrapping function on the backend
> (AJAX doesn't seem to support WRAP=HARD)
>
>
>
> This way, the text entered in the textarea and the text returned from
> the database wrap the same - what you see is how it is stored.
>
>
>
> It's a lot simpler, and it works with AJAX.
>
>
>
> DG
>
>
>
>   _____
>
> From: Philip [mailto:philip at vtiger.com]
> Sent: Thursday, November 16, 2006 10:30 AM
> To: vtigercrm-developers at lists.vtigercrm.com
> Cc: vtigercrm-developers at lists.vtigercrm.com
> Subject: Re: [Vtigercrm-developers] Files to fix word wrapping of long
> items and general column layout
>
>
>
>
> Hi Niel,
>
> Thanks for your effort in resolving the UI issue we'll test your files
> in out test bed and check-in into the 5.0.3 repo if everything is fine,
> else we'll get back to you if we face any issue.
>
> Regards,
> Philip
>
>
>
> ---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au>
> wrote ----
>
> Dear vtiger developers,
>
> please find attached a gzipped tar file of changes I'm suggesting to the
> vtiger user interface to cope with the problem that long item problems
> do
> not wrap correctly and resizing the browser window doesn't help. See
> ticket my #2564 and others. I've made these corrections to SVN 9765.
>
> In particular my aim was to make all "Detail Views" format well;
> wrapping
> correctly when the user chooses to alter the width of his or her browser
> window. In particular I wanted to ensure that fields such as Comments,
> Notes, Description, Terms & Conditions, Mailing Street and Multi-select
> Combo Boxes worked correctly with long items regardless of window width.
> Also, I've ensured that these wide items (including Contact Image (i.e.
> Photo)) now span multiple columns to provide a neater layout.
>
> With these changes, the user has significant control over column width's
> and
> layout in Detail Views by altering the two classes in the style.css file
> ".dvtCellLabel" and ".dvtCellInfo". Both of these now have a width
> setting
> that you can play with. You can choose values that give you column
> proportions pretty similar to vtiger's existing proportions, or you can
> choose values that enable more data to be fitted to the screen.
>
> Unfortunately, to implement these changes many files were affected
> because
> these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in
> lots
> of places such as Change Password and Data Migration. This means that
> I've
> ended up tweaking (and fixing some bugs in) lots of tables. Where
> reasonable I've tried to replace the use of these with the more generic
> .cellLabel and .cellInfo.
>
> Some of the "tables" affected are as follows.
>
> 1) All "Detail Views". A Detail View shows the details for one item,
> e.g.
> a Contact, a Quote etc. Detail Views are found in Contacts, Leads,
> Potentials, Accounts, Notes, User and all the items under the Inventory
> tab,
> e.g. Quotes and Invoices.
>
> 2) The Advance Filter tables used in Custom View and Reporting. These
> now
> resize well and can accept long "OR" combinations of search strings.
>
> 3) Odd places (which in my mind do not really constitute a Detail View)
> such
> as Change Password, Convert Lead, Calendar and Data Migration.
>
> Files most affected are:
> DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of
> course.
>
>
> How to proceed.
>
> 1) Untar the archive files into your vtigercrm root directory on top of
> a
> SVN 9765 version.
>
> 2) Log-on to vtiger using the *** Blue Lagoon Theme ***. I've only
> giving
> you a new style.css for Blue Lagoon (any other theme will look a mess
> with
> no word wrapping)!!!!
>
> 3) Edit a Contact and create lots of long entries in every field you
> can!
>
> 4) Now resize your browser window and check that everything wraps
> neatly.
>
> 5) If you want to play with the layout: in themes, open
> bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
> For experts, you may want to copy bluelagoon/style-developer.css to
> bluelagoon/style.css. This will give you a fairly ugly colour scheme but
> will clearly show the places that have been affected by my changes.
>
> 6) Note I reformatted the indentation of portions of the code in these
> files
> where I thought indentation was poor or hard to follow.
>
>
> Some of the things that I have learnt through this process.
>
> 1) There are multiple style classes used in vtiger and some have been
> used
> inconsistently.
> One problem is that there is no clear definition of what constitutes a
> Detail View. This is causing confusion. For example there are multiple
> styles defining the same heading of different tables both using Detail
> View
> style classes, e.g. .detailedViewHeader and .dvInnerHeader.
>
> I'd like to suggest that we restrict Detail View tables to those having
> four
> columns: Label, Data, Label, Data. The headings for many different types
> of tables are substantially identical. Rather than create new style for
> every situation or table, it is probably best to minimise the number of
> styles and use generic names such as .headingLevel2 or .selectBox where
> possible.
>
> 2) Note that HTML statements such as <table class='small'> or <tr
> class='small'> don't seem to propagate the font style down to cell
> level.
> I'm not sure why not.
>
> 3) Note also that an HTML statement like:
> <td align="left" class="txtBox">
> may not do what you want since the class setting always takes precedence
> over the "align". The better choice is this
> <td style="text-align:left;" class="txtBox">
> which will always work.
>
> 4) One nowrap type item in a table cell can turn off wrapping for the
> **whole column** of data and ruin the layout. Avoid using nowrap!
>
> 5) I couldn't resize images since the HTML sizing seems to be stored
> with
> the link information for the image. Photos are too large by default.
>
> 6) I don't think &nbsp; codes are required in empty data cells. In the
> past
> they used to be required to ensure a cell would display properly. If you
> need to include one, put it **after** the data not in front so that the
> alignment of the data is not disturbed (assuming the data is left
> aligned),
> e.g. <td>{$data}&nbsp;</td> NOT <td>&nbsp;{$data}</td>.
>
>
> Please let me know if you find any formatting disasters as a result of
> these
> changes. I've tried this with Firefox 1.5 and IE 6.0.
>
> I tried hard to be neat and careful. I spent a reasonable time
> reformatting. (Yes, I spent way way too long on this :-))
>
> Best regards,
> Neil
>
> Neil Temperley
> Skype: neil.temperley
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com




From Dirk.Gorny at genion.de  Fri Nov 17 04:48:57 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Fri, 17 Nov 2006 10:48:57 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
Message-ID: <200611171048.58005.Dirk.Gorny@genion.de>

Am Montag, 6. November 2006 17:57 schrieb Dhr. R.R. Gerbrands:

> @Dirk, could you give us your idea's on more specific improvements,
> compared with openCRX?

For sure, at first it is supports high class DBMS like DB2, Oracle, and 
MS-SQL.
- openCRX is a completely i18n application with many supportet languages. 
English, German, Spanisch, Chinese, French, Polish , Portuguese, Russian, 
Swedish, Turkish, and Farsi are included.
- For integration it supports RMI, CORBA, JMS, JCA.
- You need only one deployment and one set of tables to manage a hundred of 
different mandators.
- there is the possibility to export and import complex objects with their 
substructure in XML.
-You can sync Offline/Mobile Client and Server.

These are only a few things. The most you can see at 
http://www.opencrx.org/tour-features.htm.

Depending on the architecture (J2EE, OMG/MDA) they work with a core team 
consists of 3 people.

Best regards,

Dirk


From naterajj at hotmail.com  Mon Nov 20 14:00:47 2006
From: naterajj at hotmail.com (Juan Natera)
Date: Mon, 20 Nov 2006 11:00:47 -0800
Subject: [Vtigercrm-developers] Adding another asigned user's field to the
	Lead's Module
Message-ID: <BAY116-F30A4A860B57C70A6348D96C2ED0@phx.gbl>

Hi,

I need to have 2 users assigned per Lead, I was looking for recomendations 
on how to do this, Adding a regular custom field with users from the 
settings page won't acomplish what we want, since we need the 
notifications/reports and such to affect both users.

Thanks in advance,

Juan Natera

_________________________________________________________________
Get the latest Windows Live Messenger 8.1 Beta version.?Join now. 
http://ideas.live.com



From joe at tsolucio.com  Mon Nov 20 14:25:28 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Mon, 20 Nov 2006 20:25:28 +0100
Subject: [Vtigercrm-developers] Is the list active?
Message-ID: <1164050728.2936.34.camel@joesunix.int>

Hi,

For some time now there is very little activity on this list. The last
4/5 emails I have sent haven't been answered, fixed or commented on.

The ones I would like to know about are:

-> vtiger popup calendar start day of the week
-> new vtiger_entityname table
-> Latest news section in vtigerforge isn't updating
-> DMS

Is there another place where we should ask these questions?

Regards, Joe
TSolucio



From neil.temperley at exemail.com.au  Mon Nov 20 17:27:02 2006
From: neil.temperley at exemail.com.au (Neil Temperley)
Date: Tue, 21 Nov 2006 09:27:02 +1100
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
	andgeneral column layout
In-Reply-To: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
Message-ID: <000001c70cf3$02f2eed0$6501a8c0@Nemrut>

Dear All,

This archive has some minor fixes to two files in the version I sent
previously.  Additional altered files fix a layout issue for "Edit" and
"Create" views... now the spacing/layout of the copy address radio buttons
is improved.  (As far as I can tell these files can be dropped on top of SVN
9848 and everything works OK.)

Regards,
Neil

-----Original Message-----
From: vtigercrm-developers-bounces at lists.vtigercrm.com
[mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf Of Neil
Temperley
Sent: Monday, 13 November 2006 21:27
To: vtigercrm-developers at lists.vtigercrm.com
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
andgeneral column layout

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox">
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this <td style="text-align:left;"
class="txtBox"> which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.14.3/530 - Release Date: 11/11/06
18:53
 
    
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtiger-Neil-20061121.tar.gz
Type: application/x-gzip
Size: 85673 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/e18da66b/attachment-0001.gz 

From g.un at freemail.hu  Mon Nov 20 18:14:30 2006
From: g.un at freemail.hu (mikozod hozza)
Date: Tue, 21 Nov 2006 00:14:30 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
Message-ID: <freemail.20061021001430.78055@fm13.freemail.hu>

Hello,

 I would need help why the example at
http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
does not work for me.
I have installed vTiger 5.2.0 on Linux box.
I put this query:
"insert into vtiger_field values( 4, '',
'event_time','vtiger_login_hist', 2, 5, 'event_time',
'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
vtiger_login_hist is my prop table., event_time is one of
its field.
Then I got some error when visiting a certain Contact:
"Fatal error: Call to a member function Move() on a
non-object in
/var/www/vtigercrm/include/database/PearDatabase.php "
This error comes from query_result function.
When I switched on debugging info it was seen that result
parameter received here was empty.
Actually I don't know what I made wrong.
The whole purpose of my experiment would be to have a
proprietary field on Contacts/More information.
I hope some one can help me here.

br,

Gabor

______________________________________________________________________
KGFB-2007 az Els? Online Alkuszt?l! K?sse n?lunk ?jra k?telez? biztos?t?s?t! 
Az ?sszes biztos?t? egy helyen, Online kedvezm?nyek, egyszer? ?gymenet.
http://www.netrisk.hu





From dan.means at teamsrs.com  Mon Nov 20 21:45:07 2006
From: dan.means at teamsrs.com (Dan Means)
Date: Mon, 20 Nov 2006 18:45:07 -0800
Subject: [Vtigercrm-developers] Is the list active?
In-Reply-To: <1164050728.2936.34.camel@joesunix.int>
References: <1164050728.2936.34.camel@joesunix.int>
Message-ID: <45626833.2030901@teamsrs.com>

I think everybody's just exhausted and busy...

Joe Bordes wrote:

>Hi,
>
>For some time now there is very little activity on this list. The last
>4/5 emails I have sent haven't been answered, fixed or commented on.
>
>The ones I would like to know about are:
>
>-> vtiger popup calendar start day of the week
>-> new vtiger_entityname table
>-> Latest news section in vtigerforge isn't updating
>-> DMS
>
>Is there another place where we should ask these questions?
>
>Regards, Joe
>TSolucio
>
>_______________________________________________
>Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
>  
>

-- 
Dan Means
Mission Viejo, CA
www.dkmeansonline.com
www.teamsrs.com



From joe at tsolucio.com  Tue Nov 21 04:08:59 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 10:08:59 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021001430.78055@fm13.freemail.hu>
References: <freemail.20061021001430.78055@fm13.freemail.hu>
Message-ID: <1164100139.10220.3.camel@joesunix.int>

The second value of your insert is an empty string. It should be a
numeric value obtained from the function getUniqueID("vtiger_field").


El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> Hello,
> 
>  I would need help why the example at
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> does not work for me.
> I have installed vTiger 5.2.0 on Linux box.
> I put this query:
> "insert into vtiger_field values( 4, '',
> 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> vtiger_login_hist is my prop table., event_time is one of
> its field.
> Then I got some error when visiting a certain Contact:
> "Fatal error: Call to a member function Move() on a
> non-object in
> /var/www/vtigercrm/include/database/PearDatabase.php "
> This error comes from query_result function.
> When I switched on debugging info it was seen that result
> parameter received here was empty.
> Actually I don't know what I made wrong.
> The whole purpose of my experiment would be to have a
> proprietary field on Contacts/More information.
> I hope some one can help me here.
> 
> br,
> 
> Gabor
> 
> ______________________________________________________________________
> KGFB-2007 az Els? Online Alkuszt?l! K?sse n?lunk ?jra k?telez? biztos?t?s?t! 
> Az ?sszes biztos?t? egy helyen, Online kedvezm?nyek, egyszer? ?gymenet.
> http://www.netrisk.hu
> 
> 
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 



From joe at tsolucio.com  Tue Nov 21 04:10:14 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 10:10:14 +0100
Subject: [Vtigercrm-developers] Is the list active?
In-Reply-To: <45626833.2030901@teamsrs.com>
References: <1164050728.2936.34.camel@joesunix.int>
	<45626833.2030901@teamsrs.com>
Message-ID: <1164100214.10220.4.camel@joesunix.int>

Ok, that's normal. At least I know I am on the right list :-)

Thanks, Joe
El lun, 20-11-2006 a las 18:45 -0800, Dan Means escribi?:
> I think everybody's just exhausted and busy...
> 
> Joe Bordes wrote:
> 
> >Hi,
> >
> >For some time now there is very little activity on this list. The last
> >4/5 emails I have sent haven't been answered, fixed or commented on.
> >
> >The ones I would like to know about are:
> >
> >-> vtiger popup calendar start day of the week
> >-> new vtiger_entityname table
> >-> Latest news section in vtigerforge isn't updating
> >-> DMS
> >
> >Is there another place where we should ask these questions?
> >
> >Regards, Joe
> >TSolucio
> >
> >_______________________________________________
> >Reach hundreds of potential candidates - http://jobs.vtiger.com 
> >
> >  
> >
> 



From alex.svetos at gmail.com  Tue Nov 21 04:41:56 2006
From: alex.svetos at gmail.com (alex svetos)
Date: Tue, 21 Nov 2006 10:41:56 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021001430.78055@fm13.freemail.hu>
References: <freemail.20061021001430.78055@fm13.freemail.hu>
Message-ID: <26debbf70611210141u4d62a48fw1a3c5f9ac3e75e68@mail.gmail.com>

> Hello,
>
> I would need help why the example at
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> does not work for me.
> I have installed vTiger 5.2.0 on Linux box.
> I put this query:
> "insert into vtiger_field values( 4, '',
> 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> vtiger_login_hist is my prop table., event_time is one of
> its field.
> Then I got some error when visiting a certain Contact:
> "Fatal error: Call to a member function Move() on a
> non-object in
> /var/www/vtigercrm/include/database/PearDatabase.php "
> This error comes from query_result function.
> When I switched on debugging info it was seen that result
> parameter received here was empty.
> Actually I don't know what I made wrong.
> The whole purpose of my experiment would be to have a
> proprietary field on Contacts/More information.
> I hope some one can help me here.
>
> br,
>
> Gabor


Hi,

I don't understand what you want to do. But if you want to add a new field
in a Contact you should do something like this :
if you want to add a new field on Contact, assuming your field ids called
'card_number' you should insert a new line in vtiger field with thoses
values :

insert into a vtiger_contact values (4, an_unused_field_id, 'card_number',
'card_number',
'vtiger_contactdetails',1,7,'card_number','card_number',1,0,0,15,0,4,1,'I~O',1,NULL,'ADV'
)

And add a the new column in vtiger_contactdetails.

(assuming your new field is called 'mobile_phone' and is used to store a
phone number.)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/a5221807/attachment-0002.html 

From sergiokessler at gmail.com  Tue Nov 21 07:54:56 2006
From: sergiokessler at gmail.com (Sergio A. Kessler)
Date: Tue, 21 Nov 2006 09:54:56 -0300
Subject: [Vtigercrm-developers] separation in calendar
Message-ID: <49216030611210454q7739413cs7bccead9f47e0098@mail.gmail.com>

in the calendar screen there is a visual separation between events of types:

Call & Meetings (left tab)
To Dos (right tab)

but the button "Add" permit to add any type of event (Call, Meeting or
ToDo event)...

why there is two tabs ?

would'n it be better if the daily, weekly views show the three events
types without any tabs ??


salute,
/sergio


From g.un at freemail.hu  Tue Nov 21 09:19:02 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 15:19:02 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164100139.10220.3.camel@joesunix.int>
Message-ID: <freemail.20061021151902.54391@fm10.freemail.hu>

hi

> The second value of your insert is an empty string. It
should be a
> numeric value obtained from the function
getUniqueID("vtiger_field").
Actually it is enough if you issue this query in mysql. I
have used this query in mysql and it always assigns a unique
value there.

> 

> 
> El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> > Hello,
> > 
> >  I would need help why the example at
> >
http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> > does not work for me.
> > I have installed vTiger 5.2.0 on Linux box.
> > I put this query:
> > "insert into vtiger_field values( 4, '',
> > 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> > 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> > vtiger_login_hist is my prop table., event_time is one of
> > its field.


___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From g.un at freemail.hu  Tue Nov 21 09:25:58 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 15:25:58 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <26debbf70611210141u4d62a48fw1a3c5f9ac3e75e68@mail.gmail.com>
Message-ID: <freemail.20061021152558.6346@fm10.freemail.hu>



alex svetos <alex.svetos at gmail.com> ?rta:

> I don't understand what you want to do. But if you want to
add a new field

Actually I have defined a new table in vtiger database
(vtiger_login_hist). I wan to make the certain contact's
last login time to be displayed on Contacts/More Information
tab.
Technically I don't know for 100% sure how this should be
achieved. This is why I bother you here on this list:)
I have made some attempt based on online documentation on
vtiger page but those were failed. And I don't know where to
start to looking for my fault.  

> in a Contact you should do something like this :
> if you want to add a new field on Contact, assuming your
field ids called
> 'card_number' you should insert a new line in vtiger field
with thoses
> values :
> 
> insert into a vtiger_contact values (4,
an_unused_field_id, 'card_number',
> 'card_number',
>
'vtiger_contactdetails',1,7,'card_number','card_number',1,0,0,15,0,4,1,'I~O',1,NULL,'ADV'
> )
> 
> And add a the new column in vtiger_contactdetails.
> 
> (assuming your new field is called 'mobile_phone' and is
used to store a
> phone number.)
> 
Did I get it right that I have to update three tables in
database for this case? These table are: vtiger_field,
vtiger_contact and vtiger_contactdetails, aren't they?

thanks for help so far!

Gabor

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From joe at tsolucio.com  Tue Nov 21 09:56:24 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 15:56:24 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021151902.54391@fm10.freemail.hu>
References: <freemail.20061021151902.54391@fm10.freemail.hu>
Message-ID: <1164120984.10220.52.camel@joesunix.int>

HI,

El mar, 21-11-2006 a las 15:19 +0100, gabor escribi?:
> hi
> 
> > The second value of your insert is an empty string. It
> should be a
> > numeric value obtained from the function
> getUniqueID("vtiger_field").
> Actually it is enough if you issue this query in mysql. I
> have used this query in mysql and it always assigns a unique
> value there.

Yes, this is because the field is defined as an auto-increment. The
problem is that this procedure does NOT update the value in
vtiger_field_seq so any new module or maybe some patches are going to
get into trouble with overwritten field values. It's OK if your sure you
are never going to add anything somebody else has done.

The correct way to do this is launch the SQL insert and then modify the
value in vtiger_field_seq accordingly.

Joe
TSolucio
> 
> > 
> 
> > 
> > El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> > > Hello,
> > > 
> > >  I would need help why the example at
> > >
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> > > does not work for me.
> > > I have installed vTiger 5.2.0 on Linux box.
> > > I put this query:
> > > "insert into vtiger_field values( 4, '',
> > > 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> > > 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> > > vtiger_login_hist is my prop table., event_time is one of
> > > its field.
> 
> 
> ___________________________________________________________
> A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
> http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm
> 
> 
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 



From oded at atelis.net  Tue Nov 21 10:24:22 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 17:24:22 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <1164122662.13078.56.camel@x-23.atelis.net>


Hi all.

I'm evaluating vTiger CRM for my company, and there are several issues
where either I don't understand how to do things using vTiger CRM or
vTiger CRM is missing important functionality (important to my company ,
anyway ;-).

If its ok, I'd like to raise these issues here - not all at once, of
course - and get some feedback, and possibly solutions to these.

I'll start with the first question then:
We've developed an in-house inventory management application to manager
our sales of hardware products - we are resellers for a company that
manufactures extension cards for PCs. Each such card has a name, model
number and a serial number, where the serial number in unique for each
item - not product.

In our own inventory application, there is a "product" entity which has
a model number, and each product has several serial number assigned to
it. Due to commercial issues with out supplier (tracking eligability of
customers for support) , we need to track each item that is shipped,
using the serial number. Whenever we receive a delivery, we go over the
boxed and add the serial number of every item under the product entity
for that type of product. When we sell a product, we remove the item
serial number from the inventory.

We are not trying to use vTiger CRM to track inventory instead, but
apparently in vTiger CRM, the product entity carries the serial number,
so each product can have only one serial number available in the
inventory. This forces us to either register each boxed item we receive
as a product or ignore the serial numbers. We can't do the latter, and
the former is problematic due to several reasons:
- Creating a product entry is complicated and time consuming - creating
500 product entries for a shipment of 500 boards takes considerably more
time then recording 500 serial numbers somewhere.
- Product views (such as "Search for product" in the invoice editor)
rarely list the serial number, so you basically get a list containing
several dozens (sometimes hundreds, depending on the item) of similar
entries and one has to guess which carries the correct serial number.
- Inventory reports listing item quantity become completely useless.

Is there a way to do what we need that I wasn't aware of ?

Thanks.

--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
Nobody takes a bribe.  Of course at Christmas if you happen to hold out
your hat and somebody happens to put a little something in it, well,
that's different.
    -- New York City Police Commissioner (Ret.) William P. O'Brien,
instructions to the force.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/062e9236/attachment-0002.html 

From dgrant at accuratetechnologies.com  Tue Nov 21 10:37:31 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 21 Nov 2006 10:37:31 -0500
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>

 

 

  _____  

From: Oded Arbel [mailto:oded at atelis.net] 
Sent: Tuesday, November 21, 2006 10:24 AM
To: vtigercrm-developers at lists.vtigercrm.com
Subject: [Vtigercrm-developers] Question about the inventory mechanism

 


Hi all.

I'm evaluating vTiger CRM for my company, and there are several issues
where either I don't understand how to do things using vTiger CRM or
vTiger CRM is missing important functionality (important to my company ,
anyway ;-).

We wrote a back-end process to update the CRM with information out of
our inventory system, including stock info, etc.

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/d414d269/attachment-0002.html 

From oded at atelis.net  Tue Nov 21 10:52:42 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 17:52:42 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
Message-ID: <1164124362.13078.61.camel@x-23.atelis.net>

On Tue, 2006-11-21 at 10:37 -0500, Dennis Grant wrote:
> 
> We wrote a back-end process to update the CRM with information out of
> our inventory system, including stock info, etc.


But how did you solve the serial number issue with the CRM inventory
mechanism ? 
I can probably sync our local inventory system to vTiger CRM, but if the
vTiger CRM inventory reports will not be useful, and its not easy to use
the inventory information in other entities (such as sales and
invoices), then its kind of useless to me - we can just as easily
continue to use our inventory system w/o integration and scribble serial
numbers by hand on the invoices.

--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
You know what I did before I married?
Anything I wanted to.
    -- Henny Youngman

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/d95f406f/attachment-0002.html 

From dgrant at accuratetechnologies.com  Tue Nov 21 11:01:17 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 21 Nov 2006 11:01:17 -0500
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>

 

 


But how did you solve the serial number issue with the CRM inventory
mechanism ? 

 

We didn't - no need, as we don't track serial numbers like you do.

 

But the concept of coding back-end connectors to do your data entry is
valid.

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/5e68f763/attachment-0002.html 

From oded at atelis.net  Tue Nov 21 11:24:45 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 18:24:45 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>
Message-ID: <1164126285.13078.65.camel@x-23.atelis.net>

On Tue, 2006-11-21 at 11:01 -0500, Dennis Grant wrote:
>  
> 
>  
> 
> 
> But how did you solve the serial number issue with the CRM inventory
> mechanism ? 
> 
>  
> 
> We didn?t ? no need, as we don?t track serial numbers like you do.
> 
>  
> 
> But the concept of coding back-end connectors to do your data entry is
> valid.


It is, and I will do that if I can figure out a way to map the entities
I need to what the CRM provides.


--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
In an essay about programming, Ellen Ullman tells a great anecdote about
a programmer who was so socially inept that they could only communicate
with him via email, even they all shared the same office. She also
writes: "Pretty graphical interfaces are commonly called user-friendly.
But they are not really your friends. Underlying every user-friendly
interface is terrific contempt for the humans who will use it. ...to
build a crash-proof system, the designer must be able to imagine--and
disallow--the dumbest action possible. He or she has to think of every
single stupid thing a human being could do. Gradually, over months and
years, the designer's mind creates a construct of the user as an
imbecile. This image is necessary. No crash-proof system can be built
unless it is made for an idiot." 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/a90fbeab/attachment-0002.html 

From dan.means at teamsrs.com  Tue Nov 21 11:26:57 2006
From: dan.means at teamsrs.com (Dan Means)
Date: Tue, 21 Nov 2006 08:26:57 -0800
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <1164124362.13078.61.camel@x-23.atelis.net>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
	<1164124362.13078.61.camel@x-23.atelis.net>
Message-ID: <456328D1.9070002@teamsrs.com>

An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/2d9213c2/attachment-0002.html 

From g.un at freemail.hu  Tue Nov 21 15:15:43 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 21:15:43 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164120984.10220.52.camel@joesunix.int>
Message-ID: <freemail.20061021211543.19078@fm08.freemail.hu>


> > Actually it is enough if you issue this query in mysql. I
> > have used this query in mysql and it always assigns a unique
> > value there.
> 
> Yes, this is because the field is defined as an
auto-increment. The
> problem is that this procedure does NOT update the value in
> vtiger_field_seq so any new module or maybe some patches
are going to
> get into trouble with overwritten field values. It's OK if
your sure you
> are never going to add anything somebody else has done.
> 
> The correct way to do this is launch the SQL insert and
then modify the
> value in vtiger_field_seq accordingly.
So, for what purpose this vtiger_field table is there? I
have a custom field in contacts (besides my problem
described earlier) and this vtiger_field table is really empty

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From g.un at freemail.hu  Tue Nov 21 15:15:43 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 21:15:43 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164120984.10220.52.camel@joesunix.int>
Message-ID: <freemail.20061021211543.19078@fm08.freemail.hu>


> > Actually it is enough if you issue this query in mysql. I
> > have used this query in mysql and it always assigns a unique
> > value there.
> 
> Yes, this is because the field is defined as an
auto-increment. The
> problem is that this procedure does NOT update the value in
> vtiger_field_seq so any new module or maybe some patches
are going to
> get into trouble with overwritten field values. It's OK if
your sure you
> are never going to add anything somebody else has done.
> 
> The correct way to do this is launch the SQL insert and
then modify the
> value in vtiger_field_seq accordingly.
So, for what purpose this vtiger_field table is there? I
have a custom field in contacts (besides my problem
described earlier) and this vtiger_field table is really empty

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From philip at vtiger.com  Fri Nov 24 03:04:46 2006
From: philip at vtiger.com (Philip)
Date: Fri, 24 Nov 2006 13:34:46 +0530
Subject: [Vtigercrm-developers] Status update on vtiger CRM 5.0.3
Message-ID: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>

Team,

Iam very happy to inform you all we have crossed half way mark inversion 5.0.3 development.  As of today we have fixed about 60+issues and updated the bleeding-edge demo @ 

http://en.vtiger.com/wip/index.php

Trac status:

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/query?status=closed&group=owner&milestone=5.0.3&order=priority.


Based on the community feedback on quality of the product we areplanning to update the trac status on daily basis so that we canindentify any issues well in advance and avoid last minute glitches.This will also help us making the release hassle free.

We are looking forward for your help in validating the clossed issues.If there are any breakages kindly drop a mail to philip at vtiger.com sothat i can update the ticket status in trac. 

Regards,
Philip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061124/8c8a53f2/attachment-0002.html 

From jens at Strawberry.COM  Fri Nov 24 03:38:55 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Fri, 24 Nov 2006 09:38:55 +0100
Subject: [Vtigercrm-developers] Status update on vtiger CRM 5.0.3
In-Reply-To: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>;
	from Philip on Fri, Nov 24, 2006 at 01:34:46PM +0530
References: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>
Message-ID: <20061124093855.B779@Strawberry.COM>


Hi,


PostgreSQL support is still not complete in vtigercrm release 5.0.2.
I've already sent an patch to you when 5.0 was released, but you
said to incorporate this into 5.0.1 ...

In 5.1_jens the PostgreSQL support is fine. 5.1_jens is based on 5.0.2.
I may extract the PostgreSQL related diffs between 5.0.2 and 5.1_jens and
hand them over to you as a patch until sunday ...
Should I? 


Kind regards,
Jens
On Fri, Nov 24, 2006 at 01:34:46PM +0530, Philip wrote:
> Team,
> 
> Iam very happy to inform you all we have crossed half way mark inversion 5.0.3 development.  As of today we have fixed about 60+issues and updated the bleeding-edge demo @ 
> 
> http://en.vtiger.com/wip/index.php
> 
> Trac status:
> 
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/query?status=closed&group=owner&milestone=5.0.3&order=priority.
> 
> 
> Based on the community feedback on quality of the product we areplanning to update the trac status on daily basis so that we canindentify any issues well in advance and avoid last minute glitches.This will also help us making the release hassle free.
> 
> We are looking forward for your help in validating the clossed issues.If there are any breakages kindly drop a mail to philip at vtiger.com sothat i can update the ticket status in trac. 
> 
> Regards,
> Philip

> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      



From gregory.machin at gmail.com  Wed Nov 29 07:32:54 2006
From: gregory.machin at gmail.com (Gregory Machin)
Date: Wed, 29 Nov 2006 14:32:54 +0200
Subject: [Vtigercrm-developers] vtigercrm nubee
Message-ID: <30200a940611290432s3c146c22h2deecc7b74021ad3@mail.gmail.com>

Hi All.
I'm trying to install my, vtiger 5.0.2 from the tgz file..
and I get the following on the finish step ....

Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to
allocate 64 bytes) in
/var/www/html/vtigercrm/adodb/adodb-xmlschema.inc.php on line 1656

Im using Fedora Core 6 64_bit
AMD Turion 64 3Hz
1Gig Ram
apache 2.2.3
php 5.1.6

php.ini ...
<snip>
max_execution_time = 300     ; Maximum execution time of each script, in second
max_input_time = 60     ; Maximum amount of time each script may spend parsing
memory_limit = 512M      ; Maximum amount of memory a script may consume
</snip>

I started out memory_limit = 32M then 64M then 128M then got peeved
and set it to 512M
and still the same error..

I have played with all the setting I know and have used to resolve,
similar problems before ..
I'm stumped ...

please help

Many thanks


-- 
Gregory Machin
gregory.machin at gmail.com
www.linuxpro.co.za


From nithya at vtiger.com  Thu Nov  2 01:27:08 2006
From: nithya at vtiger.com (Nithya)
Date: Wed, 01 Nov 2006 22:27:08 -0800
Subject: [Vtigercrm-developers] Forum Moderation
Message-ID: <10ea7597a25.-7019041752458725766.5893219660014322383@@vtiger.com>

Hi Ken,

Thank you for your mail and valuable input.

We have been off late taking the operation of moving some of  our posts(issues) from forums to bugtrac as far as possible so that it is ticketed for developers' attention as soon as possible. Once we move it there, we lock these posts, so that the status of the issue can be seen in the trac itself. 

We have successfully completed moving all code contributions  and most of the other posts into HOw to's section of our WiKi Documentation  and locked it in forums.We are trying to maintain only general discussions in the main forums so that the forums are not flooded ,making our job simpler.

To lock a forum post, it can be done only by those with moderator priviliges.However, we will try and put a message as the last post , as you have rightly suggested.

And terribly sorry for the spam posts which you have had to cut off. We are trying desperately to do away with these unwarranted posts!

Please keep in touch with us.

Best Regards
Nithya

_______________________________________________________________________________________

Subject: 
[Vtigercrm-developers] Forum Moderation 
From: 
Ken Lyle <kenlyle at yahoo.com> 
Date: 
Mon, 30 Oct 2006 11:08:14 -0800 (PST) 
To: 
vTiger List <vtigercrm-developers at lists.vtigercrm.com> 

I've been moderating a bit, mainly deleting "girlie"
and "pharma" posts...I have seen a couple of minor
gripes about threads being locked.  I wonder whether
the board can be enhanced to show other moderators who
locked the thread, when and why?

Is it possible that threads can get locked by
accident?

Is this one locked, for example, because it's
superseded by another:
http://forums.vtiger.com/viewtopic.php?t=8932&postdays=0&postorder=asc&highlight=email&start=10

If so, it would be good to put a redirect message as
the last post before the thread is locked.

Just trying to get procedures down...

Thanks,
Ken

484-948-5706
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061101/c9ae9beb/attachment-0003.html 

From fp at crm-now.de  Fri Nov  3 05:32:15 2006
From: fp at crm-now.de (Frank Piepiorra)
Date: Fri, 3 Nov 2006 11:32:15 +0100
Subject: [Vtigercrm-developers] Bugtracker needs configuration
In-Reply-To: <mailman.642.1161957249.4976.vtigercrm-developers@lists.vtigercrm.com>
Message-ID: <200611031027.kA3ARZD8005280@doko.im-netz.de>

If you use the bugtracker to report bugs you can choose 4.2 or 5.0.0 but not
5.0.1 or 5.0.2 as the vtiger version. Please add the new version so that
bugs can be assigned to the proper version.

Regards,



From allan.bush+vtiger_dev at gmail.com  Fri Nov  3 11:29:58 2006
From: allan.bush+vtiger_dev at gmail.com (Allan Bush)
Date: Fri, 3 Nov 2006 08:29:58 -0800
Subject: [Vtigercrm-developers] Bugtracker needs configuration
In-Reply-To: <200611031027.kA3ARZD8005280@doko.im-netz.de>
References: <mailman.642.1161957249.4976.vtigercrm-developers@lists.vtigercrm.com>
	<200611031027.kA3ARZD8005280@doko.im-netz.de>
Message-ID: <3bec26390611030829t48726a12qe6f032776ab16bdd@mail.gmail.com>

Thanks for the heads up.

The version/milestone options should be up to date now.  I'd be temped
to remove 5.0.0 and 5.0.1 as version options when creating new tickets
(as the issue may have been fixed with 5.0.2) but I'll leave that up
to the people working on 5.x.

On 11/3/06, Frank Piepiorra <fp at crm-now.de> wrote:
> If you use the bugtracker to report bugs you can choose 4.2 or 5.0.0 but not
> 5.0.1 or 5.0.2 as the vtiger version. Please add the new version so that
> bugs can be assigned to the proper version.
>
> Regards,
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com
>


From joe at tsolucio.com  Fri Nov  3 12:31:15 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Fri, 03 Nov 2006 18:31:15 +0100
Subject: [Vtigercrm-developers] new vtiger_entityname table
Message-ID: <1162575075.11542.23.camel@joesunix.int>

Hi,

What is the new vtiger_entityname table for?
Do we have to add entries to this table for our own modules (timecards,
projects,...)?
Do we have to update the wiki with this info?

Thanks, Joe
TSolucio



From dimitar.peev at gmail.com  Sat Nov  4 05:37:23 2006
From: dimitar.peev at gmail.com (Dimitar Peev)
Date: Sat, 4 Nov 2006 12:37:23 +0200
Subject: [Vtigercrm-developers] no authentication on soap
Message-ID: <3b0e87e10611040237s34d73f8cxdb40a94ceace157a@mail.gmail.com>

I see that it is possible to flood every installation of vtiger with
leads and contacts through the soap RPC, am I right? There is no
password whatsoever.


From kenlyle at yahoo.com  Sun Nov  5 09:45:59 2006
From: kenlyle at yahoo.com (Ken Lyle)
Date: Sun, 5 Nov 2006 06:45:59 -0800 (PST)
Subject: [Vtigercrm-developers] MySQL Migration Tool
Message-ID: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>

I just discovered on my computer the MySQL Migration
Tool, 1.1.4 rc.

This looks like a framework for doing database
transforms, like vTiger 4.2.3 to 5, or Sugar 4.x to
4.2.3 or 5.

This might be a more supportable way to deliver the
data migrations we need.

Ken

484-948-5706
866-OUT OF BOX
(866-688-6326)

-- 
"He who reads nothing is more educated than he who reads nothing but newspapers."  - Thomas Jefferson


From Dirk.Gorny at genion.de  Sun Nov  5 10:04:25 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Sun, 5 Nov 2006 16:04:25 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
Message-ID: <200611051604.25302.Dirk.Gorny@genion.de>

Am Sonntag, 5. November 2006 15:45 schrieb Ken Lyle:
> I just discovered on my computer the MySQL Migration
> Tool, 1.1.4 rc.

Why another tool? The more code, the more errors. The basic thing is to put 
one database struktur to annother. Our ancestry therfor developed SQL. Long 
time ago with applications which where more complex in database structure all 
things were done in SQL. This prevents of running out of memory or on 
timeouts by the *.php or whatever you use. And, the great benefit; you will 
get meaningful error messages which are not dumped by the overlying script.
So my recommendation:
Pure SQJ, as few as possible Loops and complex strukture.
Not referencing by attribute order. Ever referencing by attribute.
I know it is a boring idea, but for me it worked the last 20 Jears.

Best regards,

Dirk


From remco at artoge.nl  Sun Nov  5 10:24:38 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Sun, 5 Nov 2006 16:24:38 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <200611051604.25302.Dirk.Gorny@genion.de>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
Message-ID: <4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>

Hi all,

Well I agree partly, as MYSQL isn't the only database in place! As  
their are some who work with postgrssql instead, not to mention the  
possibility for Oracle or anything else.
If it's a tool to be used by many other sql databases fine, but as  
far as I know it's not.

Refering to Dirk question why another tool, I've been developing with  
another tool: see www.radicore.org because I prefer a even stronger  
splitup: in using 3-tier design architecture.
Although until now it's only been for customisation of VtigerCRM, I  
would love to see the base of 3-tier which is allready within  
VtigerCRM taken a few steps futher.

Ton introduce it futher with a
[quote from radicore website:]
3-Tier Architecture

An architectural pattern of software development in which the  
application logic is separated into different tiers or layers:

The Presentation Layer or User Interface, which all handles all  
communication with the user.
The Business Layer, which has a separate object for each business  
entity.
The Data Access Layer which communicates with the database.
This allows individual layers to be enhanced, or even replaced, with  
minimal impact on the other layers. For example it should be possible  
to change nothing but the contents of the presentation layer in order  
to switch from XHTML output to PDF output, or to change nothing but  
the contents of the data access layer in order to switch from one  
database engine to another.

[end quote]

Best regards, Remco




Op 5-nov-2006, om 16:04 heeft Dirk Gorny het volgende geschreven:

> Am Sonntag, 5. November 2006 15:45 schrieb Ken Lyle:
>> I just discovered on my computer the MySQL Migration
>> Tool, 1.1.4 rc.
>
> Why another tool? The more code, the more errors. The basic thing  
> is to put
> one database struktur to annother. Our ancestry therfor developed  
> SQL. Long
> time ago with applications which where more complex in database  
> structure all
> things were done in SQL. This prevents of running out of memory or on
> timeouts by the *.php or whatever you use. And, the great benefit;  
> you will
> get meaningful error messages which are not dumped by the overlying  
> script.
> So my recommendation:
> Pure SQJ, as few as possible Loops and complex strukture.
> Not referencing by attribute order. Ever referencing by attribute.
> I know it is a boring idea, but for me it worked the last 20 Jears.
>
> Best regards,
>
> Dirk
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061105/4d7844fb/attachment-0003.html 

From acc at anthonychavez.org  Sun Nov  5 16:42:43 2006
From: acc at anthonychavez.org (Anthony Chavez)
Date: Sun, 05 Nov 2006 14:42:43 -0700
Subject: [Vtigercrm-developers] Customer portal sending wrong URL
Message-ID: <87mz75d0z0.fsf@hephaistos.aegaeum.anthonychavez.org>

vtigercrm-developers:

It would appear that version 5.0.0 of the Customer Portal (on FreeBSD
6.1-RELEASE-p3, Apache 2.2.3, and PHP 5.1.6) is not sending the
correct URL in emails.  Here is an example, which results in 404:

https://mydomain.com/vtiger/customerportal/general.php?action=UserTickets&ticketid=236&fun=detail

general.php does not exist anywhere in my vtiger tree.  Did I neglect
to install it, or has it been removed since version 4.x?

Thanks.

-- 
Anthony Chavez                                 http://anthonychavez.org/
mailto:acc at anthonychavez.org         jabber:acc at jabber.anthonychavez.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 480 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061105/b6da2111/attachment-0002.bin 

From Dirk.Gorny at genion.de  Mon Nov  6 02:22:15 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Mon, 6 Nov 2006 08:22:15 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
Message-ID: <200611060822.15947.Dirk.Gorny@genion.de>

Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:

> Refering to Dirk question why another tool, I've been developing with
> another tool: see www.radicore.org because I prefer a even stronger
> splitup: in using 3-tier design architecture.
> Although until now it's only been for customisation of VtigerCRM, I
> would love to see the base of 3-tier which is allready within
> VtigerCRM taken a few steps futher.

Hello Remco,

Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier architecture not 
the same thing than putting a new 300HP engine in an old Volkswagen Beetle?
There are better things to deal with a 3-tier architecture.
For exaple using a application server like Jboss and you get rid of much 
security issuees by having all those connectors and process encapsulation 
allready there.
I had worked a little with openCRX (http://www.opencrx.org/) wich has to my 
mind the best architecture (MDA) but must become user-friendly which 
vtigercrm is. In my opinion vtigercrm has to do a stronger encapsulating of 
the modules and building a crm-core as an interface for the Modules. But I am 
not shure if this is actually possible with php. At the end you have another 
application server.

Best regards,

Dirk


From remco at artoge.nl  Mon Nov  6 02:42:40 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 6 Nov 2006 08:42:40 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <200611060822.15947.Dirk.Gorny@genion.de>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
	<200611060822.15947.Dirk.Gorny@genion.de>
Message-ID: <07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>

Hi Dirk,


Well to use your metafor:
If you would use php 3 it would be: an old beetle with a new engine.
But as we're using php 5 it's the new beetle with a new engine.
Indeed it's possible but not easy to build, and I agree again partly:
As I'm using a hosted service for vtigercrm: it's only used for crm,  
in that way it's in my mind all ready an application server.
I will have to look into openCRX before I respond to the rest aswell.

Best regards and learning :-)

Remco



Op 6-nov-2006, om 8:22 heeft Dirk Gorny het volgende geschreven:

> Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:
>> Refering to Dirk question why another tool, I've been developing with
>> another tool: see www.radicore.org because I prefer a even stronger
>> splitup: in using 3-tier design architecture.
>> Although until now it's only been for customisation of VtigerCRM, I
>> would love to see the base of 3-tier which is allready within
>> VtigerCRM taken a few steps futher.
>
> Hello Remco,
>
> Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier  
> architecture not
> the same thing than putting a new 300HP engine in an old Volkswagen  
> Beetle?
> There are better things to deal with a 3-tier architecture.
> For exaple using a application server like Jboss and you get rid of  
> much
> security issuees by having all those connectors and process  
> encapsulation
> allready there.
> I had worked a little with openCRX (http://www.opencrx.org/) wich  
> has to my
> mind the best architecture (MDA) but must become user-friendly which
> vtigercrm is. In my opinion vtigercrm has to do a stronger  
> encapsulating of
> the modules and building a crm-core as an interface for the  
> Modules. But I am
> not shure if this is actually possible with php. At the end you  
> have another
> application server.
>
> Best regards,
>
> Dirk
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com



From lists.vtigercrm.com at callum-macdonald.com  Mon Nov  6 07:19:12 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Mon, 06 Nov 2006 19:19:12 +0700
Subject: [Vtigercrm-developers] Field cascade from Account to Contact
Message-ID: <454F2840.6030907@callum-macdonald.com>

Hey Guys,

Does anyone know if it's possible to have Account Type available as a 
field in a contact's record? So you could filter contacts according to 
Account Type, etc. If not, any suggestions on how we'd best achieve 
this? I can see a couple of options...

1) Create a custom field in Contacts and hack vtiger to automatically 
update the field every time an account field is changed. Potentially nasty.

2) Hack the sql to join the field in and add it to the result set. Again 
potentially nasty.

Suggestions most welcome on a postcard... :)

Cheers,


Callum.



From remco at artoge.nl  Mon Nov  6 11:57:02 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 6 Nov 2006 17:57:02 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
	<200611060822.15947.Dirk.Gorny@genion.de>
	<07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
Message-ID: <F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>

Well,

Reading a bit more:
http://www-128.ibm.com/developerworks/rational/library/may05/brown/ 
index.html

It makes sence: radicore.org is a usefull part for an MDA approche.  
Read for example, in the above url: Using MDA to customize a solution  
framework

And yes with a stronger encapsulating of the modules and building a  
crm-core as an interface for the Modules.
You can have another application server with php.

But I must state aswell that I do hope to see that's we'll still  
provide php only as wamp/lamp solution.
As said before, that's all I need :-)
If all this could help to improve the product let's then use it.


@Dirk, could you give us your idea's on more specific improvements,  
compared with openCRX?



Best regards,

Remco




Op 6-nov-2006, om 8:42 heeft Dhr. R.R. Gerbrands het volgende  
geschreven:

> Hi Dirk,
>
>
> Well to use your metafor:
> If you would use php 3 it would be: an old beetle with a new engine.
> But as we're using php 5 it's the new beetle with a new engine.
> Indeed it's possible but not easy to build, and I agree again partly:
> As I'm using a hosted service for vtigercrm: it's only used for crm,
> in that way it's in my mind all ready an application server.
> I will have to look into openCRX before I respond to the rest aswell.
>
> Best regards and learning :-)
>
> Remco
>
>
>
> Op 6-nov-2006, om 8:22 heeft Dirk Gorny het volgende geschreven:
>
>> Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:
>>> Refering to Dirk question why another tool, I've been developing  
>>> with
>>> another tool: see www.radicore.org because I prefer a even stronger
>>> splitup: in using 3-tier design architecture.
>>> Although until now it's only been for customisation of VtigerCRM, I
>>> would love to see the base of 3-tier which is allready within
>>> VtigerCRM taken a few steps futher.
>>
>> Hello Remco,
>>
>> Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier
>> architecture not
>> the same thing than putting a new 300HP engine in an old Volkswagen
>> Beetle?
>> There are better things to deal with a 3-tier architecture.
>> For exaple using a application server like Jboss and you get rid of
>> much
>> security issuees by having all those connectors and process
>> encapsulation
>> allready there.
>> I had worked a little with openCRX (http://www.opencrx.org/) wich
>> has to my
>> mind the best architecture (MDA) but must become user-friendly which
>> vtigercrm is. In my opinion vtigercrm has to do a stronger
>> encapsulating of
>> the modules and building a crm-core as an interface for the
>> Modules. But I am
>> not shure if this is actually possible with php. At the end you
>> have another
>> application server.
>>
>> Best regards,
>>
>> Dirk
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061106/d2e0f462/attachment-0003.html 

From joel.rydbeck at nubrek.com  Tue Nov  7 00:08:12 2006
From: joel.rydbeck at nubrek.com (Joel Rydbeck)
Date: Mon, 6 Nov 2006 23:08:12 -0600
Subject: [Vtigercrm-developers] 4.2 development
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com><200611051604.25302.Dirk.Gorny@genion.de><4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl><200611060822.15947.Dirk.Gorny@genion.de><07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
Message-ID: <64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>

Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
 
- Joel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 3212 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061106/2b038104/attachment-0004.bin 

From nolan at peaceworks.ca  Tue Nov  7 00:19:27 2006
From: nolan at peaceworks.ca (Nolan Andres)
Date: Tue, 07 Nov 2006 00:19:27 -0500
Subject: [Vtigercrm-developers] 4.2 development
In-Reply-To: <64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com><200611051604.25302.Dirk.Gorny@genion.de><4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl><200611060822.15947.Dirk.Gorny@genion.de><07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
	<64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>
Message-ID: <4550175F.30105@peaceworks.ca>

I'm interested, but can't be counted on for a lot of contributions. I'd 
be willing to take on issue 1507 (partial matches in searches), though, 
if that would be useful.

peace,
Nokes

Joel Rydbeck wrote:
> Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
>  
> - Joel
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


From grahama at add-ons.co.uk  Tue Nov  7 02:58:35 2006
From: grahama at add-ons.co.uk (grahama at add-ons.co.uk)
Date: Tue, 7 Nov 2006 07:58:35 +0000 (GMT)
Subject: [Vtigercrm-developers] 4.2 development
Message-ID: <865798.1162886315797.JavaMail.wibapp@vuk1120.visto-mgmt.com>

Joel

We are still on 4.x and because of the many custom requirements we have, we will remain for sometime.

We are also using mysql, would you say that a move to postgres would be beneficial ? What benefits have you seen?

Many thanks....any comments welcome.

Graham 

-----Original Message-----
From: "Joel Rydbeck" <joel.rydbeck at nubrek.com>
To: "vtigercrm-developers at lists.vtigercrm.com" <vtigercrm-developers at lists.vtigercrm.com>
Sent: 07/11/06 05:07
Subject: 4.2 development

Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
 
- Joel



From dgrant at accuratetechnologies.com  Tue Nov  7 12:02:45 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 7 Nov 2006 12:02:45 -0500
Subject: [Vtigercrm-developers] profileGlobalPermission
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4D88@exch.accuratetechnologies.com>

OK gang, I've been beating my head against this for a while and I'm
starting to get frustrated.

 

Here is the issue: 

 

1)         in the ListView for TroubleTickets, some users can see
TicketID and some cannot (the requirement is that all users can see
them)

 

2)         There is no place in the field permissions editor for Ticket
ID (or crmid, for that matter)

 

3)         Certain profiles CAN see TicketID; some cannot.

 

4)         The difference between those profiles that can see ticketID
is that they have $profileGlobalPermission[1] set to 0, where those that
cannot see TicketID have $profileGlobalPermission[1] set to 1;

 

5)         I think I've found where in the code the test is made - if
you have $is_admin true OR $profileGlobalPermission[1]==0, then you get
the full field list for that module/tab. Otherwise, there's a
complicated query that pulls down allowed fields.

 

6)         I have not (yet) found where $profileGlobalPermission[1] is
set

 

7)         I have not (yet) found how to add TicketID to a list of
permissions where $profileGlobalPermission[1] == 0;

 

I think being able to do #7 - and being to do it via the security
interface - is the ultimate goal here.

 

Can somebody PLEASE explain how this all interacts, before I go crazy?

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061107/980beb25/attachment-0003.html 

From joe at tsolucio.com  Tue Nov  7 15:59:04 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 07 Nov 2006 21:59:04 +0100
Subject: [Vtigercrm-developers]  profileGlobalPermissions
Message-ID: <1162933144.8036.11.camel@joeshome.int>

Hi Dennis,

I have seen that the $profileGlobalPermissions array is set in the users
corresponding user_privileges_id.php file (in the corresponding
directory). This file is created in the CreateUserPrivilegeFile function
in a script of the same name in modules/Users directory. I don't know
when the function is called but I suppose that it is when you create a
user.

This function calls getCombinedUserGlobalPermission and this one calls
getProfileGlobalPermission which accesses the table
vtiger_profile2globalpermissions where the profiles Global Access
Privileges are assigned.

So I think that those profiles that are working must have the Global
Privileges set to ALL and the others don't.

I suppose that if you change the values in the database, which is
equivalent to changing the profiles value you may get VT working in a
way that you don't want. I think you will have to look at another way of
adding the ticketid to the view. Probably playing with the SQL command.

What I did was create my own ticketid field which autoincrements with
code based on that available in the forums (I can send you my version if
you want) and I use this field instead of VT's ticketid.

Sorry I couldn't be of more help.

Regards, Joe
TSolucio



From dfar2008 at gmail.com  Tue Nov  7 23:27:26 2006
From: dfar2008 at gmail.com (ding jianting)
Date: Wed, 8 Nov 2006 12:27:26 +0800
Subject: [Vtigercrm-developers] dashboard bug
Message-ID: <fb148e2a0611072027v4c54a095q575306bf3c23bc89@mail.gmail.com>

Hi,all
I found error msg "No data available with the specified time period"  in
Dashboard module. I cracked code and found $this->module_id,module_name are
invoked by process_full_list_query function of CRMEntity Bean. But there are
no module_id,module_name fields in Potentails bean. Two fields exists in
5.0.1. So I added module_id,module_name field in Potentials.php.
Dashboard module works properly again.

another bug about report module:
AdvancedFilter.php getSecondaryColumns_AdvFilterHTML function:
from:
if(isset($mod_strings[$fieldlable]))
to:
if(isset($mod_strings[$fieldlabel]))

If any problem, pls let me know.

Thanks and regards

-- 
DingJianting
________________________________________
????????????: http://www.c3crm.com
-----------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061108/2bd6b40e/attachment-0003.html 

From lists.vtigercrm.com at callum-macdonald.com  Tue Nov  7 23:46:31 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Wed, 08 Nov 2006 11:46:31 +0700
Subject: [Vtigercrm-developers] Release naming
Message-ID: <45516127.4030306@callum-macdonald.com>

Hi Guys,

I think the naming of releases should be simplified. I suggest Joomla 
provides a good template to use (with one or two improvements):
http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11

vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
from what version you can apply patch 2, and so on. I suggest we use the 
same method as Joomla. When a new version is released (5.0.2) then the 
following files are released:
vtigercrm-5.0.0-to-5.0.2-patch.zip
vtigercrm-5.0.1-to-5.0.2-patch.zip
vtigercrm-5.0.2-full-windows.exe
vtigercrm-5.0.2-full-linux.bin
vtigercrm-5.0.2-full-lamp.tgz

<http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
think it's important to include the windows/linux/lamp in the file name. 
I know it's obvious from the extension to MOST people, but not to everyone.

I also think these files should all be released in the same package in 
sourceforge. In my opinion, splitting the full and patch releases is 
confusing.

I think this is a HUGELY important issue, as important as the recent 
heated debate over the naming of the GA release.

Comments on a postcard...


Callum.


From ncknight at pacific.net.sg  Wed Nov  8 00:41:07 2006
From: ncknight at pacific.net.sg (Nicholas Chan)
Date: Wed, 08 Nov 2006 13:41:07 +0800
Subject: [Vtigercrm-developers] Release naming
In-Reply-To: <45516127.4030306@callum-macdonald.com>
References: <45516127.4030306@callum-macdonald.com>
Message-ID: <45516DF3.20809@pacific.net.sg>

I just found it odd that the naming issue is still being discussed till
today. Why isn't the standard set and enforced already?

Callum Macdonald wrote:
> Hi Guys,
>
> I think the naming of releases should be simplified. I suggest Joomla 
> provides a good template to use (with one or two improvements):
> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11
>
> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
> from what version you can apply patch 2, and so on. I suggest we use the 
> same method as Joomla. When a new version is released (5.0.2) then the 
> following files are released:
> vtigercrm-5.0.0-to-5.0.2-patch.zip
> vtigercrm-5.0.1-to-5.0.2-patch.zip
> vtigercrm-5.0.2-full-windows.exe
> vtigercrm-5.0.2-full-linux.bin
> vtigercrm-5.0.2-full-lamp.tgz
>
> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
> think it's important to include the windows/linux/lamp in the file name. 
> I know it's obvious from the extension to MOST people, but not to everyone.
>
> I also think these files should all be released in the same package in 
> sourceforge. In my opinion, splitting the full and patch releases is 
> confusing.
>
> I think this is a HUGELY important issue, as important as the recent 
> heated debate over the naming of the GA release.
>
> Comments on a postcard...
>
>
> Callum.
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
>   



From jtk at yahoo.com  Wed Nov  8 01:38:26 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Wed, 08 Nov 2006 01:38:26 -0500
Subject: [Vtigercrm-developers] Release naming
References: <45516127.4030306@callum-macdonald.com>
Message-ID: <pan.2006.11.08.06.38.24.169176@yahoo.com>

Callum Macdonald wrote:
> I think the naming of releases should be simplified. vtiger 5 patch 2
> and vtiger 5.0.2 are confusing names. It is not clear from what version
> you can apply patch 2, and so on. I suggest we use the same method as
> Joomla. When a new version is released (5.0.2) then the following files
> are released:
>
> I also think these files should all be released in the same package in
> sourceforge. In my opinion, splitting the full and patch releases is
> confusing.

Just an opinion, but I don't think vtigercrm should concern itself with
(or release) anything except pure-source, verbatim-to-the-svn-tag tar.gz
and .zip releases.

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseNaming
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseProcedure

Binary installers, patch-overlay releases, these are all the things
that third-party packagers do according to their own standards. We don't
want those problems. Packagers have the expertise and the ultimate
responsibility to do final-installation correctly for their security
strategy. What they need from the vtigercrm team is a rock-solid tarball
with a predictable layout, at a predictable unique URL, happening the same
way with every major, minor and bugfix release.

vtigercrm releases should be tailored for a primary consumer audience of
system packagers, and a secondary audience of expert manual install
aficionados who are willing to obsessively merge the unpacked source tree
to their own customized installation, and additionally set file
permissions, etc, according to a well-documented INSTALL.txt.



From remco at artoge.nl  Wed Nov  8 06:30:17 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Wed, 8 Nov 2006 12:30:17 +0100
Subject: [Vtigercrm-developers] Release naming
In-Reply-To: <45516DF3.20809@pacific.net.sg>
References: <45516127.4030306@callum-macdonald.com>
	<45516DF3.20809@pacific.net.sg>
Message-ID: <B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>

@ Nicholas,

If you find it odd, you might want to wait using vtigercrm as we're  
in the process of becoming mature.

@ Callum,

What you are refering to is not release naming to my idea.
But package naming.
I think that's a bit confusing for more people,
The release naming is still the same, in you example 5.0.2,
depending on the target platform is you're suggested packet naming.

I can agree with it, yet as our user are no newbee's the naming as  
stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
ReleaseNaming
is enough, I would suggest adding a wiki page for the newbee's who  
doesn't know what to download instead.

Best regards,

Remco




Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:

> I just found it odd that the naming issue is still being discussed  
> till
> today. Why isn't the standard set and enforced already?
>
> Callum Macdonald wrote:
>> Hi Guys,
>>
>> I think the naming of releases should be simplified. I suggest Joomla
>> provides a good template to use (with one or two improvements):
>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/ 
>> frs.joomla_1_0.1_0_11
>>
>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not  
>> clear
>> from what version you can apply patch 2, and so on. I suggest we  
>> use the
>> same method as Joomla. When a new version is released (5.0.2) then  
>> the
>> following files are released:
>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>> vtigercrm-5.0.2-full-windows.exe
>> vtigercrm-5.0.2-full-linux.bin
>> vtigercrm-5.0.2-full-lamp.tgz
>>
>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0- 
>> patch2.zip?download>I
>> think it's important to include the windows/linux/lamp in the file  
>> name.
>> I know it's obvious from the extension to MOST people, but not to  
>> everyone.
>>
>> I also think these files should all be released in the same  
>> package in
>> sourceforge. In my opinion, splitting the full and patch releases is
>> confusing.
>>
>> I think this is a HUGELY important issue, as important as the recent
>> heated debate over the naming of the GA release.
>>
>> Comments on a postcard...
>>
>>
>> Callum.
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>
>>
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061108/b9c3bc42/attachment-0003.html 

From joe at tsolucio.com  Wed Nov  8 18:50:30 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Thu, 09 Nov 2006 00:50:30 +0100
Subject: [Vtigercrm-developers] vtiger popup calendar start day of the week
Message-ID: <1163029830.28710.8.camel@joeshome.int>

Hi,

I tried to get the VT calendar start on monday instead of sunday. I
found the code very hard to follow and, to my surprise, there was no
variable whose value I could change to get the calendar start on monday.
As I did for the javascript calendar changing the variable firstDay.

I finaly add a bit of code to the modules/Calendar/Calendar.php

I changed line 111
   $num_of_prev_days = $firstday_of_month->dayofweek;

to
   $num_of_prev_days = ($firstday_of_month->dayofweek==0 ? 6 :
$firstday_of_month->dayofweek-1);

And the same for year. I changed line 127
  $noof_prevdays = $firstday_of_month->dayofweek;

to
  $noof_prevdays = ($firstday_of_month->dayofweek==0 ? 6 :
$firstday_of_month->dayofweek-1);

This seems to be working fine but I really don't know what I am doing.
 Does this break other things?
 Will I start getting activities and notifications on the wrong dates?
 Is there really no global variable I can change to get the calendar
start on monday?

Any comments would be greatly appreciated.

Thanks, Joe
TSolucio




From leandro at oriontek.org  Wed Nov  8 22:12:01 2006
From: leandro at oriontek.org (Leandro Rache Sanchez)
Date: Wed, 8 Nov 2006 22:12:01 -0500
Subject: [Vtigercrm-developers] vtiger 5.0.0 to vtiger 5.0.2
Message-ID: <200611082212.01724.leandro@oriontek.org>

Hi developers,
I tried to install vtiger 5.0.2 from SVN and this ok, but i need to update 
vtiger 5.0.0 to vtiger 5.0.2, some simply copy paste from SVN soesn't work, 
please help me with some script for this update.

Thanks, 
-- 

   ~     Leandro Rache Sanchez
 (. .)   leandro at oriontek.org
  \V/      
 //"\\   Corporacion Tecnol?gica ORION.
/( ' )\  info at oriontek.org
 ^*-*^   http://www.oriontek.org/orion/
---------------------------------------




From gopals at vtiger.com  Thu Nov  9 08:32:58 2006
From: gopals at vtiger.com (Gopal)
Date: Thu, 09 Nov 2006 19:02:58 +0530
Subject: [Vtigercrm-developers] Announcement: Richie's Europe Trip Schedule..
Message-ID: <45532E0A.4050709@vtiger.com>

Dear Team,

I am pleased to inform you all that Richie's Europe trip has been 
finalized.

He will be reaching *UK* before 11th Nov and start visiting our user 
community and partners from 12th of Nov. In UK he will stay for about 10 
days time. Based on the community needs he will extend his stay for 3 to 
4 days.

Next, he will be going to *Germany* or *France* for around 20 days stay 
where he will visit our community & business partners in various cities. 
In *France* he will be attending an Open Source Competition as a Jury 
member (Nov 30th and 31st).

http://www.tropheesdulibre.org/index.php?module=4&action=3

His stay in France for 10 to 15 days period in depending up on the 
community requirements. He will also visit other *Schengen* countries 
depending on the community demand.

*/I would like to request you all to let us know your convenient place & 
time to meet Richie. In each country he would like meet most of our 
community members.

/*Please drop a mail directly to *richie at vtiger.com* (and CC to 
gopals at vtiger.com) with the following information:

    * Place
    * Convenient Time
    * Address & Phone No

Looking forward for your kind cooperation for making vtiger's first trip 
to Europe a successful one!

Best Regards,
*Gopal
vtiger Team*
---
S.S.G.Gopal
+1 925 965 6387
Skype: sripadag
blog: http://blogs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061109/69cf1fb5/attachment-0003.html 

From kenlyle at yahoo.com  Thu Nov  9 10:15:20 2006
From: kenlyle at yahoo.com (Ken Lyle)
Date: Thu, 9 Nov 2006 07:15:20 -0800 (PST)
Subject: [Vtigercrm-developers] Being Good Tool Users
Message-ID: <20061109151520.49889.qmail@web37312.mail.mud.yahoo.com>

Community Engagement and Bug Fix Case Study:

http://forums.vtiger.com/viewtopic.php?t=10811

I submitted a simple one file patch on October 31.
That fix is stuck in the middle of the forum thread at
the bottom of page 3.

**Can I make a post within a thread Starred, Featured,
Sticky?  That would seem like a good thing in this
case.

***Some people have reported that it works, some
people have other issues.  It appears that we have NO
STRUCTURED mechanism for capturing the fact that there
is a candidate fix, and what versions and operating
systems on which the fix was successful or
unsuccessful.

Furthermore, we don't seem to have a way of tracking
the 'credibility' of each report.  Ideally, we could
score these like so:

Senior Users: 90% fix rate
Intermediate Users: 60% fix rate
Noob Users: 50% fix rate

>From this example, I would assume that the fix is
good, for the versions where the Senior Users report a
fix rate over 80%, and the rest is user error.

Back to the story....Today, 10 days later (Is that
good? It gives time to get feedback, but wastes time
of people who have a hard time finding the
fix)...Nithya moved this to TRAC,
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/ticket/2578
, and posted a link to the 
thread above, but it's not obvious that you have to go
to page 3 to find the patch.  There's no way in the
forum to filter just posts with attachments....see **

SO, I posted the patch to the TRAC ticket.  But not
everyone has access to TRAC, I think.  FURTHER, when I
go to the TRAC page,
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report ,
not logged in (public), I can't SEARCH

How can I determine whether the bug that I am
considering posting has already been posted?  Even if
I click Active Tickets, 
there is No Search.  I don't believe that everyone
knows about Ctrl+F (Firefox).

IF we had ***, either in PHPBB or TRAC, then we could
confidently LOCK the forum thread with a single
redirect to the TRAC ticket.

SO, here is an idea...

SEARCH in the Forums seems broken...why, when I search
for "Incoming Email" is the thread above 6th, behind
less relevant threads?

Assuming that THAT can be fixed...perhaps, when there
is a candidate fix for a bug, there should be a POLL
created that runs for a certain period...after which,
if more than X% report success, the thread is locked,
and  
a Starred, Featured, Sticky redirect to the TRAC
ticket placed atop the thread.  This would save
everyone time...

I am a Moderator, where is the ability to create a
Poll?  I would like to try this concept...

Second, maybe TRAC is a better place to collect
Operating System and version information for each bug
and candidate fix.  Who can add these 
fields?

This would also provide us usage data, right?  I know
Sugar has that thing that collects usage data, which I
would guess includes O/S, # of records,
etc.  If we know what configurations people are using,
we can better isolate bugs...In fact, I can't really
imagine trying to do it without that info.

How can we even set priorities without knowing, for
example, "There are 10 users with Bug #XXXX, but they
are all running Red Hat 7".  Then we can issue
a statement that Red Hat 7 is not an officially
supported platform, but Good Luck anyway....

I think it's important to realize that if we can save
120 people 30 seconds every day, we can get an extra
hour that can be 
used to improve vTiger.

I offer a challenge to all of you.....to select tools
and use them in a way that accurately reflects the
talent and intelligence of this group, because, right
now, it does not, IMNSHO (In My Not So Humble
Opinion).  

AND, of course, the Core Team should avoid shipping
critical modules in a broken state.

I want to help this effort, but become disheartened
when it looks like nobody is thinking systematically,
and there is no documentation sufficient
to guide a reasonably bright person in how to
contribute...I'll contribute some of that next, partly
based on feedback to this thread.

I've put hours into composing this, and would like to
see something come of it...

Thanks,
Ken

484-948-5706
866-OUT OF BOX
(866-688-6326)

-- 
"He who reads nothing is more educated than he who reads nothing but newspapers."  - Thomas Jefferson


From jens at Strawberry.COM  Thu Nov  9 14:43:48 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Thu, 9 Nov 2006 20:43:48 +0100
Subject: [Vtigercrm-developers] Announcement: Richie's Europe Trip
	Schedule..
In-Reply-To: <45532E0A.4050709@vtiger.com>;
	from Gopal on Thu, Nov 09, 2006 at 07:02:58PM +0530
References: <45532E0A.4050709@vtiger.com>
Message-ID: <20061109204348.A13058@Strawberry.COM>

Hi,

End of November/Beginnig of December would be fine for me all the
time. My location is Munich/Germany. I'd may pick up Richie at the
munich airport and arrange a hotel room for him here in my town.


My address is

    Strawberry EDV Systeme GmbH
    Jens Hamisch - CEO
    Am Flosskanal 9a
    D-82515 Wolfratshausen
    Tel.: +49 8171 41805-0


You may contact me or our my colleque Mrs. Westermann to clarify the
details.


Jens




On Thu, Nov 09, 2006 at 07:02:58PM +0530, Gopal wrote:
> Dear Team,
> 
> I am pleased to inform you all that Richie's Europe trip has been 
> finalized.
> 
> He will be reaching *UK* before 11th Nov and start visiting our user 
> community and partners from 12th of Nov. In UK he will stay for about 10 
> days time. Based on the community needs he will extend his stay for 3 to 
> 4 days.
> 
> Next, he will be going to *Germany* or *France* for around 20 days stay 
> where he will visit our community & business partners in various cities. 
> In *France* he will be attending an Open Source Competition as a Jury 
> member (Nov 30th and 31st).
> 
> http://www.tropheesdulibre.org/index.php?module=4&action=3
> 
> His stay in France for 10 to 15 days period in depending up on the 
> community requirements. He will also visit other *Schengen* countries 
> depending on the community demand.
> 
> */I would like to request you all to let us know your convenient place & 
> time to meet Richie. In each country he would like meet most of our 
> community members.
> 
> /*Please drop a mail directly to *richie at vtiger.com* (and CC to 
> gopals at vtiger.com) with the following information:
> 
>     * Place
>     * Convenient Time
>     * Address & Phone No
> 
> Looking forward for your kind cooperation for making vtiger's first trip 
> to Europe a successful one!
> 
> Best Regards,
> *Gopal
> vtiger Team*
> ---
> S.S.G.Gopal
> +1 925 965 6387
> Skype: sripadag
> blog: http://blogs.vtiger.com

> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      



From natan.pereira at fator9.com  Fri Nov 10 12:26:28 2006
From: natan.pereira at fator9.com (natan.pereira at fator9.com)
Date: Fri, 10 Nov 2006 15:26:28 -0200
Subject: [Vtigercrm-developers] Adding a new field with radio button
Message-ID: <20061110152628.uw0gorykx0g088wk@webmail.fator9.com>

I am having some problems with a new field, what I want is:

Add two radios buttons (when I am registring a new Lead), that when  
one is selected  appers a especific field and when the other is  
selected appers other especific field.

I know how to do a field in database, but I dont know how to do the  
radio button and where I will put de progamming (if clause).

I will be glad with somebody could help me...



From neil.temperley at exemail.com.au  Mon Nov 13 05:27:24 2006
From: neil.temperley at exemail.com.au (Neil Temperley)
Date: Mon, 13 Nov 2006 21:27:24 +1100
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items and
	general column layout
In-Reply-To: <45532E0A.4050709@vtiger.com>
Message-ID: <000901c7070e$4fc70c90$6401a8c0@Nemrut>

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtiger-Neil.tar.gz
Type: application/x-gzip
Size: 88018 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061113/b242a0d8/attachment-0002.gz 

From lists.vtigercrm.com at callum-macdonald.com  Mon Nov 13 07:24:00 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Mon, 13 Nov 2006 19:24:00 +0700
Subject: [Vtigercrm-developers] Release naming (package naming)
In-Reply-To: <B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
References: <45516127.4030306@callum-macdonald.com>	<45516DF3.20809@pacific.net.sg>
	<B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
Message-ID: <455863E0.30509@callum-macdonald.com>

Remco, you're right, I'm confusing package naming with release naming.

The release naming documentation states "The vtigercrm project no longer 
produces Patches 
<http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/PatchSubmission> for 
distribution..." but there is a patch available here:
http://www.vtiger.com/index.php?option=com_content&task=view&id=30&Itemid=57

Who releases that patch? It's really the name of the patches that I 
think should be simplified, not the naming of the main releases.

Cheers - Callum.

Dhr. R.R. Gerbrands wrote:
> @ Nicholas,
>
> If you find it odd, you might want to wait using vtigercrm as we're in 
> the process of becoming mature. 
>
> @ Callum,
>
> What you are refering to is not release naming to my idea.
> But package naming.
> I think that's a bit confusing for more people,
> The release naming is still the same, in you example 5.0.2,
> depending on the target platform is you're suggested packet naming.
>
> I can agree with it, yet as our user are no newbee's the naming as 
> stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseNaming
> is enough, I would suggest adding a wiki page for the newbee's who 
> doesn't know what to download instead.
>
> Best regards,
>
> Remco
>
>
>
>
> Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:
>
>> I just found it odd that the naming issue is still being discussed till
>> today. Why isn't the standard set and enforced already?
>>
>> Callum Macdonald wrote:
>>> Hi Guys,
>>>
>>> I think the naming of releases should be simplified. I suggest Joomla 
>>> provides a good template to use (with one or two improvements):
>>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11
>>>
>>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
>>> from what version you can apply patch 2, and so on. I suggest we use 
>>> the 
>>> same method as Joomla. When a new version is released (5.0.2) then the 
>>> following files are released:
>>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>>> vtigercrm-5.0.2-full-windows.exe
>>> vtigercrm-5.0.2-full-linux.bin
>>> vtigercrm-5.0.2-full-lamp.tgz
>>>
>>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
>>> think it's important to include the windows/linux/lamp in the file 
>>> name. 
>>> I know it's obvious from the extension to MOST people, but not to 
>>> everyone.
>>>
>>> I also think these files should all be released in the same package in 
>>> sourceforge. In my opinion, splitting the full and patch releases is 
>>> confusing.
>>>
>>> I think this is a HUGELY important issue, as important as the recent 
>>> heated debate over the naming of the GA release.
>>>
>>> Comments on a postcard...
>>>
>>>
>>> Callum.
>>> _______________________________________________
>>> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>>>
>>>
>>
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
> Dhr. R.R. Gerbrands
>
> Artoge 
>
> ICT Security & Administration
> Jachthoornstraat 59
> 6219 BN  Maastricht
>
> kvk 14083961
> btw 155595106B01
>
> t:    +31 43 325 0316 
> m:  +31 6 2127 8082
> e:   remco at artoge.nl <mailto:remco at artoge.nl>
> i:    www.artoge.nl
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 



From remco at artoge.nl  Mon Nov 13 12:33:15 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 13 Nov 2006 18:33:15 +0100
Subject: [Vtigercrm-developers] Release naming (package naming)
In-Reply-To: <455863E0.30509@callum-macdonald.com>
References: <45516127.4030306@callum-macdonald.com>	<45516DF3.20809@pacific.net.sg>
	<B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
	<455863E0.30509@callum-macdonald.com>
Message-ID: <AFD411F9-259C-45D4-AE90-C46863E8ECFB@artoge.nl>

Hi Callum,

I see what you mean:

LAMP/WAMP download (6.1 MB/tar.gz)
v5.0 Patch 2  download  (0.65 MB/tar.gz)

I agree, that's not a propere release naming, reading blog: http:// 
www.vtiger.com/blogs/page/7/  that was handle by Philip and Mickie.
Looking at: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
ReleaseNaming and seeing tar.gz I think they should name this: "LAMP/ 
WAMP update from 5.0.1 to 5.0.2"

Cheers, Remco




Op 13-nov-2006, om 13:24 heeft Callum Macdonald het volgende geschreven:
> Remco, you're right, I'm confusing package naming with release naming.
>
> The release naming documentation states "The vtigercrm project no  
> longer
> produces Patches
> <http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/PatchSubmission> for
> distribution..." but there is a patch available here:
> http://www.vtiger.com/index.php? 
> option=com_content&task=view&id=30&Itemid=57
>
> Who releases that patch? It's really the name of the patches that I
> think should be simplified, not the naming of the main releases.
>
> Cheers - Callum.
>
> Dhr. R.R. Gerbrands wrote:
>> @ Nicholas,
>>
>> If you find it odd, you might want to wait using vtigercrm as  
>> we're in
>> the process of becoming mature.
>>
>> @ Callum,
>>
>> What you are refering to is not release naming to my idea.
>> But package naming.
>> I think that's a bit confusing for more people,
>> The release naming is still the same, in you example 5.0.2,
>> depending on the target platform is you're suggested packet naming.
>>
>> I can agree with it, yet as our user are no newbee's the naming as
>> stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
>> ReleaseNaming
>> is enough, I would suggest adding a wiki page for the newbee's who
>> doesn't know what to download instead.
>>
>> Best regards,
>>
>> Remco
>>
>>
>>
>>
>> Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:
>>
>>> I just found it odd that the naming issue is still being  
>>> discussed till
>>> today. Why isn't the standard set and enforced already?
>>>
>>> Callum Macdonald wrote:
>>>> Hi Guys,
>>>>
>>>> I think the naming of releases should be simplified. I suggest  
>>>> Joomla
>>>> provides a good template to use (with one or two improvements):
>>>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/ 
>>>> frs.joomla_1_0.1_0_11
>>>>
>>>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not  
>>>> clear
>>>> from what version you can apply patch 2, and so on. I suggest we  
>>>> use
>>>> the
>>>> same method as Joomla. When a new version is released (5.0.2)  
>>>> then the
>>>> following files are released:
>>>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>>>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>>>> vtigercrm-5.0.2-full-windows.exe
>>>> vtigercrm-5.0.2-full-linux.bin
>>>> vtigercrm-5.0.2-full-lamp.tgz
>>>>
>>>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0- 
>>>> patch2.zip?download>I
>>>> think it's important to include the windows/linux/lamp in the file
>>>> name.
>>>> I know it's obvious from the extension to MOST people, but not to
>>>> everyone.
>>>>
>>>> I also think these files should all be released in the same  
>>>> package in
>>>> sourceforge. In my opinion, splitting the full and patch  
>>>> releases is
>>>> confusing.
>>>>
>>>> I think this is a HUGELY important issue, as important as the  
>>>> recent
>>>> heated debate over the naming of the GA release.
>>>>
>>>> Comments on a postcard...
>>>>
>>>>
>>>> Callum.
>>>> _______________________________________________
>>>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>
>> Dhr. R.R. Gerbrands
>>
>> Artoge
>>
>> ICT Security & Administration
>> Jachthoornstraat 59
>> 6219 BN  Maastricht
>>
>> kvk 14083961
>> btw 155595106B01
>>
>> t:    +31 43 325 0316
>> m:  +31 6 2127 8082
>> e:   remco at artoge.nl <mailto:remco at artoge.nl>
>> i:    www.artoge.nl
>>
>>
>> --------------------------------------------------------------------- 
>> ---
>>
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061113/a73c5675/attachment-0003.html 

From jamestillman at sevatechnologies.com  Tue Nov 14 09:20:08 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 06:20:08 -0800
Subject: [Vtigercrm-developers] Bug in soap/vtigerolservice.php
Message-ID: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>

The vtiger forums are down, and there is no immediately obvious way to
log bugs for vtiger, so I'm resorting to subscribing to your mailing to
report a bug.
 
Using version 502.
 
On line 754 in soap/vtigerolservice.php, there is this code:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.$account_name."'";

Besides being an invite to a sql-injection attack, this also creates
problems for the Outlook plugin when a contact in Outlook has a company
name with an apostrophe in it, and that contact does not yet exist in
vtiger.  The contact John Smith, with Bob's Pool Hall in the company
name, for example, will create the very unhelpful "Invalid return value
from vtigerCRM" error message when you attempt to sync using the Outlook
plugin.
 
Modifying line 754 to read:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.addslashes($account_name)."'";

while not the best option for a fix, does cause the contact sync to
begin working even with apostrophes in the company name.
 
jpt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/e0d8863f/attachment-0003.html 

From jamestillman at sevatechnologies.com  Tue Nov 14 09:44:32 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 06:44:32 -0800
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
Message-ID: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>

((If someone would fix the forums registration, I'll gladly start
posting these issues on the forums if this is not the correct venue.
Until then, I assume reporting in some way is better than not reporting
at all.))
 
modules/Emails/Emails.php seems to be lacking some key class-level
fields.  Namely, these:
 
var $rel_users_table = "vtiger_salesmanactivityrel";
var $rel_contacts_table = "vtiger_cntactivityrel";
var $rel_serel_table = "vtiger_seactivityrel";

It makes use of these fields in its code, as in the function
set_emails_contact_invitee_relationship(), but they are not set anywhere
in the class.
 
This problem comes to light when you attempt to use the Outlook plugin
to link emails to a vtiger contact.  You get the typical "Invalid return
value from vtigerCRM" error message.
 
I inserted the lines mentioned above at line 38 in Emails.php and
Outlook email linking started to work.
 
Most of the Outlook interaction with vtiger in v502 seems to be sadly
broken out of the box.
 
By the way, anyone thought of improving the Outlook plugin to do
something other than stupidly report that vtiger returned an invalid
response?  Having to use Fiddler or some other HTTP inspection utility
to just to find the PHP error message from vtiger is time-consuming.
 
jpt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/ae70ce49/attachment-0003.html 

From remco at artoge.nl  Tue Nov 14 09:58:53 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 15:58:53 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
Message-ID: <86206992-3704-444F-8FB0-96CF3A4437FB@artoge.nl>

James,

Even the forums, aren't the place to report a bug, instead that  
should be done within Track

First see: community tab.
Gives http://www.vtiger.com/index.php? 
option=com_content&task=view&id=86&Itemid=133

Then bug tracker, you will need a track login.
Gopal is your man to provide you with a login, ask him:  
gopals at vtiger.com

Thanks for reporting any issues,

Best regards, Remco



Op 14-nov-2006, om 15:44 heeft James Tillman het volgende geschreven:

> ((If someone would fix the forums registration, I'll gladly start  
> posting these issues on the forums if this is not the correct  
> venue.  Until then, I assume reporting in some way is better than  
> not reporting at all.))
>
> modules/Emails/Emails.php seems to be lacking some key class-level  
> fields.  Namely, these:
>
> var $rel_users_table = "vtiger_salesmanactivityrel";
> var $rel_contacts_table = "vtiger_cntactivityrel";
> var $rel_serel_table = "vtiger_seactivityrel";
> It makes use of these fields in its code, as in the function  
> set_emails_contact_invitee_relationship(), but they are not set  
> anywhere in the class.
>
> This problem comes to light when you attempt to use the Outlook  
> plugin to link emails to a vtiger contact.  You get the typical  
> "Invalid return value from vtigerCRM" error message.
>
> I inserted the lines mentioned above at line 38 in Emails.php and  
> Outlook email linking started to work.
>
> Most of the Outlook interaction with vtiger in v502 seems to be  
> sadly broken out of the box.
>
> By the way, anyone thought of improving the Outlook plugin to do  
> something other than stupidly report that vtiger returned an  
> invalid response?  Having to use Fiddler or some other HTTP  
> inspection utility to just to find the PHP error message from  
> vtiger is time-consuming.
>
> jpt
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/564d4cad/attachment-0003.html 

From jamestillman at sevatechnologies.com  Tue Nov 14 10:25:50 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 07:25:50 -0800
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <86206992-3704-444F-8FB0-96CF3A4437FB@artoge.nl>
Message-ID: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>

Thanks, Remco.  I had assumed that the bug tracker was the way to go,
but saw no way to sign up for vTiger's Trac.
 
I clicked on "Bug Tracker" in the Community section and got this page:
 
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report
 
which has no information on signing up.  Clicking "vTiger Trac" in the
community section is also a dead end for bug reporters, it seems.
 
Did I miss something obvious?
 
By the way, is there any way to search by keyword in Trac?  Not easy to
determine if a bug exists if you have to scan the whole bug database.
 
jpt


________________________________

	From: vtigercrm-developers-bounces at lists.vtigercrm.com
[mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf Of
Dhr. R.R. Gerbrands
	Sent: Tuesday, November 14, 2006 9:59 AM
	To: vtigercrm-developers at lists.vtigercrm.com
	Subject: Re: [Vtigercrm-developers] A bug in
modules/Emails/Emails.php
	
	
	James, 

	Even the forums, aren't the place to report a bug, instead that
should be done within Track

	First see: community tab.
	Gives
http://www.vtiger.com/index.php?option=com_content&task=view&id=86&Itemi
d=133

	Then bug tracker, you will need a track login.
	Gopal is your man to provide you with a login, ask him:
gopals at vtiger.com

	Thanks for reporting any issues,

	Best regards, Remco



	Op 14-nov-2006, om 15:44 heeft James Tillman het volgende
geschreven:


		((If someone would fix the forums registration, I'll
gladly start posting these issues on the forums if this is not the
correct venue.  Until then, I assume reporting in some way is better
than not reporting at all.))
		 
		modules/Emails/Emails.php seems to be lacking some key
class-level fields.  Namely, these:
		 
		var $rel_users_table = "vtiger_salesmanactivityrel";
		var $rel_contacts_table = "vtiger_cntactivityrel";
		var $rel_serel_table = "vtiger_seactivityrel";
		
		It makes use of these fields in its code, as in the
function set_emails_contact_invitee_relationship(), but they are not set
anywhere in the class.
		 
		This problem comes to light when you attempt to use the
Outlook plugin to link emails to a vtiger contact.  You get the typical
"Invalid return value from vtigerCRM" error message.
		 
		I inserted the lines mentioned above at line 38 in
Emails.php and Outlook email linking started to work.
		 
		Most of the Outlook interaction with vtiger in v502
seems to be sadly broken out of the box.
		 
		By the way, anyone thought of improving the Outlook
plugin to do something other than stupidly report that vtiger returned
an invalid response?  Having to use Fiddler or some other HTTP
inspection utility to just to find the PHP error message from vtiger is
time-consuming.
		 
		jpt
		
		_______________________________________________
		Reach hundreds of potential candidates -
http://jobs.vtiger.com 


	
	Dhr. R.R. Gerbrands

	Artoge 

	ICT Security & Administration
	Jachthoornstraat 59
	6219 BN  Maastricht

	kvk 14083961
	btw 155595106B01

	t:    +31 43 325 0316 
	m:  +31 6 2127 8082
	e:   remco at artoge.nl
	i:    www.artoge.nl



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/79c869d9/attachment-0003.html 

From remco at artoge.nl  Tue Nov 14 11:33:25 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 17:33:25 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
Message-ID: <6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>

Hi James,

No, you didn't miss something. Your right, it's not easy to see how  
to report a bug, theseday's something more to-do, if I only had the  
time :-(


Yes you can search within track:
1) on the upper right use: Custom Query
After clicking it:
2) use [Add filter] and
3) select a filter option (includes also Keywords)

Best Regards,

Remco



Op 14-nov-2006, om 16:25 heeft James Tillman het volgende geschreven:

> Thanks, Remco.  I had assumed that the bug tracker was the way to  
> go, but saw no way to sign up for vTiger's Trac.
>
> I clicked on "Bug Tracker" in the Community section and got this page:
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report
>
> which has no information on signing up.  Clicking "vTiger Trac" in  
> the community section is also a dead end for bug reporters, it seems.
>
> Did I miss something obvious?
>
> By the way, is there any way to search by keyword in Trac?  Not  
> easy to determine if a bug exists if you have to scan the whole bug  
> database.
>
> jpt
>
> From: vtigercrm-developers-bounces at lists.vtigercrm.com  
> [mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf  
> Of Dhr. R.R. Gerbrands
> Sent: Tuesday, November 14, 2006 9:59 AM
> To: vtigercrm-developers at lists.vtigercrm.com
> Subject: Re: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
>
> James,
>
> Even the forums, aren't the place to report a bug, instead that  
> should be done within Track
>
> First see: community tab.
> Gives http://www.vtiger.com/index.php? 
> option=com_content&task=view&id=86&Itemid=133
>
> Then bug tracker, you will need a track login.
> Gopal is your man to provide you with a login, ask him:  
> gopals at vtiger.com
>
> Thanks for reporting any issues,
>
> Best regards, Remco
>
>
>
> Op 14-nov-2006, om 15:44 heeft James Tillman het volgende geschreven:
>
>> ((If someone would fix the forums registration, I'll gladly start  
>> posting these issues on the forums if this is not the correct  
>> venue.  Until then, I assume reporting in some way is better than  
>> not reporting at all.))
>>
>> modules/Emails/Emails.php seems to be lacking some key class-level  
>> fields.  Namely, these:
>>
>> var $rel_users_table = "vtiger_salesmanactivityrel";
>> var $rel_contacts_table = "vtiger_cntactivityrel";
>> var $rel_serel_table = "vtiger_seactivityrel";
>> It makes use of these fields in its code, as in the function  
>> set_emails_contact_invitee_relationship(), but they are not set  
>> anywhere in the class.
>>
>> This problem comes to light when you attempt to use the Outlook  
>> plugin to link emails to a vtiger contact.  You get the typical  
>> "Invalid return value from vtigerCRM" error message.
>>
>> I inserted the lines mentioned above at line 38 in Emails.php and  
>> Outlook email linking started to work.
>>
>> Most of the Outlook interaction with vtiger in v502 seems to be  
>> sadly broken out of the box.
>>
>> By the way, anyone thought of improving the Outlook plugin to do  
>> something other than stupidly report that vtiger returned an  
>> invalid response?  Having to use Fiddler or some other HTTP  
>> inspection utility to just to find the PHP error message from  
>> vtiger is time-consuming.
>>
>> jpt
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/ef6bad09/attachment-0003.html 

From jtk at yahoo.com  Tue Nov 14 13:49:47 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Tue, 14 Nov 2006 13:49:47 -0500
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
Message-ID: <pan.2006.11.14.18.49.47.164625@yahoo.com>

Dhr. R.R. Gerbrands wrote:
> Your right, it's not easy to see how to report a bug, theseday's
> something more to-do, if I only had the time :-(

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart

now links to

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets

which links to

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess



From joestewart at users.sourceforge.net  Tue Nov 14 14:09:57 2006
From: joestewart at users.sourceforge.net (Joe Stewart)
Date: Tue, 14 Nov 2006 13:09:57 -0600
Subject: [Vtigercrm-developers] trac Account Manager Plugin
In-Reply-To: <pan.2006.11.14.18.49.47.164625@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
Message-ID: <455A1485.3090109@users.sourceforge.net>

on 11/14/2006 12:49 PM Jeff Kowalczyk said the following:
> Dhr. R.R. Gerbrands wrote:
>   
>> Your right, it's not easy to see how to report a bug, theseday's
>> something more to-do, if I only had the time :-(
>>     
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart
>
> now links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets
>
> which links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess
>
>   

Just a side note.  There is now an Account Manager Plugin for trac that 
allows users to register for an account:

http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin

Joe


From remco at artoge.nl  Tue Nov 14 14:26:49 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 20:26:49 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <pan.2006.11.14.18.49.47.164625@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
Message-ID: <314E9A1B-3A8C-4EE8-8B59-E2749627A2D8@artoge.nl>

Thanks, Jeff :-)

remco

Op 14-nov-2006, om 19:49 heeft Jeff Kowalczyk het volgende geschreven:

> Dhr. R.R. Gerbrands wrote:
>> Your right, it's not easy to see how to report a bug, theseday's
>> something more to-do, if I only had the time :-(
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart
>
> now links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets
>
> which links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/e739431f/attachment-0003.html 

From jtk at yahoo.com  Tue Nov 14 15:38:16 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Tue, 14 Nov 2006 15:38:16 -0500
Subject: [Vtigercrm-developers] trac Account Manager Plugin
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
	<455A1485.3090109@users.sourceforge.net>
Message-ID: <pan.2006.11.14.20.38.15.301337@yahoo.com>

Joe Stewart wrote:
> Just a side note.  There is now an Account Manager Plugin for trac that
> allows users to register for an account:
> 
> http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin

That, and the WebAdmin plugin, which will eventually be part of Trac core:
http://trac.edgewall.org/wiki/WebAdmin

Trac is currently at release trac-0.10.2, BTW. We're running trac.0.9.5.



From jeri at vtiger.com  Wed Nov 15 01:28:51 2006
From: jeri at vtiger.com (Jeri John)
Date: Wed, 15 Nov 2006 11:58:51 +0530
Subject: [Vtigercrm-developers] Bug in soap/vtigerolservice.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
Message-ID: <10eea4db828.-8020503555403603074.-7158338222294584874@@vtiger.com>


Dear James,
              Thanks for your fix.We have integrated this and checked in to SVN.
The revision is 9840.

Thanks & Regards,
Jerry.


---- On Tue, 14 Nov 2006 James Tillman <jamestillman at sevatechnologies.com> wrote ---- 

The vtiger forums are down, and there is no immediately obvious way to log bugs for vtiger, so I'm resorting to subscribing to your mailing to report a bug.
 
Using version 502.
 
On line 754 in soap/vtigerolservice.php, there is this code:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.$account_name."'";

Besides being an invite to a sql-injection attack, this also creates problems for the Outlook plugin when a contact in Outlook has a company name with an apostrophe in it, and that contact does not yet exist in vtiger.  The contact John Smith, with Bob's Pool Hall in the company name, for example, will create the very unhelpful "Invalid return value from vtigerCRM" error message when you attempt to sync using the Outlook plugin.
 
Modifying line 754 to read:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.addslashes($account_name)."'";

while not the best option for a fix, does cause the contact sync to begin working even with apostrophes in the company name.
 
jpt

_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061115/32ed6281/attachment-0003.html 

From fboudra at gmail.com  Wed Nov 15 05:14:40 2006
From: fboudra at gmail.com (Fathi Boudra)
Date: Wed, 15 Nov 2006 11:14:40 +0100
Subject: [Vtigercrm-developers] trac Account Manager Plugin
In-Reply-To: <pan.2006.11.14.20.38.15.301337@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<455A1485.3090109@users.sourceforge.net>
	<pan.2006.11.14.20.38.15.301337@yahoo.com>
Message-ID: <200611151114.40395.fboudra@gmail.com>

Le mardi 14 novembre 2006 21:38, Jeff Kowalczyk a ?crit :
> Joe Stewart wrote:
> > Just a side note.  There is now an Account Manager Plugin for trac that
> > allows users to register for an account:
> >
> > http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin
>
> That, and the WebAdmin plugin, which will eventually be part of Trac core:
> http://trac.edgewall.org/wiki/WebAdmin

Web admin plugin is already installed. are you interested by adding 
AccountManagerPlugin if it isn't a duplication of webadmin in terms of 
functionnality ?

> Trac is currently at release trac-0.10.2, BTW. We're running trac.0.9.5.

in TODO list concerning infrastructure:
* update gforge
* update trac

just, i lack of time atm. We'll do asap.

cheers,

Fathi



From jens at Strawberry.COM  Wed Nov 15 06:40:42 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Wed, 15 Nov 2006 12:40:42 +0100
Subject: [Vtigercrm-developers] [FEATURE REQUEST] Support Multiple
	SalesOffices
In-Reply-To: <20060825232016.F13092@Strawberry.COM>;
	from Jens Hamisch on Fri, Aug 25, 2006 at 11:20:17PM +0200
References: <3E26E7A199CABA49822B3E6B741434F97D0914@exch.accuratetechnologies.com>
	<20060817165659.B21264@Strawberry.COM>
	<20060818091439.U2464@Strawberry.COM>
	<20060825232016.F13092@Strawberry.COM>
Message-ID: <20061115124042.D4158@Strawberry.COM>



Hi Dennis,
hi *,


it took a while to check everything out and finally to upload
my changes to the SVN, but now I finally managed to do it.
The feature branch 5.1_jens now contains a copy of 5.0.2 plus
the following changes:

    FCR 2035 - Multi Organization and Organization Units support
    Postgres 8.1 support (5.0.2 does not contain all required
	patches)
    FormLetter support (Campaign reports may utilize the contacts
	as secondry table to generate a list of addresses to be
	used as form letter database in openoffice/staroffice/etc)
    Some bugfixes regarding vtiger 5.0.2 
    Account-Contacts filter on SalesOrder-, PurchaseOrder-, Quote-
	and Invoice-Popups): If an account is specified, the popup
	shows only tho contacts related to that account. May be over-
	ridden in the popup).

This version is based on vtiger 5.0.2.
It is almost a snapshot of my working vtiger copy.
It runs stable in the following environment:

    Solaris 10 (Sparc 64 bit)
    Apache 2.2.2
    PHP 5.1.4
    Postgres 8.1.2 (with perl 5.8.7 backend)

It is currently available on SVN only

    svn checkout http://vtiger.fosslabs.com/svn/vtiger/vtigercrm/branches/5.1_jens


The branch also consists of a SQL-Script to migrate an existing database
from 5.0.2 to 5.1_jens:  schema/502To51Jens.sql
This script offers the opportunity to use 5.1_jens on an existing database.
However, I strongly advise to produce and save a backup before doing so.

You may also start on an empty database using the usual installation
prodcedure.

If you start from scratch and populate the database with your entities
(e.g. using a SQL dump from your productive database), you'll have to
adjust the organization assignment before using the database as follows:

    INSERT INTO vtiger_entity2org
	SELECT 'vtiger', crmid, '1' FROM vtiger_crmentity;

Replace 'vtiger' by your organizationname in this case.


I'd appreciate any comments on my addons.

Kind regards,
Jens




On Fri, Aug 25, 2006 at 11:20:17PM +0200, Jens Hamisch wrote:
> Hi Dennis,
> hi *,
> 
> I've opened a feature change request in trac on this: #2035.
> Attached please find a proposal describing the required database
> and GUI changes.
> 
> I'm on vacation for the next 2 weeks, so IMHO I could start
> working on this enhancement based on the GA aftar my return.
> 
> 
> Kind regards
> Jens
> 
> 
> 
> On Fri, Aug 18, 2006 at 09:14:39AM +0200, Jens Hamisch wrote:
> > 
> > Hi Dennis,
> > hi *,
> > 
> > 
> > I'd like to post a proposal for an implementation of this feature.
> > In advance there's one item unclear to me:
> > 
> >     What is the "official" procedure to add items to the
> >     vtiger_tab and vtiger_field tables?
> > 
> > As I'd  suggest the introduction of new tables, there should be a
> > new table identifier on those. I'd like to ensure not to get into
> > conflict with other addons and the ongoing process from RC to GA.
> > So how do I "reserve" unique table ids? And is there a space for
> > private tables (if someone adds private stuff)?
> > 
> > 
> > Jens
> > On Thu, Aug 17, 2006 at 04:56:59PM +0200, Jens Hamisch wrote:
> > > Hi,
> > > 
> > > > I also agree that there may be a default sales office for
> > > > sub-organizations, but I don't thing that sub-organizations is a
> > > > prerequisite for having multiple sales offices.
> > > 
> > > yes ...
> > > 
> > > The problem I have, that I need support for more than one entire
> > > organization. So my point of introducing organizational units was
> > > to split this off the organization table. The wording doesn't matter
> > > at a first glance. A 'sales office' or 'location' would just be
> > > some abstract part of an organization.
> > > 
> > > > Jens, are you going to work on this?
> > > 
> > > Yeah.
> > > 
> > > > I'm going to be offline for a week (military exercise) so I won't be
> > > > able to work on it for a little bit.
> > > 
> > > Have fun!
> > > I hope to able to present something to you ehen you'll be online again.
> > > 
> > > -- Jens
> > > 
> > > --------------------------------------------------------------------------------
> > >      /
> > >  +##+|##+   STRAWBERRY                     Jens Hamisch
> > > +v#+v v##+  EDV-Systeme GmbH               Managing director
> > > / v    v\v
> > > | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> > > |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
> > >  | .     |                                 Fax:          (+49 8171) 41805-59
> > >  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
> > >   \____/    Strawberry at Strawberry.COM      
> > > 
> > > _______________________________________________
> > > Get started with creating presentations online - http://zohoshow.com?vt 
> > 
> > -- 
> > 
> > --------------------------------------------------------------------------------
> >      /
> >  +##+|##+   STRAWBERRY                     Jens Hamisch
> > +v#+v v##+  EDV-Systeme GmbH               Managing director
> > / v    v\v
> > | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> > |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
> >  | .     |                                 Fax:          (+49 8171) 41805-59
> >  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
> >   \____/    Strawberry at Strawberry.COM      
> > 
> > _______________________________________________
> > Get started with creating presentations online - http://zohoshow.com?vt 
> 
> -- 
> 
> --------------------------------------------------------------------------------
>      /
>  +##+|##+   STRAWBERRY                     Jens Hamisch
> +v#+v v##+  EDV-Systeme GmbH               Managing director
> / v    v\v
> | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
>  | .     |                                 Fax:          (+49 8171) 41805-59
>  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
>   \____/    Strawberry at Strawberry.COM      
> 

> %PDF-1.4
> %????
> 1 0 obj
> << /Length 2 0 R
>    /Filter /FlateDecode
> >>
> stream
> x??Y??\'?_i???\L??#E?v??^?]?/??U5S?????g&?V???V????m??H????_B
> y?"Zu??m??U??F?Y~??O???=???ya%`^~??WB)??Q??J?????wJ
~|+???I_?7?)??<?O??<O?f?<N?f
??v
> U?|$?*??|???*???gX???????'????BSb??k?a????/+?mO???u?????
?x??(
?
???????B??0?W\??g?
1J
?h?T?iH?gZ?g???5y?,1d?o???"?dP???????eR5+?*1W~????3?C?X?Y?\S?G??lWft??$}k????L????M?${?
??9?????6P?
?
?WK???Z{?6???F
??
??pC?E
K?y
t???}|C~???C?`1F?S?QF?A?? ???r?56?L???F?
> ?_A?m`D?
???v|?u|P????_???F0??Kl\??8F?o??zV;k??$?(?m_?qC*??????)
XJ??)??@?=?$?????????5?y?M?w?pWv
?/|?Jy???[???$??W?O??#%??x?):??eU?????T??H0?Zxx??JKOu???C?mJ"???????H???`X}11?.E??g??X??w ?
???j???Y??"!?Tkh?.???	FVNxV:?uge??ov*]?'?L)JR???P???????Y?d
???pX??l??s???oB=Pf?RV4&??d
??[JH??K@????X?u?)????y????K?S????9??
??j?
\?F`s
8?46&
??S???????2?Ru???Ba/#???F11b???{?????!2<?s????n????????iP
??d????
z6=0)??z?xdW?[.Il??b???iu????????O???#?<??M?|
N??r???\???9H???????T?????????d3?]??U
?-????+??2I?<???.?u?5??-j??????Z?I@?|?~M????Z$?"??&S??a=?q,?Zc???R0?\j?e????_]??ia??-??|?CQ?>?wR??????J?/?BB}???phOe?????<3?R??????^?*Fn? ?`??I?4??X???)U?5?un>??1?cY
b???,?D>??	?????`=B/U??o??1/?d<}?5???T3?w^??
?n2c?-???x?;?
|0y=
o???zt?wC?
?????_>?kx?Mcl?y??
Y&3_???:????i?????9???I(j??1?????o
?Mo?e???t?2??ve?G??{?l-?Du????r?????HS
LJ?h?sF??&S+????P?F5CK?:?;???8nT-4???6?WP??z?X?????9mh8??s????
V?J?}??5????P?w?=%??7{J??T???????.=^%J??'??????I[??(?>wIR?p
> ?r?W:J[??5?
??<v&??P
3Y???:???????E&??l?+Q???????TFK?9f?6k??L?s??*???w????l??cT?????/1???Do???f?r1?
?W?B?K????????no??
1??;?9[ZFv??^???2*?9?e??U?-??*?2QV???g??J?&????lb????}??????.?_}
{?>????????8??T????????x??
endstream
> endobj
> 
> 2 0 obj
>   1713
> endobj
> 
> 4 0 obj
> << /Length 5 0 R
>    /Filter /FlateDecode
>    /Length1 9796
> >>
> stream
> x??z{|T???Z{???={?{&?d?0&<?0I?0	?C#??@F'O????p?"	???9
j-z????p?`??z?h=???U???Xs????:???=CDk?????????;?^?z?{/?????E;A???5mO?
>??)B?X??KJ????_????a??
??!r!??aSO??A?&??/!d???PSo?~?U?2v?s??A??X
?SP??is??;?T?
?;P???????P=??&?/?\s???
????fs????!??????????f???????u4??????m1oB??>Z at yZg??
> ?J?????h0?????Hs?gd?$??????O??u#?7???d???_~??????e
> ????.?J???2?
?i??h???h???|??[
o?h??<????d1z?@???It
???:?6t?`z?=t<f?S?	u1G?
Z?j?m??^F????ss
> f???r}?rfzgL?65;?6?????Hw?9?6??l2DA??j?*???X?`4???*?9^?????I???Z??,?Sw?2???I?_?g|??9Y?3???2???t?c???2??9??.??vJM*?o??6?
???a???#J????)???4?E?E
?????Z?0?v?-?2????;? ?.gf???1Y?Zb??0 ???????95q~??]???LI??E1
???
????tl???=?DT?j?=?5?????"Y?Mk(K)?????'?H?M??????)_?b??????ZT9?>???,???%0b????d???,?????{???[{??[UUe?K=? ,V?RG??rf&??b@}?
??RC?,m??dZ??4?CK?@05??Q?????????????b?5r??????[\?jJ
?
V?	/?r'??|U?"J??f?3)???p?JovJ??;`??T'???J?K?
s?`?\Yy?Uf?9+?e?
i??(???????R?j????#??y????e
?l0<XsjbG?G=???/l+
????0????!g?lOUL7?y?{?
e?*??nC??j??*?????
.??
????T?%`???*'????kO?T?@q???Sl?<j?;??E)????9t*?j??qwe?.?Z?q?yA
a?s?f?e-??q?grz???(?TKL?=?'?VSi?????
???iQ%q2UI?q???`?E1??i?A??????q???EU?h@??????u?R???$[?'E?Z? ?(???6d?C??;8?gZ"@ ??&??z??zdj??
> '"*?????}??x</??7???3????q?????=`????X_?u??N??gf?
AZ3?)&?!v:Q}P#f
> B?Z,

?
?W?1??-?cd?a??1??H??-kI???F?f??K	???????????*?????7?#>???????m?????L??.?m??-Y??l???{??{ql?3?c/???????G?k????~i??m???~??=o`?z?b???4K???p#?
t?QA????J?	!?QP??~?3?
?M@]???8*.*.??J??2??o?Z
?l?A
%l??????DEC??3d?{??o??e?{{????g`??u?"??AW?bzZ?E???????N??q6???w?8?=??e?r?J<5?YP?? ?JO??";?6????9`
> ?
??dE
????!:??MA?
z?F???0DE??g~/??L?8??
??2???
??x:??;???|?!????n?zQ?\)
7?
> 
	y??Y^}D???(?????=?J?b?P?X?V
?TbkV~7P???2???
~zC?????????U;J.?Y4w??????U-?V?X??%???????a??~?????jP~0??'?{??Z??J?(???2't*?W?C?,?D??J?HV??????l???_|r?21?.1??S\w? ?r`?:YRq#/?/O[??1m{?Pgry\?L?HX!T,??#?3?b?ff???????L?x???S??L??t??)???9.??]?=?`,:
S?w?????wDV?Q????)????????o?(?T???e???B!l0????????@?`6(]
?u&C
> ?r???\??e?O??tE?;"???
???????\??
V?1?
fz????:-?z]o?????????J?N???	6????-\
> \?
?'GP&?,?bq????R?_?W8?Q?2"V?Q???K?E,?Z??o?b?~?12?????F??4????v??
@@q?x!???	??
6qQQ^.?S&-??????e?v??H??U?
?-8qb??h???????{+??'??z?gvI????={??????;??\?A}VpN?

t?????`?Q+?^?JE?(H?U???!!(0BR?)e????S??&?G???93???'8???????3nOD?h?Zz'??t?????,?l
 j?zCm??]Pg?t*?1	#*q
???d/5?5??=?n?3F??6????C???P	?? [c^n??B??N????wG?51??O???
???????o??????jg??*??k???~?????L?e?Y+??VT???~????7?6'-Jv{?b1??/G?J&??"??????[r??????	0??C?O???6l_?4??????9?????r?p??4???6c??.?N?L?????6#?4????z?H????d23I
????K??:S?
??d?<^?U???O???m?G?1??jN????C???H+?%?5??}\?9?b>?.?????B?B_?12?????H?????????????c*??R?????}?G_???H??j%?	?<?^???{????-?$q??_={v[?????_~?s?#???v??????????m55???4??k??M?Pv???~?3?a"!??|??p??p?6??{?q!?????I?=?#???G	?%?PmUN?@|??e??`?z???0?C+??????1??BX30?0&v,?bR
???"???r??|! '?3R???0?E.?(?O??z?P|?8??????/g?y?r
? {
?????sq?8?Z?-Sp^?%???0o?
#?	?6?(????u??? b?U
U??:????'??????x?@Va?Aa1???`6?(??????|?xU?9???kW7????I?G????
??s?>?c?C?????VO?
&?
??w?9?p?+?1???:S???(???,\)??[ko?r??t???1=???@I/?8jI?P?P>?8N?'D?9?Jnds?
?+??j??UIJ??
> ?t?{?z??u?3??,???"?yB?{c8??y?z?G????~t??
l?z???????c?5D?$????v?mh~p?xl^s??R*,?T?*U#iV)-+???C?8??'?????Dh<?|?L	D????d1#?????,??????????!??z?
> ?s?#\?x
??hL\?w#
?y?h??%~v?????????>??{?5??????m?:#p]5??????????2?	*p?G?9?-

?A??k?z??
m?????;I???jzj?????.????{
?By?=l-s5?6?m?n?2?7?i??f?l?b??F???h?
??Z7?<?jsd0?|2?%?u?M?8_T??E6l?e?

?u???? ???`zTB?(??????????C??O:#?

> !?Cv%?0ZvJ~??XT?e???x?T7x
?NY??????l<?K}!w???????g??X??o????j??\???o~]}??+?bYS??+74?TwC??????????u??-?
> s????SK??O????s??????7??-	??di???s??Kn?M?g?.?*P ???	\?x3X	3??,0<?CA
?c>?M?1>???m?-^b????_?
?*?G??????
d???
> dA??fn??j???????j????M?	6ee
??2??x???r
??2)H?f1?+?'????????N?b{????????%???a
TE??`+&??n?_????m???g?#H4???a?lLk
u?%/9???,?XP??dwE?F???v????7?5??????;~=td`??????o_}%?'????;x???=?3z?RW?E??j??????0?).T6)YV?R5??`???1????P??}
> dV(?/y?
> bCx
?
?T?$
B,Ks???!????vSN??r!
\*?
???!n?
'?T?e?_=!?*???????Q| Q????<P??????S?Ieb
?????:?`%FaT%"???3h?Cy?y|2???&	??
??
8?m?????db?O7???Mk?y??e3??F?
f??
> ???m????^9K]?
?/??)A?J?D?D?B??	B??????x?!??A?F^&BD??Z???c.???e?(e??k?g?,<??Om{??Om?l?<????3??&??N???Y?0?????????s
> ??At\?n???~?0z?(L1?????Uf?
?7^?1B???C????I?*N??P273?z?=?d?"='??:?n??V?<?D????G:!g???"????M?);??N????>'u?I?r?'U????'?<??3'
?V??~??G
> =?????9???6W?????Jx/a^2?.?Y?Y?/?y??_?s??%o??	vp?????B at uj???R@??????0~?`2&d?Vaw:3??F?Z??
#>@??,acI??	?j???A?eOz????%?Y?B??J?~??K+??????????ujA?{???#=?<???/?~?z?????????fY?=?my??j5?~I???ucz?7?j?]4
??u/?????sU??a?F?4?C??8?3 ?????A?&??+??6?Q????4+??x???t????+???H?YqQ?H???[???-
???????Yx??iW<xb'??s?q????????q0??K?????j??J?R?b?]h??&
?B?C0?T?458???^?{Q??U*H<??*
a#?? )??
,	5?"?(|6???CrK
??U??P)??b?????????_?G??c??k?~<z-?^??p4???c???
?,q??_N\JF??K??=8????'2[5[??%
kd%T????ZD??E??Y8?vUj8??W)?<
?g??0???
> 
1?h?j???
> V?h??"\???*??!?!??
?W??,?X????O P???2??9???C
????7?s???:s?Z?kr???$_?&???&.&Z
> ?$n?O4^??G????L_??
??????A?P?
??????X?#HfA??#`?$???Y?1???	??1?????rp???
> ?????7???"?z?? ??$?M??????@n??k$c??c?3o??$?#????c?	E?G??oe?????7X??v)?+'B?????
Ekb?-?Ea?????&f?????F??a
> !??
?????_@???I?
J?b???(??GQ5???0?
> dc???\?f???gFQ??@???v
k#K????'?cA????_p??e??^???&??	????>???{?a~!?????X?Q?@qU9MY???JS?R???)=h
?l? "??Q@
???F{E??I^????8???
?S8A.???????p????p
??!
+???;?*X????1?37R8??D??	ZH?R8???2
sh6iK?<?????N-n???????^??????Z?z:?74uIk????[Z?z??E?
m?
5]??[?????
???n??I?GwJ

?

[?gIK??uu???CRs?T#uu??7l???(?6??U???\?$m???j`?
??]

@U??????????????::?s??6??5?6to???\8G??WJu??V???I?????W??y???hs?(:h????????m???P=?j?^X
jEm?u?????Ze?+?o@???-???
8???+???
> ??C9)??????&x?[???k
P6@?U???\#?cW??[????????.y?z????ZQ??????p?&??j=P??3(e?]?d???j?g??-?g?z????	c?j7??????i(}k?*y?n??g?K?s??????f??q2?????zrSk?L?6??I???\??Jt
??Kh??????|???w\???)~?????w????????{??B?"????m?????w?%??x?N?N2???}????a<2Z??????%?|W???H??{?]???{????|W???|W?7?%??z????^?y?5?[???Vg?5??????YO)Q?????jK??jsnjul?bun?????b????fKzc?????hh2;?????X???q?}?{
?v?D
?z
"?OT+]?????}???G??
0P?t?D
???
??Q?j
?C???j??
> ??
???JW =|*?
?}??R`1??~?6?????????Y??9??~?t!{???,a?G/?
L??????;?t?Mg4?u?h?juz-??C?L^????B??u?W??yJ)T??\????c??h????	C??$??.????{???????0~?
> Zc?C??c:?@a\?n}?)?????O???????TYU????/_]k????S???*H???{Q?H?I=?4?Z???6%??1=@?????/Gt????????n????Q
> endstream
> endobj
> 
> 5 0 obj
> 6721
> endobj
> 
> 6 0 obj
> << /Type /FontDescriptor
>    /FontName /CAAAAA+GillSansMT
>    /Flags 4
>    /FontBBox [ -161 -229 1040 916 ]
>    /ItalicAngle 0
>    /Ascent 929
>    /Descent -230
>    /CapHeight 916
>    /StemV 80
>    /FontFile2 4 0 R
> >>
> endobj
> 
> 7 0 obj
> << /Length 383
>    /Filter /FlateDecode >>
> stream
> x?]??n?0E?H??????)BJ?F????LR?? ?,??
{iUu:??x?=?f????W??o?Bzul\???^}%? ??
?6?n?????e??_?.???????*?????K?oj?????a????wR??M????u_r??8?\?r
k>??sy!?~_M?????:Q???Um-??????$a???\?v?<???w??Y?c?Y?1Z?q??? ??# ?0????`??
??$,
k?=X`H[??<r??w;??	hG?'??IQ@??}2???
h??0??}Rt?'?M>}4}2
:??4}??M?]?X0??h???.????8?3F?w?????a?18??4N~??k;?M?oP??endstream
> endobj
> 
> 8 0 obj
> << /Type /Font
>    /Subtype /TrueType
>    /BaseFont /CAAAAA+GillSansMT
>    /FirstChar 0
>    /LastChar 34
>    /Widths [ 1000 250 479 500 384 277 729 426
>      770 219 437 500 500 280 500 500
>      500 500 823 395 426 416 333 551
>      666 509 219 323 500 323 458 250
>      500 719 437 ]
>    /FontDescriptor 6 0 R
>    /ToUnicode 7 0 R
> >>
> endobj
> 
> 9 0 obj
> << /Length 10 0 R
>    /Filter /FlateDecode
>    /Length1 9292
> >>
> stream
> x??:{|?U??~?$????N??|i(CI???j5?/???R?E?I???<Z??K?L????*?:??
?t??@??3?"??:+???(?3B???_Buw~???????{????9?:???H?6"VE??}w???_!?

?w????A??x??m????\0!D?!??|???9ew?!?L d??
?4
> g6+r??

???h?@?
hOm^?y??VM?C{?????????D(#???"w??k?e??mqudUt?R???1?m?
?1???kok??=?????A??
?0|?G(G????B?JSk?:^??&??j??;22?8EW???a?R???F?g??]?/M???@????^????5?????#4??yY?/??>?~?????i???a??????????~'??V???K???_
??y?
????F???8
E?VlD?P?P?????
> f?}?y???3<WN?"gZ?Tw?KtN??p??mV??d4?^????TJ?24
?????
?+<??U??j?_?N?????2\6???E_kg~?=e?}C????r??!T?N??@?l\'?U4??+b	{Yc8+????????"E???:??]M?????
Us???k??P?W
??R?;#a?$??
> -??@w9?#?/G?'?m???e?0c?	?,???c?`$??C3??o
P}??it7F???"@?!DgW4?9V7?	6????b?????9??
V}k?t??j?\?
	?	?'q
????????I???OL??????.R???????
> 7l?U??+6o??$O)
4?[??-BgE????i?*? O?h?D??????FwEc??4?{Y"X#W?fI?? ???.???#?<.?s%
=???????;?j??	?z?????H(?
6H?
bU??a?lRDg????????0???rU???b??(?????.???z?l?sD?Jwe????-V???#???????4~[EN??
U?G
???u	!???????
8\??K??KM&????
)????
> ??jj]"???:????5?'kbH`??A?)?EgO??,
?\?:???
??7?&?"?w<??^?#LF?]1?LF6^?\
v?)??0jN(?M????X?|U[???hr<a,??
T]?
4??<p?KV?Wx?A	/??'??
s????
<??"????????V??Ir?(r?Ap??B.?K?
??/6??F?F??\M|?
/????0?q'6???e??4e?i?e
l6KY?b??8??N??0???
A"??V?a??
O?n?{h????v?7d(.??@I?P(??	??3=}??????*?O
???????;w?/???????b
?w?-:??i???v1g _

?Z??z?4???<O
?x%?P? ????;^????~??K?>/
> ????<lv?M????????????]??
?KW|/~?X
???K?+o*:}???x?*|D:
?Zd?}H?x47??
> Z,E???P??????V??????\??j??N???h??A
????W{?????
> gQ y<?y?Y
~D)BzZ.+?????X:??%???'???f?4??P?@
?H0??`???????
??E??VW???ZmRc?Z?C?TZ?(gH?sI?Z?Cz?+?k??lN??ly?:
????af??&?`?d?,R?"?`?l???B?????d2???b???74???(?;?cc????t?b?g????C!?7????&???Z0?h
(
> ??,2??A??F??M:?k??JO{f?M?????:?.???1??????????H?m????N??Z????i?;]????oh???Yu?9???[^L4?????+???????k??D?&>ffB??GT?[???????AH???
?`P	???L?j
T	????k??J???Q?p~?? ???0|d??????<???P?,??!
?la?4wc:p?o?+?v????_?z??G?x???'p??
X??W?Ez???~??(??^0?}@#?2??B?3??ax???u#?p
N?|???~??g????Q???MWwT?.]?M:M'?O?k????	??L?
> ?0x?G??-? ?T)?-???F?F?]???<uP???S???VA??w?Vd??KDz
?D??p????J_H??J???????k??7?????+O????}8???N????#?M??\?<?
?????4?BqR?f?h???+8?q?d?k??F?7v ?????q4g????i?TX?r

?c???b?V?q?0?v?P%}:??X???.r??5?????1??
??Pm?K??<U+m?????F?A?t?v?	????????
???W??b???/Zx??(p??.4hs?F?WO%??i4??
> ?R	Z?P3i?Q???XR?ME??????d{?t?F?M?BBs4??IK{L+?????p?B?R@6p??`???MK?xY(]?>????R_???x?V??b?n????/??[?k???<8??}???6???v+M?!???V?????=^f?&???????%?t??
?|?s
> R??????{?9ob?4???}??%????y7?]???E????>?/-i?	??'c@?????&
?q?[e???????W?7Z?~^,6?????c?67?M-????}?y??????????|/=l7????*J??M8?1?J`_??????????B=!??B???O?tv
???,???7???IwI??O???\
k?????????%?????w??8??,?4??PT`??nf????|????S'??i:N??4?n?G??????O??o?????AT??????6????g'F??I??m?D:r??d??)?Z?????????K?U??C4?5?0??*M?^??6#C??`???GN?I9{??N?B$???M?^pq%B???q,?x?
9??*?.??E????epIW?v??5??=?w????v?????????6
??????.niX?~???????Fui??Y??????Ga??|?????
?*?m??
?????{??M\;"_???Ia??&?e?X?i?xo???
> ??8?u?tO_??e]O?M Xn????g????e??+?yUl?2V????t3???`)?X??A(,S??"???????xI???M%3C???Z??*_T2?B???b?Z-8h?Y%???,M?"A@c??ac?0?5?C?</???$???`M? ?M?????f??)I?!??DZk?lIz??g???MJ??
???,???h?A?H??n(g?
?}4s`??\<c?????||?=??m?????|?1{????????t????[6?	????p?\?7h????T??????t;????Z#?:(2?W
> ????Fz???+?*F???F???v#???4?n?;??,?????i????)?i??'\??
g???*?f
> &H??O?I?f??YS?0+?~???
> 
????E?xn???^??N<?Y???:??wf]1????-???.[?i?
m?G????j???`f??o????
=!O@??'??&?Z?????k??????<??J{????? ??????????Y???????k?????^8?!&_????N|LOSi^%?4Q0?<b?|\1?kA.2???R@???n|?,???^?g6<??????z?4?}?????D9F?
H???e???n????*JT(l???4?1e2y?P?5?????7?pfl??2F?<Cg??J%????$%TX')??$?R??:?Y?'??uT:????f??????$?Y????_>0??????w?A????;?	
????V???+?;?FC???? ?,?Bc?'??o?$?jJ"8????bFX?gqhmp????4?z????x|;?@?K3?+,gbY??
> F&??!<?(?3
?(??,???h{SO'???N??u

> ?d??.v????kO>???n0???+??x-????	?h&????=???1?w?w<?O?2?4???{??RphV
o???Y3?
!$??z????{UG?I'?et????k??b?U?:.?~y?C?e????/7u??H?{a??_?????9??o????z?_/?)???h0????7????J??+??.??????10a?O?\_??{;~!??k"6????G??S?????
a?9?'?)Pqp
> ?AI?P????<??X

> P`?!?
Q??pJ?$6c?
???n)??X??????q????????T??y???;(???*?4?
> ?@?K?`???? ??Td??P? +?M???+????????<?N?$?n!9??;??RIb?&=?/?n???(????ts[??????z`?2l????P????
?S?g?]??????A???) N?_???QD???4E?2$?{<???????dS?O?Q???A?mw?
N(}??3??U3q??p???@?
????&?????
H?`^?h?c at d? ??8t???????m(??Cm??Z)?(??kBr??"W?1?o???f?n|??????m?Er`YK?A?^?Vo
Q_J3<X??W??	?PW???#F???s?y?????A?y???y????L$????z?>????[?????????uRK.V?????A\4?`p?i;e?7??1Q?_Q??KH?k?4yT??J?(?ZC?19?_?
IC*(D?????????h?n??
?>????1)?3??r????\V}?A?
id\?????L=?;bu???T2?k
:?77s??N?y/?t????)???????d????????????R5?+{?Z??DuT????????
y?9??k???7$??m
~u_?9R'9p?Uo^??`??4]???<U?w+y??U????P|?w????p??Ny?f1*fZ?z?R???<(???=
> ???0?
?%\??P9s??a>?2???v???$?3!xaN?c???
????
???\??????Z?&?.?Q
@?{???
??????^Ao???'?f? `?`?q??F?q
B???QlS<?xYiW^????y?????t?"b(??
y? ????EF??IY?L??+t$
Sp!??i??N?p???)?
????!

UW???	?06???wR8F6??)?BJZH?4?M?R8??????Yt{
> ???????-?-?u???6??????????=???S?i??[W?v?k??e??m????X?j1??8???????+Eyv??
????
m?)^??E??
??X?;?#??U??bk?????XC??*?N???f?c
??v?*?Zl??wF?n?j?u4????????kJ[W6N??+~uH$c??X
m? ??f???
pj~??Y!?Jf.???l??.3?
,v9@'??(???v??emh
j?g5C??j??B??Vt?x??S?v?I?w$3D??????rSX
?	?s?J??_??CnE??B}?L
?y
?H?]???????????N??F??
> ?v??ZQ??D?ZX??
'????^^A([.??)???UL^? ??%?-?
?????n???~??
??????0????~?????u?b???I^}@M^j?
)^??????Y?????$;?N??R>
> A???m?=m'0:!???<????(F#??8?7??????-CS?/?M?S?>?+?
??=???-W???s??s???
t9??Z???x??dO?38?rGm???^??7^???????????)t??-N?'?gc??????o??
??sS??d??d?nqtY?;-?K?eX??????k??V?ce?}?j?c?????????????3;?b?h??m??I????.?
?
?
|? ??	???w?R?sWH?
?
?v?m?(????U:??????
?Q:?
|?[???????["7+?a??P, O?2?|
A??"???l.0f?y?Y?3???\?????L??\?J??????
??l>??]??????????f?Uk0?????h?:
??#?B??V?0?q\?t?W)?t???f+?U~?0?G?kJF?????3Y??y?'?U??
??{u????cT?`?SP???Z;??d8.??{???xc|?6?$VW??L4?_T?h??K?rOf
?????d??	??|?j??F?FN*M6????
?????????
v??w{?d
> endstream
> endobj
> 
> 10 0 obj
> 6200
> endobj
> 
> 11 0 obj
> << /Type /FontDescriptor
>    /FontName /BAAAAA+GillSansMT-Bold
>    /Flags 4
>    /FontBBox [ -176 -229 1165 929 ]
>    /ItalicAngle 0
>    /Ascent 929
>    /Descent -230
>    /CapHeight 929
>    /StemV 80
>    /FontFile2 9 0 R
> >>
> endobj
> 
> 12 0 obj
> << /Length 383
>    /Filter /FlateDecode >>
> stream
> x?]?Mo?@??$??=???
M?EM<?#??
?%)Y???/?/????;3;??x?a{0u??w?????T??????R?Q??q

??.?;?W6E?:????.?4sj?z?:JyC???75?T?Q???f+??9??W?s)?v??4bz??N??JNc???{-Q
???j????|H??y?D\???l+?tE)?0gq????j????#???.?u<??

????Q??? ?+???"B??@???EX?
?m??<BV?X`?r??v?ao{v?G?>
?5}
??&???L>hG?'????v4}?=?>1?>1???IX`?ai??P???3}?u@??'?\0????????????Wk?
?cp????<??k;?M?_,???endstream
> endobj
> 
> 13 0 obj
> << /Type /Font
>    /Subtype /TrueType
>    /BaseFont /BAAAAA+GillSansMT-Bold
>    /FirstChar 0
>    /LastChar 34
>    /Widths [ 1000 719 405 270 541 551 448 277
>      770 676 884 551 270 551 801 530
>      583 426 604 500 583 958 270 509
>      500 594 583 520 333 583 270 509
>      583 551 583 ]
>    /FontDescriptor 11 0 R
>    /ToUnicode 12 0 R
> >>
> endobj
> 
> 14 0 obj
> << /F1 13 0 R
>    /F2 8 0 R
>    >>
> endobj
> 
> 15 0 obj
> <<
>    /Font 14 0 R
>    /ProcSet [ /PDF ]
> >>
> endobj
> 
> 16 0 obj
> << /Type /Page
>    /Parent 3 0 R
>    /Resources 15 0 R
>    /MediaBox [ 0 0 842 595 ]
>    /Contents 1 0 R
> >>
> endobj
> 
> 3 0 obj
> << /Type /Pages
>    /Resources 15 0 R
>    /MediaBox [ 0 0 595 842 ]
>    /Kids [ 16 0 R
>            ]
>    /Count 1
> >>
> endobj
> 
> 17 0 obj
> << /Type /Catalog
>    /Pages 3 0 R
> >>
> endobj
> 
> 18 0 obj
> << /Author <FEFF004A0065006E0073002000480061006D0069007300630068>
> /Creator <FEFF0044007200610077>
> /Producer <FEFF0053007400610072004F0066006600690063006500200037>
> /CreationDate (D:20060817201019+02'00')
> >>
> endobj
> 
> xref
> 0 19
> 0000000000 65535 f
> 0000000017 00000 n
> 0000001815 00000 n
> 0000017415 00000 n
> 0000001842 00000 n
> 0000008668 00000 n
> 0000008693 00000 n
> 0000008932 00000 n
> 0000009397 00000 n
> 0000009754 00000 n
> 0000016060 00000 n
> 0000016086 00000 n
> 0000016331 00000 n
> 0000016797 00000 n
> 0000017162 00000 n
> 0000017218 00000 n
> 0000017285 00000 n
> 0000017553 00000 n
> 0000017613 00000 n
> trailer
> << /Size 19
>    /Root 17 0 R
>    /Info 18 0 R
> >>
> startxref
> 17844
> %%EOF

> Database Tables
> ===============
> 
> New tables
> ----------
>     vtiger_orgunit
> 
> 	Description:
> 	    Defines a oranizational unit
> 
> 	Columns
> 	    orgunitid		serial NOT NULL
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    type		character varying(30)
> 	    name		character varying(60) NOT NULL
> 	    address		character varying(150)
> 	    city   		character varying(100)
> 	    state  		character varying(100)
> 	    country		character varying(100)
> 	    code   		character varying(30)
> 	    phone  		character varying(30)
> 	    fax    		character varying(30)
> 	    website		character varying(100)
> 
> 	Constraints:
> 	    vtiger_orgunit_pkey
> 		PRIMARY KEY (orgunitid)
> 
> 	    fk_1_vtiger_orgunit
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_orgunit_name_idx
> 		ON vtiger_orgunit
> 		USING btree (orgid, name)
> 
> 	    vtiger_orgunit_type_idx
> 		ON vtiger_orgunit
> 		USING btree (orgid, type)
> 
> 
>     vtiger_orgunittype
> 
> 	Description:
> 	    Defines the values to be entered into vtiger_orgunit.type
> 
> 	Columns:
> 	    orgunittypeid	serial NOT NULL
> 	    orgunittype		character varying(30)
> 	    sortorderid		integer DEFAULT 0 NOT NULL
> 	    presence		integer DEFAULT 1 NOT NULL
> 
> 	Constraints:
> 	    vtiger_orgunittype_pkey
> 		PRIMARY KEY (orgunittypeid)
> 	
> 	Indices:
> 	    vtiger_orgunittype_type_idx
> 		ON vtiger_orgunittype
> 		USING btree (type)
> 
> 
>     vtiger_user2org
> 
> 	Description:
> 	    Defines a list of organizations a user may work for
> 
> 	Columns:
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    userid		integer	NOT NULL DEFAULT 0
> 	    primary		boolean DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_user2org
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_user2org
> 		FOREIGN KEY (userid)
> 		REFERENCES vtiger_users(userid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_user2org_orgid_idx
> 		ON vtiger_user2org
> 		USING btree (orgid)
> 
> 	    vtiger_user2org_userid_idx
> 		ON vtiger_user2org
> 		USING btree (userid)
> 
> 
>     vtiger_user2orgunit
> 
> 	Description:
> 	    Defines a list of organizational units a user is
> 	    assigned to
> 
> 	Columns:
> 	    orgunitid		integer	NOT NULL DEFAULT 0
> 	    userid		integer	NOT NULL DEFAULT 0
> 	    primary		boolean DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_user2orgunit
> 		FOREIGN KEY (orgunitid)
> 		REFERENCES vtiger_orgunit(orgunitid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_user2orgunit
> 		FOREIGN KEY (userid)
> 		REFERENCES vtiger_users(userid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_user2orgunit_orgid_idx
> 		ON vtiger_user2orgunit
> 		USING btree (orgunitid)
> 
> 	    vtiger_user2orgunit_userid_idx
> 		ON vtiger_user2orgunit
> 		USING btree (userid)
> 
> 
>     vtiger_entity2org
> 
> 	Description:
> 	    Assignes entities to particular organizations
> 
> 	Columns:
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    crmid		integer	NOT NULL DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_entity2org
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_entity2org
> 		FOREIGN KEY (crmid)
> 		REFERENCES vtiger_crmentity(crmid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_entity2org_crmid_idx
> 		ON vtiger_entity2org
> 		USING btree (crmid)
> 
> 	    vtiger_entity2org_userid_idx
> 		ON vtiger_entity2org
> 		USING btree (userid)
> 
> 
> Changes
> -------
>     1.  vtiger_campaing should be a vtiger_crmentity
> 	-> Add the following constraint to the database
> 
> 	    fk_r_vtiger_campaign
> 		FOREIGN KEY (campaignid)
> 		REFERENCES vtiger_crmentity(crmid)
> 		ON DELETE CASCADE
> 
> 	-> Provide a migration script for already stored campaigns
> 	
> 
> PHP changes
> ===========
> Administrators Role
> -------------------
>     1.  Settings -> Company Details
> 	- ListView
> 	- Add
> 	- Delete
> 	- Change
> 
>     2.  Settings -> Users
> 	- User is a member of one or more companies
> 	  (implement like the group membership assignement)
> 	- Assign one main company to the user (out of the 
> 	  membership list).
> 
> CEO Role
> --------
>     1.  Settings -> Company Details
> 	- Change deatils only for the companies, the user has a 
> 	  CEO role for
> 
>     2.  Settings -> Company Unit
> 	- ListView
> 	- Add
> 	- Delete
> 	- Change
> 	
>     3.  Settings -> Users
> 	- User is a member of one or more organization units
> 	  (take care to provide only those units of organizations/
> 	   companies to which the user already is assigned).
> 	- Assign one main orgunit to the user (out of the 
> 	  membership list).
> 
> Standard user role
> ------------------
>     1.  login scheme
> 	After the login the authenticated user gets another 
> 	window which lets him select the organization/company
> 	he's going to act for in the new session.
> 
> 	Open item: Skip this second login step if there's only
> 	one organization assigned to that user?
> 
> 	My proposal:
> 	    For the time being: yes. 
> 	    This would be subject of further FCRs (like book-
> 	    keeping - booking date selection on login).
> 
> 	Open item: Display the organization selection somewhere
> 	during the entire session?
> 
> 	My proposal: yes, upper right corner with the user name
> 
>     2.  Assignment of entities to exactly one company/organization
> 	This affects:
> 	- Quotes
> 	- Sales orders
> 	- Invoices
> 	- Price Books
> 	The company assignement is taken from the selection, the
> 	user did during login.
> 
>     3.  Assignment of entities to more than one company/organization
> 	This affects
> 	- Leads
> 	- Accounts
> 	- Contacts
> 	- Potentials
> 	- Products
> 	- Campaigns
> 	To the modification/add forms another list entity is to
> 	be added. This list fills the crmentity2org table. Users
> 	may add/delete entries to/from this table.
> 
> 	Open item: May this table be empty?
> 
>     4.  Assignment of entities to orgunits
> 	This affects:
> 	- Quotes
> 	- Sales orders
> 	- Invoices
> 	- Price Books
> 	The company assignement is taken from the selection, the
> 	user did during login.
> 
>     5.  PDF generation
> 	Addresses to be takenout of the organization table according
> 	to the organization reference of the affected entity.
> 	Addresses may be overridden by orgunit references.
> 
> General
> -------
>     1.  The role assignments shown above results in permissions
> 	to be maintained.
> 
>     2.  Do we use the term 'company' as in the GUI or 'organization'
> 	as in the database? (No preferences from my side ... only
> 	that there should be a common understanding).
> 
>     3.  Should there be a more sophisticated relationship between
> 	entities and organizations (also orgunits)? May like
> 
> 	    If a product is assigned to company A and B:
> 	    May both companies change product details or should
> 	    there still be an ownership assigned to one of the
> 	    companies?
> 
> 	This could be done using flags in the entity2org table
> 	but would result in more sophisticated GUI operations.

> _______________________________________________
> Get started with creating presentations online - http://zohoshow.com?vt 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      




From jeri at vtiger.com  Wed Nov 15 07:24:21 2006
From: jeri at vtiger.com (Jeri John)
Date: Wed, 15 Nov 2006 17:54:21 +0530
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
Message-ID: <10eeb932d91.-1068791366129115790.2050524429825132071@@vtiger.com>

Dear James, 
 Thanks for your fix.We have integrated it and it is available in the SVN. 
 
Thanks & Regards, 
Jerry.




---- James Tillman&lt;jamestillman at sevatechnologies.com&gt; wrote ---- 

 ((If someone would fix the forums registration, I'll gladly start posting these issues on the forums if this is not the correct venue.&nbsp; Until then, I assume reporting in some way is better than not reporting at all.)) &nbsp; modules/Emails/Emails.php seems to be lacking some key class-level fields.&nbsp; Namely, these: &nbsp; var $rel_users_table = "vtiger_salesmanactivityrel";var $rel_contacts_table = "vtiger_cntactivityrel";var $rel_serel_table = "vtiger_seactivityrel"; It makes use of these fields in its code, as in the function set_emails_contact_invitee_relationship(), but they are not set anywhere in the class. &nbsp; This problem comes to light when you attempt to use the Outlook plugin to link emails to a vtiger contact.&nbsp; You get the typical "Invalid return value from vtigerCRM" error message. &nbsp; I inserted the lines mentioned above at line 38 in Emails.php and Outlook email linking started to work. &nbsp; Most of the Outlook interaction with vtiger in&nbsp;v502&nbsp;seems to be sadly broken out of the box. &nbsp; By the way, anyone thought of improving the Outlook plugin to do something other than stupidly report that vtiger returned an invalid response?&nbsp; Having to use Fiddler or some other HTTP inspection utility to just to find the PHP error message from vtiger is time-consuming. &nbsp; jpt _______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061115/5a0a92eb/attachment-0003.html 

From philip at vtiger.com  Thu Nov 16 10:30:25 2006
From: philip at vtiger.com (Philip)
Date: Thu, 16 Nov 2006 21:00:25 +0530
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
 and general column layout
In-Reply-To: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
References: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
Message-ID: <10ef163e45a.3319490668445686029.-7775633052489133351@@vtiger.com>


Hi Niel,

Thanks for your effort in resolving the UI issue we'll test your filesin out test bed and check-in into the 5.0.3 repo if everything is fine,else we'll get back to you if we face any issue.

Regards,
Philip



---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au> wrote ---- 

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061116/92aed265/attachment-0003.html 

From dgrant at accuratetechnologies.com  Thu Nov 16 10:41:34 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Thu, 16 Nov 2006 10:41:34 -0500
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
	and general column layout
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.com>

I actually "solved" this problem a different way:

 

I have now explicitly wordwrapped all multi-line textareas to 80 chars,
both with WRAP=HARD and with a counting/wrapping function on the backend
(AJAX doesn't seem to support WRAP=HARD)

 

This way, the text entered in the textarea and the text returned from
the database wrap the same - what you see is how it is stored.

 

It's a lot simpler, and it works with AJAX.

 

DG 

 

  _____  

From: Philip [mailto:philip at vtiger.com] 
Sent: Thursday, November 16, 2006 10:30 AM
To: vtigercrm-developers at lists.vtigercrm.com
Cc: vtigercrm-developers at lists.vtigercrm.com
Subject: Re: [Vtigercrm-developers] Files to fix word wrapping of long
items and general column layout

 


Hi Niel,

Thanks for your effort in resolving the UI issue we'll test your files
in out test bed and check-in into the 5.0.3 repo if everything is fine,
else we'll get back to you if we face any issue.

Regards,
Philip



---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au>
wrote ---- 

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems
do
not wrap correctly and resizing the browser window doesn't help. See
ticket my #2564 and others. I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well;
wrapping
correctly when the user chooses to alter the width of his or her browser
window. In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's
and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo". Both of these now have a width
setting
that you can play with. You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected
because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in
lots
of places such as Change Password and Data Migration. This means that
I've
ended up tweaking (and fixing some bugs in) lots of tables. Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views". A Detail View shows the details for one item,
e.g.
a Contact, a Quote etc. Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory
tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting. These
now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View)
such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of
course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of
a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***. I've only
giving
you a new style.css for Blue Lagoon (any other theme will look a mess
with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you
can!

4) Now resize your browser window and check that everything wraps
neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css. This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these
files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been
used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View. This is causing confusion. For example there are multiple
styles defining the same heading of different tables both using Detail
View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having
four
columns: Label, Data, Label, Data. The headings for many different types
of tables are substantially identical. Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell
level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align". The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout. Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored
with
the link information for the image. Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells. In the
past
they used to be required to ensure a cell would display properly. If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left
aligned),
e.g. <td>{$data}&nbsp;</td> NOT <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of
these
changes. I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful. I spent a reasonable time
reformatting. (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061116/84365744/attachment-0003.html 

From neil.temperley at exemail.com.au  Thu Nov 16 18:59:38 2006
From: neil.temperley at exemail.com.au (neil.temperley at exemail.com.au)
Date: Fri, 17 Nov 2006 10:59:38 +1100 (EST)
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
 and general column layout
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.co
	m>
References: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.com>
Message-ID: <4257.203.143.170.20.1163721578.squirrel@webmail.exetel.com.au>

Hi Dennis,

Basically what I did was reduce the number of hard wired overrides to the
default style to a minimum and I also eliminated nowraps.  A nowrap on one
cell will often affect a whole column.

Since a 4 column "Detail View" is a standard table layout, I was able to
move the column width info into style.css.  This gives a knowledgable user
nice control over the relative column widths of a "Detail View" by
tweaking column width settings.

But the biggest gain is that all columns resize correctly to the window
width of the user's browser.  This is really nice.  Any user can resize
the window to suit their preference and the columns self adjust and wrap
accordingly.

Since the browser does the wrapping work it works with AJAX (and
multibyte) without additional coding.

Finally I was able to maximise the space for Notes and Descriptions etc by
getting them to span the full row.


BTW, several months back I helped implement code to force a wrap of
Multi-select combo box lists in Smarty, but this (as you know) required a
matching JavaScript fix for AJAX as well.  I always felt this was a
kludge; a hardwired column width that ignores the users browser window
should be avoided if possible.  With the new files I removed the 'kludge'.

regards,
Neil

> I actually "solved" this problem a different way:
>
>
>
> I have now explicitly wordwrapped all multi-line textareas to 80 chars,
> both with WRAP=HARD and with a counting/wrapping function on the backend
> (AJAX doesn't seem to support WRAP=HARD)
>
>
>
> This way, the text entered in the textarea and the text returned from
> the database wrap the same - what you see is how it is stored.
>
>
>
> It's a lot simpler, and it works with AJAX.
>
>
>
> DG
>
>
>
>   _____
>
> From: Philip [mailto:philip at vtiger.com]
> Sent: Thursday, November 16, 2006 10:30 AM
> To: vtigercrm-developers at lists.vtigercrm.com
> Cc: vtigercrm-developers at lists.vtigercrm.com
> Subject: Re: [Vtigercrm-developers] Files to fix word wrapping of long
> items and general column layout
>
>
>
>
> Hi Niel,
>
> Thanks for your effort in resolving the UI issue we'll test your files
> in out test bed and check-in into the 5.0.3 repo if everything is fine,
> else we'll get back to you if we face any issue.
>
> Regards,
> Philip
>
>
>
> ---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au>
> wrote ----
>
> Dear vtiger developers,
>
> please find attached a gzipped tar file of changes I'm suggesting to the
> vtiger user interface to cope with the problem that long item problems
> do
> not wrap correctly and resizing the browser window doesn't help. See
> ticket my #2564 and others. I've made these corrections to SVN 9765.
>
> In particular my aim was to make all "Detail Views" format well;
> wrapping
> correctly when the user chooses to alter the width of his or her browser
> window. In particular I wanted to ensure that fields such as Comments,
> Notes, Description, Terms & Conditions, Mailing Street and Multi-select
> Combo Boxes worked correctly with long items regardless of window width.
> Also, I've ensured that these wide items (including Contact Image (i.e.
> Photo)) now span multiple columns to provide a neater layout.
>
> With these changes, the user has significant control over column width's
> and
> layout in Detail Views by altering the two classes in the style.css file
> ".dvtCellLabel" and ".dvtCellInfo". Both of these now have a width
> setting
> that you can play with. You can choose values that give you column
> proportions pretty similar to vtiger's existing proportions, or you can
> choose values that enable more data to be fitted to the screen.
>
> Unfortunately, to implement these changes many files were affected
> because
> these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in
> lots
> of places such as Change Password and Data Migration. This means that
> I've
> ended up tweaking (and fixing some bugs in) lots of tables. Where
> reasonable I've tried to replace the use of these with the more generic
> .cellLabel and .cellInfo.
>
> Some of the "tables" affected are as follows.
>
> 1) All "Detail Views". A Detail View shows the details for one item,
> e.g.
> a Contact, a Quote etc. Detail Views are found in Contacts, Leads,
> Potentials, Accounts, Notes, User and all the items under the Inventory
> tab,
> e.g. Quotes and Invoices.
>
> 2) The Advance Filter tables used in Custom View and Reporting. These
> now
> resize well and can accept long "OR" combinations of search strings.
>
> 3) Odd places (which in my mind do not really constitute a Detail View)
> such
> as Change Password, Convert Lead, Calendar and Data Migration.
>
> Files most affected are:
> DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of
> course.
>
>
> How to proceed.
>
> 1) Untar the archive files into your vtigercrm root directory on top of
> a
> SVN 9765 version.
>
> 2) Log-on to vtiger using the *** Blue Lagoon Theme ***. I've only
> giving
> you a new style.css for Blue Lagoon (any other theme will look a mess
> with
> no word wrapping)!!!!
>
> 3) Edit a Contact and create lots of long entries in every field you
> can!
>
> 4) Now resize your browser window and check that everything wraps
> neatly.
>
> 5) If you want to play with the layout: in themes, open
> bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
> For experts, you may want to copy bluelagoon/style-developer.css to
> bluelagoon/style.css. This will give you a fairly ugly colour scheme but
> will clearly show the places that have been affected by my changes.
>
> 6) Note I reformatted the indentation of portions of the code in these
> files
> where I thought indentation was poor or hard to follow.
>
>
> Some of the things that I have learnt through this process.
>
> 1) There are multiple style classes used in vtiger and some have been
> used
> inconsistently.
> One problem is that there is no clear definition of what constitutes a
> Detail View. This is causing confusion. For example there are multiple
> styles defining the same heading of different tables both using Detail
> View
> style classes, e.g. .detailedViewHeader and .dvInnerHeader.
>
> I'd like to suggest that we restrict Detail View tables to those having
> four
> columns: Label, Data, Label, Data. The headings for many different types
> of tables are substantially identical. Rather than create new style for
> every situation or table, it is probably best to minimise the number of
> styles and use generic names such as .headingLevel2 or .selectBox where
> possible.
>
> 2) Note that HTML statements such as <table class='small'> or <tr
> class='small'> don't seem to propagate the font style down to cell
> level.
> I'm not sure why not.
>
> 3) Note also that an HTML statement like:
> <td align="left" class="txtBox">
> may not do what you want since the class setting always takes precedence
> over the "align". The better choice is this
> <td style="text-align:left;" class="txtBox">
> which will always work.
>
> 4) One nowrap type item in a table cell can turn off wrapping for the
> **whole column** of data and ruin the layout. Avoid using nowrap!
>
> 5) I couldn't resize images since the HTML sizing seems to be stored
> with
> the link information for the image. Photos are too large by default.
>
> 6) I don't think &nbsp; codes are required in empty data cells. In the
> past
> they used to be required to ensure a cell would display properly. If you
> need to include one, put it **after** the data not in front so that the
> alignment of the data is not disturbed (assuming the data is left
> aligned),
> e.g. <td>{$data}&nbsp;</td> NOT <td>&nbsp;{$data}</td>.
>
>
> Please let me know if you find any formatting disasters as a result of
> these
> changes. I've tried this with Firefox 1.5 and IE 6.0.
>
> I tried hard to be neat and careful. I spent a reasonable time
> reformatting. (Yes, I spent way way too long on this :-))
>
> Best regards,
> Neil
>
> Neil Temperley
> Skype: neil.temperley
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com




From Dirk.Gorny at genion.de  Fri Nov 17 04:48:57 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Fri, 17 Nov 2006 10:48:57 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
Message-ID: <200611171048.58005.Dirk.Gorny@genion.de>

Am Montag, 6. November 2006 17:57 schrieb Dhr. R.R. Gerbrands:

> @Dirk, could you give us your idea's on more specific improvements,
> compared with openCRX?

For sure, at first it is supports high class DBMS like DB2, Oracle, and 
MS-SQL.
- openCRX is a completely i18n application with many supportet languages. 
English, German, Spanisch, Chinese, French, Polish , Portuguese, Russian, 
Swedish, Turkish, and Farsi are included.
- For integration it supports RMI, CORBA, JMS, JCA.
- You need only one deployment and one set of tables to manage a hundred of 
different mandators.
- there is the possibility to export and import complex objects with their 
substructure in XML.
-You can sync Offline/Mobile Client and Server.

These are only a few things. The most you can see at 
http://www.opencrx.org/tour-features.htm.

Depending on the architecture (J2EE, OMG/MDA) they work with a core team 
consists of 3 people.

Best regards,

Dirk


From naterajj at hotmail.com  Mon Nov 20 14:00:47 2006
From: naterajj at hotmail.com (Juan Natera)
Date: Mon, 20 Nov 2006 11:00:47 -0800
Subject: [Vtigercrm-developers] Adding another asigned user's field to the
	Lead's Module
Message-ID: <BAY116-F30A4A860B57C70A6348D96C2ED0@phx.gbl>

Hi,

I need to have 2 users assigned per Lead, I was looking for recomendations 
on how to do this, Adding a regular custom field with users from the 
settings page won't acomplish what we want, since we need the 
notifications/reports and such to affect both users.

Thanks in advance,

Juan Natera

_________________________________________________________________
Get the latest Windows Live Messenger 8.1 Beta version.?Join now. 
http://ideas.live.com



From joe at tsolucio.com  Mon Nov 20 14:25:28 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Mon, 20 Nov 2006 20:25:28 +0100
Subject: [Vtigercrm-developers] Is the list active?
Message-ID: <1164050728.2936.34.camel@joesunix.int>

Hi,

For some time now there is very little activity on this list. The last
4/5 emails I have sent haven't been answered, fixed or commented on.

The ones I would like to know about are:

-> vtiger popup calendar start day of the week
-> new vtiger_entityname table
-> Latest news section in vtigerforge isn't updating
-> DMS

Is there another place where we should ask these questions?

Regards, Joe
TSolucio



From neil.temperley at exemail.com.au  Mon Nov 20 17:27:02 2006
From: neil.temperley at exemail.com.au (Neil Temperley)
Date: Tue, 21 Nov 2006 09:27:02 +1100
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
	andgeneral column layout
In-Reply-To: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
Message-ID: <000001c70cf3$02f2eed0$6501a8c0@Nemrut>

Dear All,

This archive has some minor fixes to two files in the version I sent
previously.  Additional altered files fix a layout issue for "Edit" and
"Create" views... now the spacing/layout of the copy address radio buttons
is improved.  (As far as I can tell these files can be dropped on top of SVN
9848 and everything works OK.)

Regards,
Neil

-----Original Message-----
From: vtigercrm-developers-bounces at lists.vtigercrm.com
[mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf Of Neil
Temperley
Sent: Monday, 13 November 2006 21:27
To: vtigercrm-developers at lists.vtigercrm.com
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
andgeneral column layout

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox">
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this <td style="text-align:left;"
class="txtBox"> which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.14.3/530 - Release Date: 11/11/06
18:53
 
    
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtiger-Neil-20061121.tar.gz
Type: application/x-gzip
Size: 85673 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/e18da66b/attachment-0002.gz 

From g.un at freemail.hu  Mon Nov 20 18:14:30 2006
From: g.un at freemail.hu (mikozod hozza)
Date: Tue, 21 Nov 2006 00:14:30 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
Message-ID: <freemail.20061021001430.78055@fm13.freemail.hu>

Hello,

 I would need help why the example at
http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
does not work for me.
I have installed vTiger 5.2.0 on Linux box.
I put this query:
"insert into vtiger_field values( 4, '',
'event_time','vtiger_login_hist', 2, 5, 'event_time',
'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
vtiger_login_hist is my prop table., event_time is one of
its field.
Then I got some error when visiting a certain Contact:
"Fatal error: Call to a member function Move() on a
non-object in
/var/www/vtigercrm/include/database/PearDatabase.php "
This error comes from query_result function.
When I switched on debugging info it was seen that result
parameter received here was empty.
Actually I don't know what I made wrong.
The whole purpose of my experiment would be to have a
proprietary field on Contacts/More information.
I hope some one can help me here.

br,

Gabor

______________________________________________________________________
KGFB-2007 az Els? Online Alkuszt?l! K?sse n?lunk ?jra k?telez? biztos?t?s?t! 
Az ?sszes biztos?t? egy helyen, Online kedvezm?nyek, egyszer? ?gymenet.
http://www.netrisk.hu





From dan.means at teamsrs.com  Mon Nov 20 21:45:07 2006
From: dan.means at teamsrs.com (Dan Means)
Date: Mon, 20 Nov 2006 18:45:07 -0800
Subject: [Vtigercrm-developers] Is the list active?
In-Reply-To: <1164050728.2936.34.camel@joesunix.int>
References: <1164050728.2936.34.camel@joesunix.int>
Message-ID: <45626833.2030901@teamsrs.com>

I think everybody's just exhausted and busy...

Joe Bordes wrote:

>Hi,
>
>For some time now there is very little activity on this list. The last
>4/5 emails I have sent haven't been answered, fixed or commented on.
>
>The ones I would like to know about are:
>
>-> vtiger popup calendar start day of the week
>-> new vtiger_entityname table
>-> Latest news section in vtigerforge isn't updating
>-> DMS
>
>Is there another place where we should ask these questions?
>
>Regards, Joe
>TSolucio
>
>_______________________________________________
>Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
>  
>

-- 
Dan Means
Mission Viejo, CA
www.dkmeansonline.com
www.teamsrs.com



From joe at tsolucio.com  Tue Nov 21 04:08:59 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 10:08:59 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021001430.78055@fm13.freemail.hu>
References: <freemail.20061021001430.78055@fm13.freemail.hu>
Message-ID: <1164100139.10220.3.camel@joesunix.int>

The second value of your insert is an empty string. It should be a
numeric value obtained from the function getUniqueID("vtiger_field").


El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> Hello,
> 
>  I would need help why the example at
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> does not work for me.
> I have installed vTiger 5.2.0 on Linux box.
> I put this query:
> "insert into vtiger_field values( 4, '',
> 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> vtiger_login_hist is my prop table., event_time is one of
> its field.
> Then I got some error when visiting a certain Contact:
> "Fatal error: Call to a member function Move() on a
> non-object in
> /var/www/vtigercrm/include/database/PearDatabase.php "
> This error comes from query_result function.
> When I switched on debugging info it was seen that result
> parameter received here was empty.
> Actually I don't know what I made wrong.
> The whole purpose of my experiment would be to have a
> proprietary field on Contacts/More information.
> I hope some one can help me here.
> 
> br,
> 
> Gabor
> 
> ______________________________________________________________________
> KGFB-2007 az Els? Online Alkuszt?l! K?sse n?lunk ?jra k?telez? biztos?t?s?t! 
> Az ?sszes biztos?t? egy helyen, Online kedvezm?nyek, egyszer? ?gymenet.
> http://www.netrisk.hu
> 
> 
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 



From joe at tsolucio.com  Tue Nov 21 04:10:14 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 10:10:14 +0100
Subject: [Vtigercrm-developers] Is the list active?
In-Reply-To: <45626833.2030901@teamsrs.com>
References: <1164050728.2936.34.camel@joesunix.int>
	<45626833.2030901@teamsrs.com>
Message-ID: <1164100214.10220.4.camel@joesunix.int>

Ok, that's normal. At least I know I am on the right list :-)

Thanks, Joe
El lun, 20-11-2006 a las 18:45 -0800, Dan Means escribi?:
> I think everybody's just exhausted and busy...
> 
> Joe Bordes wrote:
> 
> >Hi,
> >
> >For some time now there is very little activity on this list. The last
> >4/5 emails I have sent haven't been answered, fixed or commented on.
> >
> >The ones I would like to know about are:
> >
> >-> vtiger popup calendar start day of the week
> >-> new vtiger_entityname table
> >-> Latest news section in vtigerforge isn't updating
> >-> DMS
> >
> >Is there another place where we should ask these questions?
> >
> >Regards, Joe
> >TSolucio
> >
> >_______________________________________________
> >Reach hundreds of potential candidates - http://jobs.vtiger.com 
> >
> >  
> >
> 



From alex.svetos at gmail.com  Tue Nov 21 04:41:56 2006
From: alex.svetos at gmail.com (alex svetos)
Date: Tue, 21 Nov 2006 10:41:56 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021001430.78055@fm13.freemail.hu>
References: <freemail.20061021001430.78055@fm13.freemail.hu>
Message-ID: <26debbf70611210141u4d62a48fw1a3c5f9ac3e75e68@mail.gmail.com>

> Hello,
>
> I would need help why the example at
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> does not work for me.
> I have installed vTiger 5.2.0 on Linux box.
> I put this query:
> "insert into vtiger_field values( 4, '',
> 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> vtiger_login_hist is my prop table., event_time is one of
> its field.
> Then I got some error when visiting a certain Contact:
> "Fatal error: Call to a member function Move() on a
> non-object in
> /var/www/vtigercrm/include/database/PearDatabase.php "
> This error comes from query_result function.
> When I switched on debugging info it was seen that result
> parameter received here was empty.
> Actually I don't know what I made wrong.
> The whole purpose of my experiment would be to have a
> proprietary field on Contacts/More information.
> I hope some one can help me here.
>
> br,
>
> Gabor


Hi,

I don't understand what you want to do. But if you want to add a new field
in a Contact you should do something like this :
if you want to add a new field on Contact, assuming your field ids called
'card_number' you should insert a new line in vtiger field with thoses
values :

insert into a vtiger_contact values (4, an_unused_field_id, 'card_number',
'card_number',
'vtiger_contactdetails',1,7,'card_number','card_number',1,0,0,15,0,4,1,'I~O',1,NULL,'ADV'
)

And add a the new column in vtiger_contactdetails.

(assuming your new field is called 'mobile_phone' and is used to store a
phone number.)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/a5221807/attachment-0003.html 

From sergiokessler at gmail.com  Tue Nov 21 07:54:56 2006
From: sergiokessler at gmail.com (Sergio A. Kessler)
Date: Tue, 21 Nov 2006 09:54:56 -0300
Subject: [Vtigercrm-developers] separation in calendar
Message-ID: <49216030611210454q7739413cs7bccead9f47e0098@mail.gmail.com>

in the calendar screen there is a visual separation between events of types:

Call & Meetings (left tab)
To Dos (right tab)

but the button "Add" permit to add any type of event (Call, Meeting or
ToDo event)...

why there is two tabs ?

would'n it be better if the daily, weekly views show the three events
types without any tabs ??


salute,
/sergio


From g.un at freemail.hu  Tue Nov 21 09:19:02 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 15:19:02 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164100139.10220.3.camel@joesunix.int>
Message-ID: <freemail.20061021151902.54391@fm10.freemail.hu>

hi

> The second value of your insert is an empty string. It
should be a
> numeric value obtained from the function
getUniqueID("vtiger_field").
Actually it is enough if you issue this query in mysql. I
have used this query in mysql and it always assigns a unique
value there.

> 

> 
> El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> > Hello,
> > 
> >  I would need help why the example at
> >
http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> > does not work for me.
> > I have installed vTiger 5.2.0 on Linux box.
> > I put this query:
> > "insert into vtiger_field values( 4, '',
> > 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> > 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> > vtiger_login_hist is my prop table., event_time is one of
> > its field.


___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From g.un at freemail.hu  Tue Nov 21 09:25:58 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 15:25:58 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <26debbf70611210141u4d62a48fw1a3c5f9ac3e75e68@mail.gmail.com>
Message-ID: <freemail.20061021152558.6346@fm10.freemail.hu>



alex svetos <alex.svetos at gmail.com> ?rta:

> I don't understand what you want to do. But if you want to
add a new field

Actually I have defined a new table in vtiger database
(vtiger_login_hist). I wan to make the certain contact's
last login time to be displayed on Contacts/More Information
tab.
Technically I don't know for 100% sure how this should be
achieved. This is why I bother you here on this list:)
I have made some attempt based on online documentation on
vtiger page but those were failed. And I don't know where to
start to looking for my fault.  

> in a Contact you should do something like this :
> if you want to add a new field on Contact, assuming your
field ids called
> 'card_number' you should insert a new line in vtiger field
with thoses
> values :
> 
> insert into a vtiger_contact values (4,
an_unused_field_id, 'card_number',
> 'card_number',
>
'vtiger_contactdetails',1,7,'card_number','card_number',1,0,0,15,0,4,1,'I~O',1,NULL,'ADV'
> )
> 
> And add a the new column in vtiger_contactdetails.
> 
> (assuming your new field is called 'mobile_phone' and is
used to store a
> phone number.)
> 
Did I get it right that I have to update three tables in
database for this case? These table are: vtiger_field,
vtiger_contact and vtiger_contactdetails, aren't they?

thanks for help so far!

Gabor

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From joe at tsolucio.com  Tue Nov 21 09:56:24 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 15:56:24 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021151902.54391@fm10.freemail.hu>
References: <freemail.20061021151902.54391@fm10.freemail.hu>
Message-ID: <1164120984.10220.52.camel@joesunix.int>

HI,

El mar, 21-11-2006 a las 15:19 +0100, gabor escribi?:
> hi
> 
> > The second value of your insert is an empty string. It
> should be a
> > numeric value obtained from the function
> getUniqueID("vtiger_field").
> Actually it is enough if you issue this query in mysql. I
> have used this query in mysql and it always assigns a unique
> value there.

Yes, this is because the field is defined as an auto-increment. The
problem is that this procedure does NOT update the value in
vtiger_field_seq so any new module or maybe some patches are going to
get into trouble with overwritten field values. It's OK if your sure you
are never going to add anything somebody else has done.

The correct way to do this is launch the SQL insert and then modify the
value in vtiger_field_seq accordingly.

Joe
TSolucio
> 
> > 
> 
> > 
> > El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> > > Hello,
> > > 
> > >  I would need help why the example at
> > >
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> > > does not work for me.
> > > I have installed vTiger 5.2.0 on Linux box.
> > > I put this query:
> > > "insert into vtiger_field values( 4, '',
> > > 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> > > 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> > > vtiger_login_hist is my prop table., event_time is one of
> > > its field.
> 
> 
> ___________________________________________________________
> A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
> http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm
> 
> 
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 



From oded at atelis.net  Tue Nov 21 10:24:22 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 17:24:22 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <1164122662.13078.56.camel@x-23.atelis.net>


Hi all.

I'm evaluating vTiger CRM for my company, and there are several issues
where either I don't understand how to do things using vTiger CRM or
vTiger CRM is missing important functionality (important to my company ,
anyway ;-).

If its ok, I'd like to raise these issues here - not all at once, of
course - and get some feedback, and possibly solutions to these.

I'll start with the first question then:
We've developed an in-house inventory management application to manager
our sales of hardware products - we are resellers for a company that
manufactures extension cards for PCs. Each such card has a name, model
number and a serial number, where the serial number in unique for each
item - not product.

In our own inventory application, there is a "product" entity which has
a model number, and each product has several serial number assigned to
it. Due to commercial issues with out supplier (tracking eligability of
customers for support) , we need to track each item that is shipped,
using the serial number. Whenever we receive a delivery, we go over the
boxed and add the serial number of every item under the product entity
for that type of product. When we sell a product, we remove the item
serial number from the inventory.

We are not trying to use vTiger CRM to track inventory instead, but
apparently in vTiger CRM, the product entity carries the serial number,
so each product can have only one serial number available in the
inventory. This forces us to either register each boxed item we receive
as a product or ignore the serial numbers. We can't do the latter, and
the former is problematic due to several reasons:
- Creating a product entry is complicated and time consuming - creating
500 product entries for a shipment of 500 boards takes considerably more
time then recording 500 serial numbers somewhere.
- Product views (such as "Search for product" in the invoice editor)
rarely list the serial number, so you basically get a list containing
several dozens (sometimes hundreds, depending on the item) of similar
entries and one has to guess which carries the correct serial number.
- Inventory reports listing item quantity become completely useless.

Is there a way to do what we need that I wasn't aware of ?

Thanks.

--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
Nobody takes a bribe.  Of course at Christmas if you happen to hold out
your hat and somebody happens to put a little something in it, well,
that's different.
    -- New York City Police Commissioner (Ret.) William P. O'Brien,
instructions to the force.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/062e9236/attachment-0003.html 

From dgrant at accuratetechnologies.com  Tue Nov 21 10:37:31 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 21 Nov 2006 10:37:31 -0500
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>

 

 

  _____  

From: Oded Arbel [mailto:oded at atelis.net] 
Sent: Tuesday, November 21, 2006 10:24 AM
To: vtigercrm-developers at lists.vtigercrm.com
Subject: [Vtigercrm-developers] Question about the inventory mechanism

 


Hi all.

I'm evaluating vTiger CRM for my company, and there are several issues
where either I don't understand how to do things using vTiger CRM or
vTiger CRM is missing important functionality (important to my company ,
anyway ;-).

We wrote a back-end process to update the CRM with information out of
our inventory system, including stock info, etc.

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/d414d269/attachment-0003.html 

From oded at atelis.net  Tue Nov 21 10:52:42 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 17:52:42 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
Message-ID: <1164124362.13078.61.camel@x-23.atelis.net>

On Tue, 2006-11-21 at 10:37 -0500, Dennis Grant wrote:
> 
> We wrote a back-end process to update the CRM with information out of
> our inventory system, including stock info, etc.


But how did you solve the serial number issue with the CRM inventory
mechanism ? 
I can probably sync our local inventory system to vTiger CRM, but if the
vTiger CRM inventory reports will not be useful, and its not easy to use
the inventory information in other entities (such as sales and
invoices), then its kind of useless to me - we can just as easily
continue to use our inventory system w/o integration and scribble serial
numbers by hand on the invoices.

--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
You know what I did before I married?
Anything I wanted to.
    -- Henny Youngman

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/d95f406f/attachment-0003.html 

From dgrant at accuratetechnologies.com  Tue Nov 21 11:01:17 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 21 Nov 2006 11:01:17 -0500
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>

 

 


But how did you solve the serial number issue with the CRM inventory
mechanism ? 

 

We didn't - no need, as we don't track serial numbers like you do.

 

But the concept of coding back-end connectors to do your data entry is
valid.

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/5e68f763/attachment-0003.html 

From oded at atelis.net  Tue Nov 21 11:24:45 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 18:24:45 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>
Message-ID: <1164126285.13078.65.camel@x-23.atelis.net>

On Tue, 2006-11-21 at 11:01 -0500, Dennis Grant wrote:
>  
> 
>  
> 
> 
> But how did you solve the serial number issue with the CRM inventory
> mechanism ? 
> 
>  
> 
> We didn?t ? no need, as we don?t track serial numbers like you do.
> 
>  
> 
> But the concept of coding back-end connectors to do your data entry is
> valid.


It is, and I will do that if I can figure out a way to map the entities
I need to what the CRM provides.


--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
In an essay about programming, Ellen Ullman tells a great anecdote about
a programmer who was so socially inept that they could only communicate
with him via email, even they all shared the same office. She also
writes: "Pretty graphical interfaces are commonly called user-friendly.
But they are not really your friends. Underlying every user-friendly
interface is terrific contempt for the humans who will use it. ...to
build a crash-proof system, the designer must be able to imagine--and
disallow--the dumbest action possible. He or she has to think of every
single stupid thing a human being could do. Gradually, over months and
years, the designer's mind creates a construct of the user as an
imbecile. This image is necessary. No crash-proof system can be built
unless it is made for an idiot." 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/a90fbeab/attachment-0003.html 

From dan.means at teamsrs.com  Tue Nov 21 11:26:57 2006
From: dan.means at teamsrs.com (Dan Means)
Date: Tue, 21 Nov 2006 08:26:57 -0800
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <1164124362.13078.61.camel@x-23.atelis.net>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
	<1164124362.13078.61.camel@x-23.atelis.net>
Message-ID: <456328D1.9070002@teamsrs.com>

An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/2d9213c2/attachment-0003.html 

From g.un at freemail.hu  Tue Nov 21 15:15:43 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 21:15:43 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164120984.10220.52.camel@joesunix.int>
Message-ID: <freemail.20061021211543.19078@fm08.freemail.hu>


> > Actually it is enough if you issue this query in mysql. I
> > have used this query in mysql and it always assigns a unique
> > value there.
> 
> Yes, this is because the field is defined as an
auto-increment. The
> problem is that this procedure does NOT update the value in
> vtiger_field_seq so any new module or maybe some patches
are going to
> get into trouble with overwritten field values. It's OK if
your sure you
> are never going to add anything somebody else has done.
> 
> The correct way to do this is launch the SQL insert and
then modify the
> value in vtiger_field_seq accordingly.
So, for what purpose this vtiger_field table is there? I
have a custom field in contacts (besides my problem
described earlier) and this vtiger_field table is really empty

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From g.un at freemail.hu  Tue Nov 21 15:15:43 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 21:15:43 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164120984.10220.52.camel@joesunix.int>
Message-ID: <freemail.20061021211543.19078@fm08.freemail.hu>


> > Actually it is enough if you issue this query in mysql. I
> > have used this query in mysql and it always assigns a unique
> > value there.
> 
> Yes, this is because the field is defined as an
auto-increment. The
> problem is that this procedure does NOT update the value in
> vtiger_field_seq so any new module or maybe some patches
are going to
> get into trouble with overwritten field values. It's OK if
your sure you
> are never going to add anything somebody else has done.
> 
> The correct way to do this is launch the SQL insert and
then modify the
> value in vtiger_field_seq accordingly.
So, for what purpose this vtiger_field table is there? I
have a custom field in contacts (besides my problem
described earlier) and this vtiger_field table is really empty

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From philip at vtiger.com  Fri Nov 24 03:04:46 2006
From: philip at vtiger.com (Philip)
Date: Fri, 24 Nov 2006 13:34:46 +0530
Subject: [Vtigercrm-developers] Status update on vtiger CRM 5.0.3
Message-ID: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>

Team,

Iam very happy to inform you all we have crossed half way mark inversion 5.0.3 development.  As of today we have fixed about 60+issues and updated the bleeding-edge demo @ 

http://en.vtiger.com/wip/index.php

Trac status:

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/query?status=closed&group=owner&milestone=5.0.3&order=priority.


Based on the community feedback on quality of the product we areplanning to update the trac status on daily basis so that we canindentify any issues well in advance and avoid last minute glitches.This will also help us making the release hassle free.

We are looking forward for your help in validating the clossed issues.If there are any breakages kindly drop a mail to philip at vtiger.com sothat i can update the ticket status in trac. 

Regards,
Philip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061124/8c8a53f2/attachment-0003.html 

From jens at Strawberry.COM  Fri Nov 24 03:38:55 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Fri, 24 Nov 2006 09:38:55 +0100
Subject: [Vtigercrm-developers] Status update on vtiger CRM 5.0.3
In-Reply-To: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>;
	from Philip on Fri, Nov 24, 2006 at 01:34:46PM +0530
References: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>
Message-ID: <20061124093855.B779@Strawberry.COM>


Hi,


PostgreSQL support is still not complete in vtigercrm release 5.0.2.
I've already sent an patch to you when 5.0 was released, but you
said to incorporate this into 5.0.1 ...

In 5.1_jens the PostgreSQL support is fine. 5.1_jens is based on 5.0.2.
I may extract the PostgreSQL related diffs between 5.0.2 and 5.1_jens and
hand them over to you as a patch until sunday ...
Should I? 


Kind regards,
Jens
On Fri, Nov 24, 2006 at 01:34:46PM +0530, Philip wrote:
> Team,
> 
> Iam very happy to inform you all we have crossed half way mark inversion 5.0.3 development.  As of today we have fixed about 60+issues and updated the bleeding-edge demo @ 
> 
> http://en.vtiger.com/wip/index.php
> 
> Trac status:
> 
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/query?status=closed&group=owner&milestone=5.0.3&order=priority.
> 
> 
> Based on the community feedback on quality of the product we areplanning to update the trac status on daily basis so that we canindentify any issues well in advance and avoid last minute glitches.This will also help us making the release hassle free.
> 
> We are looking forward for your help in validating the clossed issues.If there are any breakages kindly drop a mail to philip at vtiger.com sothat i can update the ticket status in trac. 
> 
> Regards,
> Philip

> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      



From gregory.machin at gmail.com  Wed Nov 29 07:32:54 2006
From: gregory.machin at gmail.com (Gregory Machin)
Date: Wed, 29 Nov 2006 14:32:54 +0200
Subject: [Vtigercrm-developers] vtigercrm nubee
Message-ID: <30200a940611290432s3c146c22h2deecc7b74021ad3@mail.gmail.com>

Hi All.
I'm trying to install my, vtiger 5.0.2 from the tgz file..
and I get the following on the finish step ....

Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to
allocate 64 bytes) in
/var/www/html/vtigercrm/adodb/adodb-xmlschema.inc.php on line 1656

Im using Fedora Core 6 64_bit
AMD Turion 64 3Hz
1Gig Ram
apache 2.2.3
php 5.1.6

php.ini ...
<snip>
max_execution_time = 300     ; Maximum execution time of each script, in second
max_input_time = 60     ; Maximum amount of time each script may spend parsing
memory_limit = 512M      ; Maximum amount of memory a script may consume
</snip>

I started out memory_limit = 32M then 64M then 128M then got peeved
and set it to 512M
and still the same error..

I have played with all the setting I know and have used to resolve,
similar problems before ..
I'm stumped ...

please help

Many thanks


-- 
Gregory Machin
gregory.machin at gmail.com
www.linuxpro.co.za


From nithya at vtiger.com  Wed Nov  1 22:27:08 2006
From: nithya at vtiger.com (Nithya)
Date: Wed, 01 Nov 2006 22:27:08 -0800
Subject: [Vtigercrm-developers] Forum Moderation
Message-ID: <10ea7597a25.-7019041752458725766.5893219660014322383@@vtiger.com>

Hi Ken,

Thank you for your mail and valuable input.

We have been off late taking the operation of moving some of  our posts(issues) from forums to bugtrac as far as possible so that it is ticketed for developers' attention as soon as possible. Once we move it there, we lock these posts, so that the status of the issue can be seen in the trac itself. 

We have successfully completed moving all code contributions  and most of the other posts into HOw to's section of our WiKi Documentation  and locked it in forums.We are trying to maintain only general discussions in the main forums so that the forums are not flooded ,making our job simpler.

To lock a forum post, it can be done only by those with moderator priviliges.However, we will try and put a message as the last post , as you have rightly suggested.

And terribly sorry for the spam posts which you have had to cut off. We are trying desperately to do away with these unwarranted posts!

Please keep in touch with us.

Best Regards
Nithya

_______________________________________________________________________________________

Subject: 
[Vtigercrm-developers] Forum Moderation 
From: 
Ken Lyle <kenlyle at yahoo.com> 
Date: 
Mon, 30 Oct 2006 11:08:14 -0800 (PST) 
To: 
vTiger List <vtigercrm-developers at lists.vtigercrm.com> 

I've been moderating a bit, mainly deleting "girlie"
and "pharma" posts...I have seen a couple of minor
gripes about threads being locked.  I wonder whether
the board can be enhanced to show other moderators who
locked the thread, when and why?

Is it possible that threads can get locked by
accident?

Is this one locked, for example, because it's
superseded by another:
http://forums.vtiger.com/viewtopic.php?t=8932&postdays=0&postorder=asc&highlight=email&start=10

If so, it would be good to put a redirect message as
the last post before the thread is locked.

Just trying to get procedures down...

Thanks,
Ken

484-948-5706
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061101/c9ae9beb/attachment-0004.html 

From fp at crm-now.de  Fri Nov  3 02:32:15 2006
From: fp at crm-now.de (Frank Piepiorra)
Date: Fri, 3 Nov 2006 11:32:15 +0100
Subject: [Vtigercrm-developers] Bugtracker needs configuration
In-Reply-To: <mailman.642.1161957249.4976.vtigercrm-developers@lists.vtigercrm.com>
Message-ID: <200611031027.kA3ARZD8005280@doko.im-netz.de>

If you use the bugtracker to report bugs you can choose 4.2 or 5.0.0 but not
5.0.1 or 5.0.2 as the vtiger version. Please add the new version so that
bugs can be assigned to the proper version.

Regards,



From allan.bush+vtiger_dev at gmail.com  Fri Nov  3 08:29:58 2006
From: allan.bush+vtiger_dev at gmail.com (Allan Bush)
Date: Fri, 3 Nov 2006 08:29:58 -0800
Subject: [Vtigercrm-developers] Bugtracker needs configuration
In-Reply-To: <200611031027.kA3ARZD8005280@doko.im-netz.de>
References: <mailman.642.1161957249.4976.vtigercrm-developers@lists.vtigercrm.com>
	<200611031027.kA3ARZD8005280@doko.im-netz.de>
Message-ID: <3bec26390611030829t48726a12qe6f032776ab16bdd@mail.gmail.com>

Thanks for the heads up.

The version/milestone options should be up to date now.  I'd be temped
to remove 5.0.0 and 5.0.1 as version options when creating new tickets
(as the issue may have been fixed with 5.0.2) but I'll leave that up
to the people working on 5.x.

On 11/3/06, Frank Piepiorra <fp at crm-now.de> wrote:
> If you use the bugtracker to report bugs you can choose 4.2 or 5.0.0 but not
> 5.0.1 or 5.0.2 as the vtiger version. Please add the new version so that
> bugs can be assigned to the proper version.
>
> Regards,
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com
>


From joe at tsolucio.com  Fri Nov  3 09:31:15 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Fri, 03 Nov 2006 18:31:15 +0100
Subject: [Vtigercrm-developers] new vtiger_entityname table
Message-ID: <1162575075.11542.23.camel@joesunix.int>

Hi,

What is the new vtiger_entityname table for?
Do we have to add entries to this table for our own modules (timecards,
projects,...)?
Do we have to update the wiki with this info?

Thanks, Joe
TSolucio



From dimitar.peev at gmail.com  Sat Nov  4 02:37:23 2006
From: dimitar.peev at gmail.com (Dimitar Peev)
Date: Sat, 4 Nov 2006 12:37:23 +0200
Subject: [Vtigercrm-developers] no authentication on soap
Message-ID: <3b0e87e10611040237s34d73f8cxdb40a94ceace157a@mail.gmail.com>

I see that it is possible to flood every installation of vtiger with
leads and contacts through the soap RPC, am I right? There is no
password whatsoever.


From kenlyle at yahoo.com  Sun Nov  5 06:45:59 2006
From: kenlyle at yahoo.com (Ken Lyle)
Date: Sun, 5 Nov 2006 06:45:59 -0800 (PST)
Subject: [Vtigercrm-developers] MySQL Migration Tool
Message-ID: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>

I just discovered on my computer the MySQL Migration
Tool, 1.1.4 rc.

This looks like a framework for doing database
transforms, like vTiger 4.2.3 to 5, or Sugar 4.x to
4.2.3 or 5.

This might be a more supportable way to deliver the
data migrations we need.

Ken

484-948-5706
866-OUT OF BOX
(866-688-6326)

-- 
"He who reads nothing is more educated than he who reads nothing but newspapers."  - Thomas Jefferson


From Dirk.Gorny at genion.de  Sun Nov  5 07:04:25 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Sun, 5 Nov 2006 16:04:25 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
Message-ID: <200611051604.25302.Dirk.Gorny@genion.de>

Am Sonntag, 5. November 2006 15:45 schrieb Ken Lyle:
> I just discovered on my computer the MySQL Migration
> Tool, 1.1.4 rc.

Why another tool? The more code, the more errors. The basic thing is to put 
one database struktur to annother. Our ancestry therfor developed SQL. Long 
time ago with applications which where more complex in database structure all 
things were done in SQL. This prevents of running out of memory or on 
timeouts by the *.php or whatever you use. And, the great benefit; you will 
get meaningful error messages which are not dumped by the overlying script.
So my recommendation:
Pure SQJ, as few as possible Loops and complex strukture.
Not referencing by attribute order. Ever referencing by attribute.
I know it is a boring idea, but for me it worked the last 20 Jears.

Best regards,

Dirk


From remco at artoge.nl  Sun Nov  5 07:24:38 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Sun, 5 Nov 2006 16:24:38 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <200611051604.25302.Dirk.Gorny@genion.de>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
Message-ID: <4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>

Hi all,

Well I agree partly, as MYSQL isn't the only database in place! As  
their are some who work with postgrssql instead, not to mention the  
possibility for Oracle or anything else.
If it's a tool to be used by many other sql databases fine, but as  
far as I know it's not.

Refering to Dirk question why another tool, I've been developing with  
another tool: see www.radicore.org because I prefer a even stronger  
splitup: in using 3-tier design architecture.
Although until now it's only been for customisation of VtigerCRM, I  
would love to see the base of 3-tier which is allready within  
VtigerCRM taken a few steps futher.

Ton introduce it futher with a
[quote from radicore website:]
3-Tier Architecture

An architectural pattern of software development in which the  
application logic is separated into different tiers or layers:

The Presentation Layer or User Interface, which all handles all  
communication with the user.
The Business Layer, which has a separate object for each business  
entity.
The Data Access Layer which communicates with the database.
This allows individual layers to be enhanced, or even replaced, with  
minimal impact on the other layers. For example it should be possible  
to change nothing but the contents of the presentation layer in order  
to switch from XHTML output to PDF output, or to change nothing but  
the contents of the data access layer in order to switch from one  
database engine to another.

[end quote]

Best regards, Remco




Op 5-nov-2006, om 16:04 heeft Dirk Gorny het volgende geschreven:

> Am Sonntag, 5. November 2006 15:45 schrieb Ken Lyle:
>> I just discovered on my computer the MySQL Migration
>> Tool, 1.1.4 rc.
>
> Why another tool? The more code, the more errors. The basic thing  
> is to put
> one database struktur to annother. Our ancestry therfor developed  
> SQL. Long
> time ago with applications which where more complex in database  
> structure all
> things were done in SQL. This prevents of running out of memory or on
> timeouts by the *.php or whatever you use. And, the great benefit;  
> you will
> get meaningful error messages which are not dumped by the overlying  
> script.
> So my recommendation:
> Pure SQJ, as few as possible Loops and complex strukture.
> Not referencing by attribute order. Ever referencing by attribute.
> I know it is a boring idea, but for me it worked the last 20 Jears.
>
> Best regards,
>
> Dirk
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061105/4d7844fb/attachment-0004.html 

From acc at anthonychavez.org  Sun Nov  5 13:42:43 2006
From: acc at anthonychavez.org (Anthony Chavez)
Date: Sun, 05 Nov 2006 14:42:43 -0700
Subject: [Vtigercrm-developers] Customer portal sending wrong URL
Message-ID: <87mz75d0z0.fsf@hephaistos.aegaeum.anthonychavez.org>

vtigercrm-developers:

It would appear that version 5.0.0 of the Customer Portal (on FreeBSD
6.1-RELEASE-p3, Apache 2.2.3, and PHP 5.1.6) is not sending the
correct URL in emails.  Here is an example, which results in 404:

https://mydomain.com/vtiger/customerportal/general.php?action=UserTickets&ticketid=236&fun=detail

general.php does not exist anywhere in my vtiger tree.  Did I neglect
to install it, or has it been removed since version 4.x?

Thanks.

-- 
Anthony Chavez                                 http://anthonychavez.org/
mailto:acc at anthonychavez.org         jabber:acc at jabber.anthonychavez.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 480 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061105/b6da2111/attachment-0003.bin 

From Dirk.Gorny at genion.de  Sun Nov  5 23:22:15 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Mon, 6 Nov 2006 08:22:15 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
Message-ID: <200611060822.15947.Dirk.Gorny@genion.de>

Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:

> Refering to Dirk question why another tool, I've been developing with
> another tool: see www.radicore.org because I prefer a even stronger
> splitup: in using 3-tier design architecture.
> Although until now it's only been for customisation of VtigerCRM, I
> would love to see the base of 3-tier which is allready within
> VtigerCRM taken a few steps futher.

Hello Remco,

Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier architecture not 
the same thing than putting a new 300HP engine in an old Volkswagen Beetle?
There are better things to deal with a 3-tier architecture.
For exaple using a application server like Jboss and you get rid of much 
security issuees by having all those connectors and process encapsulation 
allready there.
I had worked a little with openCRX (http://www.opencrx.org/) wich has to my 
mind the best architecture (MDA) but must become user-friendly which 
vtigercrm is. In my opinion vtigercrm has to do a stronger encapsulating of 
the modules and building a crm-core as an interface for the Modules. But I am 
not shure if this is actually possible with php. At the end you have another 
application server.

Best regards,

Dirk


From remco at artoge.nl  Sun Nov  5 23:42:40 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 6 Nov 2006 08:42:40 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <200611060822.15947.Dirk.Gorny@genion.de>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
	<200611060822.15947.Dirk.Gorny@genion.de>
Message-ID: <07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>

Hi Dirk,


Well to use your metafor:
If you would use php 3 it would be: an old beetle with a new engine.
But as we're using php 5 it's the new beetle with a new engine.
Indeed it's possible but not easy to build, and I agree again partly:
As I'm using a hosted service for vtigercrm: it's only used for crm,  
in that way it's in my mind all ready an application server.
I will have to look into openCRX before I respond to the rest aswell.

Best regards and learning :-)

Remco



Op 6-nov-2006, om 8:22 heeft Dirk Gorny het volgende geschreven:

> Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:
>> Refering to Dirk question why another tool, I've been developing with
>> another tool: see www.radicore.org because I prefer a even stronger
>> splitup: in using 3-tier design architecture.
>> Although until now it's only been for customisation of VtigerCRM, I
>> would love to see the base of 3-tier which is allready within
>> VtigerCRM taken a few steps futher.
>
> Hello Remco,
>
> Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier  
> architecture not
> the same thing than putting a new 300HP engine in an old Volkswagen  
> Beetle?
> There are better things to deal with a 3-tier architecture.
> For exaple using a application server like Jboss and you get rid of  
> much
> security issuees by having all those connectors and process  
> encapsulation
> allready there.
> I had worked a little with openCRX (http://www.opencrx.org/) wich  
> has to my
> mind the best architecture (MDA) but must become user-friendly which
> vtigercrm is. In my opinion vtigercrm has to do a stronger  
> encapsulating of
> the modules and building a crm-core as an interface for the  
> Modules. But I am
> not shure if this is actually possible with php. At the end you  
> have another
> application server.
>
> Best regards,
>
> Dirk
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com



From lists.vtigercrm.com at callum-macdonald.com  Mon Nov  6 04:19:12 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Mon, 06 Nov 2006 19:19:12 +0700
Subject: [Vtigercrm-developers] Field cascade from Account to Contact
Message-ID: <454F2840.6030907@callum-macdonald.com>

Hey Guys,

Does anyone know if it's possible to have Account Type available as a 
field in a contact's record? So you could filter contacts according to 
Account Type, etc. If not, any suggestions on how we'd best achieve 
this? I can see a couple of options...

1) Create a custom field in Contacts and hack vtiger to automatically 
update the field every time an account field is changed. Potentially nasty.

2) Hack the sql to join the field in and add it to the result set. Again 
potentially nasty.

Suggestions most welcome on a postcard... :)

Cheers,


Callum.



From remco at artoge.nl  Mon Nov  6 08:57:02 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 6 Nov 2006 17:57:02 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<200611051604.25302.Dirk.Gorny@genion.de>
	<4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl>
	<200611060822.15947.Dirk.Gorny@genion.de>
	<07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
Message-ID: <F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>

Well,

Reading a bit more:
http://www-128.ibm.com/developerworks/rational/library/may05/brown/ 
index.html

It makes sence: radicore.org is a usefull part for an MDA approche.  
Read for example, in the above url: Using MDA to customize a solution  
framework

And yes with a stronger encapsulating of the modules and building a  
crm-core as an interface for the Modules.
You can have another application server with php.

But I must state aswell that I do hope to see that's we'll still  
provide php only as wamp/lamp solution.
As said before, that's all I need :-)
If all this could help to improve the product let's then use it.


@Dirk, could you give us your idea's on more specific improvements,  
compared with openCRX?



Best regards,

Remco




Op 6-nov-2006, om 8:42 heeft Dhr. R.R. Gerbrands het volgende  
geschreven:

> Hi Dirk,
>
>
> Well to use your metafor:
> If you would use php 3 it would be: an old beetle with a new engine.
> But as we're using php 5 it's the new beetle with a new engine.
> Indeed it's possible but not easy to build, and I agree again partly:
> As I'm using a hosted service for vtigercrm: it's only used for crm,
> in that way it's in my mind all ready an application server.
> I will have to look into openCRX before I respond to the rest aswell.
>
> Best regards and learning :-)
>
> Remco
>
>
>
> Op 6-nov-2006, om 8:22 heeft Dirk Gorny het volgende geschreven:
>
>> Am Sonntag, 5. November 2006 16:24 schrieb Dhr. R.R. Gerbrands:
>>> Refering to Dirk question why another tool, I've been developing  
>>> with
>>> another tool: see www.radicore.org because I prefer a even stronger
>>> splitup: in using 3-tier design architecture.
>>> Although until now it's only been for customisation of VtigerCRM, I
>>> would love to see the base of 3-tier which is allready within
>>> VtigerCRM taken a few steps futher.
>>
>> Hello Remco,
>>
>> Nice idea, but is PHP (mixed with java, xml, ..) on a 3-tier
>> architecture not
>> the same thing than putting a new 300HP engine in an old Volkswagen
>> Beetle?
>> There are better things to deal with a 3-tier architecture.
>> For exaple using a application server like Jboss and you get rid of
>> much
>> security issuees by having all those connectors and process
>> encapsulation
>> allready there.
>> I had worked a little with openCRX (http://www.opencrx.org/) wich
>> has to my
>> mind the best architecture (MDA) but must become user-friendly which
>> vtigercrm is. In my opinion vtigercrm has to do a stronger
>> encapsulating of
>> the modules and building a crm-core as an interface for the
>> Modules. But I am
>> not shure if this is actually possible with php. At the end you
>> have another
>> application server.
>>
>> Best regards,
>>
>> Dirk
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061106/d2e0f462/attachment-0004.html 

From joel.rydbeck at nubrek.com  Mon Nov  6 21:08:12 2006
From: joel.rydbeck at nubrek.com (Joel Rydbeck)
Date: Mon, 6 Nov 2006 23:08:12 -0600
Subject: [Vtigercrm-developers] 4.2 development
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com><200611051604.25302.Dirk.Gorny@genion.de><4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl><200611060822.15947.Dirk.Gorny@genion.de><07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
Message-ID: <64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>

Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
 
- Joel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 3212 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061106/2b038104/attachment-0005.bin 

From nolan at peaceworks.ca  Mon Nov  6 21:19:27 2006
From: nolan at peaceworks.ca (Nolan Andres)
Date: Tue, 07 Nov 2006 00:19:27 -0500
Subject: [Vtigercrm-developers] 4.2 development
In-Reply-To: <64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com><200611051604.25302.Dirk.Gorny@genion.de><4F07CC95-4CF9-452F-894F-9B9BF3100785@artoge.nl><200611060822.15947.Dirk.Gorny@genion.de><07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
	<64F321E3D109BE4C8C545E6C3514C9DB02D5EF@34093-EVS2C1.exchange.rackspace.com>
Message-ID: <4550175F.30105@peaceworks.ca>

I'm interested, but can't be counted on for a lot of contributions. I'd 
be willing to take on issue 1507 (partial matches in searches), though, 
if that would be useful.

peace,
Nokes

Joel Rydbeck wrote:
> Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
>  
> - Joel
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


From grahama at add-ons.co.uk  Mon Nov  6 23:58:35 2006
From: grahama at add-ons.co.uk (grahama at add-ons.co.uk)
Date: Tue, 7 Nov 2006 07:58:35 +0000 (GMT)
Subject: [Vtigercrm-developers] 4.2 development
Message-ID: <865798.1162886315797.JavaMail.wibapp@vuk1120.visto-mgmt.com>

Joel

We are still on 4.x and because of the many custom requirements we have, we will remain for sometime.

We are also using mysql, would you say that a move to postgres would be beneficial ? What benefits have you seen?

Many thanks....any comments welcome.

Graham 

-----Original Message-----
From: "Joel Rydbeck" <joel.rydbeck at nubrek.com>
To: "vtigercrm-developers at lists.vtigercrm.com" <vtigercrm-developers at lists.vtigercrm.com>
Sent: 07/11/06 05:07
Subject: 4.2 development

Can I get a quick handcount of who is interested in 4.2 development. We're still checking in a lot of features in advance of 4.2.5; and this platform is rock solid on PostgreSQL.
 
- Joel



From dgrant at accuratetechnologies.com  Tue Nov  7 09:02:45 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 7 Nov 2006 12:02:45 -0500
Subject: [Vtigercrm-developers] profileGlobalPermission
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4D88@exch.accuratetechnologies.com>

OK gang, I've been beating my head against this for a while and I'm
starting to get frustrated.

 

Here is the issue: 

 

1)         in the ListView for TroubleTickets, some users can see
TicketID and some cannot (the requirement is that all users can see
them)

 

2)         There is no place in the field permissions editor for Ticket
ID (or crmid, for that matter)

 

3)         Certain profiles CAN see TicketID; some cannot.

 

4)         The difference between those profiles that can see ticketID
is that they have $profileGlobalPermission[1] set to 0, where those that
cannot see TicketID have $profileGlobalPermission[1] set to 1;

 

5)         I think I've found where in the code the test is made - if
you have $is_admin true OR $profileGlobalPermission[1]==0, then you get
the full field list for that module/tab. Otherwise, there's a
complicated query that pulls down allowed fields.

 

6)         I have not (yet) found where $profileGlobalPermission[1] is
set

 

7)         I have not (yet) found how to add TicketID to a list of
permissions where $profileGlobalPermission[1] == 0;

 

I think being able to do #7 - and being to do it via the security
interface - is the ultimate goal here.

 

Can somebody PLEASE explain how this all interacts, before I go crazy?

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061107/980beb25/attachment-0004.html 

From joe at tsolucio.com  Tue Nov  7 12:59:04 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 07 Nov 2006 21:59:04 +0100
Subject: [Vtigercrm-developers]  profileGlobalPermissions
Message-ID: <1162933144.8036.11.camel@joeshome.int>

Hi Dennis,

I have seen that the $profileGlobalPermissions array is set in the users
corresponding user_privileges_id.php file (in the corresponding
directory). This file is created in the CreateUserPrivilegeFile function
in a script of the same name in modules/Users directory. I don't know
when the function is called but I suppose that it is when you create a
user.

This function calls getCombinedUserGlobalPermission and this one calls
getProfileGlobalPermission which accesses the table
vtiger_profile2globalpermissions where the profiles Global Access
Privileges are assigned.

So I think that those profiles that are working must have the Global
Privileges set to ALL and the others don't.

I suppose that if you change the values in the database, which is
equivalent to changing the profiles value you may get VT working in a
way that you don't want. I think you will have to look at another way of
adding the ticketid to the view. Probably playing with the SQL command.

What I did was create my own ticketid field which autoincrements with
code based on that available in the forums (I can send you my version if
you want) and I use this field instead of VT's ticketid.

Sorry I couldn't be of more help.

Regards, Joe
TSolucio



From dfar2008 at gmail.com  Tue Nov  7 20:27:26 2006
From: dfar2008 at gmail.com (ding jianting)
Date: Wed, 8 Nov 2006 12:27:26 +0800
Subject: [Vtigercrm-developers] dashboard bug
Message-ID: <fb148e2a0611072027v4c54a095q575306bf3c23bc89@mail.gmail.com>

Hi,all
I found error msg "No data available with the specified time period"  in
Dashboard module. I cracked code and found $this->module_id,module_name are
invoked by process_full_list_query function of CRMEntity Bean. But there are
no module_id,module_name fields in Potentails bean. Two fields exists in
5.0.1. So I added module_id,module_name field in Potentials.php.
Dashboard module works properly again.

another bug about report module:
AdvancedFilter.php getSecondaryColumns_AdvFilterHTML function:
from:
if(isset($mod_strings[$fieldlable]))
to:
if(isset($mod_strings[$fieldlabel]))

If any problem, pls let me know.

Thanks and regards

-- 
DingJianting
________________________________________
????????????: http://www.c3crm.com
-----------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061108/2bd6b40e/attachment-0004.html 

From lists.vtigercrm.com at callum-macdonald.com  Tue Nov  7 20:46:31 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Wed, 08 Nov 2006 11:46:31 +0700
Subject: [Vtigercrm-developers] Release naming
Message-ID: <45516127.4030306@callum-macdonald.com>

Hi Guys,

I think the naming of releases should be simplified. I suggest Joomla 
provides a good template to use (with one or two improvements):
http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11

vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
from what version you can apply patch 2, and so on. I suggest we use the 
same method as Joomla. When a new version is released (5.0.2) then the 
following files are released:
vtigercrm-5.0.0-to-5.0.2-patch.zip
vtigercrm-5.0.1-to-5.0.2-patch.zip
vtigercrm-5.0.2-full-windows.exe
vtigercrm-5.0.2-full-linux.bin
vtigercrm-5.0.2-full-lamp.tgz

<http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
think it's important to include the windows/linux/lamp in the file name. 
I know it's obvious from the extension to MOST people, but not to everyone.

I also think these files should all be released in the same package in 
sourceforge. In my opinion, splitting the full and patch releases is 
confusing.

I think this is a HUGELY important issue, as important as the recent 
heated debate over the naming of the GA release.

Comments on a postcard...


Callum.


From ncknight at pacific.net.sg  Tue Nov  7 21:41:07 2006
From: ncknight at pacific.net.sg (Nicholas Chan)
Date: Wed, 08 Nov 2006 13:41:07 +0800
Subject: [Vtigercrm-developers] Release naming
In-Reply-To: <45516127.4030306@callum-macdonald.com>
References: <45516127.4030306@callum-macdonald.com>
Message-ID: <45516DF3.20809@pacific.net.sg>

I just found it odd that the naming issue is still being discussed till
today. Why isn't the standard set and enforced already?

Callum Macdonald wrote:
> Hi Guys,
>
> I think the naming of releases should be simplified. I suggest Joomla 
> provides a good template to use (with one or two improvements):
> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11
>
> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
> from what version you can apply patch 2, and so on. I suggest we use the 
> same method as Joomla. When a new version is released (5.0.2) then the 
> following files are released:
> vtigercrm-5.0.0-to-5.0.2-patch.zip
> vtigercrm-5.0.1-to-5.0.2-patch.zip
> vtigercrm-5.0.2-full-windows.exe
> vtigercrm-5.0.2-full-linux.bin
> vtigercrm-5.0.2-full-lamp.tgz
>
> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
> think it's important to include the windows/linux/lamp in the file name. 
> I know it's obvious from the extension to MOST people, but not to everyone.
>
> I also think these files should all be released in the same package in 
> sourceforge. In my opinion, splitting the full and patch releases is 
> confusing.
>
> I think this is a HUGELY important issue, as important as the recent 
> heated debate over the naming of the GA release.
>
> Comments on a postcard...
>
>
> Callum.
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
>   



From jtk at yahoo.com  Tue Nov  7 22:38:26 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Wed, 08 Nov 2006 01:38:26 -0500
Subject: [Vtigercrm-developers] Release naming
References: <45516127.4030306@callum-macdonald.com>
Message-ID: <pan.2006.11.08.06.38.24.169176@yahoo.com>

Callum Macdonald wrote:
> I think the naming of releases should be simplified. vtiger 5 patch 2
> and vtiger 5.0.2 are confusing names. It is not clear from what version
> you can apply patch 2, and so on. I suggest we use the same method as
> Joomla. When a new version is released (5.0.2) then the following files
> are released:
>
> I also think these files should all be released in the same package in
> sourceforge. In my opinion, splitting the full and patch releases is
> confusing.

Just an opinion, but I don't think vtigercrm should concern itself with
(or release) anything except pure-source, verbatim-to-the-svn-tag tar.gz
and .zip releases.

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseNaming
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseProcedure

Binary installers, patch-overlay releases, these are all the things
that third-party packagers do according to their own standards. We don't
want those problems. Packagers have the expertise and the ultimate
responsibility to do final-installation correctly for their security
strategy. What they need from the vtigercrm team is a rock-solid tarball
with a predictable layout, at a predictable unique URL, happening the same
way with every major, minor and bugfix release.

vtigercrm releases should be tailored for a primary consumer audience of
system packagers, and a secondary audience of expert manual install
aficionados who are willing to obsessively merge the unpacked source tree
to their own customized installation, and additionally set file
permissions, etc, according to a well-documented INSTALL.txt.



From remco at artoge.nl  Wed Nov  8 03:30:17 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Wed, 8 Nov 2006 12:30:17 +0100
Subject: [Vtigercrm-developers] Release naming
In-Reply-To: <45516DF3.20809@pacific.net.sg>
References: <45516127.4030306@callum-macdonald.com>
	<45516DF3.20809@pacific.net.sg>
Message-ID: <B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>

@ Nicholas,

If you find it odd, you might want to wait using vtigercrm as we're  
in the process of becoming mature.

@ Callum,

What you are refering to is not release naming to my idea.
But package naming.
I think that's a bit confusing for more people,
The release naming is still the same, in you example 5.0.2,
depending on the target platform is you're suggested packet naming.

I can agree with it, yet as our user are no newbee's the naming as  
stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
ReleaseNaming
is enough, I would suggest adding a wiki page for the newbee's who  
doesn't know what to download instead.

Best regards,

Remco




Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:

> I just found it odd that the naming issue is still being discussed  
> till
> today. Why isn't the standard set and enforced already?
>
> Callum Macdonald wrote:
>> Hi Guys,
>>
>> I think the naming of releases should be simplified. I suggest Joomla
>> provides a good template to use (with one or two improvements):
>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/ 
>> frs.joomla_1_0.1_0_11
>>
>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not  
>> clear
>> from what version you can apply patch 2, and so on. I suggest we  
>> use the
>> same method as Joomla. When a new version is released (5.0.2) then  
>> the
>> following files are released:
>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>> vtigercrm-5.0.2-full-windows.exe
>> vtigercrm-5.0.2-full-linux.bin
>> vtigercrm-5.0.2-full-lamp.tgz
>>
>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0- 
>> patch2.zip?download>I
>> think it's important to include the windows/linux/lamp in the file  
>> name.
>> I know it's obvious from the extension to MOST people, but not to  
>> everyone.
>>
>> I also think these files should all be released in the same  
>> package in
>> sourceforge. In my opinion, splitting the full and patch releases is
>> confusing.
>>
>> I think this is a HUGELY important issue, as important as the recent
>> heated debate over the naming of the GA release.
>>
>> Comments on a postcard...
>>
>>
>> Callum.
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>
>>
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061108/b9c3bc42/attachment-0004.html 

From joe at tsolucio.com  Wed Nov  8 15:50:30 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Thu, 09 Nov 2006 00:50:30 +0100
Subject: [Vtigercrm-developers] vtiger popup calendar start day of the week
Message-ID: <1163029830.28710.8.camel@joeshome.int>

Hi,

I tried to get the VT calendar start on monday instead of sunday. I
found the code very hard to follow and, to my surprise, there was no
variable whose value I could change to get the calendar start on monday.
As I did for the javascript calendar changing the variable firstDay.

I finaly add a bit of code to the modules/Calendar/Calendar.php

I changed line 111
   $num_of_prev_days = $firstday_of_month->dayofweek;

to
   $num_of_prev_days = ($firstday_of_month->dayofweek==0 ? 6 :
$firstday_of_month->dayofweek-1);

And the same for year. I changed line 127
  $noof_prevdays = $firstday_of_month->dayofweek;

to
  $noof_prevdays = ($firstday_of_month->dayofweek==0 ? 6 :
$firstday_of_month->dayofweek-1);

This seems to be working fine but I really don't know what I am doing.
 Does this break other things?
 Will I start getting activities and notifications on the wrong dates?
 Is there really no global variable I can change to get the calendar
start on monday?

Any comments would be greatly appreciated.

Thanks, Joe
TSolucio




From leandro at oriontek.org  Wed Nov  8 19:12:01 2006
From: leandro at oriontek.org (Leandro Rache Sanchez)
Date: Wed, 8 Nov 2006 22:12:01 -0500
Subject: [Vtigercrm-developers] vtiger 5.0.0 to vtiger 5.0.2
Message-ID: <200611082212.01724.leandro@oriontek.org>

Hi developers,
I tried to install vtiger 5.0.2 from SVN and this ok, but i need to update 
vtiger 5.0.0 to vtiger 5.0.2, some simply copy paste from SVN soesn't work, 
please help me with some script for this update.

Thanks, 
-- 

   ~     Leandro Rache Sanchez
 (. .)   leandro at oriontek.org
  \V/      
 //"\\   Corporacion Tecnol?gica ORION.
/( ' )\  info at oriontek.org
 ^*-*^   http://www.oriontek.org/orion/
---------------------------------------




From gopals at vtiger.com  Thu Nov  9 05:32:58 2006
From: gopals at vtiger.com (Gopal)
Date: Thu, 09 Nov 2006 19:02:58 +0530
Subject: [Vtigercrm-developers] Announcement: Richie's Europe Trip Schedule..
Message-ID: <45532E0A.4050709@vtiger.com>

Dear Team,

I am pleased to inform you all that Richie's Europe trip has been 
finalized.

He will be reaching *UK* before 11th Nov and start visiting our user 
community and partners from 12th of Nov. In UK he will stay for about 10 
days time. Based on the community needs he will extend his stay for 3 to 
4 days.

Next, he will be going to *Germany* or *France* for around 20 days stay 
where he will visit our community & business partners in various cities. 
In *France* he will be attending an Open Source Competition as a Jury 
member (Nov 30th and 31st).

http://www.tropheesdulibre.org/index.php?module=4&action=3

His stay in France for 10 to 15 days period in depending up on the 
community requirements. He will also visit other *Schengen* countries 
depending on the community demand.

*/I would like to request you all to let us know your convenient place & 
time to meet Richie. In each country he would like meet most of our 
community members.

/*Please drop a mail directly to *richie at vtiger.com* (and CC to 
gopals at vtiger.com) with the following information:

    * Place
    * Convenient Time
    * Address & Phone No

Looking forward for your kind cooperation for making vtiger's first trip 
to Europe a successful one!

Best Regards,
*Gopal
vtiger Team*
---
S.S.G.Gopal
+1 925 965 6387
Skype: sripadag
blog: http://blogs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061109/69cf1fb5/attachment-0004.html 

From kenlyle at yahoo.com  Thu Nov  9 07:15:20 2006
From: kenlyle at yahoo.com (Ken Lyle)
Date: Thu, 9 Nov 2006 07:15:20 -0800 (PST)
Subject: [Vtigercrm-developers] Being Good Tool Users
Message-ID: <20061109151520.49889.qmail@web37312.mail.mud.yahoo.com>

Community Engagement and Bug Fix Case Study:

http://forums.vtiger.com/viewtopic.php?t=10811

I submitted a simple one file patch on October 31.
That fix is stuck in the middle of the forum thread at
the bottom of page 3.

**Can I make a post within a thread Starred, Featured,
Sticky?  That would seem like a good thing in this
case.

***Some people have reported that it works, some
people have other issues.  It appears that we have NO
STRUCTURED mechanism for capturing the fact that there
is a candidate fix, and what versions and operating
systems on which the fix was successful or
unsuccessful.

Furthermore, we don't seem to have a way of tracking
the 'credibility' of each report.  Ideally, we could
score these like so:

Senior Users: 90% fix rate
Intermediate Users: 60% fix rate
Noob Users: 50% fix rate

>From this example, I would assume that the fix is
good, for the versions where the Senior Users report a
fix rate over 80%, and the rest is user error.

Back to the story....Today, 10 days later (Is that
good? It gives time to get feedback, but wastes time
of people who have a hard time finding the
fix)...Nithya moved this to TRAC,
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/ticket/2578
, and posted a link to the 
thread above, but it's not obvious that you have to go
to page 3 to find the patch.  There's no way in the
forum to filter just posts with attachments....see **

SO, I posted the patch to the TRAC ticket.  But not
everyone has access to TRAC, I think.  FURTHER, when I
go to the TRAC page,
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report ,
not logged in (public), I can't SEARCH

How can I determine whether the bug that I am
considering posting has already been posted?  Even if
I click Active Tickets, 
there is No Search.  I don't believe that everyone
knows about Ctrl+F (Firefox).

IF we had ***, either in PHPBB or TRAC, then we could
confidently LOCK the forum thread with a single
redirect to the TRAC ticket.

SO, here is an idea...

SEARCH in the Forums seems broken...why, when I search
for "Incoming Email" is the thread above 6th, behind
less relevant threads?

Assuming that THAT can be fixed...perhaps, when there
is a candidate fix for a bug, there should be a POLL
created that runs for a certain period...after which,
if more than X% report success, the thread is locked,
and  
a Starred, Featured, Sticky redirect to the TRAC
ticket placed atop the thread.  This would save
everyone time...

I am a Moderator, where is the ability to create a
Poll?  I would like to try this concept...

Second, maybe TRAC is a better place to collect
Operating System and version information for each bug
and candidate fix.  Who can add these 
fields?

This would also provide us usage data, right?  I know
Sugar has that thing that collects usage data, which I
would guess includes O/S, # of records,
etc.  If we know what configurations people are using,
we can better isolate bugs...In fact, I can't really
imagine trying to do it without that info.

How can we even set priorities without knowing, for
example, "There are 10 users with Bug #XXXX, but they
are all running Red Hat 7".  Then we can issue
a statement that Red Hat 7 is not an officially
supported platform, but Good Luck anyway....

I think it's important to realize that if we can save
120 people 30 seconds every day, we can get an extra
hour that can be 
used to improve vTiger.

I offer a challenge to all of you.....to select tools
and use them in a way that accurately reflects the
talent and intelligence of this group, because, right
now, it does not, IMNSHO (In My Not So Humble
Opinion).  

AND, of course, the Core Team should avoid shipping
critical modules in a broken state.

I want to help this effort, but become disheartened
when it looks like nobody is thinking systematically,
and there is no documentation sufficient
to guide a reasonably bright person in how to
contribute...I'll contribute some of that next, partly
based on feedback to this thread.

I've put hours into composing this, and would like to
see something come of it...

Thanks,
Ken

484-948-5706
866-OUT OF BOX
(866-688-6326)

-- 
"He who reads nothing is more educated than he who reads nothing but newspapers."  - Thomas Jefferson


From jens at Strawberry.COM  Thu Nov  9 11:43:48 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Thu, 9 Nov 2006 20:43:48 +0100
Subject: [Vtigercrm-developers] Announcement: Richie's Europe Trip
	Schedule..
In-Reply-To: <45532E0A.4050709@vtiger.com>;
	from Gopal on Thu, Nov 09, 2006 at 07:02:58PM +0530
References: <45532E0A.4050709@vtiger.com>
Message-ID: <20061109204348.A13058@Strawberry.COM>

Hi,

End of November/Beginnig of December would be fine for me all the
time. My location is Munich/Germany. I'd may pick up Richie at the
munich airport and arrange a hotel room for him here in my town.


My address is

    Strawberry EDV Systeme GmbH
    Jens Hamisch - CEO
    Am Flosskanal 9a
    D-82515 Wolfratshausen
    Tel.: +49 8171 41805-0


You may contact me or our my colleque Mrs. Westermann to clarify the
details.


Jens




On Thu, Nov 09, 2006 at 07:02:58PM +0530, Gopal wrote:
> Dear Team,
> 
> I am pleased to inform you all that Richie's Europe trip has been 
> finalized.
> 
> He will be reaching *UK* before 11th Nov and start visiting our user 
> community and partners from 12th of Nov. In UK he will stay for about 10 
> days time. Based on the community needs he will extend his stay for 3 to 
> 4 days.
> 
> Next, he will be going to *Germany* or *France* for around 20 days stay 
> where he will visit our community & business partners in various cities. 
> In *France* he will be attending an Open Source Competition as a Jury 
> member (Nov 30th and 31st).
> 
> http://www.tropheesdulibre.org/index.php?module=4&action=3
> 
> His stay in France for 10 to 15 days period in depending up on the 
> community requirements. He will also visit other *Schengen* countries 
> depending on the community demand.
> 
> */I would like to request you all to let us know your convenient place & 
> time to meet Richie. In each country he would like meet most of our 
> community members.
> 
> /*Please drop a mail directly to *richie at vtiger.com* (and CC to 
> gopals at vtiger.com) with the following information:
> 
>     * Place
>     * Convenient Time
>     * Address & Phone No
> 
> Looking forward for your kind cooperation for making vtiger's first trip 
> to Europe a successful one!
> 
> Best Regards,
> *Gopal
> vtiger Team*
> ---
> S.S.G.Gopal
> +1 925 965 6387
> Skype: sripadag
> blog: http://blogs.vtiger.com

> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      



From natan.pereira at fator9.com  Fri Nov 10 09:26:28 2006
From: natan.pereira at fator9.com (natan.pereira at fator9.com)
Date: Fri, 10 Nov 2006 15:26:28 -0200
Subject: [Vtigercrm-developers] Adding a new field with radio button
Message-ID: <20061110152628.uw0gorykx0g088wk@webmail.fator9.com>

I am having some problems with a new field, what I want is:

Add two radios buttons (when I am registring a new Lead), that when  
one is selected  appers a especific field and when the other is  
selected appers other especific field.

I know how to do a field in database, but I dont know how to do the  
radio button and where I will put de progamming (if clause).

I will be glad with somebody could help me...



From neil.temperley at exemail.com.au  Mon Nov 13 02:27:24 2006
From: neil.temperley at exemail.com.au (Neil Temperley)
Date: Mon, 13 Nov 2006 21:27:24 +1100
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items and
	general column layout
In-Reply-To: <45532E0A.4050709@vtiger.com>
Message-ID: <000901c7070e$4fc70c90$6401a8c0@Nemrut>

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtiger-Neil.tar.gz
Type: application/x-gzip
Size: 88018 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061113/b242a0d8/attachment-0003.gz 

From lists.vtigercrm.com at callum-macdonald.com  Mon Nov 13 04:24:00 2006
From: lists.vtigercrm.com at callum-macdonald.com (Callum Macdonald)
Date: Mon, 13 Nov 2006 19:24:00 +0700
Subject: [Vtigercrm-developers] Release naming (package naming)
In-Reply-To: <B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
References: <45516127.4030306@callum-macdonald.com>	<45516DF3.20809@pacific.net.sg>
	<B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
Message-ID: <455863E0.30509@callum-macdonald.com>

Remco, you're right, I'm confusing package naming with release naming.

The release naming documentation states "The vtigercrm project no longer 
produces Patches 
<http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/PatchSubmission> for 
distribution..." but there is a patch available here:
http://www.vtiger.com/index.php?option=com_content&task=view&id=30&Itemid=57

Who releases that patch? It's really the name of the patches that I 
think should be simplified, not the naming of the main releases.

Cheers - Callum.

Dhr. R.R. Gerbrands wrote:
> @ Nicholas,
>
> If you find it odd, you might want to wait using vtigercrm as we're in 
> the process of becoming mature. 
>
> @ Callum,
>
> What you are refering to is not release naming to my idea.
> But package naming.
> I think that's a bit confusing for more people,
> The release naming is still the same, in you example 5.0.2,
> depending on the target platform is you're suggested packet naming.
>
> I can agree with it, yet as our user are no newbee's the naming as 
> stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ReleaseNaming
> is enough, I would suggest adding a wiki page for the newbee's who 
> doesn't know what to download instead.
>
> Best regards,
>
> Remco
>
>
>
>
> Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:
>
>> I just found it odd that the naming issue is still being discussed till
>> today. Why isn't the standard set and enforced already?
>>
>> Callum Macdonald wrote:
>>> Hi Guys,
>>>
>>> I think the naming of releases should be simplified. I suggest Joomla 
>>> provides a good template to use (with one or two improvements):
>>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/frs.joomla_1_0.1_0_11
>>>
>>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not clear 
>>> from what version you can apply patch 2, and so on. I suggest we use 
>>> the 
>>> same method as Joomla. When a new version is released (5.0.2) then the 
>>> following files are released:
>>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>>> vtigercrm-5.0.2-full-windows.exe
>>> vtigercrm-5.0.2-full-linux.bin
>>> vtigercrm-5.0.2-full-lamp.tgz
>>>
>>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0-patch2.zip?download>I 
>>> think it's important to include the windows/linux/lamp in the file 
>>> name. 
>>> I know it's obvious from the extension to MOST people, but not to 
>>> everyone.
>>>
>>> I also think these files should all be released in the same package in 
>>> sourceforge. In my opinion, splitting the full and patch releases is 
>>> confusing.
>>>
>>> I think this is a HUGELY important issue, as important as the recent 
>>> heated debate over the naming of the GA release.
>>>
>>> Comments on a postcard...
>>>
>>>
>>> Callum.
>>> _______________________________________________
>>> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>>>
>>>
>>
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
> Dhr. R.R. Gerbrands
>
> Artoge 
>
> ICT Security & Administration
> Jachthoornstraat 59
> 6219 BN  Maastricht
>
> kvk 14083961
> btw 155595106B01
>
> t:    +31 43 325 0316 
> m:  +31 6 2127 8082
> e:   remco at artoge.nl <mailto:remco at artoge.nl>
> i:    www.artoge.nl
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 



From remco at artoge.nl  Mon Nov 13 09:33:15 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Mon, 13 Nov 2006 18:33:15 +0100
Subject: [Vtigercrm-developers] Release naming (package naming)
In-Reply-To: <455863E0.30509@callum-macdonald.com>
References: <45516127.4030306@callum-macdonald.com>	<45516DF3.20809@pacific.net.sg>
	<B26BCB23-8AFD-4043-B5C2-6222BDAF6075@artoge.nl>
	<455863E0.30509@callum-macdonald.com>
Message-ID: <AFD411F9-259C-45D4-AE90-C46863E8ECFB@artoge.nl>

Hi Callum,

I see what you mean:

LAMP/WAMP download (6.1 MB/tar.gz)
v5.0 Patch 2  download  (0.65 MB/tar.gz)

I agree, that's not a propere release naming, reading blog: http:// 
www.vtiger.com/blogs/page/7/  that was handle by Philip and Mickie.
Looking at: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
ReleaseNaming and seeing tar.gz I think they should name this: "LAMP/ 
WAMP update from 5.0.1 to 5.0.2"

Cheers, Remco




Op 13-nov-2006, om 13:24 heeft Callum Macdonald het volgende geschreven:
> Remco, you're right, I'm confusing package naming with release naming.
>
> The release naming documentation states "The vtigercrm project no  
> longer
> produces Patches
> <http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/PatchSubmission> for
> distribution..." but there is a patch available here:
> http://www.vtiger.com/index.php? 
> option=com_content&task=view&id=30&Itemid=57
>
> Who releases that patch? It's really the name of the patches that I
> think should be simplified, not the naming of the main releases.
>
> Cheers - Callum.
>
> Dhr. R.R. Gerbrands wrote:
>> @ Nicholas,
>>
>> If you find it odd, you might want to wait using vtigercrm as  
>> we're in
>> the process of becoming mature.
>>
>> @ Callum,
>>
>> What you are refering to is not release naming to my idea.
>> But package naming.
>> I think that's a bit confusing for more people,
>> The release naming is still the same, in you example 5.0.2,
>> depending on the target platform is you're suggested packet naming.
>>
>> I can agree with it, yet as our user are no newbee's the naming as
>> stated in: http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/ 
>> ReleaseNaming
>> is enough, I would suggest adding a wiki page for the newbee's who
>> doesn't know what to download instead.
>>
>> Best regards,
>>
>> Remco
>>
>>
>>
>>
>> Op 8-nov-2006, om 6:41 heeft Nicholas Chan het volgende geschreven:
>>
>>> I just found it odd that the naming issue is still being  
>>> discussed till
>>> today. Why isn't the standard set and enforced already?
>>>
>>> Callum Macdonald wrote:
>>>> Hi Guys,
>>>>
>>>> I think the naming of releases should be simplified. I suggest  
>>>> Joomla
>>>> provides a good template to use (with one or two improvements):
>>>> http://forge.joomla.org/sf/frs/do/viewRelease/projects.joomla/ 
>>>> frs.joomla_1_0.1_0_11
>>>>
>>>> vtiger 5 patch 2 and vtiger 5.0.2 are confusing names. It is not  
>>>> clear
>>>> from what version you can apply patch 2, and so on. I suggest we  
>>>> use
>>>> the
>>>> same method as Joomla. When a new version is released (5.0.2)  
>>>> then the
>>>> following files are released:
>>>> vtigercrm-5.0.0-to-5.0.2-patch.zip
>>>> vtigercrm-5.0.1-to-5.0.2-patch.zip
>>>> vtigercrm-5.0.2-full-windows.exe
>>>> vtigercrm-5.0.2-full-linux.bin
>>>> vtigercrm-5.0.2-full-lamp.tgz
>>>>
>>>> <http://prdownloads.sourceforge.net/vtigercrm/vtigercrm-5.0.0- 
>>>> patch2.zip?download>I
>>>> think it's important to include the windows/linux/lamp in the file
>>>> name.
>>>> I know it's obvious from the extension to MOST people, but not to
>>>> everyone.
>>>>
>>>> I also think these files should all be released in the same  
>>>> package in
>>>> sourceforge. In my opinion, splitting the full and patch  
>>>> releases is
>>>> confusing.
>>>>
>>>> I think this is a HUGELY important issue, as important as the  
>>>> recent
>>>> heated debate over the naming of the GA release.
>>>>
>>>> Comments on a postcard...
>>>>
>>>>
>>>> Callum.
>>>> _______________________________________________
>>>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>>
>> Dhr. R.R. Gerbrands
>>
>> Artoge
>>
>> ICT Security & Administration
>> Jachthoornstraat 59
>> 6219 BN  Maastricht
>>
>> kvk 14083961
>> btw 155595106B01
>>
>> t:    +31 43 325 0316
>> m:  +31 6 2127 8082
>> e:   remco at artoge.nl <mailto:remco at artoge.nl>
>> i:    www.artoge.nl
>>
>>
>> --------------------------------------------------------------------- 
>> ---
>>
>> _______________________________________________
>> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061113/a73c5675/attachment-0004.html 

From jamestillman at sevatechnologies.com  Tue Nov 14 06:20:08 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 06:20:08 -0800
Subject: [Vtigercrm-developers] Bug in soap/vtigerolservice.php
Message-ID: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>

The vtiger forums are down, and there is no immediately obvious way to
log bugs for vtiger, so I'm resorting to subscribing to your mailing to
report a bug.
 
Using version 502.
 
On line 754 in soap/vtigerolservice.php, there is this code:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.$account_name."'";

Besides being an invite to a sql-injection attack, this also creates
problems for the Outlook plugin when a contact in Outlook has a company
name with an apostrophe in it, and that contact does not yet exist in
vtiger.  The contact John Smith, with Bob's Pool Hall in the company
name, for example, will create the very unhelpful "Invalid return value
from vtigerCRM" error message when you attempt to sync using the Outlook
plugin.
 
Modifying line 754 to read:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.addslashes($account_name)."'";

while not the best option for a fix, does cause the contact sync to
begin working even with apostrophes in the company name.
 
jpt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/e0d8863f/attachment-0004.html 

From jamestillman at sevatechnologies.com  Tue Nov 14 06:44:32 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 06:44:32 -0800
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
Message-ID: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>

((If someone would fix the forums registration, I'll gladly start
posting these issues on the forums if this is not the correct venue.
Until then, I assume reporting in some way is better than not reporting
at all.))
 
modules/Emails/Emails.php seems to be lacking some key class-level
fields.  Namely, these:
 
var $rel_users_table = "vtiger_salesmanactivityrel";
var $rel_contacts_table = "vtiger_cntactivityrel";
var $rel_serel_table = "vtiger_seactivityrel";

It makes use of these fields in its code, as in the function
set_emails_contact_invitee_relationship(), but they are not set anywhere
in the class.
 
This problem comes to light when you attempt to use the Outlook plugin
to link emails to a vtiger contact.  You get the typical "Invalid return
value from vtigerCRM" error message.
 
I inserted the lines mentioned above at line 38 in Emails.php and
Outlook email linking started to work.
 
Most of the Outlook interaction with vtiger in v502 seems to be sadly
broken out of the box.
 
By the way, anyone thought of improving the Outlook plugin to do
something other than stupidly report that vtiger returned an invalid
response?  Having to use Fiddler or some other HTTP inspection utility
to just to find the PHP error message from vtiger is time-consuming.
 
jpt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/ae70ce49/attachment-0004.html 

From remco at artoge.nl  Tue Nov 14 06:58:53 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 15:58:53 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
Message-ID: <86206992-3704-444F-8FB0-96CF3A4437FB@artoge.nl>

James,

Even the forums, aren't the place to report a bug, instead that  
should be done within Track

First see: community tab.
Gives http://www.vtiger.com/index.php? 
option=com_content&task=view&id=86&Itemid=133

Then bug tracker, you will need a track login.
Gopal is your man to provide you with a login, ask him:  
gopals at vtiger.com

Thanks for reporting any issues,

Best regards, Remco



Op 14-nov-2006, om 15:44 heeft James Tillman het volgende geschreven:

> ((If someone would fix the forums registration, I'll gladly start  
> posting these issues on the forums if this is not the correct  
> venue.  Until then, I assume reporting in some way is better than  
> not reporting at all.))
>
> modules/Emails/Emails.php seems to be lacking some key class-level  
> fields.  Namely, these:
>
> var $rel_users_table = "vtiger_salesmanactivityrel";
> var $rel_contacts_table = "vtiger_cntactivityrel";
> var $rel_serel_table = "vtiger_seactivityrel";
> It makes use of these fields in its code, as in the function  
> set_emails_contact_invitee_relationship(), but they are not set  
> anywhere in the class.
>
> This problem comes to light when you attempt to use the Outlook  
> plugin to link emails to a vtiger contact.  You get the typical  
> "Invalid return value from vtigerCRM" error message.
>
> I inserted the lines mentioned above at line 38 in Emails.php and  
> Outlook email linking started to work.
>
> Most of the Outlook interaction with vtiger in v502 seems to be  
> sadly broken out of the box.
>
> By the way, anyone thought of improving the Outlook plugin to do  
> something other than stupidly report that vtiger returned an  
> invalid response?  Having to use Fiddler or some other HTTP  
> inspection utility to just to find the PHP error message from  
> vtiger is time-consuming.
>
> jpt
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/564d4cad/attachment-0004.html 

From jamestillman at sevatechnologies.com  Tue Nov 14 07:25:50 2006
From: jamestillman at sevatechnologies.com (James Tillman)
Date: Tue, 14 Nov 2006 07:25:50 -0800
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <86206992-3704-444F-8FB0-96CF3A4437FB@artoge.nl>
Message-ID: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>

Thanks, Remco.  I had assumed that the bug tracker was the way to go,
but saw no way to sign up for vTiger's Trac.
 
I clicked on "Bug Tracker" in the Community section and got this page:
 
http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report
 
which has no information on signing up.  Clicking "vTiger Trac" in the
community section is also a dead end for bug reporters, it seems.
 
Did I miss something obvious?
 
By the way, is there any way to search by keyword in Trac?  Not easy to
determine if a bug exists if you have to scan the whole bug database.
 
jpt


________________________________

	From: vtigercrm-developers-bounces at lists.vtigercrm.com
[mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf Of
Dhr. R.R. Gerbrands
	Sent: Tuesday, November 14, 2006 9:59 AM
	To: vtigercrm-developers at lists.vtigercrm.com
	Subject: Re: [Vtigercrm-developers] A bug in
modules/Emails/Emails.php
	
	
	James, 

	Even the forums, aren't the place to report a bug, instead that
should be done within Track

	First see: community tab.
	Gives
http://www.vtiger.com/index.php?option=com_content&task=view&id=86&Itemi
d=133

	Then bug tracker, you will need a track login.
	Gopal is your man to provide you with a login, ask him:
gopals at vtiger.com

	Thanks for reporting any issues,

	Best regards, Remco



	Op 14-nov-2006, om 15:44 heeft James Tillman het volgende
geschreven:


		((If someone would fix the forums registration, I'll
gladly start posting these issues on the forums if this is not the
correct venue.  Until then, I assume reporting in some way is better
than not reporting at all.))
		 
		modules/Emails/Emails.php seems to be lacking some key
class-level fields.  Namely, these:
		 
		var $rel_users_table = "vtiger_salesmanactivityrel";
		var $rel_contacts_table = "vtiger_cntactivityrel";
		var $rel_serel_table = "vtiger_seactivityrel";
		
		It makes use of these fields in its code, as in the
function set_emails_contact_invitee_relationship(), but they are not set
anywhere in the class.
		 
		This problem comes to light when you attempt to use the
Outlook plugin to link emails to a vtiger contact.  You get the typical
"Invalid return value from vtigerCRM" error message.
		 
		I inserted the lines mentioned above at line 38 in
Emails.php and Outlook email linking started to work.
		 
		Most of the Outlook interaction with vtiger in v502
seems to be sadly broken out of the box.
		 
		By the way, anyone thought of improving the Outlook
plugin to do something other than stupidly report that vtiger returned
an invalid response?  Having to use Fiddler or some other HTTP
inspection utility to just to find the PHP error message from vtiger is
time-consuming.
		 
		jpt
		
		_______________________________________________
		Reach hundreds of potential candidates -
http://jobs.vtiger.com 


	
	Dhr. R.R. Gerbrands

	Artoge 

	ICT Security & Administration
	Jachthoornstraat 59
	6219 BN  Maastricht

	kvk 14083961
	btw 155595106B01

	t:    +31 43 325 0316 
	m:  +31 6 2127 8082
	e:   remco at artoge.nl
	i:    www.artoge.nl



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/79c869d9/attachment-0004.html 

From remco at artoge.nl  Tue Nov 14 08:33:25 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 17:33:25 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
Message-ID: <6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>

Hi James,

No, you didn't miss something. Your right, it's not easy to see how  
to report a bug, theseday's something more to-do, if I only had the  
time :-(


Yes you can search within track:
1) on the upper right use: Custom Query
After clicking it:
2) use [Add filter] and
3) select a filter option (includes also Keywords)

Best Regards,

Remco



Op 14-nov-2006, om 16:25 heeft James Tillman het volgende geschreven:

> Thanks, Remco.  I had assumed that the bug tracker was the way to  
> go, but saw no way to sign up for vTiger's Trac.
>
> I clicked on "Bug Tracker" in the Community section and got this page:
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/report
>
> which has no information on signing up.  Clicking "vTiger Trac" in  
> the community section is also a dead end for bug reporters, it seems.
>
> Did I miss something obvious?
>
> By the way, is there any way to search by keyword in Trac?  Not  
> easy to determine if a bug exists if you have to scan the whole bug  
> database.
>
> jpt
>
> From: vtigercrm-developers-bounces at lists.vtigercrm.com  
> [mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf  
> Of Dhr. R.R. Gerbrands
> Sent: Tuesday, November 14, 2006 9:59 AM
> To: vtigercrm-developers at lists.vtigercrm.com
> Subject: Re: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
>
> James,
>
> Even the forums, aren't the place to report a bug, instead that  
> should be done within Track
>
> First see: community tab.
> Gives http://www.vtiger.com/index.php? 
> option=com_content&task=view&id=86&Itemid=133
>
> Then bug tracker, you will need a track login.
> Gopal is your man to provide you with a login, ask him:  
> gopals at vtiger.com
>
> Thanks for reporting any issues,
>
> Best regards, Remco
>
>
>
> Op 14-nov-2006, om 15:44 heeft James Tillman het volgende geschreven:
>
>> ((If someone would fix the forums registration, I'll gladly start  
>> posting these issues on the forums if this is not the correct  
>> venue.  Until then, I assume reporting in some way is better than  
>> not reporting at all.))
>>
>> modules/Emails/Emails.php seems to be lacking some key class-level  
>> fields.  Namely, these:
>>
>> var $rel_users_table = "vtiger_salesmanactivityrel";
>> var $rel_contacts_table = "vtiger_cntactivityrel";
>> var $rel_serel_table = "vtiger_seactivityrel";
>> It makes use of these fields in its code, as in the function  
>> set_emails_contact_invitee_relationship(), but they are not set  
>> anywhere in the class.
>>
>> This problem comes to light when you attempt to use the Outlook  
>> plugin to link emails to a vtiger contact.  You get the typical  
>> "Invalid return value from vtigerCRM" error message.
>>
>> I inserted the lines mentioned above at line 38 in Emails.php and  
>> Outlook email linking started to work.
>>
>> Most of the Outlook interaction with vtiger in v502 seems to be  
>> sadly broken out of the box.
>>
>> By the way, anyone thought of improving the Outlook plugin to do  
>> something other than stupidly report that vtiger returned an  
>> invalid response?  Having to use Fiddler or some other HTTP  
>> inspection utility to just to find the PHP error message from  
>> vtiger is time-consuming.
>>
>> jpt
> Reach hundreds of potential candidates - http://jobs.vtiger.com

Dhr. R.R. Gerbrands

Artoge

ICT Security & Administration
Jachthoornstraat 59
6219 BN  Maastricht

kvk 14083961
btw 155595106B01

t:    +31 43 325 0316
m:  +31 6 2127 8082
e:   remco at artoge.nl
i:    www.artoge.nl


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/ef6bad09/attachment-0004.html 

From jtk at yahoo.com  Tue Nov 14 10:49:47 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Tue, 14 Nov 2006 13:49:47 -0500
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
Message-ID: <pan.2006.11.14.18.49.47.164625@yahoo.com>

Dhr. R.R. Gerbrands wrote:
> Your right, it's not easy to see how to report a bug, theseday's
> something more to-do, if I only had the time :-(

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart

now links to

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets

which links to

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess



From joestewart at users.sourceforge.net  Tue Nov 14 11:09:57 2006
From: joestewart at users.sourceforge.net (Joe Stewart)
Date: Tue, 14 Nov 2006 13:09:57 -0600
Subject: [Vtigercrm-developers] trac Account Manager Plugin
In-Reply-To: <pan.2006.11.14.18.49.47.164625@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
Message-ID: <455A1485.3090109@users.sourceforge.net>

on 11/14/2006 12:49 PM Jeff Kowalczyk said the following:
> Dhr. R.R. Gerbrands wrote:
>   
>> Your right, it's not easy to see how to report a bug, theseday's
>> something more to-do, if I only had the time :-(
>>     
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart
>
> now links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets
>
> which links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess
>
>   

Just a side note.  There is now an Account Manager Plugin for trac that 
allows users to register for an account:

http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin

Joe


From remco at artoge.nl  Tue Nov 14 11:26:49 2006
From: remco at artoge.nl (Dhr. R.R. Gerbrands)
Date: Tue, 14 Nov 2006 20:26:49 +0100
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <pan.2006.11.14.18.49.47.164625@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
Message-ID: <314E9A1B-3A8C-4EE8-8B59-E2749627A2D8@artoge.nl>

Thanks, Jeff :-)

remco

Op 14-nov-2006, om 19:49 heeft Jeff Kowalczyk het volgende geschreven:

> Dhr. R.R. Gerbrands wrote:
>> Your right, it's not easy to see how to report a bug, theseday's
>> something more to-do, if I only had the time :-(
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/WikiStart
>
> now links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/UsingTracTickets
>
> which links to
>
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/wiki/RequestingTracAccess
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061114/e739431f/attachment-0004.html 

From jtk at yahoo.com  Tue Nov 14 12:38:16 2006
From: jtk at yahoo.com (Jeff Kowalczyk)
Date: Tue, 14 Nov 2006 15:38:16 -0500
Subject: [Vtigercrm-developers] trac Account Manager Plugin
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<6F66BAF6-20C0-4173-A923-A93825E30121@artoge.nl>
	<pan.2006.11.14.18.49.47.164625@yahoo.com>
	<455A1485.3090109@users.sourceforge.net>
Message-ID: <pan.2006.11.14.20.38.15.301337@yahoo.com>

Joe Stewart wrote:
> Just a side note.  There is now an Account Manager Plugin for trac that
> allows users to register for an account:
> 
> http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin

That, and the WebAdmin plugin, which will eventually be part of Trac core:
http://trac.edgewall.org/wiki/WebAdmin

Trac is currently at release trac-0.10.2, BTW. We're running trac.0.9.5.



From jeri at vtiger.com  Tue Nov 14 22:28:51 2006
From: jeri at vtiger.com (Jeri John)
Date: Wed, 15 Nov 2006 11:58:51 +0530
Subject: [Vtigercrm-developers] Bug in soap/vtigerolservice.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D489251@EXVBE012-5.exch012.intermedia.net>
Message-ID: <10eea4db828.-8020503555403603074.-7158338222294584874@@vtiger.com>


Dear James,
              Thanks for your fix.We have integrated this and checked in to SVN.
The revision is 9840.

Thanks & Regards,
Jerry.


---- On Tue, 14 Nov 2006 James Tillman <jamestillman at sevatechnologies.com> wrote ---- 

The vtiger forums are down, and there is no immediately obvious way to log bugs for vtiger, so I'm resorting to subscribing to your mailing to report a bug.
 
Using version 502.
 
On line 754 in soap/vtigerolservice.php, there is this code:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.$account_name."'";

Besides being an invite to a sql-injection attack, this also creates problems for the Outlook plugin when a contact in Outlook has a company name with an apostrophe in it, and that contact does not yet exist in vtiger.  The contact John Smith, with Bob's Pool Hall in the company name, for example, will create the very unhelpful "Invalid return value from vtigerCRM" error message when you attempt to sync using the Outlook plugin.
 
Modifying line 754 to read:
 
        $query = "select vtiger_account.accountname
accountname,vtiger_account.accountid accountid from vtiger_account inner
join vtiger_crmentity on vtiger_crmentity.crmid=vtiger_account.accountid
where vtiger_crmentity.deleted=0 and vtiger_account.accountname='"
.addslashes($account_name)."'";

while not the best option for a fix, does cause the contact sync to begin working even with apostrophes in the company name.
 
jpt

_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061115/32ed6281/attachment-0004.html 

From fboudra at gmail.com  Wed Nov 15 02:14:40 2006
From: fboudra at gmail.com (Fathi Boudra)
Date: Wed, 15 Nov 2006 11:14:40 +0100
Subject: [Vtigercrm-developers] trac Account Manager Plugin
In-Reply-To: <pan.2006.11.14.20.38.15.301337@yahoo.com>
References: <479348D61212AC4DB31C9906F8C7028D48926B@EXVBE012-5.exch012.intermedia.net>
	<455A1485.3090109@users.sourceforge.net>
	<pan.2006.11.14.20.38.15.301337@yahoo.com>
Message-ID: <200611151114.40395.fboudra@gmail.com>

Le mardi 14 novembre 2006 21:38, Jeff Kowalczyk a ?crit :
> Joe Stewart wrote:
> > Just a side note.  There is now an Account Manager Plugin for trac that
> > allows users to register for an account:
> >
> > http://trac-hacks.org/wiki/AccountManagerPlugin#AccountManagerPlugin
>
> That, and the WebAdmin plugin, which will eventually be part of Trac core:
> http://trac.edgewall.org/wiki/WebAdmin

Web admin plugin is already installed. are you interested by adding 
AccountManagerPlugin if it isn't a duplication of webadmin in terms of 
functionnality ?

> Trac is currently at release trac-0.10.2, BTW. We're running trac.0.9.5.

in TODO list concerning infrastructure:
* update gforge
* update trac

just, i lack of time atm. We'll do asap.

cheers,

Fathi



From jens at Strawberry.COM  Wed Nov 15 03:40:42 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Wed, 15 Nov 2006 12:40:42 +0100
Subject: [Vtigercrm-developers] [FEATURE REQUEST] Support Multiple
	SalesOffices
In-Reply-To: <20060825232016.F13092@Strawberry.COM>;
	from Jens Hamisch on Fri, Aug 25, 2006 at 11:20:17PM +0200
References: <3E26E7A199CABA49822B3E6B741434F97D0914@exch.accuratetechnologies.com>
	<20060817165659.B21264@Strawberry.COM>
	<20060818091439.U2464@Strawberry.COM>
	<20060825232016.F13092@Strawberry.COM>
Message-ID: <20061115124042.D4158@Strawberry.COM>



Hi Dennis,
hi *,


it took a while to check everything out and finally to upload
my changes to the SVN, but now I finally managed to do it.
The feature branch 5.1_jens now contains a copy of 5.0.2 plus
the following changes:

    FCR 2035 - Multi Organization and Organization Units support
    Postgres 8.1 support (5.0.2 does not contain all required
	patches)
    FormLetter support (Campaign reports may utilize the contacts
	as secondry table to generate a list of addresses to be
	used as form letter database in openoffice/staroffice/etc)
    Some bugfixes regarding vtiger 5.0.2 
    Account-Contacts filter on SalesOrder-, PurchaseOrder-, Quote-
	and Invoice-Popups): If an account is specified, the popup
	shows only tho contacts related to that account. May be over-
	ridden in the popup).

This version is based on vtiger 5.0.2.
It is almost a snapshot of my working vtiger copy.
It runs stable in the following environment:

    Solaris 10 (Sparc 64 bit)
    Apache 2.2.2
    PHP 5.1.4
    Postgres 8.1.2 (with perl 5.8.7 backend)

It is currently available on SVN only

    svn checkout http://vtiger.fosslabs.com/svn/vtiger/vtigercrm/branches/5.1_jens


The branch also consists of a SQL-Script to migrate an existing database
from 5.0.2 to 5.1_jens:  schema/502To51Jens.sql
This script offers the opportunity to use 5.1_jens on an existing database.
However, I strongly advise to produce and save a backup before doing so.

You may also start on an empty database using the usual installation
prodcedure.

If you start from scratch and populate the database with your entities
(e.g. using a SQL dump from your productive database), you'll have to
adjust the organization assignment before using the database as follows:

    INSERT INTO vtiger_entity2org
	SELECT 'vtiger', crmid, '1' FROM vtiger_crmentity;

Replace 'vtiger' by your organizationname in this case.


I'd appreciate any comments on my addons.

Kind regards,
Jens




On Fri, Aug 25, 2006 at 11:20:17PM +0200, Jens Hamisch wrote:
> Hi Dennis,
> hi *,
> 
> I've opened a feature change request in trac on this: #2035.
> Attached please find a proposal describing the required database
> and GUI changes.
> 
> I'm on vacation for the next 2 weeks, so IMHO I could start
> working on this enhancement based on the GA aftar my return.
> 
> 
> Kind regards
> Jens
> 
> 
> 
> On Fri, Aug 18, 2006 at 09:14:39AM +0200, Jens Hamisch wrote:
> > 
> > Hi Dennis,
> > hi *,
> > 
> > 
> > I'd like to post a proposal for an implementation of this feature.
> > In advance there's one item unclear to me:
> > 
> >     What is the "official" procedure to add items to the
> >     vtiger_tab and vtiger_field tables?
> > 
> > As I'd  suggest the introduction of new tables, there should be a
> > new table identifier on those. I'd like to ensure not to get into
> > conflict with other addons and the ongoing process from RC to GA.
> > So how do I "reserve" unique table ids? And is there a space for
> > private tables (if someone adds private stuff)?
> > 
> > 
> > Jens
> > On Thu, Aug 17, 2006 at 04:56:59PM +0200, Jens Hamisch wrote:
> > > Hi,
> > > 
> > > > I also agree that there may be a default sales office for
> > > > sub-organizations, but I don't thing that sub-organizations is a
> > > > prerequisite for having multiple sales offices.
> > > 
> > > yes ...
> > > 
> > > The problem I have, that I need support for more than one entire
> > > organization. So my point of introducing organizational units was
> > > to split this off the organization table. The wording doesn't matter
> > > at a first glance. A 'sales office' or 'location' would just be
> > > some abstract part of an organization.
> > > 
> > > > Jens, are you going to work on this?
> > > 
> > > Yeah.
> > > 
> > > > I'm going to be offline for a week (military exercise) so I won't be
> > > > able to work on it for a little bit.
> > > 
> > > Have fun!
> > > I hope to able to present something to you ehen you'll be online again.
> > > 
> > > -- Jens
> > > 
> > > --------------------------------------------------------------------------------
> > >      /
> > >  +##+|##+   STRAWBERRY                     Jens Hamisch
> > > +v#+v v##+  EDV-Systeme GmbH               Managing director
> > > / v    v\v
> > > | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> > > |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
> > >  | .     |                                 Fax:          (+49 8171) 41805-59
> > >  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
> > >   \____/    Strawberry at Strawberry.COM      
> > > 
> > > _______________________________________________
> > > Get started with creating presentations online - http://zohoshow.com?vt 
> > 
> > -- 
> > 
> > --------------------------------------------------------------------------------
> >      /
> >  +##+|##+   STRAWBERRY                     Jens Hamisch
> > +v#+v v##+  EDV-Systeme GmbH               Managing director
> > / v    v\v
> > | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> > |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
> >  | .     |                                 Fax:          (+49 8171) 41805-59
> >  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
> >   \____/    Strawberry at Strawberry.COM      
> > 
> > _______________________________________________
> > Get started with creating presentations online - http://zohoshow.com?vt 
> 
> -- 
> 
> --------------------------------------------------------------------------------
>      /
>  +##+|##+   STRAWBERRY                     Jens Hamisch
> +v#+v v##+  EDV-Systeme GmbH               Managing director
> / v    v\v
> | . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
> |     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
>  | .     |                                 Fax:          (+49 8171) 41805-59
>  \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
>   \____/    Strawberry at Strawberry.COM      
> 

> %PDF-1.4
> %????
> 1 0 obj
> << /Length 2 0 R
>    /Filter /FlateDecode
> >>
> stream
> x??Y??\'?_i???\L??#E?v??^?]?/??U5S?????g&?V???V????m??H????_B
> y?"Zu??m??U??F?Y~??O???=???ya%`^~??WB)??Q??J?????wJ
~|+???I_?7?)??<?O??<O?f?<N?f
??v
> U?|$?*??|???*???gX???????'????BSb??k?a????/+?mO???u?????
?x??(
?
???????B??0?W\??g?
1J
?h?T?iH?gZ?g???5y?,1d?o???"?dP???????eR5+?*1W~????3?C?X?Y?\S?G??lWft??$}k????L????M?${?
??9?????6P?
?
?WK???Z{?6???F
??
??pC?E
K?y
t???}|C~???C?`1F?S?QF?A?? ???r?56?L???F?
> ?_A?m`D?
???v|?u|P????_???F0??Kl\??8F?o??zV;k??$?(?m_?qC*??????)
XJ??)??@?=?$?????????5?y?M?w?pWv
?/|?Jy???[???$??W?O??#%??x?):??eU?????T??H0?Zxx??JKOu???C?mJ"???????H???`X}11?.E??g??X??w ?
???j???Y??"!?Tkh?.???	FVNxV:?uge??ov*]?'?L)JR???P???????Y?d
???pX??l??s???oB=Pf?RV4&??d
??[JH??K@????X?u?)????y????K?S????9??
??j?
\?F`s
8?46&
??S???????2?Ru???Ba/#???F11b???{?????!2<?s????n????????iP
??d????
z6=0)??z?xdW?[.Il??b???iu????????O???#?<??M?|
N??r???\???9H???????T?????????d3?]??U
?-????+??2I?<???.?u?5??-j??????Z?I@?|?~M????Z$?"??&S??a=?q,?Zc???R0?\j?e????_]??ia??-??|?CQ?>?wR??????J?/?BB}???phOe?????<3?R??????^?*Fn? ?`??I?4??X???)U?5?un>??1?cY
b???,?D>??	?????`=B/U??o??1/?d<}?5???T3?w^??
?n2c?-???x?;?
|0y=
o???zt?wC?
?????_>?kx?Mcl?y??
Y&3_???:????i?????9???I(j??1?????o
?Mo?e???t?2??ve?G??{?l-?Du????r?????HS
LJ?h?sF??&S+????P?F5CK?:?;???8nT-4???6?WP??z?X?????9mh8??s????
V?J?}??5????P?w?=%??7{J??T???????.=^%J??'??????I[??(?>wIR?p
> ?r?W:J[??5?
??<v&??P
3Y???:???????E&??l?+Q???????TFK?9f?6k??L?s??*???w????l??cT?????/1???Do???f?r1?
?W?B?K????????no??
1??;?9[ZFv??^???2*?9?e??U?-??*?2QV???g??J?&????lb????}??????.?_}
{?>????????8??T????????x??
endstream
> endobj
> 
> 2 0 obj
>   1713
> endobj
> 
> 4 0 obj
> << /Length 5 0 R
>    /Filter /FlateDecode
>    /Length1 9796
> >>
> stream
> x??z{|T???Z{???={?{&?d?0&<?0I?0	?C#??@F'O????p?"	???9
j-z????p?`??z?h=???U???Xs????:???=CDk?????????;?^?z?{/?????E;A???5mO?
>??)B?X??KJ????_????a??
??!r!??aSO??A?&??/!d???PSo?~?U?2v?s??A??X
?SP??is??;?T?
?;P???????P=??&?/?\s???
????fs????!??????????f???????u4??????m1oB??>Z at yZg??
> ?J?????h0?????Hs?gd?$??????O??u#?7???d???_~??????e
> ????.?J???2?
?i??h???h???|??[
o?h??<????d1z?@???It
???:?6t?`z?=t<f?S?	u1G?
Z?j?m??^F????ss
> f???r}?rfzgL?65;?6?????Hw?9?6??l2DA??j?*???X?`4???*?9^?????I???Z??,?Sw?2???I?_?g|??9Y?3???2???t?c???2??9??.??vJM*?o??6?
???a???#J????)???4?E?E
?????Z?0?v?-?2????;? ?.gf???1Y?Zb??0 ???????95q~??]???LI??E1
???
????tl???=?DT?j?=?5?????"Y?Mk(K)?????'?H?M??????)_?b??????ZT9?>???,???%0b????d???,?????{???[{??[UUe?K=? ,V?RG??rf&??b@}?
??RC?,m??dZ??4?CK?@05??Q?????????????b?5r??????[\?jJ
?
V?	/?r'??|U?"J??f?3)???p?JovJ??;`??T'???J?K?
s?`?\Yy?Uf?9+?e?
i??(???????R?j????#??y????e
?l0<XsjbG?G=???/l+
????0????!g?lOUL7?y?{?
e?*??nC??j??*?????
.??
????T?%`???*'????kO?T?@q???Sl?<j?;??E)????9t*?j??qwe?.?Z?q?yA
a?s?f?e-??q?grz???(?TKL?=?'?VSi?????
???iQ%q2UI?q???`?E1??i?A??????q???EU?h@??????u?R???$[?'E?Z? ?(???6d?C??;8?gZ"@ ??&??z??zdj??
> '"*?????}??x</??7???3????q?????=`????X_?u??N??gf?
AZ3?)&?!v:Q}P#f
> B?Z,

?
?W?1??-?cd?a??1??H??-kI???F?f??K	???????????*?????7?#>???????m?????L??.?m??-Y??l???{??{ql?3?c/???????G?k????~i??m???~??=o`?z?b???4K???p#?
t?QA????J?	!?QP??~?3?
?M@]???8*.*.??J??2??o?Z
?l?A
%l??????DEC??3d?{??o??e?{{????g`??u?"??AW?bzZ?E???????N??q6???w?8?=??e?r?J<5?YP?? ?JO??";?6????9`
> ?
??dE
????!:??MA?
z?F???0DE??g~/??L?8??
??2???
??x:??;???|?!????n?zQ?\)
7?
> 
	y??Y^}D???(?????=?J?b?P?X?V
?TbkV~7P???2???
~zC?????????U;J.?Y4w??????U-?V?X??%???????a??~?????jP~0??'?{??Z??J?(???2't*?W?C?,?D??J?HV??????l???_|r?21?.1??S\w? ?r`?:YRq#/?/O[??1m{?Pgry\?L?HX!T,??#?3?b?ff???????L?x???S??L??t??)???9.??]?=?`,:
S?w?????wDV?Q????)????????o?(?T???e???B!l0????????@?`6(]
?u&C
> ?r???\??e?O??tE?;"???
???????\??
V?1?
fz????:-?z]o?????????J?N???	6????-\
> \?
?'GP&?,?bq????R?_?W8?Q?2"V?Q???K?E,?Z??o?b?~?12?????F??4????v??
@@q?x!???	??
6qQQ^.?S&-??????e?v??H??U?
?-8qb??h???????{+??'??z?gvI????={??????;??\?A}VpN?

t?????`?Q+?^?JE?(H?U???!!(0BR?)e????S??&?G???93???'8???????3nOD?h?Zz'??t?????,?l
 j?zCm??]Pg?t*?1	#*q
???d/5?5??=?n?3F??6????C???P	?? [c^n??B??N????wG?51??O???
???????o??????jg??*??k???~?????L?e?Y+??VT???~????7?6'-Jv{?b1??/G?J&??"??????[r??????	0??C?O???6l_?4??????9?????r?p??4???6c??.?N?L?????6#?4????z?H????d23I
????K??:S?
??d?<^?U???O???m?G?1??jN????C???H+?%?5??}\?9?b>?.?????B?B_?12?????H?????????????c*??R?????}?G_???H??j%?	?<?^???{????-?$q??_={v[?????_~?s?#???v??????????m55???4??k??M?Pv???~?3?a"!??|??p??p?6??{?q!?????I?=?#???G	?%?PmUN?@|??e??`?z???0?C+??????1??BX30?0&v,?bR
???"???r??|! '?3R???0?E.?(?O??z?P|?8??????/g?y?r
? {
?????sq?8?Z?-Sp^?%???0o?
#?	?6?(????u??? b?U
U??:????'??????x?@Va?Aa1???`6?(??????|?xU?9???kW7????I?G????
??s?>?c?C?????VO?
&?
??w?9?p?+?1???:S???(???,\)??[ko?r??t???1=???@I/?8jI?P?P>?8N?'D?9?Jnds?
?+??j??UIJ??
> ?t?{?z??u?3??,???"?yB?{c8??y?z?G????~t??
l?z???????c?5D?$????v?mh~p?xl^s??R*,?T?*U#iV)-+???C?8??'?????Dh<?|?L	D????d1#?????,??????????!??z?
> ?s?#\?x
??hL\?w#
?y?h??%~v?????????>??{?5??????m?:#p]5??????????2?	*p?G?9?-

?A??k?z??
m?????;I???jzj?????.????{
?By?=l-s5?6?m?n?2?7?i??f?l?b??F???h?
??Z7?<?jsd0?|2?%?u?M?8_T??E6l?e?

?u???? ???`zTB?(??????????C??O:#?

> !?Cv%?0ZvJ~??XT?e???x?T7x
?NY??????l<?K}!w???????g??X??o????j??\???o~]}??+?bYS??+74?TwC??????????u??-?
> s????SK??O????s??????7??-	??di???s??Kn?M?g?.?*P ???	\?x3X	3??,0<?CA
?c>?M?1>???m?-^b????_?
?*?G??????
d???
> dA??fn??j???????j????M?	6ee
??2??x???r
??2)H?f1?+?'????????N?b{????????%???a
TE??`+&??n?_????m???g?#H4???a?lLk
u?%/9???,?XP??dwE?F???v????7?5??????;~=td`??????o_}%?'????;x???=?3z?RW?E??j??????0?).T6)YV?R5??`???1????P??}
> dV(?/y?
> bCx
?
?T?$
B,Ks???!????vSN??r!
\*?
???!n?
'?T?e?_=!?*???????Q| Q????<P??????S?Ieb
?????:?`%FaT%"???3h?Cy?y|2???&	??
??
8?m?????db?O7???Mk?y??e3??F?
f??
> ???m????^9K]?
?/??)A?J?D?D?B??	B??????x?!??A?F^&BD??Z???c.???e?(e??k?g?,<??Om{??Om?l?<????3??&??N???Y?0?????????s
> ??At\?n???~?0z?(L1?????Uf?
?7^?1B???C????I?*N??P273?z?=?d?"='??:?n??V?<?D????G:!g???"????M?);??N????>'u?I?r?'U????'?<??3'
?V??~??G
> =?????9???6W?????Jx/a^2?.?Y?Y?/?y??_?s??%o??	vp?????B at uj???R@??????0~?`2&d?Vaw:3??F?Z??
#>@??,acI??	?j???A?eOz????%?Y?B??J?~??K+??????????ujA?{???#=?<???/?~?z?????????fY?=?my??j5?~I???ucz?7?j?]4
??u/?????sU??a?F?4?C??8?3 ?????A?&??+??6?Q????4+??x???t????+???H?YqQ?H???[???-
???????Yx??iW<xb'??s?q????????q0??K?????j??J?R?b?]h??&
?B?C0?T?458???^?{Q??U*H<??*
a#?? )??
,	5?"?(|6???CrK
??U??P)??b?????????_?G??c??k?~<z-?^??p4???c???
?,q??_N\JF??K??=8????'2[5[??%
kd%T????ZD??E??Y8?vUj8??W)?<
?g??0???
> 
1?h?j???
> V?h??"\???*??!?!??
?W??,?X????O P???2??9???C
????7?s???:s?Z?kr???$_?&???&.&Z
> ?$n?O4^??G????L_??
??????A?P?
??????X?#HfA??#`?$???Y?1???	??1?????rp???
> ?????7???"?z?? ??$?M??????@n??k$c??c?3o??$?#????c?	E?G??oe?????7X??v)?+'B?????
Ekb?-?Ea?????&f?????F??a
> !??
?????_@???I?
J?b???(??GQ5???0?
> dc???\?f???gFQ??@???v
k#K????'?cA????_p??e??^???&??	????>???{?a~!?????X?Q?@qU9MY???JS?R???)=h
?l? "??Q@
???F{E??I^????8???
?S8A.???????p????p
??!
+???;?*X????1?37R8??D??	ZH?R8???2
sh6iK?<?????N-n???????^??????Z?z:?74uIk????[Z?z??E?
m?
5]??[?????
???n??I?GwJ

?

[?gIK??uu???CRs?T#uu??7l???(?6??U???\?$m???j`?
??]

@U??????????????::?s??6??5?6to???\8G??WJu??V???I?????W??y???hs?(:h????????m???P=?j?^X
jEm?u?????Ze?+?o@???-???
8???+???
> ??C9)??????&x?[???k
P6@?U???\#?cW??[????????.y?z????ZQ??????p?&??j=P??3(e?]?d???j?g??-?g?z????	c?j7??????i(}k?*y?n??g?K?s??????f??q2?????zrSk?L?6??I???\??Jt
??Kh??????|???w\???)~?????w????????{??B?"????m?????w?%??x?N?N2???}????a<2Z??????%?|W???H??{?]???{????|W???|W?7?%??z????^?y?5?[???Vg?5??????YO)Q?????jK??jsnjul?bun?????b????fKzc?????hh2;?????X???q?}?{
?v?D
?z
"?OT+]?????}???G??
0P?t?D
???
??Q?j
?C???j??
> ??
???JW =|*?
?}??R`1??~?6?????????Y??9??~?t!{???,a?G/?
L??????;?t?Mg4?u?h?juz-??C?L^????B??u?W??yJ)T??\????c??h????	C??$??.????{???????0~?
> Zc?C??c:?@a\?n}?)?????O???????TYU????/_]k????S???*H???{Q?H?I=?4?Z???6%??1=@?????/Gt????????n????Q
> endstream
> endobj
> 
> 5 0 obj
> 6721
> endobj
> 
> 6 0 obj
> << /Type /FontDescriptor
>    /FontName /CAAAAA+GillSansMT
>    /Flags 4
>    /FontBBox [ -161 -229 1040 916 ]
>    /ItalicAngle 0
>    /Ascent 929
>    /Descent -230
>    /CapHeight 916
>    /StemV 80
>    /FontFile2 4 0 R
> >>
> endobj
> 
> 7 0 obj
> << /Length 383
>    /Filter /FlateDecode >>
> stream
> x?]??n?0E?H??????)BJ?F????LR?? ?,??
{iUu:??x?=?f????W??o?Bzul\???^}%? ??
?6?n?????e??_?.???????*?????K?oj?????a????wR??M????u_r??8?\?r
k>??sy!?~_M?????:Q???Um-??????$a???\?v?<???w??Y?c?Y?1Z?q??? ??# ?0????`??
??$,
k?=X`H[??<r??w;??	hG?'??IQ@??}2???
h??0??}Rt?'?M>}4}2
:??4}??M?]?X0??h???.????8?3F?w?????a?18??4N~??k;?M?oP??endstream
> endobj
> 
> 8 0 obj
> << /Type /Font
>    /Subtype /TrueType
>    /BaseFont /CAAAAA+GillSansMT
>    /FirstChar 0
>    /LastChar 34
>    /Widths [ 1000 250 479 500 384 277 729 426
>      770 219 437 500 500 280 500 500
>      500 500 823 395 426 416 333 551
>      666 509 219 323 500 323 458 250
>      500 719 437 ]
>    /FontDescriptor 6 0 R
>    /ToUnicode 7 0 R
> >>
> endobj
> 
> 9 0 obj
> << /Length 10 0 R
>    /Filter /FlateDecode
>    /Length1 9292
> >>
> stream
> x??:{|?U??~?$????N??|i(CI???j5?/???R?E?I???<Z??K?L????*?:??
?t??@??3?"??:+???(?3B???_Buw~???????{????9?:???H?6"VE??}w???_!?

?w????A??x??m????\0!D?!??|???9ew?!?L d??
?4
> g6+r??

???h?@?
hOm^?y??VM?C{?????????D(#???"w??k?e??mqudUt?R???1?m?
?1???kok??=?????A??
?0|?G(G????B?JSk?:^??&??j??;22?8EW???a?R???F?g??]?/M???@????^????5?????#4??yY?/??>?~?????i???a??????????~'??V???K???_
??y?
????F???8
E?VlD?P?P?????
> f?}?y???3<WN?"gZ?Tw?KtN??p??mV??d4?^????TJ?24
?????
?+<??U??j?_?N?????2\6???E_kg~?=e?}C????r??!T?N??@?l\'?U4??+b	{Yc8+????????"E???:??]M?????
Us???k??P?W
??R?;#a?$??
> -??@w9?#?/G?'?m???e?0c?	?,???c?`$??C3??o
P}??it7F???"@?!DgW4?9V7?	6????b?????9??
V}k?t??j?\?
	?	?'q
????????I???OL??????.R???????
> 7l?U??+6o??$O)
4?[??-BgE????i?*? O?h?D??????FwEc??4?{Y"X#W?fI?? ???.???#?<.?s%
=???????;?j??	?z?????H(?
6H?
bU??a?lRDg????????0???rU???b??(?????.???z?l?sD?Jwe????-V???#???????4~[EN??
U?G
???u	!???????
8\??K??KM&????
)????
> ??jj]"???:????5?'kbH`??A?)?EgO??,
?\?:???
??7?&?"?w<??^?#LF?]1?LF6^?\
v?)??0jN(?M????X?|U[???hr<a,??
T]?
4??<p?KV?Wx?A	/??'??
s????
<??"????????V??Ir?(r?Ap??B.?K?
??/6??F?F??\M|?
/????0?q'6???e??4e?i?e
l6KY?b??8??N??0???
A"??V?a??
O?n?{h????v?7d(.??@I?P(??	??3=}??????*?O
???????;w?/???????b
?w?-:??i???v1g _

?Z??z?4???<O
?x%?P? ????;^????~??K?>/
> ????<lv?M????????????]??
?KW|/~?X
???K?+o*:}???x?*|D:
?Zd?}H?x47??
> Z,E???P??????V??????\??j??N???h??A
????W{?????
> gQ y<?y?Y
~D)BzZ.+?????X:??%???'???f?4??P?@
?H0??`???????
??E??VW???ZmRc?Z?C?TZ?(gH?sI?Z?Cz?+?k??lN??ly?:
????af??&?`?d?,R?"?`?l???B?????d2???b???74???(?;?cc????t?b?g????C!?7????&???Z0?h
(
> ??,2??A??F??M:?k??JO{f?M?????:?.???1??????????H?m????N??Z????i?;]????oh???Yu?9???[^L4?????+???????k??D?&>ffB??GT?[???????AH???
?`P	???L?j
T	????k??J???Q?p~?? ???0|d??????<???P?,??!
?la?4wc:p?o?+?v????_?z??G?x???'p??
X??W?Ez???~??(??^0?}@#?2??B?3??ax???u#?p
N?|???~??g????Q???MWwT?.]?M:M'?O?k????	??L?
> ?0x?G??-? ?T)?-???F?F?]???<uP???S???VA??w?Vd??KDz
?D??p????J_H??J???????k??7?????+O????}8???N????#?M??\?<?
?????4?BqR?f?h???+8?q?d?k??F?7v ?????q4g????i?TX?r

?c???b?V?q?0?v?P%}:??X???.r??5?????1??
??Pm?K??<U+m?????F?A?t?v?	????????
???W??b???/Zx??(p??.4hs?F?WO%??i4??
> ?R	Z?P3i?Q???XR?ME??????d{?t?F?M?BBs4??IK{L+?????p?B?R@6p??`???MK?xY(]?>????R_???x?V??b?n????/??[?k???<8??}???6???v+M?!???V?????=^f?&???????%?t??
?|?s
> R??????{?9ob?4???}??%????y7?]???E????>?/-i?	??'c@?????&
?q?[e???????W?7Z?~^,6?????c?67?M-????}?y??????????|/=l7????*J??M8?1?J`_??????????B=!??B???O?tv
???,???7???IwI??O???\
k?????????%?????w??8??,?4??PT`??nf????|????S'??i:N??4?n?G??????O??o?????AT??????6????g'F??I??m?D:r??d??)?Z?????????K?U??C4?5?0??*M?^??6#C??`???GN?I9{??N?B$???M?^pq%B???q,?x?
9??*?.??E????epIW?v??5??=?w????v?????????6
??????.niX?~???????Fui??Y??????Ga??|?????
?*?m??
?????{??M\;"_???Ia??&?e?X?i?xo???
> ??8?u?tO_??e]O?M Xn????g????e??+?yUl?2V????t3???`)?X??A(,S??"???????xI???M%3C???Z??*_T2?B???b?Z-8h?Y%???,M?"A@c??ac?0?5?C?</???$???`M? ?M?????f??)I?!??DZk?lIz??g???MJ??
???,???h?A?H??n(g?
?}4s`??\<c?????||?=??m?????|?1{????????t????[6?	????p?\?7h????T??????t;????Z#?:(2?W
> ????Fz???+?*F???F???v#???4?n?;??,?????i????)?i??'\??
g???*?f
> &H??O?I?f??YS?0+?~???
> 
????E?xn???^??N<?Y???:??wf]1????-???.[?i?
m?G????j???`f??o????
=!O@??'??&?Z?????k??????<??J{????? ??????????Y???????k?????^8?!&_????N|LOSi^%?4Q0?<b?|\1?kA.2???R@???n|?,???^?g6<??????z?4?}?????D9F?
H???e???n????*JT(l???4?1e2y?P?5?????7?pfl??2F?<Cg??J%????$%TX')??$?R??:?Y?'??uT:????f??????$?Y????_>0??????w?A????;?	
????V???+?;?FC???? ?,?Bc?'??o?$?jJ"8????bFX?gqhmp????4?z????x|;?@?K3?+,gbY??
> F&??!<?(?3
?(??,???h{SO'???N??u

> ?d??.v????kO>???n0???+??x-????	?h&????=???1?w?w<?O?2?4???{??RphV
o???Y3?
!$??z????{UG?I'?et????k??b?U?:.?~y?C?e????/7u??H?{a??_?????9??o????z?_/?)???h0????7????J??+??.??????10a?O?\_??{;~!??k"6????G??S?????
a?9?'?)Pqp
> ?AI?P????<??X

> P`?!?
Q??pJ?$6c?
???n)??X??????q????????T??y???;(???*?4?
> ?@?K?`???? ??Td??P? +?M???+????????<?N?$?n!9??;??RIb?&=?/?n???(????ts[??????z`?2l????P????
?S?g?]??????A???) N?_???QD???4E?2$?{<???????dS?O?Q???A?mw?
N(}??3??U3q??p???@?
????&?????
H?`^?h?c at d? ??8t???????m(??Cm??Z)?(??kBr??"W?1?o???f?n|??????m?Er`YK?A?^?Vo
Q_J3<X??W??	?PW???#F???s?y?????A?y???y????L$????z?>????[?????????uRK.V?????A\4?`p?i;e?7??1Q?_Q??KH?k?4yT??J?(?ZC?19?_?
IC*(D?????????h?n??
?>????1)?3??r????\V}?A?
id\?????L=?;bu???T2?k
:?77s??N?y/?t????)???????d????????????R5?+{?Z??DuT????????
y?9??k???7$??m
~u_?9R'9p?Uo^??`??4]???<U?w+y??U????P|?w????p??Ny?f1*fZ?z?R???<(???=
> ???0?
?%\??P9s??a>?2???v???$?3!xaN?c???
????
???\??????Z?&?.?Q
@?{???
??????^Ao???'?f? `?`?q??F?q
B???QlS<?xYiW^????y?????t?"b(??
y? ????EF??IY?L??+t$
Sp!??i??N?p???)?
????!

UW???	?06???wR8F6??)?BJZH?4?M?R8??????Yt{
> ???????-?-?u???6??????????=???S?i??[W?v?k??e??m????X?j1??8???????+Eyv??
????
m?)^??E??
??X?;?#??U??bk?????XC??*?N???f?c
??v?*?Zl??wF?n?j?u4????????kJ[W6N??+~uH$c??X
m? ??f???
pj~??Y!?Jf.???l??.3?
,v9@'??(???v??emh
j?g5C??j??B??Vt?x??S?v?I?w$3D??????rSX
?	?s?J??_??CnE??B}?L
?y
?H?]???????????N??F??
> ?v??ZQ??D?ZX??
'????^^A([.??)???UL^? ??%?-?
?????n???~??
??????0????~?????u?b???I^}@M^j?
)^??????Y?????$;?N??R>
> A???m?=m'0:!???<????(F#??8?7??????-CS?/?M?S?>?+?
??=???-W???s??s???
t9??Z???x??dO?38?rGm???^??7^???????????)t??-N?'?gc??????o??
??sS??d??d?nqtY?;-?K?eX??????k??V?ce?}?j?c?????????????3;?b?h??m??I????.?
?
?
|? ??	???w?R?sWH?
?
?v?m?(????U:??????
?Q:?
|?[???????["7+?a??P, O?2?|
A??"???l.0f?y?Y?3???\?????L??\?J??????
??l>??]??????????f?Uk0?????h?:
??#?B??V?0?q\?t?W)?t???f+?U~?0?G?kJF?????3Y??y?'?U??
??{u????cT?`?SP???Z;??d8.??{???xc|?6?$VW??L4?_T?h??K?rOf
?????d??	??|?j??F?FN*M6????
?????????
v??w{?d
> endstream
> endobj
> 
> 10 0 obj
> 6200
> endobj
> 
> 11 0 obj
> << /Type /FontDescriptor
>    /FontName /BAAAAA+GillSansMT-Bold
>    /Flags 4
>    /FontBBox [ -176 -229 1165 929 ]
>    /ItalicAngle 0
>    /Ascent 929
>    /Descent -230
>    /CapHeight 929
>    /StemV 80
>    /FontFile2 9 0 R
> >>
> endobj
> 
> 12 0 obj
> << /Length 383
>    /Filter /FlateDecode >>
> stream
> x?]?Mo?@??$??=???
M?EM<?#??
?%)Y???/?/????;3;??x?a{0u??w?????T??????R?Q??q

??.?;?W6E?:????.?4sj?z?:JyC???75?T?Q???f+??9??W?s)?v??4bz??N??JNc???{-Q
???j????|H??y?D\???l+?tE)?0gq????j????#???.?u<??

????Q??? ?+???"B??@???EX?
?m??<BV?X`?r??v?ao{v?G?>
?5}
??&???L>hG?'????v4}?=?>1?>1???IX`?ai??P???3}?u@??'?\0????????????Wk?
?cp????<??k;?M?_,???endstream
> endobj
> 
> 13 0 obj
> << /Type /Font
>    /Subtype /TrueType
>    /BaseFont /BAAAAA+GillSansMT-Bold
>    /FirstChar 0
>    /LastChar 34
>    /Widths [ 1000 719 405 270 541 551 448 277
>      770 676 884 551 270 551 801 530
>      583 426 604 500 583 958 270 509
>      500 594 583 520 333 583 270 509
>      583 551 583 ]
>    /FontDescriptor 11 0 R
>    /ToUnicode 12 0 R
> >>
> endobj
> 
> 14 0 obj
> << /F1 13 0 R
>    /F2 8 0 R
>    >>
> endobj
> 
> 15 0 obj
> <<
>    /Font 14 0 R
>    /ProcSet [ /PDF ]
> >>
> endobj
> 
> 16 0 obj
> << /Type /Page
>    /Parent 3 0 R
>    /Resources 15 0 R
>    /MediaBox [ 0 0 842 595 ]
>    /Contents 1 0 R
> >>
> endobj
> 
> 3 0 obj
> << /Type /Pages
>    /Resources 15 0 R
>    /MediaBox [ 0 0 595 842 ]
>    /Kids [ 16 0 R
>            ]
>    /Count 1
> >>
> endobj
> 
> 17 0 obj
> << /Type /Catalog
>    /Pages 3 0 R
> >>
> endobj
> 
> 18 0 obj
> << /Author <FEFF004A0065006E0073002000480061006D0069007300630068>
> /Creator <FEFF0044007200610077>
> /Producer <FEFF0053007400610072004F0066006600690063006500200037>
> /CreationDate (D:20060817201019+02'00')
> >>
> endobj
> 
> xref
> 0 19
> 0000000000 65535 f
> 0000000017 00000 n
> 0000001815 00000 n
> 0000017415 00000 n
> 0000001842 00000 n
> 0000008668 00000 n
> 0000008693 00000 n
> 0000008932 00000 n
> 0000009397 00000 n
> 0000009754 00000 n
> 0000016060 00000 n
> 0000016086 00000 n
> 0000016331 00000 n
> 0000016797 00000 n
> 0000017162 00000 n
> 0000017218 00000 n
> 0000017285 00000 n
> 0000017553 00000 n
> 0000017613 00000 n
> trailer
> << /Size 19
>    /Root 17 0 R
>    /Info 18 0 R
> >>
> startxref
> 17844
> %%EOF

> Database Tables
> ===============
> 
> New tables
> ----------
>     vtiger_orgunit
> 
> 	Description:
> 	    Defines a oranizational unit
> 
> 	Columns
> 	    orgunitid		serial NOT NULL
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    type		character varying(30)
> 	    name		character varying(60) NOT NULL
> 	    address		character varying(150)
> 	    city   		character varying(100)
> 	    state  		character varying(100)
> 	    country		character varying(100)
> 	    code   		character varying(30)
> 	    phone  		character varying(30)
> 	    fax    		character varying(30)
> 	    website		character varying(100)
> 
> 	Constraints:
> 	    vtiger_orgunit_pkey
> 		PRIMARY KEY (orgunitid)
> 
> 	    fk_1_vtiger_orgunit
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_orgunit_name_idx
> 		ON vtiger_orgunit
> 		USING btree (orgid, name)
> 
> 	    vtiger_orgunit_type_idx
> 		ON vtiger_orgunit
> 		USING btree (orgid, type)
> 
> 
>     vtiger_orgunittype
> 
> 	Description:
> 	    Defines the values to be entered into vtiger_orgunit.type
> 
> 	Columns:
> 	    orgunittypeid	serial NOT NULL
> 	    orgunittype		character varying(30)
> 	    sortorderid		integer DEFAULT 0 NOT NULL
> 	    presence		integer DEFAULT 1 NOT NULL
> 
> 	Constraints:
> 	    vtiger_orgunittype_pkey
> 		PRIMARY KEY (orgunittypeid)
> 	
> 	Indices:
> 	    vtiger_orgunittype_type_idx
> 		ON vtiger_orgunittype
> 		USING btree (type)
> 
> 
>     vtiger_user2org
> 
> 	Description:
> 	    Defines a list of organizations a user may work for
> 
> 	Columns:
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    userid		integer	NOT NULL DEFAULT 0
> 	    primary		boolean DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_user2org
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_user2org
> 		FOREIGN KEY (userid)
> 		REFERENCES vtiger_users(userid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_user2org_orgid_idx
> 		ON vtiger_user2org
> 		USING btree (orgid)
> 
> 	    vtiger_user2org_userid_idx
> 		ON vtiger_user2org
> 		USING btree (userid)
> 
> 
>     vtiger_user2orgunit
> 
> 	Description:
> 	    Defines a list of organizational units a user is
> 	    assigned to
> 
> 	Columns:
> 	    orgunitid		integer	NOT NULL DEFAULT 0
> 	    userid		integer	NOT NULL DEFAULT 0
> 	    primary		boolean DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_user2orgunit
> 		FOREIGN KEY (orgunitid)
> 		REFERENCES vtiger_orgunit(orgunitid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_user2orgunit
> 		FOREIGN KEY (userid)
> 		REFERENCES vtiger_users(userid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_user2orgunit_orgid_idx
> 		ON vtiger_user2orgunit
> 		USING btree (orgunitid)
> 
> 	    vtiger_user2orgunit_userid_idx
> 		ON vtiger_user2orgunit
> 		USING btree (userid)
> 
> 
>     vtiger_entity2org
> 
> 	Description:
> 	    Assignes entities to particular organizations
> 
> 	Columns:
> 	    orgid		integer	NOT NULL DEFAULT 0
> 	    crmid		integer	NOT NULL DEFAULT 0
> 	    
> 	Constraints:
> 	    fk_1_vtiger_entity2org
> 		FOREIGN KEY (orgid)
> 		REFERENCES vtiger_organizationdetails(orgid)
> 		ON DELETE CASCADE
> 
> 	    fk_2_vtiger_entity2org
> 		FOREIGN KEY (crmid)
> 		REFERENCES vtiger_crmentity(crmid)
> 		ON DELETE CASCADE
> 	
> 	Indices:
> 	    vtiger_entity2org_crmid_idx
> 		ON vtiger_entity2org
> 		USING btree (crmid)
> 
> 	    vtiger_entity2org_userid_idx
> 		ON vtiger_entity2org
> 		USING btree (userid)
> 
> 
> Changes
> -------
>     1.  vtiger_campaing should be a vtiger_crmentity
> 	-> Add the following constraint to the database
> 
> 	    fk_r_vtiger_campaign
> 		FOREIGN KEY (campaignid)
> 		REFERENCES vtiger_crmentity(crmid)
> 		ON DELETE CASCADE
> 
> 	-> Provide a migration script for already stored campaigns
> 	
> 
> PHP changes
> ===========
> Administrators Role
> -------------------
>     1.  Settings -> Company Details
> 	- ListView
> 	- Add
> 	- Delete
> 	- Change
> 
>     2.  Settings -> Users
> 	- User is a member of one or more companies
> 	  (implement like the group membership assignement)
> 	- Assign one main company to the user (out of the 
> 	  membership list).
> 
> CEO Role
> --------
>     1.  Settings -> Company Details
> 	- Change deatils only for the companies, the user has a 
> 	  CEO role for
> 
>     2.  Settings -> Company Unit
> 	- ListView
> 	- Add
> 	- Delete
> 	- Change
> 	
>     3.  Settings -> Users
> 	- User is a member of one or more organization units
> 	  (take care to provide only those units of organizations/
> 	   companies to which the user already is assigned).
> 	- Assign one main orgunit to the user (out of the 
> 	  membership list).
> 
> Standard user role
> ------------------
>     1.  login scheme
> 	After the login the authenticated user gets another 
> 	window which lets him select the organization/company
> 	he's going to act for in the new session.
> 
> 	Open item: Skip this second login step if there's only
> 	one organization assigned to that user?
> 
> 	My proposal:
> 	    For the time being: yes. 
> 	    This would be subject of further FCRs (like book-
> 	    keeping - booking date selection on login).
> 
> 	Open item: Display the organization selection somewhere
> 	during the entire session?
> 
> 	My proposal: yes, upper right corner with the user name
> 
>     2.  Assignment of entities to exactly one company/organization
> 	This affects:
> 	- Quotes
> 	- Sales orders
> 	- Invoices
> 	- Price Books
> 	The company assignement is taken from the selection, the
> 	user did during login.
> 
>     3.  Assignment of entities to more than one company/organization
> 	This affects
> 	- Leads
> 	- Accounts
> 	- Contacts
> 	- Potentials
> 	- Products
> 	- Campaigns
> 	To the modification/add forms another list entity is to
> 	be added. This list fills the crmentity2org table. Users
> 	may add/delete entries to/from this table.
> 
> 	Open item: May this table be empty?
> 
>     4.  Assignment of entities to orgunits
> 	This affects:
> 	- Quotes
> 	- Sales orders
> 	- Invoices
> 	- Price Books
> 	The company assignement is taken from the selection, the
> 	user did during login.
> 
>     5.  PDF generation
> 	Addresses to be takenout of the organization table according
> 	to the organization reference of the affected entity.
> 	Addresses may be overridden by orgunit references.
> 
> General
> -------
>     1.  The role assignments shown above results in permissions
> 	to be maintained.
> 
>     2.  Do we use the term 'company' as in the GUI or 'organization'
> 	as in the database? (No preferences from my side ... only
> 	that there should be a common understanding).
> 
>     3.  Should there be a more sophisticated relationship between
> 	entities and organizations (also orgunits)? May like
> 
> 	    If a product is assigned to company A and B:
> 	    May both companies change product details or should
> 	    there still be an ownership assigned to one of the
> 	    companies?
> 
> 	This could be done using flags in the entity2org table
> 	but would result in more sophisticated GUI operations.

> _______________________________________________
> Get started with creating presentations online - http://zohoshow.com?vt 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      




From jeri at vtiger.com  Wed Nov 15 04:24:21 2006
From: jeri at vtiger.com (Jeri John)
Date: Wed, 15 Nov 2006 17:54:21 +0530
Subject: [Vtigercrm-developers] A bug in modules/Emails/Emails.php
In-Reply-To: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
References: <479348D61212AC4DB31C9906F8C7028D48925A@EXVBE012-5.exch012.intermedia.net>
Message-ID: <10eeb932d91.-1068791366129115790.2050524429825132071@@vtiger.com>

Dear James, 
 Thanks for your fix.We have integrated it and it is available in the SVN. 
 
Thanks & Regards, 
Jerry.




---- James Tillman&lt;jamestillman at sevatechnologies.com&gt; wrote ---- 

 ((If someone would fix the forums registration, I'll gladly start posting these issues on the forums if this is not the correct venue.&nbsp; Until then, I assume reporting in some way is better than not reporting at all.)) &nbsp; modules/Emails/Emails.php seems to be lacking some key class-level fields.&nbsp; Namely, these: &nbsp; var $rel_users_table = "vtiger_salesmanactivityrel";var $rel_contacts_table = "vtiger_cntactivityrel";var $rel_serel_table = "vtiger_seactivityrel"; It makes use of these fields in its code, as in the function set_emails_contact_invitee_relationship(), but they are not set anywhere in the class. &nbsp; This problem comes to light when you attempt to use the Outlook plugin to link emails to a vtiger contact.&nbsp; You get the typical "Invalid return value from vtigerCRM" error message. &nbsp; I inserted the lines mentioned above at line 38 in Emails.php and Outlook email linking started to work. &nbsp; Most of the Outlook interaction with vtiger in&nbsp;v502&nbsp;seems to be sadly broken out of the box. &nbsp; By the way, anyone thought of improving the Outlook plugin to do something other than stupidly report that vtiger returned an invalid response?&nbsp; Having to use Fiddler or some other HTTP inspection utility to just to find the PHP error message from vtiger is time-consuming. &nbsp; jpt _______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061115/5a0a92eb/attachment-0004.html 

From philip at vtiger.com  Thu Nov 16 07:30:25 2006
From: philip at vtiger.com (Philip)
Date: Thu, 16 Nov 2006 21:00:25 +0530
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
 and general column layout
In-Reply-To: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
References: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
Message-ID: <10ef163e45a.3319490668445686029.-7775633052489133351@@vtiger.com>


Hi Niel,

Thanks for your effort in resolving the UI issue we'll test your filesin out test bed and check-in into the 5.0.3 repo if everything is fine,else we'll get back to you if we face any issue.

Regards,
Philip



---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au> wrote ---- 

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061116/92aed265/attachment-0004.html 

From dgrant at accuratetechnologies.com  Thu Nov 16 07:41:34 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Thu, 16 Nov 2006 10:41:34 -0500
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
	and general column layout
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.com>

I actually "solved" this problem a different way:

 

I have now explicitly wordwrapped all multi-line textareas to 80 chars,
both with WRAP=HARD and with a counting/wrapping function on the backend
(AJAX doesn't seem to support WRAP=HARD)

 

This way, the text entered in the textarea and the text returned from
the database wrap the same - what you see is how it is stored.

 

It's a lot simpler, and it works with AJAX.

 

DG 

 

  _____  

From: Philip [mailto:philip at vtiger.com] 
Sent: Thursday, November 16, 2006 10:30 AM
To: vtigercrm-developers at lists.vtigercrm.com
Cc: vtigercrm-developers at lists.vtigercrm.com
Subject: Re: [Vtigercrm-developers] Files to fix word wrapping of long
items and general column layout

 


Hi Niel,

Thanks for your effort in resolving the UI issue we'll test your files
in out test bed and check-in into the 5.0.3 repo if everything is fine,
else we'll get back to you if we face any issue.

Regards,
Philip



---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au>
wrote ---- 

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems
do
not wrap correctly and resizing the browser window doesn't help. See
ticket my #2564 and others. I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well;
wrapping
correctly when the user chooses to alter the width of his or her browser
window. In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's
and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo". Both of these now have a width
setting
that you can play with. You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected
because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in
lots
of places such as Change Password and Data Migration. This means that
I've
ended up tweaking (and fixing some bugs in) lots of tables. Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views". A Detail View shows the details for one item,
e.g.
a Contact, a Quote etc. Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory
tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting. These
now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View)
such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of
course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of
a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***. I've only
giving
you a new style.css for Blue Lagoon (any other theme will look a mess
with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you
can!

4) Now resize your browser window and check that everything wraps
neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css. This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these
files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been
used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View. This is causing confusion. For example there are multiple
styles defining the same heading of different tables both using Detail
View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having
four
columns: Label, Data, Label, Data. The headings for many different types
of tables are substantially identical. Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell
level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox"> 
may not do what you want since the class setting always takes precedence
over the "align". The better choice is this 
<td style="text-align:left;" class="txtBox"> 
which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout. Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored
with
the link information for the image. Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells. In the
past
they used to be required to ensure a cell would display properly. If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left
aligned),
e.g. <td>{$data}&nbsp;</td> NOT <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of
these
changes. I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful. I spent a reasonable time
reformatting. (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 
_______________________________________________
Reach hundreds of potential candidates - http://jobs.vtiger.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061116/84365744/attachment-0004.html 

From neil.temperley at exemail.com.au  Thu Nov 16 15:59:38 2006
From: neil.temperley at exemail.com.au (neil.temperley at exemail.com.au)
Date: Fri, 17 Nov 2006 10:59:38 +1100 (EST)
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
 and general column layout
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.co
	m>
References: <3E26E7A199CABA49822B3E6B741434F9010C4D9F@exch.accuratetechnologies.com>
Message-ID: <4257.203.143.170.20.1163721578.squirrel@webmail.exetel.com.au>

Hi Dennis,

Basically what I did was reduce the number of hard wired overrides to the
default style to a minimum and I also eliminated nowraps.  A nowrap on one
cell will often affect a whole column.

Since a 4 column "Detail View" is a standard table layout, I was able to
move the column width info into style.css.  This gives a knowledgable user
nice control over the relative column widths of a "Detail View" by
tweaking column width settings.

But the biggest gain is that all columns resize correctly to the window
width of the user's browser.  This is really nice.  Any user can resize
the window to suit their preference and the columns self adjust and wrap
accordingly.

Since the browser does the wrapping work it works with AJAX (and
multibyte) without additional coding.

Finally I was able to maximise the space for Notes and Descriptions etc by
getting them to span the full row.


BTW, several months back I helped implement code to force a wrap of
Multi-select combo box lists in Smarty, but this (as you know) required a
matching JavaScript fix for AJAX as well.  I always felt this was a
kludge; a hardwired column width that ignores the users browser window
should be avoided if possible.  With the new files I removed the 'kludge'.

regards,
Neil

> I actually "solved" this problem a different way:
>
>
>
> I have now explicitly wordwrapped all multi-line textareas to 80 chars,
> both with WRAP=HARD and with a counting/wrapping function on the backend
> (AJAX doesn't seem to support WRAP=HARD)
>
>
>
> This way, the text entered in the textarea and the text returned from
> the database wrap the same - what you see is how it is stored.
>
>
>
> It's a lot simpler, and it works with AJAX.
>
>
>
> DG
>
>
>
>   _____
>
> From: Philip [mailto:philip at vtiger.com]
> Sent: Thursday, November 16, 2006 10:30 AM
> To: vtigercrm-developers at lists.vtigercrm.com
> Cc: vtigercrm-developers at lists.vtigercrm.com
> Subject: Re: [Vtigercrm-developers] Files to fix word wrapping of long
> items and general column layout
>
>
>
>
> Hi Niel,
>
> Thanks for your effort in resolving the UI issue we'll test your files
> in out test bed and check-in into the 5.0.3 repo if everything is fine,
> else we'll get back to you if we face any issue.
>
> Regards,
> Philip
>
>
>
> ---- On Mon, 13 Nov 2006 Neil Temperley <neil.temperley at exemail.com.au>
> wrote ----
>
> Dear vtiger developers,
>
> please find attached a gzipped tar file of changes I'm suggesting to the
> vtiger user interface to cope with the problem that long item problems
> do
> not wrap correctly and resizing the browser window doesn't help. See
> ticket my #2564 and others. I've made these corrections to SVN 9765.
>
> In particular my aim was to make all "Detail Views" format well;
> wrapping
> correctly when the user chooses to alter the width of his or her browser
> window. In particular I wanted to ensure that fields such as Comments,
> Notes, Description, Terms & Conditions, Mailing Street and Multi-select
> Combo Boxes worked correctly with long items regardless of window width.
> Also, I've ensured that these wide items (including Contact Image (i.e.
> Photo)) now span multiple columns to provide a neater layout.
>
> With these changes, the user has significant control over column width's
> and
> layout in Detail Views by altering the two classes in the style.css file
> ".dvtCellLabel" and ".dvtCellInfo". Both of these now have a width
> setting
> that you can play with. You can choose values that give you column
> proportions pretty similar to vtiger's existing proportions, or you can
> choose values that enable more data to be fitted to the screen.
>
> Unfortunately, to implement these changes many files were affected
> because
> these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in
> lots
> of places such as Change Password and Data Migration. This means that
> I've
> ended up tweaking (and fixing some bugs in) lots of tables. Where
> reasonable I've tried to replace the use of these with the more generic
> .cellLabel and .cellInfo.
>
> Some of the "tables" affected are as follows.
>
> 1) All "Detail Views". A Detail View shows the details for one item,
> e.g.
> a Contact, a Quote etc. Detail Views are found in Contacts, Leads,
> Potentials, Accounts, Notes, User and all the items under the Inventory
> tab,
> e.g. Quotes and Invoices.
>
> 2) The Advance Filter tables used in Custom View and Reporting. These
> now
> resize well and can accept long "OR" combinations of search strings.
>
> 3) Odd places (which in my mind do not really constitute a Detail View)
> such
> as Change Password, Convert Lead, Calendar and Data Migration.
>
> Files most affected are:
> DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of
> course.
>
>
> How to proceed.
>
> 1) Untar the archive files into your vtigercrm root directory on top of
> a
> SVN 9765 version.
>
> 2) Log-on to vtiger using the *** Blue Lagoon Theme ***. I've only
> giving
> you a new style.css for Blue Lagoon (any other theme will look a mess
> with
> no word wrapping)!!!!
>
> 3) Edit a Contact and create lots of long entries in every field you
> can!
>
> 4) Now resize your browser window and check that everything wraps
> neatly.
>
> 5) If you want to play with the layout: in themes, open
> bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
> For experts, you may want to copy bluelagoon/style-developer.css to
> bluelagoon/style.css. This will give you a fairly ugly colour scheme but
> will clearly show the places that have been affected by my changes.
>
> 6) Note I reformatted the indentation of portions of the code in these
> files
> where I thought indentation was poor or hard to follow.
>
>
> Some of the things that I have learnt through this process.
>
> 1) There are multiple style classes used in vtiger and some have been
> used
> inconsistently.
> One problem is that there is no clear definition of what constitutes a
> Detail View. This is causing confusion. For example there are multiple
> styles defining the same heading of different tables both using Detail
> View
> style classes, e.g. .detailedViewHeader and .dvInnerHeader.
>
> I'd like to suggest that we restrict Detail View tables to those having
> four
> columns: Label, Data, Label, Data. The headings for many different types
> of tables are substantially identical. Rather than create new style for
> every situation or table, it is probably best to minimise the number of
> styles and use generic names such as .headingLevel2 or .selectBox where
> possible.
>
> 2) Note that HTML statements such as <table class='small'> or <tr
> class='small'> don't seem to propagate the font style down to cell
> level.
> I'm not sure why not.
>
> 3) Note also that an HTML statement like:
> <td align="left" class="txtBox">
> may not do what you want since the class setting always takes precedence
> over the "align". The better choice is this
> <td style="text-align:left;" class="txtBox">
> which will always work.
>
> 4) One nowrap type item in a table cell can turn off wrapping for the
> **whole column** of data and ruin the layout. Avoid using nowrap!
>
> 5) I couldn't resize images since the HTML sizing seems to be stored
> with
> the link information for the image. Photos are too large by default.
>
> 6) I don't think &nbsp; codes are required in empty data cells. In the
> past
> they used to be required to ensure a cell would display properly. If you
> need to include one, put it **after** the data not in front so that the
> alignment of the data is not disturbed (assuming the data is left
> aligned),
> e.g. <td>{$data}&nbsp;</td> NOT <td>&nbsp;{$data}</td>.
>
>
> Please let me know if you find any formatting disasters as a result of
> these
> changes. I've tried this with Firefox 1.5 and IE 6.0.
>
> I tried hard to be neat and careful. I spent a reasonable time
> reformatting. (Yes, I spent way way too long on this :-))
>
> Best regards,
> Neil
>
> Neil Temperley
> Skype: neil.temperley
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com
>
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com




From Dirk.Gorny at genion.de  Fri Nov 17 01:48:57 2006
From: Dirk.Gorny at genion.de (Dirk Gorny)
Date: Fri, 17 Nov 2006 10:48:57 +0100
Subject: [Vtigercrm-developers] MySQL Migration Tool
In-Reply-To: <F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
References: <20061105144559.61411.qmail@web37308.mail.mud.yahoo.com>
	<07869E2C-8A30-42A2-83BD-E444B3EC1970@artoge.nl>
	<F01A67FB-CC92-41EB-9D78-080B05F70FE5@artoge.nl>
Message-ID: <200611171048.58005.Dirk.Gorny@genion.de>

Am Montag, 6. November 2006 17:57 schrieb Dhr. R.R. Gerbrands:

> @Dirk, could you give us your idea's on more specific improvements,
> compared with openCRX?

For sure, at first it is supports high class DBMS like DB2, Oracle, and 
MS-SQL.
- openCRX is a completely i18n application with many supportet languages. 
English, German, Spanisch, Chinese, French, Polish , Portuguese, Russian, 
Swedish, Turkish, and Farsi are included.
- For integration it supports RMI, CORBA, JMS, JCA.
- You need only one deployment and one set of tables to manage a hundred of 
different mandators.
- there is the possibility to export and import complex objects with their 
substructure in XML.
-You can sync Offline/Mobile Client and Server.

These are only a few things. The most you can see at 
http://www.opencrx.org/tour-features.htm.

Depending on the architecture (J2EE, OMG/MDA) they work with a core team 
consists of 3 people.

Best regards,

Dirk


From naterajj at hotmail.com  Mon Nov 20 11:00:47 2006
From: naterajj at hotmail.com (Juan Natera)
Date: Mon, 20 Nov 2006 11:00:47 -0800
Subject: [Vtigercrm-developers] Adding another asigned user's field to the
	Lead's Module
Message-ID: <BAY116-F30A4A860B57C70A6348D96C2ED0@phx.gbl>

Hi,

I need to have 2 users assigned per Lead, I was looking for recomendations 
on how to do this, Adding a regular custom field with users from the 
settings page won't acomplish what we want, since we need the 
notifications/reports and such to affect both users.

Thanks in advance,

Juan Natera

_________________________________________________________________
Get the latest Windows Live Messenger 8.1 Beta version.?Join now. 
http://ideas.live.com



From joe at tsolucio.com  Mon Nov 20 11:25:28 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Mon, 20 Nov 2006 20:25:28 +0100
Subject: [Vtigercrm-developers] Is the list active?
Message-ID: <1164050728.2936.34.camel@joesunix.int>

Hi,

For some time now there is very little activity on this list. The last
4/5 emails I have sent haven't been answered, fixed or commented on.

The ones I would like to know about are:

-> vtiger popup calendar start day of the week
-> new vtiger_entityname table
-> Latest news section in vtigerforge isn't updating
-> DMS

Is there another place where we should ask these questions?

Regards, Joe
TSolucio



From neil.temperley at exemail.com.au  Mon Nov 20 14:27:02 2006
From: neil.temperley at exemail.com.au (Neil Temperley)
Date: Tue, 21 Nov 2006 09:27:02 +1100
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
	andgeneral column layout
In-Reply-To: <000901c7070e$4fc70c90$6401a8c0@Nemrut>
Message-ID: <000001c70cf3$02f2eed0$6501a8c0@Nemrut>

Dear All,

This archive has some minor fixes to two files in the version I sent
previously.  Additional altered files fix a layout issue for "Edit" and
"Create" views... now the spacing/layout of the copy address radio buttons
is improved.  (As far as I can tell these files can be dropped on top of SVN
9848 and everything works OK.)

Regards,
Neil

-----Original Message-----
From: vtigercrm-developers-bounces at lists.vtigercrm.com
[mailto:vtigercrm-developers-bounces at lists.vtigercrm.com] On Behalf Of Neil
Temperley
Sent: Monday, 13 November 2006 21:27
To: vtigercrm-developers at lists.vtigercrm.com
Subject: [Vtigercrm-developers] Files to fix word wrapping of long items
andgeneral column layout

Dear vtiger developers,

please find attached a gzipped tar file of changes I'm suggesting to the
vtiger user interface to cope with the problem that long item problems do
not wrap correctly and resizing the browser window doesn't help.   See
ticket my #2564 and others.  I've made these corrections to SVN 9765.

In particular my aim was to make all "Detail Views" format well; wrapping
correctly when the user chooses to alter the width of his or her browser
window.  In particular I wanted to ensure that fields such as Comments,
Notes, Description, Terms & Conditions, Mailing Street and Multi-select
Combo Boxes worked correctly with long items regardless of window width.
Also, I've ensured that these wide items (including Contact Image (i.e.
Photo)) now span multiple columns to provide a neater layout.

With these changes, the user has significant control over column width's and
layout in Detail Views by altering the two classes in the style.css file
".dvtCellLabel" and ".dvtCellInfo".  Both of these now have a width setting
that you can play with.  You can choose values that give you column
proportions pretty similar to vtiger's existing proportions, or you can
choose values that enable more data to be fitted to the screen.

Unfortunately, to implement these changes many files were affected because
these two CSS style classes .dvtCellLabel and .dvtCellInfo are used in lots
of places such as Change Password and Data Migration.   This means that I've
ended up tweaking (and fixing some bugs in) lots of tables.  Where
reasonable I've tried to replace the use of these with the more generic
.cellLabel and .cellInfo.

Some of the "tables" affected are as follows.

1) All "Detail Views".   A Detail View shows the details for one item, e.g.
a Contact, a Quote etc.  Detail Views are found in Contacts, Leads,
Potentials, Accounts, Notes, User and all the items under the Inventory tab,
e.g. Quotes and Invoices. 

2) The Advance Filter tables used in Custom View and Reporting.  These now
resize well and can accept long "OR" combinations of search strings.

3) Odd places (which in my mind do not really constitute a Detail View) such
as Change Password, Convert Lead, Calendar and Data Migration.

Files most affected are:
DetailViewUI.tpl, DetailView.tpl, DisplayFields.tpl and style.css of course.


How to proceed.

1) Untar the archive files into your vtigercrm root directory on top of a
SVN 9765 version.

2) Log-on to vtiger using the *** Blue Lagoon Theme ***.  I've only giving
you a new style.css for Blue Lagoon (any other theme will look a mess with
no word wrapping)!!!!

3) Edit a Contact and create lots of long entries in every field you can!

4) Now resize your browser window and check that everything wraps neatly.

5) If you want to play with the layout: in themes, open
bluelagoon/style.css, search for .dvtCellLabel, and read my notes.
For experts, you may want to copy bluelagoon/style-developer.css to
bluelagoon/style.css.  This will give you a fairly ugly colour scheme but
will clearly show the places that have been affected by my changes.

6) Note I reformatted the indentation of portions of the code in these files
where I thought indentation was poor or hard to follow.


Some of the things that I have learnt through this process.

1) There are multiple style classes used in vtiger and some have been used
inconsistently.
One problem is that there is no clear definition of what constitutes a
Detail View.  This is causing confusion.  For example there are multiple
styles defining the same heading of different tables both using Detail View
style classes, e.g. .detailedViewHeader and .dvInnerHeader.

I'd like to suggest that we restrict Detail View tables to those having four
columns: Label, Data, Label, Data.   The headings for many different types
of tables are substantially identical.  Rather than create new style for
every situation or table, it is probably best to minimise the number of
styles and use generic names such as .headingLevel2 or .selectBox where
possible.

2) Note that HTML statements such as <table class='small'> or <tr
class='small'> don't seem to propagate the font style down to cell level.
I'm not sure why not.

3) Note also that an HTML statement like:
<td align="left" class="txtBox">
may not do what you want since the class setting always takes precedence
over the "align".  The better choice is this <td style="text-align:left;"
class="txtBox"> which will always work.

4) One nowrap type item in a table cell can turn off wrapping for the
**whole column** of data and ruin the layout.  Avoid using nowrap!

5) I couldn't resize images since the HTML sizing seems to be stored with
the link information for the image.  Photos are too large by default.

6) I don't think &nbsp; codes are required in empty data cells.  In the past
they used to be required to ensure a cell would display properly.  If you
need to include one, put it **after** the data not in front so that the
alignment of the data is not disturbed (assuming the data is left aligned),
e.g. <td>{$data}&nbsp;</td>  NOT  <td>&nbsp;{$data}</td>.


Please let me know if you find any formatting disasters as a result of these
changes.  I've tried this with Firefox 1.5 and IE 6.0.

I tried hard to be neat and careful.  I spent a reasonable time
reformatting.  (Yes, I spent way way too long on this :-))

Best regards,
Neil

Neil Temperley
Skype: neil.temperley 

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.14.3/530 - Release Date: 11/11/06
18:53
 
    
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtiger-Neil-20061121.tar.gz
Type: application/x-gzip
Size: 85673 bytes
Desc: not available
Url : http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/e18da66b/attachment-0003.gz 

From g.un at freemail.hu  Mon Nov 20 15:14:30 2006
From: g.un at freemail.hu (mikozod hozza)
Date: Tue, 21 Nov 2006 00:14:30 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
Message-ID: <freemail.20061021001430.78055@fm13.freemail.hu>

Hello,

 I would need help why the example at
http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
does not work for me.
I have installed vTiger 5.2.0 on Linux box.
I put this query:
"insert into vtiger_field values( 4, '',
'event_time','vtiger_login_hist', 2, 5, 'event_time',
'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
vtiger_login_hist is my prop table., event_time is one of
its field.
Then I got some error when visiting a certain Contact:
"Fatal error: Call to a member function Move() on a
non-object in
/var/www/vtigercrm/include/database/PearDatabase.php "
This error comes from query_result function.
When I switched on debugging info it was seen that result
parameter received here was empty.
Actually I don't know what I made wrong.
The whole purpose of my experiment would be to have a
proprietary field on Contacts/More information.
I hope some one can help me here.

br,

Gabor

______________________________________________________________________
KGFB-2007 az Els? Online Alkuszt?l! K?sse n?lunk ?jra k?telez? biztos?t?s?t! 
Az ?sszes biztos?t? egy helyen, Online kedvezm?nyek, egyszer? ?gymenet.
http://www.netrisk.hu





From dan.means at teamsrs.com  Mon Nov 20 18:45:07 2006
From: dan.means at teamsrs.com (Dan Means)
Date: Mon, 20 Nov 2006 18:45:07 -0800
Subject: [Vtigercrm-developers] Is the list active?
In-Reply-To: <1164050728.2936.34.camel@joesunix.int>
References: <1164050728.2936.34.camel@joesunix.int>
Message-ID: <45626833.2030901@teamsrs.com>

I think everybody's just exhausted and busy...

Joe Bordes wrote:

>Hi,
>
>For some time now there is very little activity on this list. The last
>4/5 emails I have sent haven't been answered, fixed or commented on.
>
>The ones I would like to know about are:
>
>-> vtiger popup calendar start day of the week
>-> new vtiger_entityname table
>-> Latest news section in vtigerforge isn't updating
>-> DMS
>
>Is there another place where we should ask these questions?
>
>Regards, Joe
>TSolucio
>
>_______________________________________________
>Reach hundreds of potential candidates - http://jobs.vtiger.com 
>
>  
>

-- 
Dan Means
Mission Viejo, CA
www.dkmeansonline.com
www.teamsrs.com



From joe at tsolucio.com  Tue Nov 21 01:08:59 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 10:08:59 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021001430.78055@fm13.freemail.hu>
References: <freemail.20061021001430.78055@fm13.freemail.hu>
Message-ID: <1164100139.10220.3.camel@joesunix.int>

The second value of your insert is an empty string. It should be a
numeric value obtained from the function getUniqueID("vtiger_field").


El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> Hello,
> 
>  I would need help why the example at
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> does not work for me.
> I have installed vTiger 5.2.0 on Linux box.
> I put this query:
> "insert into vtiger_field values( 4, '',
> 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> vtiger_login_hist is my prop table., event_time is one of
> its field.
> Then I got some error when visiting a certain Contact:
> "Fatal error: Call to a member function Move() on a
> non-object in
> /var/www/vtigercrm/include/database/PearDatabase.php "
> This error comes from query_result function.
> When I switched on debugging info it was seen that result
> parameter received here was empty.
> Actually I don't know what I made wrong.
> The whole purpose of my experiment would be to have a
> proprietary field on Contacts/More information.
> I hope some one can help me here.
> 
> br,
> 
> Gabor
> 
> ______________________________________________________________________
> KGFB-2007 az Els? Online Alkuszt?l! K?sse n?lunk ?jra k?telez? biztos?t?s?t! 
> Az ?sszes biztos?t? egy helyen, Online kedvezm?nyek, egyszer? ?gymenet.
> http://www.netrisk.hu
> 
> 
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 



From joe at tsolucio.com  Tue Nov 21 01:10:14 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 10:10:14 +0100
Subject: [Vtigercrm-developers] Is the list active?
In-Reply-To: <45626833.2030901@teamsrs.com>
References: <1164050728.2936.34.camel@joesunix.int>
	<45626833.2030901@teamsrs.com>
Message-ID: <1164100214.10220.4.camel@joesunix.int>

Ok, that's normal. At least I know I am on the right list :-)

Thanks, Joe
El lun, 20-11-2006 a las 18:45 -0800, Dan Means escribi?:
> I think everybody's just exhausted and busy...
> 
> Joe Bordes wrote:
> 
> >Hi,
> >
> >For some time now there is very little activity on this list. The last
> >4/5 emails I have sent haven't been answered, fixed or commented on.
> >
> >The ones I would like to know about are:
> >
> >-> vtiger popup calendar start day of the week
> >-> new vtiger_entityname table
> >-> Latest news section in vtigerforge isn't updating
> >-> DMS
> >
> >Is there another place where we should ask these questions?
> >
> >Regards, Joe
> >TSolucio
> >
> >_______________________________________________
> >Reach hundreds of potential candidates - http://jobs.vtiger.com 
> >
> >  
> >
> 



From alex.svetos at gmail.com  Tue Nov 21 01:41:56 2006
From: alex.svetos at gmail.com (alex svetos)
Date: Tue, 21 Nov 2006 10:41:56 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021001430.78055@fm13.freemail.hu>
References: <freemail.20061021001430.78055@fm13.freemail.hu>
Message-ID: <26debbf70611210141u4d62a48fw1a3c5f9ac3e75e68@mail.gmail.com>

> Hello,
>
> I would need help why the example at
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> does not work for me.
> I have installed vTiger 5.2.0 on Linux box.
> I put this query:
> "insert into vtiger_field values( 4, '',
> 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> vtiger_login_hist is my prop table., event_time is one of
> its field.
> Then I got some error when visiting a certain Contact:
> "Fatal error: Call to a member function Move() on a
> non-object in
> /var/www/vtigercrm/include/database/PearDatabase.php "
> This error comes from query_result function.
> When I switched on debugging info it was seen that result
> parameter received here was empty.
> Actually I don't know what I made wrong.
> The whole purpose of my experiment would be to have a
> proprietary field on Contacts/More information.
> I hope some one can help me here.
>
> br,
>
> Gabor


Hi,

I don't understand what you want to do. But if you want to add a new field
in a Contact you should do something like this :
if you want to add a new field on Contact, assuming your field ids called
'card_number' you should insert a new line in vtiger field with thoses
values :

insert into a vtiger_contact values (4, an_unused_field_id, 'card_number',
'card_number',
'vtiger_contactdetails',1,7,'card_number','card_number',1,0,0,15,0,4,1,'I~O',1,NULL,'ADV'
)

And add a the new column in vtiger_contactdetails.

(assuming your new field is called 'mobile_phone' and is used to store a
phone number.)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/a5221807/attachment-0004.html 

From sergiokessler at gmail.com  Tue Nov 21 04:54:56 2006
From: sergiokessler at gmail.com (Sergio A. Kessler)
Date: Tue, 21 Nov 2006 09:54:56 -0300
Subject: [Vtigercrm-developers] separation in calendar
Message-ID: <49216030611210454q7739413cs7bccead9f47e0098@mail.gmail.com>

in the calendar screen there is a visual separation between events of types:

Call & Meetings (left tab)
To Dos (right tab)

but the button "Add" permit to add any type of event (Call, Meeting or
ToDo event)...

why there is two tabs ?

would'n it be better if the daily, weekly views show the three events
types without any tabs ??


salute,
/sergio


From g.un at freemail.hu  Tue Nov 21 06:19:02 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 15:19:02 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164100139.10220.3.camel@joesunix.int>
Message-ID: <freemail.20061021151902.54391@fm10.freemail.hu>

hi

> The second value of your insert is an empty string. It
should be a
> numeric value obtained from the function
getUniqueID("vtiger_field").
Actually it is enough if you issue this query in mysql. I
have used this query in mysql and it always assigns a unique
value there.

> 

> 
> El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> > Hello,
> > 
> >  I would need help why the example at
> >
http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> > does not work for me.
> > I have installed vTiger 5.2.0 on Linux box.
> > I put this query:
> > "insert into vtiger_field values( 4, '',
> > 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> > 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> > vtiger_login_hist is my prop table., event_time is one of
> > its field.


___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From g.un at freemail.hu  Tue Nov 21 06:25:58 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 15:25:58 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <26debbf70611210141u4d62a48fw1a3c5f9ac3e75e68@mail.gmail.com>
Message-ID: <freemail.20061021152558.6346@fm10.freemail.hu>



alex svetos <alex.svetos at gmail.com> ?rta:

> I don't understand what you want to do. But if you want to
add a new field

Actually I have defined a new table in vtiger database
(vtiger_login_hist). I wan to make the certain contact's
last login time to be displayed on Contacts/More Information
tab.
Technically I don't know for 100% sure how this should be
achieved. This is why I bother you here on this list:)
I have made some attempt based on online documentation on
vtiger page but those were failed. And I don't know where to
start to looking for my fault.  

> in a Contact you should do something like this :
> if you want to add a new field on Contact, assuming your
field ids called
> 'card_number' you should insert a new line in vtiger field
with thoses
> values :
> 
> insert into a vtiger_contact values (4,
an_unused_field_id, 'card_number',
> 'card_number',
>
'vtiger_contactdetails',1,7,'card_number','card_number',1,0,0,15,0,4,1,'I~O',1,NULL,'ADV'
> )
> 
> And add a the new column in vtiger_contactdetails.
> 
> (assuming your new field is called 'mobile_phone' and is
used to store a
> phone number.)
> 
Did I get it right that I have to update three tables in
database for this case? These table are: vtiger_field,
vtiger_contact and vtiger_contactdetails, aren't they?

thanks for help so far!

Gabor

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From joe at tsolucio.com  Tue Nov 21 06:56:24 2006
From: joe at tsolucio.com (Joe Bordes)
Date: Tue, 21 Nov 2006 15:56:24 +0100
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <freemail.20061021151902.54391@fm10.freemail.hu>
References: <freemail.20061021151902.54391@fm10.freemail.hu>
Message-ID: <1164120984.10220.52.camel@joesunix.int>

HI,

El mar, 21-11-2006 a las 15:19 +0100, gabor escribi?:
> hi
> 
> > The second value of your insert is an empty string. It
> should be a
> > numeric value obtained from the function
> getUniqueID("vtiger_field").
> Actually it is enough if you issue this query in mysql. I
> have used this query in mysql and it always assigns a unique
> value there.

Yes, this is because the field is defined as an auto-increment. The
problem is that this procedure does NOT update the value in
vtiger_field_seq so any new module or maybe some patches are going to
get into trouble with overwritten field values. It's OK if your sure you
are never going to add anything somebody else has done.

The correct way to do this is launch the SQL insert and then modify the
value in vtiger_field_seq accordingly.

Joe
TSolucio
> 
> > 
> 
> > 
> > El mar, 21-11-2006 a las 00:14 +0100, mikozod hozza escribi?:
> > > Hello,
> > > 
> > >  I would need help why the example at
> > >
> http://wiki.vtiger.com/index.php/Creating_New_Fields_in_Existing_Modules
> > > does not work for me.
> > > I have installed vTiger 5.2.0 on Linux box.
> > > I put this query:
> > > "insert into vtiger_field values( 4, '',
> > > 'event_time','vtiger_login_hist', 2, 5, 'event_time',
> > > 'Event', 0, 0, 0,100, 2, 5, 1, 'DT~O',  1,  0, 'BAS' );"
> > > vtiger_login_hist is my prop table., event_time is one of
> > > its field.
> 
> 
> ___________________________________________________________
> A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
> http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm
> 
> 
> 
> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 



From oded at atelis.net  Tue Nov 21 07:24:22 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 17:24:22 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <1164122662.13078.56.camel@x-23.atelis.net>


Hi all.

I'm evaluating vTiger CRM for my company, and there are several issues
where either I don't understand how to do things using vTiger CRM or
vTiger CRM is missing important functionality (important to my company ,
anyway ;-).

If its ok, I'd like to raise these issues here - not all at once, of
course - and get some feedback, and possibly solutions to these.

I'll start with the first question then:
We've developed an in-house inventory management application to manager
our sales of hardware products - we are resellers for a company that
manufactures extension cards for PCs. Each such card has a name, model
number and a serial number, where the serial number in unique for each
item - not product.

In our own inventory application, there is a "product" entity which has
a model number, and each product has several serial number assigned to
it. Due to commercial issues with out supplier (tracking eligability of
customers for support) , we need to track each item that is shipped,
using the serial number. Whenever we receive a delivery, we go over the
boxed and add the serial number of every item under the product entity
for that type of product. When we sell a product, we remove the item
serial number from the inventory.

We are not trying to use vTiger CRM to track inventory instead, but
apparently in vTiger CRM, the product entity carries the serial number,
so each product can have only one serial number available in the
inventory. This forces us to either register each boxed item we receive
as a product or ignore the serial numbers. We can't do the latter, and
the former is problematic due to several reasons:
- Creating a product entry is complicated and time consuming - creating
500 product entries for a shipment of 500 boards takes considerably more
time then recording 500 serial numbers somewhere.
- Product views (such as "Search for product" in the invoice editor)
rarely list the serial number, so you basically get a list containing
several dozens (sometimes hundreds, depending on the item) of similar
entries and one has to guess which carries the correct serial number.
- Inventory reports listing item quantity become completely useless.

Is there a way to do what we need that I wasn't aware of ?

Thanks.

--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
Nobody takes a bribe.  Of course at Christmas if you happen to hold out
your hat and somebody happens to put a little something in it, well,
that's different.
    -- New York City Police Commissioner (Ret.) William P. O'Brien,
instructions to the force.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/062e9236/attachment-0004.html 

From dgrant at accuratetechnologies.com  Tue Nov 21 07:37:31 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 21 Nov 2006 10:37:31 -0500
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>

 

 

  _____  

From: Oded Arbel [mailto:oded at atelis.net] 
Sent: Tuesday, November 21, 2006 10:24 AM
To: vtigercrm-developers at lists.vtigercrm.com
Subject: [Vtigercrm-developers] Question about the inventory mechanism

 


Hi all.

I'm evaluating vTiger CRM for my company, and there are several issues
where either I don't understand how to do things using vTiger CRM or
vTiger CRM is missing important functionality (important to my company ,
anyway ;-).

We wrote a back-end process to update the CRM with information out of
our inventory system, including stock info, etc.

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/d414d269/attachment-0004.html 

From oded at atelis.net  Tue Nov 21 07:52:42 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 17:52:42 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
Message-ID: <1164124362.13078.61.camel@x-23.atelis.net>

On Tue, 2006-11-21 at 10:37 -0500, Dennis Grant wrote:
> 
> We wrote a back-end process to update the CRM with information out of
> our inventory system, including stock info, etc.


But how did you solve the serial number issue with the CRM inventory
mechanism ? 
I can probably sync our local inventory system to vTiger CRM, but if the
vTiger CRM inventory reports will not be useful, and its not easy to use
the inventory information in other entities (such as sales and
invoices), then its kind of useless to me - we can just as easily
continue to use our inventory system w/o integration and scribble serial
numbers by hand on the invoices.

--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
You know what I did before I married?
Anything I wanted to.
    -- Henny Youngman

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/d95f406f/attachment-0004.html 

From dgrant at accuratetechnologies.com  Tue Nov 21 08:01:17 2006
From: dgrant at accuratetechnologies.com (Dennis Grant)
Date: Tue, 21 Nov 2006 11:01:17 -0500
Subject: [Vtigercrm-developers] Question about the inventory mechanism
Message-ID: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>

 

 


But how did you solve the serial number issue with the CRM inventory
mechanism ? 

 

We didn't - no need, as we don't track serial numbers like you do.

 

But the concept of coding back-end connectors to do your data entry is
valid.

 

DG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/5e68f763/attachment-0004.html 

From oded at atelis.net  Tue Nov 21 08:24:45 2006
From: oded at atelis.net (Oded Arbel)
Date: Tue, 21 Nov 2006 18:24:45 +0200
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA7@exch.accuratetechnologies.com>
Message-ID: <1164126285.13078.65.camel@x-23.atelis.net>

On Tue, 2006-11-21 at 11:01 -0500, Dennis Grant wrote:
>  
> 
>  
> 
> 
> But how did you solve the serial number issue with the CRM inventory
> mechanism ? 
> 
>  
> 
> We didn?t ? no need, as we don?t track serial numbers like you do.
> 
>  
> 
> But the concept of coding back-end connectors to do your data entry is
> valid.


It is, and I will do that if I can figure out a way to map the entities
I need to what the CRM provides.


--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
In an essay about programming, Ellen Ullman tells a great anecdote about
a programmer who was so socially inept that they could only communicate
with him via email, even they all shared the same office. She also
writes: "Pretty graphical interfaces are commonly called user-friendly.
But they are not really your friends. Underlying every user-friendly
interface is terrific contempt for the humans who will use it. ...to
build a crash-proof system, the designer must be able to imagine--and
disallow--the dumbest action possible. He or she has to think of every
single stupid thing a human being could do. Gradually, over months and
years, the designer's mind creates a construct of the user as an
imbecile. This image is necessary. No crash-proof system can be built
unless it is made for an idiot." 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/a90fbeab/attachment-0004.html 

From dan.means at teamsrs.com  Tue Nov 21 08:26:57 2006
From: dan.means at teamsrs.com (Dan Means)
Date: Tue, 21 Nov 2006 08:26:57 -0800
Subject: [Vtigercrm-developers] Question about the inventory mechanism
In-Reply-To: <1164124362.13078.61.camel@x-23.atelis.net>
References: <3E26E7A199CABA49822B3E6B741434F9010C4DA5@exch.accuratetechnologies.com>
	<1164124362.13078.61.camel@x-23.atelis.net>
Message-ID: <456328D1.9070002@teamsrs.com>

An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061121/2d9213c2/attachment-0004.html 

From g.un at freemail.hu  Tue Nov 21 12:15:43 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 21:15:43 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164120984.10220.52.camel@joesunix.int>
Message-ID: <freemail.20061021211543.19078@fm08.freemail.hu>


> > Actually it is enough if you issue this query in mysql. I
> > have used this query in mysql and it always assigns a unique
> > value there.
> 
> Yes, this is because the field is defined as an
auto-increment. The
> problem is that this procedure does NOT update the value in
> vtiger_field_seq so any new module or maybe some patches
are going to
> get into trouble with overwritten field values. It's OK if
your sure you
> are never going to add anything somebody else has done.
> 
> The correct way to do this is launch the SQL insert and
then modify the
> value in vtiger_field_seq accordingly.
So, for what purpose this vtiger_field table is there? I
have a custom field in contacts (besides my problem
described earlier) and this vtiger_field table is really empty

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From g.un at freemail.hu  Tue Nov 21 12:15:43 2006
From: g.un at freemail.hu (gabor)
Date: Tue, 21 Nov 2006 21:15:43 +0100 (CET)
Subject: [Vtigercrm-developers] example does not work
In-Reply-To: <1164120984.10220.52.camel@joesunix.int>
Message-ID: <freemail.20061021211543.19078@fm08.freemail.hu>


> > Actually it is enough if you issue this query in mysql. I
> > have used this query in mysql and it always assigns a unique
> > value there.
> 
> Yes, this is because the field is defined as an
auto-increment. The
> problem is that this procedure does NOT update the value in
> vtiger_field_seq so any new module or maybe some patches
are going to
> get into trouble with overwritten field values. It's OK if
your sure you
> are never going to add anything somebody else has done.
> 
> The correct way to do this is launch the SQL insert and
then modify the
> value in vtiger_field_seq accordingly.
So, for what purpose this vtiger_field table is there? I
have a custom field in contacts (besides my problem
described earlier) and this vtiger_field table is really empty

___________________________________________________________
A legjobb AKCI?S utaz?sok oldala - Budav?r Tours
http://ad.adverticum.net/b/cl,1,6022,99401,161631/click.prm





From philip at vtiger.com  Fri Nov 24 00:04:46 2006
From: philip at vtiger.com (Philip)
Date: Fri, 24 Nov 2006 13:34:46 +0530
Subject: [Vtigercrm-developers] Status update on vtiger CRM 5.0.3
Message-ID: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>

Team,

Iam very happy to inform you all we have crossed half way mark inversion 5.0.3 development.  As of today we have fixed about 60+issues and updated the bleeding-edge demo @ 

http://en.vtiger.com/wip/index.php

Trac status:

http://vtiger.fosslabs.com/cgi-bin/trac.cgi/query?status=closed&group=owner&milestone=5.0.3&order=priority.


Based on the community feedback on quality of the product we areplanning to update the trac status on daily basis so that we canindentify any issues well in advance and avoid last minute glitches.This will also help us making the release hassle free.

We are looking forward for your help in validating the clossed issues.If there are any breakages kindly drop a mail to philip at vtiger.com sothat i can update the ticket status in trac. 

Regards,
Philip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.vtigercrm.com/pipermail/vtigercrm-developers/attachments/20061124/8c8a53f2/attachment-0004.html 

From jens at Strawberry.COM  Fri Nov 24 00:38:55 2006
From: jens at Strawberry.COM (Jens Hamisch)
Date: Fri, 24 Nov 2006 09:38:55 +0100
Subject: [Vtigercrm-developers] Status update on vtiger CRM 5.0.3
In-Reply-To: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>;
	from Philip on Fri, Nov 24, 2006 at 01:34:46PM +0530
References: <10f18fec402.-6840889294331393094.2295824973665278308@@vtiger.com>
Message-ID: <20061124093855.B779@Strawberry.COM>


Hi,


PostgreSQL support is still not complete in vtigercrm release 5.0.2.
I've already sent an patch to you when 5.0 was released, but you
said to incorporate this into 5.0.1 ...

In 5.1_jens the PostgreSQL support is fine. 5.1_jens is based on 5.0.2.
I may extract the PostgreSQL related diffs between 5.0.2 and 5.1_jens and
hand them over to you as a patch until sunday ...
Should I? 


Kind regards,
Jens
On Fri, Nov 24, 2006 at 01:34:46PM +0530, Philip wrote:
> Team,
> 
> Iam very happy to inform you all we have crossed half way mark inversion 5.0.3 development.  As of today we have fixed about 60+issues and updated the bleeding-edge demo @ 
> 
> http://en.vtiger.com/wip/index.php
> 
> Trac status:
> 
> http://vtiger.fosslabs.com/cgi-bin/trac.cgi/query?status=closed&group=owner&milestone=5.0.3&order=priority.
> 
> 
> Based on the community feedback on quality of the product we areplanning to update the trac status on daily basis so that we canindentify any issues well in advance and avoid last minute glitches.This will also help us making the release hassle free.
> 
> We are looking forward for your help in validating the clossed issues.If there are any breakages kindly drop a mail to philip at vtiger.com sothat i can update the ticket status in trac. 
> 
> Regards,
> Philip

> _______________________________________________
> Reach hundreds of potential candidates - http://jobs.vtiger.com 


-- 

--------------------------------------------------------------------------------
     /
 +##+|##+   STRAWBERRY                     Jens Hamisch
+v#+v v##+  EDV-Systeme GmbH               Managing director
/ v    v\v
| . .  . |  Waldeckstr. 9a                 Car (Voice):  (+49 172) 81 04 162
|     .  |  D-82515 Wolfratshausen         Voice:        (+49 8171) 41805-0
 | .     |                                 Fax:          (+49 8171) 41805-59
 \   .  /   Tel.: (+49 8171) 41805-0       Email:        jens at Strawberry.COM
  \____/    Strawberry at Strawberry.COM      



From gregory.machin at gmail.com  Wed Nov 29 04:32:54 2006
From: gregory.machin at gmail.com (Gregory Machin)
Date: Wed, 29 Nov 2006 14:32:54 +0200
Subject: [Vtigercrm-developers] vtigercrm nubee
Message-ID: <30200a940611290432s3c146c22h2deecc7b74021ad3@mail.gmail.com>

Hi All.
I'm trying to install my, vtiger 5.0.2 from the tgz file..
and I get the following on the finish step ....

Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to
allocate 64 bytes) in
/var/www/html/vtigercrm/adodb/adodb-xmlschema.inc.php on line 1656

Im using Fedora Core 6 64_bit
AMD Turion 64 3Hz
1Gig Ram
apache 2.2.3
php 5.1.6

php.ini ...
<snip>
max_execution_time = 300     ; Maximum execution time of each script, in second
max_input_time = 60     ; Maximum amount of time each script may spend parsing
memory_limit = 512M      ; Maximum amount of memory a script may consume
</snip>

I started out memory_limit = 32M then 64M then 128M then got peeved
and set it to 512M
and still the same error..

I have played with all the setting I know and have used to resolve,
similar problems before ..
I'm stumped ...

please help

Many thanks


-- 
Gregory Machin
gregory.machin at gmail.com
www.linuxpro.co.za